Owner’s Manual Wireless Speaker EN
Thank you for purchasing this Yamaha product. This wireless speaker is a Bluetooth® speaker that you can take anywhere you like and enjoy music from a smart device whenever you want to. Be sure to read the included Safety Brochure to ensure proper and safe use. Keep it readily available for future reference.
Included accessories USB cable (for charging the unit; 1 m, Type A to Type C) Quick Start Guide Safety Brochure 3 En
Control buttons Power button Power lamp R Play/Pause button Volume buttons During playback, press the button twice quickly to skip to the next song, or three times to skip backward to the beginning of the current song or previous song. Adjust the volume. Q Clear Voice button Clear Voice lamp When the Clear Voice function is enabled, the Clear Voice lamp glows, and human voices such as dialog in the audio can be heard more clearly.
Charging the unit Do not charge the unit when it is wet. Charging with liquid or foreign matter on the terminals may cause fire, explosion, liquid leakage, electric shock, or malfunction. CAUTION Use a commercially available USB power adapter that can output DC 5 V (2 A or more) when charging the unit. A charging cradle (Yamaha CC-T1A; sold separately) can also be used to charge the unit.
Turning on the unit 1・・ ・2・・ ・ Hold down the power button to turn on the unit. The power lamp flashes to inform you of the remaining battery level. − Flashing white: Remaining battery level is more than half. − Flashing orange: Remaining battery level is less than half. After showing the remaining battery level, the unit turns on.
Connecting a Bluetooth® device A Bluetooth device can be connected when the power lamp is flashing blue. NOTE • If other Bluetooth devices have been connected before, the unit will connect to the last connected device when the unit is turned on. To connect a new Bluetooth device, disconnect the currently connected Bluetooth device and then connect the new device. • To terminate the Bluetooth connection from this unit, press the volume (−) button and Play/Pause (R) ( p.
Troubleshooting Try following the instructions described in “Troubleshooting” first when the unit does not function properly. If an error occurs, the lamp flashes to notify you. See “List of lamp displays” ( p. 13) for details. If the unit does not function properly after following the instructions to solve the problem, restart or initialize it. ( p.
The unit cannot be turned on The power button is not being pressed and held. To turn on the unit, press and hold the power button for at least three seconds. ( p. 6) The remaining battery level is low. Charge the unit. ( p. 5) Ambient temperature is too high or too low. Use the unit within the operating temperature range. ( p. 15) The unit turns off suddenly The remaining battery level is low. Charge the unit. ( p.
The unit cannot be connected to a Bluetooth device The name of this unit is not displayed in the list of available devices to connect to on the Bluetooth device. Try disabling and re-enabling the Bluetooth function of the Bluetooth device. The name of this unit may then be displayed. This unit cannot be connected to the Bluetooth device even though the name of the unit is displayed in the list of available devices to connect to on the Bluetooth device.
No sound The unit and Bluetooth device are not connected. Connect to the Bluetooth device. ( p. 7) The volume is too low. Turn up the volume. ( p. 4) Broken, distorted, or unusual sound is heard from the unit The volume is too high. Turn down the volume. ( p. 4) Electromagnetic waves being emitted from devices using 2.4 GHz (such as microwave ovens or wireless devices) are obstructing the wireless communication. Do not use the unit near such devices.
Restarting or initializing the unit If the unit does not function properly after following the instructions described in “Troubleshooting”, restart or initialize (factory reset) the unit. Restarting the unit Press and hold the power button for at least 10 seconds to restart the unit. The connection information will not be deleted even if the unit is restarted. If the unit does not turn on automatically after restarting, press and hold the power button for at least three seconds to turn on the unit.
List of lamp displays The status of this unit is shown by the color of the lamp (white, blue, or orange) and by glowing/ flashing. Power lamp Clear Voice lamp Power status − On Connected to a Bluetooth device − − On Waiting for the Bluetooth connection − − On Charging (when the unit is connected to a Bluetooth device) − − Standby Charging − − Standby Charging is completed or the unit is in standby state. − − On Remaining battery level is less than 20%.
Power lamp Clear Voice lamp The power lamp and Clear Voice lamp are flashing. − Flashing orange Flashing orange and white alternately − Power status On/Standby Status of the unit Solution Unplug the USB power adapter from the AC wall outlet, and then plug it in An error occurred* again. If the lamps are still flashing, restart the unit. ( p. 12) Unplug the USB power adapter from the AC wall outlet, On/Standby (in An error occurred* and then plug it in charging state) again after 5 to 10 minutes.
Specifications Bluetooth Bluetooth version Bluetooth Version 5.0 Supported profiles A2DP (Advanced Audio Distribution Profile) AVRCP (Audio/Video Remote Control Profile) Maximum communication range Approx. 10 m (33 ft) (without interference) Power Built-in rechargeable battery Lithium-ion battery Continuous playback time Approx. 12 hours on a full charge (IEC62396-1) Charging time Approx. 3 hours (Playback/charging time varies depending on the usage environment and conditions.
Yamaha Global Site https://www.yamaha.com/ Yamaha Downloads https://download.yamaha.