EN DE FR ES PT IT RU JA
FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
English Contents PRECAUTIONS .........................................4 NOTICE......................................................................... 6 Information .................................................................... 6 Package Contents....................................8 Disk Contents ................................................................8 Manuals.....................................................9 Conventions in this manual ...........................................
PRECAUTIONS PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: Do not open • This device contains no user-serviceable parts.
PA-en-6 2/2 PRECAUTIONS CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the device or other property. These precautions include, but are not limited to, the following: Location • Do not place the device in an unstable position where it might accidentally fall over and cause injuries. • Do not place the device in a location where it may come into contact with corrosive gases or salt air. Doing so may result in malfunction.
PRECAUTIONS NOTICE Information To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices below. ■ About copyrights ■ Handling and maintenance • Do not use the device in the vicinity of a TV, radio, home audio/video equipment , mobile phone, or other electric devices. Otherwise, the device, TV, or radio may generate noise.
PRECAUTIONS The model number, serial number, power requirements, etc., may be found on or near the name plate, which is at the bottom of the unit. You should note this serial number in the space provided below and retain this manual as a permanent record of your purchase to aid identification in the event of theft. Model No. Serial No.
Package Contents Package Contents The package of this product contains the following items. After opening the package, make sure that it includes everything listed below. • • • • UR22mkII Main unit TOOLS for UR22mkII CD-ROM Getting Started (this book) CUBASE AI DOWNLOAD INFORMATION (printed) • USB cable Disk Contents The TOOLS for UR22mkII CD-ROM contains the following. Yamaha Steinberg USB Driver This software allows communication between the device and a computer.
Manuals Manuals Getting Started (this book) Read this manual when setting up the device. After finishing the setup as indicated in this manual, read the Operation Manual. Operation Manual This is included in the TOOLS for UR22mkII CD-ROM. Read through this manual to understand how to use the features of the product. Screens This manual predominantly uses screenshots of Windows. However, Mac screenshots are used when instructions of the function apply only to the Mac.
Panel Controls and Terminals Panel Controls and Terminals Front Panel 1 [INPUT 1 GAIN] knob 2 [MIC/LINE 1/2] jacks 3 [PEAK] indicator 4 [+48V] indicator 5 [USB] indicator 6 [INPUT 2 GAIN] knob 7 [INPUT 2 HI-Z] switch 8 [MIX] knob 9 [PHONES] knob ) [PHONES ] jack ! [OUTPUT] knob 10 UR22mkII Getting Started
Panel Controls and Terminals Rear Panel 1 [5V DC] port 2 [POWER SOURCE] switch 3 [USB2.
Power supply Power supply The UR22mkII is a bus-powered type device which can be powered by the host computer connected via a USB cable. The power automatically turns on when the device is connected to the computer via a USB cable and turns off when the device is disconnected from the computer. WARNING When turning on the AC power in your audio system, always turn on the power amplifier LAST. When turning the power off, the power amplifier should be turned off FIRST.
Setting Up Setting Up 4. Open the CD-ROM then doubleclick [setup.exe]. The following two setup procedures are required before you can use the device with a computer. 5. Follow the on-screen instructions to install the software. 6. When installation has been completed, click [Finish]. 1. 2. Installing Yamaha Steinberg USB Driver If a window requiring you to restart your computer appears, follow the onscreen instructions and restart the computer.
Setting Up 6. 7. When installation has been completed, click [Restart] to restart the computer. Connect the device directly to the computer by using the included USB cable. Make sure not to connect it to a USB hub. 8. Confirm that the [USB] indicator of the device is lit. NOTE If the computer or iPad does not recognize the device, the [USB] indicator flashes continuously. Installation of the Yamaha Steinberg USB Driver is now complete. 2.
Appendix Appendix Mac 1. Disconnect all USB devices other than the mouse and keyboard from the computer. 2. Start the computer and log in to the Administrator account. Uninstalling Yamaha Steinberg USB Driver Windows 1. 2. Disconnect all USB devices other than the mouse and keyboard from the computer. Start the computer and log on to the Administrator account. Exit any open applications and close all open windows. 3. Exit any open applications and close all open windows. 3.
Technical Specifications Technical Specifications MIC INPUT 1/2 (Balanced) Frequency Response +0.1/-0.3 dB, 20 Hz – 22 kHz Dynamic Range 101 dB, A-Weighted THD+N 0.0035 %, 1 kHz, -1 dBFS, 22 Hz/22 kHz BPF Maximum Input Level +4 dBu Input Impedance 4 kΩ Gain Range +6 dB – +60 dB LINE INPUT 1/2 (Balanced) Maximum Input Level +24 dBu Input Impedance 20 kΩ Gain Range -14 dB – +40 dB HI-Z INPUT 2 (Unbalanced) Maximum Input Level +8.5 dBV Input Impedance 1 MΩ Gain Range -0.7 dB – +53.
General Specifications General Specifications Power Requirements 2.5 W Dimensions 159 (W) × 46 (H) × 159 (D) mm Net weight 1030 g Operating Free-air Temperature Range 0 – 40 ℃ Included Accessories ・ TOOLS for UR22mkII CD-ROM ・ Getting Started (brochure) ・ CUBASE AI DOWNLOAD INFORMATION (printed) ・ USB Cable The contents of this manual apply to the latest specifications as of the printing date.
Steinberg Website http://www.steinberg.