V3 Supplemental Manual EN
CONTENTS New functions added to the USER DEFINED keys, USER DEFINED knobs, and [Fn] keys.................................................................................................. 28 Contents New messages ............................................................................................... 30 PORT NAME .....................................................................................................3 Improved CH COPY operation..........................................................
CONTENTS PORT NAME 1 NAMES You can select CHANNEL NAME, PORT NAME, or PORT ADDRESS (e.g., M1:RY1-1) as a label. PORT NAME You can now label the devices, slots and ports that are connected to the network, and view these labels in the patch screen and other screens.
CONTENTS PORT NAME ■ Setting screen 7 Keyboard button Press this button repeatedly to toggle between the direct input and the input from the NAME EDIT popup window. PORT NAME tag on the SYSTEM CONFIG screen 8 DEVICE SYNC/DANTE SETUP popup button Press this button to access the DEVICE SYNC popup window in which you can sync port name or other labels. 3 1 NOTICE 5 To apply the labeled names, you must synchronize the data from the control surface to the connected device.
CONTENTS PORT NAME USER DEFINED KEYS popup window Function PARAMETER 1 TOGGLE PARAMETER 2 — Three-way toggle from channel name (the key indicator is off) to port name (lit) to address (lit). LATCH Pressing the key repeatedly will toggle between channel name and port name. The key is lit while the port name is displayed. UNLATCH While pressing and holding down the key, the port name is displayed. When releasing the key, the channel name is displayed.
CONTENTS Improved CH COPY operation CH COPY popup window (output channel) Improved CH COPY operation You can now select specific parameters to copy. You can register each of eight patterns for inputs and outputs respectively as a preset. The mounting and patching settings as well as the parameters will be copied automatically. 1 CH COPY popup window (input channel) 2 1 2 1 Preset buttons Press one of these buttons to select the corresponding preset group of parameters to copy.
CONTENTS Improved CH COPY operation 1 NAME EDIT button Press this button to access the NAME EDIT popup window in which you can edit the preset name. INPUT CH COPY PRESET popup window 1 2 2 Parameter buttons Turn on these buttons to register a group of parameters as a preset. 3 WITH PLUGINS button Turn on this button to include in the copy source the plug-ins that have been inserted into the selected channel, and the patches and parameters.
CONTENTS Improved CH COPY operation If you turn on the WITH PLUGINS button to include the plug-ins in the copy source, and if the pair setting of the copy-source channel(s) differs from that of the copy-destination channel(s), the following operation will occur. Parameters to copy Parameter Description NAME Channel name, color, icon ANALOG GAIN Gain, phantom power on/off, GANG, gain compensation, M/S decode SILK SILK settings PHASE Ø 31BandGEQ Copy the source and patch.
CONTENTS Improved CH COPY operation NOTE During the copy operation, if any controls made from PM Editor interrupt a mounting or patching process, or if the available resources are insufficient, an alert screen will appear. The copy source is a stereo channel pair and the copy destination is a mono channel: Copy source Copy destination 31BandGEQ Copy 31BandGEQ on the L channel of the source and patch (On, Band/ Gain, Limit). Flex15GEQ Copy the A side of the source and patch.
CONTENTS More metering points available PRE GC will be enabled if a device patched to the input features gain compensation. If the device does not feature gain compensation, selecting PRE GC will be ignored and PRE D.GAIN will be automatically selected. More metering points available More metering points are now available to help better detect levels.
CONTENTS DaNSe 1 LOW FREQUENCY knob Adjusts the lowest frequency value of the noise band that you wish to suppress. You cannot set a value higher than one quarter of the HIGH FREQUENCY knob setting. Since this setting is used during analysis by the LEARN function, you must adjust this value before using the LEARN function. ; DaNSe DaNSe is a powerful, intuitive Dynamic Noise Suppressor designed by the legendary Dr. K’s Labs to feature exceptional sound quality.
CONTENTS MIX TO INPUT MIX TO INPUT SUB IN You can now route MIX/MATRIX bus signals back to the input channels. For example, you can route the signals from an orchestral string section and brass section all together to a bus, and then send the bus signal back to an effect rack or monitor. A new SUB IN function enables you to patch input ports directly to the output channels. In this way, you can connect bus out signals from another console via a cascade connection to expand the number of inputs.
CONTENTS Improved channel name indicators SUB IN ATT popup window Improved channel name indicators Channel names are now displayed in the patch screens, meter screens and other screens. This improvement will make it easier to identify the channel you are working on, and will make for more efficient controls and operations. INPUT PATCH [PLUG-IN] screen Press one of the tabs to select the output channel type, and then use the knobs to adjust the gain for each channel.
CONTENTS Improved channel name indicators Meter screen PLUGIN screen USB RECORDER screen BUS SETUP screen Touch the label indicator beneath each fader to switch to the channel name indicator.
CONTENTS Improved scene operations ■ Button indicators Improved scene operations The button indicators change according to the parameter status. Operability and display functions in various scene setting screens have been improved. ON ■ Focus, Global Paste, and Recall Safe-related improvements OFF Additional options have been added to the lists (EQ, DYN1/2, and D.OUT) to set up a scene’s Focus, Recall Safe, and Global Paste functions.
CONTENTS Improved scene operations ■ Improving the SCENE LIST screen ■ Improved Global Paste-related operation Improvement to the GLOBAL PASTE screen now enables you to select parameters more easily and recall libraries and presets. GLOBAL PASTE screen 1 2 5 1 3 2 1 LINK TO SURFACE button Turn on this button to scroll a scene list without affecting the scene number display on the menu bar and operation panel.
CONTENTS Improved DCA operations ■ PRESET Assign mode Improved DCA operations You can use presets to configure channel assignment, DCA name, color and icon settings. The presets also enable you to store or recall DCA libraries as easily as other libraries. The functions of the CH ON FOLLOWS DCA ASSIGN button and SET BY SEL button are also enabled. DCA assignment in Theatre mode is now much easier. You can use presets to configure channel assignment, name, icon and color settings.
CONTENTS Improved setting operations in the CUSTOM FADER BANK popup window 5 BANK CLEAR button Clears the assignment for the selected bank. Pressing this button will open a confirmation dialog box. Press OK to clear the assignment. Otherwise, press CANCEL to return to the previous screen without changing the setting. Improved setting operations in the CUSTOM FADER BANK popup window 6 BANK COPY button Press this button to copy the settings of the selected bank.
CONTENTS Improved sync operations When you press the SYNC button for data sync process, a confirmation dialog box appears. Press the OK button to execute the operation. Improved sync operations The operation for specifying the data sync direction (on the DEVICE SYNC screen for sync process) has been improved. The initial value for the sync direction has been eliminated for the purpose of data safety. Also, you can now set multiple data sync directions simultaneously.
CONTENTS Warning against loading a conflicting system configuration Warning against loading a conflicting system configuration Increased loadable items If you load ALL types of data, pressing the WITH SYSTEM SETTINGS button will also load the following items: A warning button now appears if you try to load data that conflicts with the current system configuration.
CONTENTS Improved EQ functions Improved EQ functions Additional options for the parameter set and copy function An attenuator has been added to each EQ bank. You can use the attenuators to correct level differences due to different EQ settings or to adjust the level for each bank individually. The following options have been added to the parameter set function.
CONTENTS Additional options for the parameter set and copy function PARAMETER SET (TO ST) popup window · EQ and Dynamics EQUALIZER/DYNAMICS field on the SELECTED CHANNEL VIEW screen 1 2 3 4 1 Parameter value Enables you to set the parameter value to ON or OFF. While pressing and holding down the [SHIFT] key, press the LINK button to access the PARAMETER SET (BANK LINK) popup window. 2 Destination select knobs Select a range of channel numbers to which to apply the parameter value.
CONTENTS Additional library screen function PARAMETER SET (BANK LINK) popup window Additional library screen function A Sort function has been added to the library screen. 1 ACTOR LIBRARY screen 2 3 4 You can sort the library items by library number or name. 1 Parameter value Enables you to set the parameter value to ON or OFF. 2 Destination select knobs Select a range of channel numbers to which to apply the parameter value. 3 SELECT ALL button Selects all channels as the copy destination.
CONTENTS DSP latency display DSP latency display Improved RTA display Latency values based on the Delay Compensation setting inside the DSP engine are now displayed. A new OFFSET knob and a linear display enable you to identify even a soft audio signal. DELAY COMPENSATION popup window RTA popup window 1 This popup window indicates the values of signal latency (msec) occurring during the route from the DSP engine through inputs to each bus output.
CONTENTS Flashing ON buttons Flashing ON buttons [ON] KEYS FUNCTION DURING SOF In the SELECTED CHANNEL VIEW screen or METER screen, the ON buttons for the channels muted in a mute group will flash. You can now specify the behavior of the [ON] keys during SENDS ON FADER mode. SURFACE SETTING2 screen 1 1 [ON] KEYS FUNCTION DURING SOF • SEND ..............................Use the [ON] key to switch the send on or off. • CHANNEL.....................Use the [ON] key to switch the channel on or off.
CONTENTS A new [SHIFT] key function A new [SHIFT] key function Improved keyboard input When you enter characters (such as a scene title) from the keyboard, you can press the ENTER key instead of the OK button to confirm the entry. You can now select whether the individual [SHIFT] keys on the bays of the control surface affect the corresponding bay independently, or one [SHIFT] key affects all bays. SURFACE SETTING2 screen 1 1 [SHIFT] KEYS Specifies the behavior of the [SHIFT] keys. • INDIVIDUAL .....
CONTENTS Improved RIVAGE PM Editor SCREEN SETTINGS screen Improved RIVAGE PM Editor RIVAGE PM Editor can now simultaneously display multiple screens that correspond to each bay. PM Editor startup screen 1 1 1 [OK] WITH ENTER KEY Turn on this button to enable the ENTER key. 1 NUMBER OF WINDOWS Enables you to select the number of screens to be displayed simultaneously (1–3).
CONTENTS New functions added to the USER DEFINED keys, USER DEFINED knobs, and [Fn] keys The following operations are always applied to the main screen (BAY R). New functions added to the USER DEFINED keys, USER DEFINED knobs, and [Fn] keys • Switching to full screen display (zoom) • Pressing the [ESC] key repeatedly to toggle between the OVERVIEW screen and the SELECTED CHANNEL VIEW screen (The [F2] key is effective on all windows.
CONTENTS New functions added to the USER DEFINED keys, USER DEFINED knobs, and [Fn] keys Function PARAMETER 1 PARAMETER 2 PARAMETER 3 ■ USER DEFINED knobs Description You can now assign the following functions to these keys: BAY ALL SET [+48V] BAY C *1 --- Function PARAMETER 1 BAY ALL SET [PHASE] BAY C *1 --CH FADER BAY ALL SET [INSERT1 ON] BAY C *1 SPECIFIC CH --- BAY ALL SET [INSERT2 ON] BAY C *1 --- PARAMETER 2 PARAMETER 3 CH CH 1–144 MIX MIX 1–72 MATRIX MATRIX 1–36 STEREO
CONTENTS New messages New messages The following messages have been added: Message Description DEVICE NOT SYNCED! There is a device that is not synchronizing with the TWINLANe network. Access the DEVICE SYNC screen and sync the device. CURRENT SCENE UPDATED: SCENE #x.xx This message appears after the unit updates a scene without displaying the confirmation message. Word Clock Sync Error! The word clock for the Dante audio network is not properly configured.
CONTENTS New messages Yamaha Pro Audio global website http://www.yamahaproaudio.com/ Yamaha Downloads https://download.yamaha.
