manual

ManualsBrandsYamaha ManualsComputer equipmentSound Editor ver. 2.10

DM2000 V2.2 Supplementary Manual

The DM2000 System Software Version 2.20 features the following changes and additions (including the changes made

up to Version 2.11).

Changes and additions in Version 2.20

❏

More Add-On Effects Packages available (pages 176 and 179)

The following Add-On Effects Packages are now available:

•

AE041

Surround Post Package

•

AE051

Vintage Stomp Package

Due to this addition, effect memories #53 through 67 in the Effects library are now designated as preset effects pro-

grams. These preset programs are dedicated to Add-On Effects. The numbers of effects programs that do not have

Add-On Effects installed are grayed out and cannot be used. The following effects programs in the Effects library

have been dedicated to the new Add-On Effects Packages.

Please refer to the following Yamaha website for the latest information on the Add-On Effects Packages:

http://www.yamahaproaudio.com

❏

Additional trigger sources in the GPI OUTPUT section (pages 266 and 305)

The following parameters have been added as the trigger signal source in the GPI OUTPUT section.

xxx ON TALLY:

The trigger signal is active only while the corresponding channel is turned ON.

The following parameters have been added in the OUTPUT list of the “GPI Trigger Source & Target List” on

page

305.

❏

About the DM2000 Editor version

If you use the DM2000 Editor (Studio Manager) to control the DM2000, update the DM2000 Editor to version

2.1.2 or higher (Studio Manager version 2.1 or higher).

If your Studio Manager CD-ROM version is not X5401

, download the latest version from the following Yamaha

website:

http://www.yamahaproaudio.com

No. Preset name Type

62 Room ER ROOM ER

63 Auto Doppler AUTO DOPPLER

64 Field Rotation FLD ROTATION

65 Max100 MAX100

66 Vintage Phaser VNTG PHASER

67 Dual Phaser DUAL PHASER

# Source

398 CH1 ON TALLY

493 CH96 ON TALLY

494 BUS1 ON TALLY

501 BUS8 ON TALLY

502 AUX1 ON TALLY

513 AUX12 ON TALLY

514 MTX1 ON TALLY

517 MTX4 ON TALLY

518 ST ON TALLY

DM2000 V2

.2_E.fm Page 1 Monday,

June 7, 2010 10:31 AM

Summary of content (8 pages)

PAGE 1
DM2000 V2.2_E.fm Page 1 Monday, June 7, 2010 10:31 AM DM2000 V2.2 Supplementary Manual The DM2000 System Software Version 2.20 features the following changes and additions (including the changes made up to Version 2.11). Changes and additions in Version 2.
PAGE 2
DM2000 V2.2_E.fm Page 2 Monday, June 7, 2010 10:31 AM Changes in V2.11 ❏ Y96K card and MY16-mLAN card support (pages 70 and 349) The Waves Y96K Plug-in DSP card (supported by Version 2.10) and the MY16-mLAN interface card are now supported. Also, in accordance with the mLAN MIDI specifications, multiple MIDI ports on SLOT 1 have been changed to a single port. (Now you do not need to select Ports 1-8.
PAGE 3
DM2000 V2.2_E.fm Page 3 Monday, June 7, 2010 10:31 AM ❏ THX presets added to Surround Monitor (page 161-163) Presets for the THX pm3 monitor system have been added to the bass management settings for surround monitoring. Several supplements have also been added regarding the surround monitor settings, so please replace the corresponding pages with the following.
PAGE 4
DM2000 V2.2_E.fm Page 4 Monday, June 7, 2010 10:31 AM The following screen shows an example in 6.1 Surround mode and 3-1 Monitor Matrix mode. • BASS MANAGEMENT You can set the filter and attenuator settings for each Surround Monitor Channel using eight preset Bass Management modes. The following presets are available: No.
PAGE 5
DM2000 V2.2_E.fm Page 5 Monday, June 7, 2010 10:31 AM About the Presets (1) DVD LFE80Hz This is a preset optimized for DVD-Video production. The LFE playback bandwidth is set up to 80 Hz. When using this preset, we recommend that you use an external device to apply an LPF (fc=80 Hz, –24 dB/oct) to the LFE master source. To monitor audio on DVD-Audio or SACD discs, change the LFE level (AMP) and LPF (LPF1) to 0 dB and THRU, respectively, if necessary.
PAGE 6
DM2000 V2.2_E.fm Page 6 Monday, June 7, 2010 10:31 AM • MONITOR ALIGNMENT ATT & DLY ON/OFF These buttons are used to turn on and off the Monitor Alignment Attenuator and Delay parameters of all Surround speakers. The MONITOR ALIGNMENT diagram and Surround Channel Attenuator and Delay parameters, which are displayed when either of these buttons are selected, allow you to align the surround monitor speakers by attenuating and delaying Surround Channels as necessary.
PAGE 7
DM2000 V2.2_E.
PAGE 8
DM2000 V2.2_E.fm Page 8 Monday, June 7, 2010 10:31 AM U.R.G.