User Manual

Tools You Will Need:

YAMAHA TOUGH-TERRAIN FRAME

ASSEMBLY INSTRUCTIONS FOR T-335, T-2700, T-2400

• Phillips (+) screwdriver • Plyers • Hex/allen wrench (included) •

⁄32" Hex/allen wrench (included)

1 Carefully unpack

• Unpack the box and make sure you have all of the parts

Do not throw away the box until you have

completed the assembly of the frame and

the instrument.

(vibe only)

4a Vibe Pedal

• Remove pedal assembly from round tube

3 Upper wheel/frame assembly

• Attach the upper wheel/frame assembly

– Part A to the ends of the wheel assembly

– Part D, secure the allen bolts at the bottom of part A.

– Include part E for vibraphone frame.

4b Vibe Pedal

• Attach vibe pedal assembly to square lower crossbar

of Tough Terrain Frame

™

2a Lower frame assembly 2b Lower frame assembly

• Attach the lower frame assembly

– Slide part B on to the vertical posts of part D (wheel assembly)

– Tighten the allen bolts on part B to secure the low end frame assembly to the vibe wheel assembly.

Vibraphone Only

– Slide part E on to the post of part D – tighten allen bolt on part E

Vibraphone Only

PAGE 1
™ YAMAHA TOUGH-TERRAIN FRAME ASSEMBLY INSTRUCTIONS FOR T-335, T-2700, T-2400 Tools You Will Need: • Phillips (+) screwdriver 1 Carefully unpack • Plyers • Hex/allen wrench (included) 2a Lower frame assembly • 5⁄32" Hex/allen wrench (included) 2b Lower frame assembly F A B B B C D D D (vibe only) E E • Unpack the box and make sure you have all of the parts • Attach the lower frame assembly Do not throw away the box until you have completed the assembly of the frame and the instrument.
PAGE 2
YAMAHA TOUGH-TERRAIN™FRAME - ASSEMBLY INSTRUCTIONS PAGE 2 Marimba Only 5 Accessory bar 6 Secure the accessory bar 7 Remove Tubes A short C B long F • Attach the Accessory bar – Slide part C to the front of the upper and lower frame assembly. (parts A and B) 8 Attach wood end pieces • Attach the Knob (part F) to secure the accessory bar to the frame. Ensure the longer end is inserted in to the lower end the shorter end is inserted into the higher end of the frame.