FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
PA_en_12 1/2 PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING Please keep this manual in a safe place for future reference. Water warning • Do not expose the product to rain, use it near water or in damp or wet conditions, or place on it any containers (such as vases, bottles or glasses) containing liquids which might spill into any openings. • Never insert or remove an electric plug with wet hands.
PA_en_12 2/2 Inadequate ventilation can result in overheating, possibly causing damage to the product(s), or even fire. Make sure that there is adequate space around the product: at least 30 cm above, 30 cm at the sides and 30 cm behind. • Do not carry or transport the device unless it is disassembled. Otherwise, you might be injured if the speaker or spacers strike your head or body. NOTICE • Do not place the product in a location where it may come into contact with corrosive gases or salt air.
Table of Contents PRECAUTIONS .......................................3 Playing Bluetooth® Audio................... 14 NOTICE ....................................................4 Registering (pairing) a Bluetooth® device ................................................. 14 Connecting a Bluetooth® device......... 14 Information..............................................4 Introduction.............................................6 Playing audio files stored in a Bluetooth® device ......................
Introduction Introduction Thank you for purchasing the Yamaha STAGEPAS 1K mkII portable PA System! The STAGEPAS 1K mkII is an all-inone portable PA system that is designed for use at musical or other live events. This owner’s manual is intended for sound crew at live performances or other events. It explains the steps required to set up the STAGEPAS 1K mkII throughout installation and connection of the PA system. It also explains how to operate the STAGEPAS 1K mkII for sound amplification.
Controls and Functions Controls and Functions Top panel Mixer section Line array speaker socket Handle 0 A B 1 2 C 3 E 4 F D 5 G 6 7 Mixer section 1 [PROTECT] LED Lights red when the protection circuit is activated. The protection circuit will be activated in the following cases, and the speaker output will be muted. • Amplifier overheat is detected • A current surge is detected • The power to the unit is turned on: The protection circuit will be activated for a few seconds to avoid noise.
Controls and Functions 8 [Hi-Z] switches (channel 2-3) This switch is used when connecting a device directly to the mixer without a DI (direct box)—for example, instruments with passive pickups, such as an acoustic-electric guitar or electric bass without a battery. This function is effective only for the phone jack input. 9 (Bluetooth) switch/LED This switch turns the Bluetooth audio connection on or off. It is also used to pair (register) a Bluetooth device (page 14).
Controls and Functions Rear panel H L I M J K N N O H [MIC/LINE] input jacks (channel 1-3) Connect microphones, guitars, electronic musical instruments or audio equipment. These are combo jacks that support both XLR and phone plugs. Channels 2 and 3 support Hi-Z. XLR Phone P I [LINK] input jack This jack supports an XLR-type plug.
Controls and Functions J [REVERB FOOT SW] jack This connects to an unlatched-type footswitch, such as the Yamaha FC5. This can be useful for solo performers, since you can toggle the reverb on and off as needed with your foot. K [ST] input jacks These jacks support phone-type plugs. Connect line-level devices such as electronic musical instruments, acoustic-electric guitars, CD players, and portable audio players. For monaural input, connect a cable to the L/MONO jack.
Quick Start Guide Quick Start Guide Attaching the line array speaker and spacers Use the included spacers to install the line array speaker at approximately the same height as the ears of the audience. The line array speaker features a grille. Connecting microphones, musical instruments, or audio devices to the mixer section Before making connections, lower the volume level to the minimum by rotating the [LEVEL] controls counterclockwise.
Quick Start Guide 4. Insert the other end of the power cord into a power outlet. 8. Turn on the power to the connected musical instrument or audio device, then to this unit. The [POWER] LED lights up. Warning • The STAGEPAS 1K mkII has been designed for grounded use. To avoid electrical shock and damage to connected devices, be sure to ground the unit using the included power cord. If you have any questions regarding proper connections, please contact your nearest Yamaha dealer.
Using this Product along with a DXL1K Powered Speaker Using this Product along with a DXL1K Powered Speaker Playing audio in stereo Expanding the number of input channels You can play audio in stereo by adding another STAGEPAS 1K mkII unit or a DXL1K powered speaker. You can double the number of input channels by connecting two STAGEPAS 1K mkII units to each other. Each STAGEPAS 1K mkII unit will operate as a monaural channel. 1.
Playing Bluetooth® Audio Playing Bluetooth® Audio You can set up the STAGEPAS 1K mkII so it will play audio files stored in Bluetooth devices, such as a mobile device. Connecting a Bluetooth® device Using the STAGEPAS 1K mkII for pairing Registering (pairing) a Bluetooth® device Before you can connect a Bluetooth device for the first time, you need to “pair” the device. “Pairing” refers to registering one Bluetooth device with another Bluetooth device.
Controlling the Unit from STAGEPAS Controller Controlling the Unit from STAGEPAS Controller You can control the parameters and view the meters and clipping information of this product from your Bluetoothenabled device, such as a smartphone or tablet. Disconnecting STAGEPAS Controller 1. Display the DEVICE LIST screen on STAGEPAS Controller. For more information on how to use STAGEPAS Controller, please refer to the “STAGEPAS Controller User Guide.” The name of the target STAGEPAS will be highlighted.
Initializing the STAGEPAS 1K mkII Initializing the STAGEPAS 1K mkII If you want to reset the parameters that were programmed from STAGEPAS Controller, or reset the Bluetooth pairing (registering) information to the factory default settings, follow the steps below: Storing the Unit 1. Install the included, dedicated cover over the STAGEPAS 1K mkII. 1. Turn the power switch off. 2.
Troubleshooting Troubleshooting Power does not turn on. Did you firmly and securely connect the power cord? Power shuts down suddenly. Are the vents of the unit blocked? Since inadequate ventilation can result in overheating the mixer, the power may be turned off automatically to protect the system from overheating. Arrange the ventilation for better cooling, then turn on the power again. No sound is heard.
General Specifications General Specifications Main specifications System Type Powered subwoofer with a line array speaker Frequency Response (–10 dB) 37 Hz - 20 kHz Coverage Angle (Horizontal x Vertical) 170° × 30° Crossover Frequency 240 Hz Maximum Output Level (Measured peak, IEC noise@1 m) 125 dB SPL Power Requirements 110-120 V 60 Hz, 220-240 V 50/60 Hz Power Consumption 25 W (idle), 91 W (1/8 power) Dimensions (W × H × D) System (maximum) 334 × 2,000 × 418 mm Weight 23.
General Specifications Input Characteristics Input Level*1 Input Terminals Connector Type XLR CH IN1 XLR Combo Phone XLR CH IN2-3 XLR Combo Hi-Z SW MIC/LINE SW – MIC – LINE – MIC – LINE – MIC – LINE MIC OFF LINE Phone MIC ON LINE Source Impedance 3 kΩ (Balance) 150 Ω Mics/Lines 10 kΩ (Balance) 150 Ω Mics/Lines 3 kΩ (Balance) 150 Ω Mics/Lines 10 kΩ (Balance) 150 Ω Mics/Lines 1 MΩ (Unbalance) 10 kΩ Lines Sensitivity*2 Max.
General Specifications Dimensions Subwoofer 280 418 1,051 550 1,526 2,000 334 Line array speaker 67 86 555 86 582 67 Spacer Unit: mm 20 STAGEPAS 1K mkII Owner’s Manual
ST BA BA Rch PHONE (Unbalance) REVERB FOOT SW Hi-Z HiZ Hi-Z HiZ Lch BLUETOOTH Bluetooth AUDIO (ST) MINI (Unbalance) LINE PHONE (Unbalance) R PHONE (Unbalance) L/MONO COMBO (Balance) CH3 (MIC/LINE/Hi-Z) COMBO (Balance) CH2 (MIC/LINE/Hi-Z) COMBO (Balance) CH1 (MIC/LINE) XLR (Balance) LINK (LINE) INPUT LEVEL CLIP LEVEL BA BA LEVEL MIC/LINE HA CLIP MIC/LINE HA LEVEL CLIP MIC/LINE HA Dif AD AD AD AD AD AD METER METER METER METER LEVEL LEVEL LEVEL LEVEL ON
MEMO 22 STAGEPAS 1K mkII Owner’s Manual
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.
EN SIMPLIFIED EU DECLARATION OF CONFORMITY / SIMPLIFIED UK DECLARATION OF CONFORMITY Hereby, Yamaha Music Europe GmbH declares that the radio equipment type STAGEPAS 1K mkII is in compliance with Directive 2014/53/EU and the radio equipment regulations of UK. The full texts of the EU declaration of conformity and the UK declaration of conformity are available at the following internet address: https://europe.yamaha.com/en/support/compliance/doc.
LV VIENKĀRŠOTA ES ATBILSTĪBAS DEKLARĀCIJA Ar šo Yamaha Music Europe GmbH deklarē, ka radioiekārta STAGEPAS 1K mkII atbilst Direktīvai 2014/53/ES. Pilns ES atbilstības deklarācijas teksts ir pieejams šādā interneta vietnē: https://europe.yamaha.com/en/support/compliance/doc.html LT SUPAPRASTINTA ES ATITIKTIES DEKLARACIJA Aš, Yamaha Music Europe GmbH, patvirtinu, kad radijo įrenginių tipas STAGEPAS 1K mkII atitinka Direktyvą 2014/53/ES.
Informations concernant la collecte et le traitement des déchets d’équipements électriques et électroniques Le symbole sur les produits, l'emballage et/ou les documents joints signifie que les produits électriques ou électroniques usagés ne doivent pas être mélangés avec les déchets domestiques habituels.
Important Notice: Guarantee Information for customers in European Economic Area (EEA) and Switzerland English Important Notice: Guarantee Information for customers in EEA* and Switzerland For detailed guarantee information about this Yamaha product, and Pan-EEA* and Switzerland warranty service, please either visit the website address below (Printable file is available at our website) or contact the Yamaha representative office for your country.
ADDRESS LIST NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Toronto, Ontario, M1S 3R1, Canada Tel: +1-416-298-1311 U.S.A. Yamaha Corporation of America 6600 Orangethorpe Avenue, Buena Park, CA 90620, U.S.A. Tel: +1-714-522-9011 CENTRAL & SOUTH AMERICA MEXICO Yamaha de México, S.A. de C.V. Av. Insurgentes Sur 1647 Piso 9, Col. San José Insurgentes, Delegación Benito Juárez, CDMX, C.P. 03900, México Tel: +52-55-5804-0600 BRAZIL Yamaha Musical do Brasil Ltda.