AV Receiver Owner’s Manual Read the supplied booklet “Safety Brochure” before using the unit.
CONTENTS Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 7 Connecting other devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Connecting an external power amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 FEATURES 6 Connecting recording devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Listening to FM/AM radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 CONFIGURATIONS 90 Setting the frequency steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Selecting a frequency for reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
APPENDIX 120 Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 Power, system and remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accessories Operating range of the remote control Check that the following accessories are supplied with the product. • Point the remote control at the remote control sensor on the unit and remain within the operating range shown below. Remote control Batteries (AAA, R03, UM-4) (x2) (RX-V777) (RX-V677) Within 6 m (20 ft) 30° 30° 30° 30° Insert the batteries the right way round. AM antenna FM antenna *One of the above is supplied depending on the region of purchase.
FEATURES What you can do with the unit Wide variety of supported content • iPod/iPhone/iPad . p.63 • USB . p.66 • Media server (PC/NAS) . p.69 • Internet radio . p.73 • AirPlay . p.76 Supports 2- to 7.1-channel (plus presence) speaker system. Allows you to enjoy your favorite acoustic spaces in various styles. • Automatically optimizing the speaker . p.34 settings to suit your room (YPAO) • Reproducing stereo or multichannel . p.
Full of useful functions! Useful tips ❑ Connecting various devices (p.25) ❑ Creating 3-dimensional sound fields (p.53) A number of HDMI jacks and various input/output jacks on the unit allow you to connect video devices (such as BD/DVD players), audio devices (such as CD players), game consoles, camcorders, and other devices. Connecting presence speakers allows you to create a natural 3-dimensional sound field in your own room (CINEMA DSP 3D).
Part names and functions Front panel (RX-V777) 1 2 3 4 5 6 7 8 9 : AM TUNING A MAIN ZONE B PURE DIRECT ZONE 2 ZONE CONTROL MEMORY INFO (WPS) PRESET FM INPUT VOLUME SCENE BD DVD YPAO MIC PHONES TV TONE CONTROL NET PROGRAM RADIO STRAIGHT SILENT CINEMA C 1 MAIN ZONE z key Turns on/off (standby) the unit. 2 Standby indicator Lights up when the unit is in standby mode under any of the following conditions. • HDMI Contorol is enabled (p.106) • Standby Through is enabled (p.
Front panel (RX-V677) 1 23 MAIN ZONE 4 56 7 8 9 : A B C YPAO MIC PURE DIRECT ZONE 2 ZONE CONTROL INFO (WPS) MEMORY PRESET FM AM TUNING VOLUME SCENE BD DVD PHONES INPUT TV TONE CONTROL NET PROGRAM RADIO STRAIGHT SILENT CINEMA D 1 MAIN ZONE z key Turns on/off (standby) the unit. 2 Standby indicator Lights up when the unit is in standby mode under any of the following conditions. • HDMI Contorol is enabled (p.106) • Standby Through is enabled (p.
Front display (indicators) 1 2 3 4 5 6 7 ENHANCER STEREO TUNED OUT 1 2 89 : A B PARTY SLEEP MUTE ZONE 2 VOL. ADAPTIVE DRC VIRTUAL FPL L C R FPR SL SW SR SBL SB SBR C 1 ECO Lights up when the unit is in the eco mode (p.113). 2 HDMI Lights up when HDMI signals are being input or output. OUT1/OUT2 (RX-V777 only) Indicates the HDMI OUT jacks currently outputting an HDMI signal OUT (RX-V677 only) Lights up when HDMI signals are being output.
Rear panel (RX-V777) 1 2 3 4 6 5 7 9 8 0 A B (U.S.A. model) TRIGGER OUT 12V 0.1A WIRELESS DC OUT 5V 0.5A HDMI 1 HDMI OUT HDMI 2 HDMI 3 HDMI 4 HDMI 5 NETWORK (BD/DVD) (NET) IN 2 1 ARC OUT EXTRA SP ZONE2/F.
Rear panel (RX-V677) 1 2 3 4 5 6 8 7 9 0 A B (U.S.A. model) TRIGGER OUT 12V 0.1A WIRELESS DC OUT 5V 0.5A HDMI OUT HDMI 1 HDMI 2 HDMI 3 HDMI 4 HDMI 5 NETWORK (BD/DVD) (NET) IN ARC OUT EXTRA SP REMOTE OPTICAL ZONE2/F.
Remote control 1 Remote control signal transmitter 1 Transmits infrared signals. 2 z (receiver power) key 2 Turns on/off (standby) the unit. HDMI 1 2 3 5 3 3 Input selection keys 4 V-AUX AV 1 2 3 4 AUDIO 5 6 TUNER 4 5 MAIN USB TV 7 TOP MENU NET MUTE VOLUME ON SCREEN F G RADIO POP-UP/MENU OPTION 9 H I J ENTER DISPLAY BAND MODE TUNING PRESET SUR.
PREPARATIONS General setup procedure 1 Placing speakers (p.15) Select the speaker layout for the number of speakers that you are using and place them in your room. 2 Connecting speakers (p.19) Connect the speakers to the unit. 3 Connecting a TV (p.23) Connect a TV to the unit. 4 Connecting playback devices (p.25) Connect video devices (such as BD/DVD players) and audio devices (such as CD players) to the unit. 5 Connecting the FM/AM antennas (p.29) Connect the supplied FM/AM antennas to the unit.
1 2 3 4 5 6 7 8 9 10 11 1 Placing speakers Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer (with built-in amplifier) in your room. This section describes the representative speaker layout examples. Caution • Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6 MIN”. In this case, you can also use 4-ohm speakers as the front speakers.
1 2 3 4 5 6 7 8 9 10 11 7.1+2-channel system 7.1-channel system (using surround back speakers) E R 1 9 1 2 3 4 5 6 7 This speaker system creates Virtual Presence Speaker (VPS) using the front, center and surround speakers to produce a 3-dimensional sound field, and also allows you to enjoy extended surround sounds using the surround back speakers. 6.1-channel system R 1 4 5 6 7.
1 2 3 4 5 6 7 8 9 10 11 5.1-channel system Front 5.1-channel system (using presence speakers) E 1 9 R 1 2 9 3 4 2 3 5 This speaker system creates Virtual Presence Speaker (VPS) using the front, center and surround speakers to produce a 3-dimensional sound field, and is suited for enjoying 5.1-channel contents.
1 2 3 4 5 6 7 8 9 10 11 ■ Setting the speaker impedance 2.1-channel system Under its default settings, the unit is configured for 8-ohm speakers. When using a 6-ohm speaker for any channel, set the speaker impedance to “6 MIN”. In this case, you can also use 4-ohm speakers as the front speakers. 1 2 9 1 Before connecting speakers, connect the power cable to an AC wall outlet. 2 While holding down STRAIGHT on the front panel, press MAIN ZONE z.
1 2 3 4 5 6 7 8 9 10 11 2 Connecting speakers Connect the speakers placed in your room to the unit. The following diagrams provide connections for 7.1+2-, 7.1-, and 6.1-channel systems as examples. For other systems, connect speakers while referring to the connection diagram for the 6.1-channel system. 7.1+2-channel system 7.1-channel system (using surround back speakers) EXTRA SP ZONE2/F.PRESENCE EXTRA SP ZONE2/F.
1 2 3 4 5 6 7 8 9 10 11 7.1-channel system (using presence speakers) ■ Connecting speaker cables 6.1-channel system EXTRA SP ZONE2/F.PRESENCE EXTRA SP ZONE2/F.PRESENCE The unit (rear) CENTER a Remove approximately 10 mm (3/8”) of insulation from the ends of the speaker cable and twist the bare wires of the cable firmly together. The unit (rear) SPEAKERS FRONT Speaker cables have two wires.
1 2 3 4 5 6 7 8 9 10 11 Push-type speaker terminals (RX-V677 only) a Remove approximately 10 mm (3/8”) of insulation from the ends of the speaker cable, and twist the bare wires of the cable firmly together. b Press down the tab. c Insert the bare wires of the cable into the hole in the terminal. d Release the tab. a Connecting front speakers that support bi-amp connections When using front speakers that support bi-amp connections, connect them to the FRONT jacks and SURROUND BACK/BI-AMP jacks.
Input/output jacks and cables ■ Video/audio jacks ■ Video jacks ■ Audio jacks ❑ HDMI jacks ❑ COMPONENT VIDEO jacks ❑ OPTICAL jacks Transmit digital video and digital sound through a single jack. Use an HDMI cable. Transmit video signals separated into three components: luminance (Y), chrominance blue (PB), and chrominance red (PR). Use a component video cable with three plugs. Transmit digital audio signals. Use a digital optical cable. Remove the tip protector (if available) before using the cable.
1 2 3 4 5 6 7 8 9 10 11 3 Connecting a TV Connect a TV to the unit so that video input to the unit can be output to the TV. You can also enjoy playback of TV audio on the unit. To maximize the performance of the unit, we recommend connecting a TV with an HDMI cable. ■ HDMI connection ■ Component/composite video connection When connecting any video device with a component video cable, connect the TV to the MONITOR OUT (COMPONENT VIDEO) jacks.
1 2 3 4 5 6 7 8 9 10 11 ❑ VIDEO (composite video) connection (with a video pin cable) MONITOR OUT (VIDEO) jack The unit (rear) Video input (composite video) TRIGGER OUT 12V 0.1A DC OUT 5V 0.
1 2 3 4 5 6 7 8 9 10 11 4 Connecting playback devices The unit is equipped with a variety of input jacks including HDMI input jacks to allow you to connect different types of playback devices. For information on how to connect an iPod or a USB storage device, see the following pages. – Connecting an iPod (p.63) ■ Component video connection Connect a video device to the unit with a component video cable and an audio cable (digital optical or digital coaxial).
1 2 3 4 5 6 7 8 9 10 11 ■ Composite video connection ■ Changing the combination of video/audio input jacks Connect a video device to the unit with a video pin cable and an audio cable (digital coaxial, digital optical, or stereo pin cable). Choose a set of input jacks (on the unit) depending on the audio output jacks available on your video device.
1 2 3 4 5 6 7 8 9 10 11 • The following operation is available only when your TV is connected to the unit via HDMI. 1 After connecting external devices (such as a TV and playback devices) and power cable of the unit, turn on the unit. 2 Press AV 2 to select “AV 2” (video input jack to be used) as the input source. 5 6 7 Use the cursor keys to select “Audio In” and press ENTER. 8 Press ON SCREEN. Use the cursor keys to select “AV5” (audio input jack to be used).
1 2 3 4 5 6 7 8 9 10 11 Connecting audio devices (such as CD players) Connecting to the jacks on the front panel Connect audio devices such as CD players, MD players, and a turntable to the unit. Depending on the audio output jacks available on your audio device, choose one of the following connections. Use the VIDEO AUX jack to temporarily connect a playback device to the unit.
1 2 3 4 5 6 7 8 9 10 11 ❑ MHL connection Connect an MHL-compatible mobile device (such as smartphones) to the unit with an MHL cable. You can enjoy full HD videos and multichannel audio sources stored on the mobile device. The VIDEO AUX jack of the unit enables you to input videos and audio directly from the mobile device to the unit. 5 Connecting the FM/AM antennas Connect the supplied FM/AM antennas to the unit. Fix the end of the FM antenna to a wall, and place the AM antenna on a flat surface.
1 2 3 4 5 6 7 8 9 10 11 6 Connecting a network cable or the wireless antenna Connect the unit to a router (access point) with a network cable, or connect the supplied wireless antenna for establishing a wireless network connection. Connecting the wireless antenna You can enjoy Internet radio or music files stored on media servers, such as PCs and Network Attached Storage (NAS), on the unit. Connect the supplied wireless antenna to the unit for establishing a wireless network connection.
1 2 3 4 5 6 7 8 9 10 11 7 Connecting other devices Connecting an external power amplifier 4 SUBWOOFER1–2 jacks For connecting a subwoofer with built-in amplifier. When 2 subwoofers are connected, the same sound is output from them. (RX-V777 only) When connecting an external power amplifier (pre-main amplifier) to enhance speaker output, connect the input jacks of the power amplifier to the PRE OUT jacks of the unit.
1 2 3 4 5 6 7 8 9 10 11 Connecting a device compatible with the trigger function The trigger function can control an external device in conjunction with operating the unit (such as powering on/off and input selection). If you have a Yamaha subwoofer that supports a system connection or a device with a trigger input jack, you can use the trigger function by connecting the external device to the TRIGGER OUT jack.
1 2 3 4 5 6 7 8 9 10 11 z 9 Selecting an on-screen menu language HDMI 1 2 3 4 5 Select the desired on-screen menu language from English (default), Japanese, French, German, Spanish, Russian, Italian and Chinese. V-AUX AV 1 2 3 4 AUDIO 5 6 1 TUNER USB NET MAIN PARTY ZONE 2 2 HDMI OUT SCENE BD DVD TV NET PROGRAM MUTE TOP MENU RADIO VOLUME POP-UP/MENU ON SCREEN ON SCREEN 1 2 Press z (receiver power) to turn on the unit. 3 4 Press ON SCREEN.
1 2 3 4 5 6 7 8 9 10 11 z 10 Optimizing the speaker settings automatically (YPAO) HDMI 1 2 3 4 5 V-AUX AV 1 2 3 4 AUDIO 5 6 1 TUNER USB NET MAIN PARTY ZONE 2 2 The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room.
1 2 3 4 5 6 7 8 9 10 11 (RX-V677) 2 5 The following screen appears on the TV. HDMI 1 3 4 5 (RX-V777 only) If desired, change the measuring method (multi/single). a Use the cursor keys to select “Multi Position” and press ENTER. V-AUX AV 1 2 3 5 6 1 b Use the cursor keys to select a setting and then press ENTER. 4 AUDIO TUNER MAIN USB 2 NET PARTY ZONE 2 HDMI OUT SCENE BD DVD TV NET PROGRAM MUTE TOP MENU RADIO This completes the preparations.
1 2 3 4 5 6 7 8 9 10 11 Single measure Multi measure (5 listening positions) HDMI 1 2 3 4 5 Follow the procedure below for measurement. It takes about 3 minutes to perform the measurement. V-AUX AV 1 2 3 Measuring at one listening position (single measure) 4 AUDIO 5 6 1 TUNER USB NET MAIN PARTY ZONE 2 2 1 HDMI OUT a SCENE BD DVD TV NET PROGRAM MUTE d e To start the measurement, use the cursor keys to select “Measure” and press ENTER.
1 2 3 4 5 6 7 8 9 10 11 3 HDMI 1 2 3 4 5 To save the measurement results, use the cursor keys (e/r) to select “SAVE” and press ENTER. When “Multi Position” is set to “Yes”, follow the procedure below for measurement. It takes about 10 minutes to measure 8 listening positions. V-AUX AV 1 2 3 4 AUDIO 5 6 1 TUNER USB NET MAIN PARTY ZONE 2 2 HDMI OUT • If any error message (such as E-1) or warning message (such as W-1) appears, see “Error messages” (p.40) or “Warning messages” (p.41).
1 2 3 4 5 6 7 8 9 10 11 3 HDMI 1 2 3 4 5 V-AUX AV 1 2 3 5 6 1 TUNER USB 6 Use the cursor keys (e/r) to select “YES” or “NO” to enable/disable YPAO Volume and press ENTER. When you have taken measurements at 8 listening positions, the following screen appears automatically. 4 AUDIO MAIN When the measurements at the positions you want to measure are completed, use the cursor keys to select “CANCEL” and press ENTER.
1 2 3 4 5 6 7 8 9 10 11 Checking the measurement results 3 HDMI 1 2 3 You can check the YPAO measurement results. 4 5 1 V-AUX AV 1 2 3 4 AUDIO 5 6 TUNER MAIN 1 USB Reloading the previous YPAO adjustments • You can also select “Result” from “Auto Setup” (p.98) in the “Setup” menu, which displays the previous measurement results.
1 2 3 4 5 6 7 8 9 10 11 Error messages If any error message is displayed during the measurement, resolve the problem and perform YPAO again. Error message Cause E-1: No Front SP Front speakers are not detected. E-2: No Sur. SP One of the surround speakers cannot be detected. E-3: No F.PRNS SP One of the presence speakers cannot be detected. E-4: SBR → SBL A surround back speaker is connected to the R side only.
1 2 3 4 5 6 7 8 9 10 11 Warning messages If a warning message is displayed after the measurement, you can still save the measurement results by following on-screen instructions. However, we recommend you perform YPAO again in order to use the unit with the optimal speaker settings. Warning message Cause Remedy W-1: Out of Phase A speaker cable may be connected with the reverse polarity (+/-). Select “Wiring” in “Result” (p.
1 2 3 4 5 6 7 8 9 10 11 11 Connecting to a network device wirelessly Connect the unit to a wireless router (access point) or a mobile device by establishing a wireless connection. ■ Connecting without a wireless router (access point) Connect a mobile device to the unit directly. You can use the application for smartphone / tablet “AV CONTROLLER” to control the unit from mobiles devices or enjoy music files stored on mobiles devices on the unit.
1 2 3 4 5 6 7 8 9 10 11 z Connecting the unit to a wireless network HDMI 1 2 3 There are several methods to connect the unit to a wireless network. 4 5 V-AUX AV 1 2 3 Select a connection method according to your environment. 4 AUDIO 5 6 1 TUNER USB NET MAIN PARTY ZONE 2 2 Do you own iOS devices (iPhone/iPad/iPod touch)? HDMI OUT Yes A (p.
1 2 3 4 5 6 7 8 9 10 11 z HDMI 1 2 3 4 5 V-AUX 1 2 3 6 1 Connect the iOS device to the USB jack, and disable the screen lock on the iOS device. The unit (front) AV 5 9 ■ B: Using the WPS push button configuration You can easily set up a wireless connection with one push of the WPS button. 4 AUDIO TUNER MAIN USB VIDEO AUX 2 NET PARTY ZONE 2 HDMI/ MHL 5V 1A VIDEO 5V 2.1A 2.
1 2 3 4 5 6 7 8 9 10 11 z HDMI 1 2 3 4 5 V-AUX AV 1 2 3 5 6 1 TUNER USB NET PARTY ZONE 2 If your wireless router (access point) does not support WPS push button configuration method, follow the procedure below to configure the wireless network settings. 1 2 2 HDMI OUT SCENE BD DVD TV NET PROGRAM MUTE TOP MENU Use the cursor keys (q/w) and ENTER to select the desired connection method and select “NEXT”.
1 2 3 4 5 6 7 8 9 10 11 HDMI 1 2 3 4 5 V-AUX ❑ Searching for an access point ❑ Setting up the wireless connection manually If you select “Access Point Scan” as the connection method, the unit starts searching for access points. After a while, the list of available access points appears on the TV screen. If you select “Manual Setting” as the connection method, the wireless connection setting screen appears on the TV.
1 2 3 4 5 6 7 8 9 10 11 3 HDMI 1 2 3 4 5 If you select “None” in Step 2, this setting is not available. Proceed to Step 4. V-AUX AV 1 2 3 5 6 1 Use the cursor keys and ENTER to enter the security key and select “NEXT”. 4 AUDIO TUNER MAIN USB HDMI OUT If you select other method, enter either 8 to 63 character string, or 64 hexadecimal digits.
1 2 3 4 5 6 7 8 9 10 11 z HDMI 1 2 3 4 5 2 3 7 Use the cursor keys (q/w) and ENTER to check “Wireless Direct” and select “OK”. Follow the procedure below to connect a mobile device to the unit directly. V-AUX AV 1 Connecting a mobile device to the unit directly (Wireless Direct) 4 AUDIO 5 6 1 TUNER USB NET MAIN PARTY ZONE 2 2 • Wireless Direct connection may be insecure since the communication is not strongly encrypted.
1 2 3 4 5 6 7 8 9 10 11 9 HDMI 1 2 3 4 5 If you select “None” in Step 8, this setting is not available. Proceed to Step 10. V-AUX AV 1 2 3 5 6 1 TUNER USB NET Use the cursor keys and ENTER to enter the security key and select “NEXT”. 4 11 Configure the Wi-Fi settings of a mobile device. For details on settings of your mobile device, refer to the instruction manual of the mobile device. a Enable the Wi-Fi function on the mobile device.
PLAYBACK HDMI 1 2 3 4 5 V-AUX AV 1 2 3 4 Input selection keys Basic playback procedure AUDIO 5 6 1 TUNER USB NET MAIN PARTY ZONE 2 2 1 Turn on the external devices (such as a TV or BD/DVD player) connected to the unit. 2 Use the input selection keys to select an input source. 3 Start playback on the external device or select a radio station.
Selecting the input source and favorite settings with one touch (SCENE) HDMI 1 2 3 4 5 The SCENE function allows you to select the assigned input source, sound program, Compressed Music Enhancer on/off, and HDMI output jack (RX-V777 only) with just one touch.
Selecting the sound mode HDMI 1 2 3 4 5 The unit is equipped with a variety of sound programs and surround decoders that allow you to enjoy playback sources with your favorite sound mode (such as sound field effect or stereo playback). V-AUX AV 1 2 3 4 5 6 1 AUDIO TUNER MAIN USB 2 NET PARTY ZONE 2 ❑ Selecting a sound program suitable for movies HDMI OUT • Press MOVIE repeatedly. SCENE BD DVD TV NET RADIO a Press ON SCREEN.
Enjoying stereoscopic sound fields (CINEMA DSP 3D) ■ Sound programs suitable for movies (MOVIE) The following sound programs are optimized for viewing video sources, such as movies, TV programs, and games. The unit is equipped with a variety of sound programs that utilize Yamaha’s original DSP technology (CINEMA DSP 3D). It allows you to easily create sound fields like actual movie theaters or concert halls in your room and enjoy natural stereoscopic sound fields.
❑ ENTERTAINMENT Sports This program allows listeners to enjoy the rich vividness of sport broadcasts and light entertainment programs. In sports broadcasts, the commentators’ voices are positioned clearly at the center, while the atmosphere inside the stadium is realistically conveyed by the peripheral delivery of the sounds of the fans in a suitable space. Action Game This program is suitable for action games, such as car racing and fighting games.
■ Enjoying sound field effects without surround speakers (Virtual CINEMA DSP) If you select one of the sound programs (except 2ch Stereo and 7ch Stereo) when no surround speakers are connected, the unit utilizes Yamaha’s original virtual surround technology to reproduce up to 7-channel surround sound and enable you to enjoy the well-oriented sound field only with the front-side speakers. We recommend using presence speakers in order to enjoy more effective stereoscopic sound field.
Enjoying unprocessed playback HDMI 1 2 3 You can play back input sources without any sound field effect processing. 4 5 V-AUX AV 1 2 3 5 6 1 4 TUNER USB NET ■ Playing back in original channels (straight decode) AUDIO MAIN PARTY ZONE 2 2 HDMI OUT When the straight decode mode is enabled, the unit produces stereo sound from the front speakers for 2-channel sources such as CDs, and produces unprocessed multichannel sounds for multichannel sources.
Enjoying pure high fidelity sound (Pure Direct) HDMI 1 2 3 When the Pure Direct mode is enabled, the unit plays back the selected source with the least circuitry in order to reduce the electrical noise from other circuitry (such as the front display). It allows you to enjoy Hi-Fi sound quality. 4 5 V-AUX AV 1 2 3 5 6 1 4 TUNER USB NET AUDIO MAIN PARTY ZONE 2 2 1 HDMI OUT TV NET Press PURE DIRECT. Each time you press the key, the Pure Direct mode is enabled or disabled.
Listening to FM/AM radio HDMI 1 2 3 4 5 You can tune into a radio station by specifying its frequency or selecting from registered radio stations. V-AUX AV 1 2 3 5 6 1 TUNER USB NET 4 AUDIO MAIN PARTY ZONE 2 2 HDMI OUT • The radio frequencies differ depending on the country or region where the unit is being used. The explanation of this section uses a display with frequencies used in U.K. and Europe models.
Registering favorite radio stations (presets) HDMI 1 2 3 You can register up to 40 radio stations as presets. Once you have registered stations, you can easily tune into them by selecting their preset numbers. 4 5 V-AUX AV 1 2 3 4 ■ Selecting a preset station Tune into a registered radio station by selecting its preset number. 1 Press TUNER to select “TUNER” as the input source. 2 Press PRESET repeatedly to select the desired radio station.
Radio Data System tuning • “Program Service”, “Program Type”, “Radio Text”, and “Clock Time” are not displayed if the radio station does not provide the Radio Data System service. HDMI 1 2 3 (U.K. and Europe models only) 4 5 Radio Data System is a data transmission system used by FM stations in many countries.
Operating the radio on the TV Menu HDMI 1 2 3 You can view the radio information or select a radio station on the TV. 4 5 V-AUX Submenu Function FM AM (U.K. and Europe models only) Switches to FM/AM. Tuning (+/-) Selects a frequency. Auto (+/-) Selects a radio station automatically. Memory Registers the selected station as presets. Direct Enters a frequency directly.
■ Browse screen HDMI 1 2 3 4 5 1 V-AUX AV 1 2 3 4 5 6 1 TUNER USB NET AUDIO MAIN PARTY ZONE 2 3 2 HDMI OUT 2 SCENE BD DVD TV NET RADIO 1 Preset station list PROGRAM MUTE TOP MENU VOLUME Displays the list of preset stations. Use the cursor keys to select a preset station and press ENTER to tune into it.
Playing back iPod music HDMI 1 2 3 4 5 You can play back iPod music on the unit using a USB cable supplied with the iPod. V-AUX AV 1 2 3 5 6 1 4 Follow the procedure below to operate the iPod contents and start playback. AUDIO TUNER MAIN USB 2 USB NET PARTY ZONE 2 HDMI OUT • For details on playable iPod devices, see “Supported devices and file formats” (p.131).
■ Browse screen HDMI 1 2 3 1 2 3 4 5 V-AUX AV 1 2 3 5 6 1 TUNER USB NET ■ Playback screen 4 1 2 AUDIO MAIN PARTY ZONE 2 HDMI OUT 4 SCENE BD DVD TV NET RADIO 1 Status indicators PROGRAM MUTE TOP MENU VOLUME Display the current shuffle/repeat settings (p.65) and playback status (such as play/pause). OPTION 3 Contents list ENTER RETURN DISPLAY BAND Menu operation keys Cursor keys ENTER RETURN MODE TUNING External device operation keys PRESET SUR.
■ Operating the iPod itself or remote control (simple play) HDMI 1 2 3 1 V-AUX AV 2 3 4 6 TUNER MAIN 1 USB 2 HDMI OUT 2 SCENE TV NET PROGRAM MUTE TOP MENU RADIO VOLUME 1 When “USB” is selected as the input source, press OPTION. Operate your iPod itself or the remote control to start playback. 2 Use the cursor keys to select “Shuffle” (Shuffle) or “Repeat” (Repeat) and press ENTER.
Playing back music stored on a USB storage device HDMI 1 2 3 4 5 You can play back music files stored on a USB storage device on the unit. V-AUX AV 1 2 3 4 The unit supports USB mass storage class devices (FAT16 or FAT32 format). AUDIO 5 6 TUNER MAIN 1 USB 2 HDMI OUT SCENE BD DVD TV NET PROGRAM MUTE TOP MENU RADIO VOLUME POP-UP/MENU ON SCREEN • Connect a USB storage device directly to the USB jack of the unit. Do not use extension cables.
2 HDMI 1 2 3 4 5 AV 2 3 5 6 1 TUNER USB NET 1 2 3 If a song is selected, playback starts and the playback screen is displayed. V-AUX 1 ■ Browse screen Use the cursor keys to select an item and press ENTER.
■ Playback screen HDMI 1 2 3 V-AUX AV 1 2 3 5 6 1 You can configure the shuffle/repeat settings for playback of USB storage device contents. 1 2 4 5 ■ Shuffle/repeat settings 4 AUDIO TUNER MAIN USB 3 2 1 When “USB” is selected as the input source, press OPTION. 2 Use the cursor keys to select “Shuffle” (Shuffle) or “Repeat” (Repeat) and press ENTER.
Playing back music stored on media servers (PCs/NAS) You can play back music files stored on your PC or DLNA-compatible NAS on the unit. • To use this function, the unit and your PC must be connected to the same router (p.30). You can check whether the network parameters (such as the IP address) are properly assigned to the unit in “Network” (p.115) in the “Information” menu. • The audio may be interrupted while using the wireless network connection. In this case, use the wired network connection.
Playback of PC music contents 3 HDMI 1 2 3 Follow the procedure below to operate the PC music contents and start playback. 4 5 V-AUX AV 1 2 3 5 6 1 TUNER USB NET You can control the PC/NAS with the menu displayed on the TV screen. 4 AUDIO MAIN PARTY ZONE 2 2 NET HDMI OUT 1 SCENE BD DVD TV NET PROGRAM MUTE TOP MENU Use the cursor keys to select an item and press ENTER. If a song is selected, playback starts and the playback screen is displayed.
■ Browse screen HDMI 1 2 3 1 2 3 4 5 V-AUX AV 1 2 3 5 6 1 TUNER USB NET ■ Playback screen 4 1 2 AUDIO MAIN PARTY ZONE 2 HDMI OUT 4 SCENE BD DVD TV 3 5 2 NET RADIO 1 Status indicators 1 Status indicators PROGRAM MUTE TOP MENU VOLUME Display the current shuffle/repeat settings (p.72) and playback status (such as play/pause). 3 Contents list RETURN DISPLAY BAND Menu operation keys Cursor keys ENTER RETURN MODE TUNING External device operation keys PRESET SUR.
■ Shuffle/repeat settings You can configure the shuffle/repeat settings for the playback of PC music content. HDMI 1 2 3 4 5 V-AUX AV 1 2 3 5 6 1 4 AUDIO TUNER MAIN USB 1 When “SERVER” is selected as the input source, press OPTION. 2 Use the cursor keys to select “Shuffle” (Shuffle) or “Repeat” (Repeat) and press ENTER. 2 NET PARTY ZONE 2 HDMI OUT SCENE BD DVD TV NET PROGRAM MUTE RADIO • To return to the previous screen during menu operations, press RETURN.
Listening to Internet radio HDMI 1 2 3 4 5 You can listen to Internet radio stations from all over the world. V-AUX Playback of Internet radio AV 1 2 3 5 6 1 4 TUNER USB NET AUDIO MAIN PARTY ZONE 2 2 NET HDMI OUT • To use this function, the unit must be connected to the Internet (p.30). You can check whether the network parameters (such as the IP address) are properly assigned to the unit in “Network” (p.115) in the “Information” menu. 1 The browse screen is displayed on the TV.
■ Browse screen HDMI 1 2 3 1 2 3 4 5 V-AUX AV 1 2 3 5 6 1 TUNER USB NET ■ Playback screen 4 1 2 AUDIO MAIN PARTY ZONE 2 HDMI OUT 4 SCENE BD DVD TV NET PROGRAM MUTE TOP MENU RADIO VOLUME RETURN DISPLAY BAND Menu operation keys Cursor keys ENTER RETURN MODE TUNING External device operation keys PRESET SUR.
Registering favorite Internet radio stations (bookmarks) HDMI 1 2 3 By registering your favorite Internet radio stations to “Bookmarks”, you can quickly access to them from the “Bookmarks” folder in the browse screen. 4 5 V-AUX AV 1 2 3 5 6 1 4 TUNER USB NET 3 AUDIO MAIN PARTY ZONE 2 2 ■ Registering the station on the browse/playback screen HDMI OUT Access the vTuner website (http://yradio.vtuner.com/) with the web browser on your PC and enter the vTuner ID.
Playing back music with AirPlay The AirPlay function allows you to play back iTunes/iPod music on the unit via network. iTunes Playback of iTunes/iPod music contents Follow the procedure below to play back iTunes/iPod music contents on the unit. PC 1 Router The unit Turn on the unit, and start iTunes on the PC or display the playback screen on the iPod. If the iTunes/iPod recognizes the unit, the AirPlay icon ( iTunes (example) (wired or wireless) ) appears.
Menu • You can turn on the unit automatically when starting playback on iTunes or iPod by setting “Network Standby” (p.108) in the “Setup” menu to “On”. HDMI 1 2 3 4 5 • You can edit the network name (the unit’s name on the network) displayed on iTunes/iPod in “Network Name” (p.109) in the “Setup” menu. V-AUX AV 1 2 3 5 6 1 4 • If you select the other input source on the unit during playback, playback on the iTunes/iPod stops automatically.
Playing back music in multiple rooms (multi-zone) The multi-zone function allows you to play back different input sources in the room where the unit is installed (Main zone) and in another room (Zone2). Preparing Zone2 For example, while you are watching TV in the living room (Main zone), another person can listen to radio in the study room (Zone2). Connect the device that will be used in Zone2 to the unit.
■ Using the unit’s internal amplifier ■ Using an external amplifier Connect the speakers placed in Zone2 to the unit with speaker cables. Connect the external amplifier (with volume control) placed in Zone2 to the unit with a stereo pin cable. To utilize the EXTRA SP terminals for Zone2 speakers, set “Power Amp Assign” (p.100) in the “Setup” menu to “7ch +1ZONE” after connecting the power cable to an AC wall outlet. The unit (rear) DC OUT 5V 0.5A EXTRA SP ZONE2/F.
■ Operating the unit from Zone2 (remote connection) You can operate the unit or external devices from Zone2 using the remote control supplied with each device if you connect an infrared signal receiver/emitter to the unit’s REMOTE IN/OUT jacks. Remote connections between Yamaha products An infrared signal transmitter is not required if you are using Yamaha products that support remote connections, as the unit does.
z Controlling Zone2 4 HDMI 1 2 3 4 5 V-AUX AV 1 2 3 4 5 6 1 AUDIO TUNER MAIN USB 2 NET PARTY ZONE 2 AV 5–6 AUDIO 1–2 TUNER USB NET 1 2 HDMI OUT MAIN/ZONE2 TV NET PROGRAM MUTE TOP MENU RADIO VOLUME MUTE VOLUME Set MAIN/ZONE2 to “ZONE2”. Refer to the instruction manual for the external device. Press z (receiver power). For details on the following operations, see the corresponding pages. Each time you press the key, Zone2 output is enabled or disabled.
■ Enjoying the same source in multiple rooms (party mode) HDMI 1 2 3 4 (RX-V777 only) 5 V-AUX AV 1 2 3 4 AUDIO 5 6 1 TUNER USB NET MAIN PARTY ZONE 2 2 HDMI OUT PARTY The party mode allows you to play back in Zone2 the same music that is being played back in the main zone. During the party mode, stereo playback is automatically selected for all zones. Utilize this function when you want to use main zone music as background music for a house party.
Controlling the unit from a web browser (web control) You can control the unit with the web control screen displayed in a web browser. Web browser • You can check the IP address of the unit in “Network” (p.115) in the “Information” menu. • You can bookmark the unit’s IP address in the browser or create a shortcut link (p.85) to access the web control screen quickly in the future. However, if you are using a DHCP server, the IP address of the unit may change each time the unit is turned on.
■ Top menu screen ■ Control screen 3 1 5 1 6 2 3 4 Moves to the control screen for the selected zone. 2 STATUS Turns on/off the power for each zone or displays the input source and volume set for each zone. 3 SETTINGS Moves to the settings screen. 4 PARTY MODE (RX-V777 only) Turns on/off the party mode (p.82). 5 SYSTEM POWER Turns on/off the power for all zones. 6 MAIN VOLUME Adjusts the volume or mutes the audio output for the main zone.
■ Settings screen Note • If the network settings are changed, you may need to restart the browser or regain access to the unit. • When using the MAC address filter, make sure you specify the MAC addresses of your network devices correctly. Otherwise, the unit will be inaccessible from your network devices such as PCs and other external devices. 1 • Do not operate the unit during the recovery process, as this may result in the incorrect recovery of the settings.
Viewing the current status HDMI 1 2 3 4 5 V-AUX Switching information on the front display AV 1 2 3 4 Input source group Item NET RADIO Song (song title), Album (album name), Station (station name), DSP Program (sound mode name), Audio Decoder (decoder name*) PHONO (RX-V777 only [except for U.S.A. and Canada models]) Input (input source name), DSP Program (sound mode name), Audio Decoder (decoder name*) AUDIO 5 6 1 TUNER USB NET MAIN PARTY ZONE 2 2 1 HDMI OUT Press INFO.
Configuring playback settings for different playback sources (Option menu) You can configure separate playback settings for different playback sources. This menu is available on the front panel (or on the TV screen), allowing you to easily configure settings during playback. 1 Press OPTION. Option menu items • Available items vary depending on the selected input source. • Text in parentheses denotes indicators on the front display. • Default settings are underlined. VOL.
■ Tone Control (Tone Control) Adaptive DRC (A.DRC) Adjusts the high-frequency range (Treble) and low-frequency range (Bass) of sounds. Choices Treble (Treble), Bass (Bass) Setting range -6.0 dB to Bypass (Bypass) to +6.0 dB, *0.5 dB increments Sets whether the dynamic range (from maximum to minimum) is automatically adjusted when the volume level is adjusted. When it is set to “On”, it is useful for listening to playback at a low volume at night.
■ Video Processing (Video Process.) Setting range 0 to 5 (The bigger the value the higher the position) Enables/disables the video signal processing (resolution and aspect ratio) settings configured in “Processing” (p.105) in the “Setup” menu. Settings Direct (Direct) Ideal position Disables the video signal processing. Processing (Processing) Enables the video signal processing. ■ Input Settings (Input Settings) Configures the input settings.
CONFIGURATIONS Configuring input sources (Input menu) 4 Use the cursor keys (q/w) to select an item and press ENTER. You can change the input source settings using the TV screen. 1 2 Press ON SCREEN. Use the cursor keys to select “Input” and press ENTER. • To return to the previous screen during menu operations, press RETURN. 3 5 6 Use the cursor keys (e/r) to select an input source to be configured and press the cursor key (q). Use the cursor keys to select a setting and press ENTER.
■ Rename/Icon Select ■ Audio In Changes the input source name and icon displayed on the front display or TV screen. Combines the video jack of the selected input source with an audio jack of others. For example, use this function in the following cases. Input sources HDMI 1–5, V-AUX, AV 1–6, AUDIO 1–2, USB, PHONO* * RX-V777 only (except for U.S.A.
■ Volume Interlock Enables/disables volume controls from iTunes/iPod via AirPlay. Configuring the SCENE function (Scene menu) You can change the settings of the SCENE function (p.51) using the TV screen. Input sources AirPlay Settings Off Disables volume controls from iTunes/iPod. Limited Enables volume controls from iTunes/iPod within the limited range (-80 dB to 0 dB and mute). Full Enables volume controls from iTunes/iPod in the full range (-80 dB to +16.5 dB and mute). 1 2 Press ON SCREEN.
4 ■ Load Use the cursor keys (q/w) to select an item and press ENTER. Loads the settings registered for the selected scene. Select “DETAIL” to configure the SCENE link playback setting or view the scene assignments. Device Control Recalls a selected scene and starts its playback on an external device connected to the unit via HDMI. (SCENE link playback) Settings 5 6 Off Disables the SCENE link playback function. HDMI Control Enables SCENE link playback using HDMI Control signals.
■ Rename/Icon Select Changes the scene name and icon displayed on the front display or TV screen. ■ Setup procedure 1 2 3 Use the cursor keys (e/r) to select an icon and press the cursor key (w). Configuring sound programs/surround decoders (Sound Program menu) You can change the settings of the sound programs and surround decoders using the TV screen. 1 2 Press ON SCREEN. 3 Use the cursor keys (e/r) to select a sound program to be configured and press the cursor key (q).
4 Use the cursor keys (q/w) to select an item and press ENTER. Sound Program menu items • Available items vary depending on the selected sound program or surround decoder. • Default settings are underlined. ■ Settings for sound programs • To return to the previous screen during menu operations, press RETURN.
■ Settings for decoders Item Function Settings Reverb Time Adjust the decay time of the rear reverberant sound. 1.0 s to 5.0 s Higher to enrich the reverberant sound and lower to have clear sound. Reverb Delay Reverb Level Adjusts the delay between the direct sound and reverberant sound generation. 0 ms to 250 ms Higher to enhance the delay effect, and lower to reduce it. Adjusts the volume of the reverberant sound. 0% to 100% Higher to strengthen the reverberant sound, and lower to weaken it.
Configuring various functions (Setup menu) 4 Use the cursor keys (q/w) to select an item and press ENTER. You can configure the unit’s various function with the menu displayed on the TV screen. 1 2 Press ON SCREEN. Use the cursor keys to select “Setup” and press ENTER. • To return to the previous screen during menu operations, press RETURN. 3 5 6 Use the cursor keys to select a setting and press ENTER. To exit from the menu, press ON SCREEN. Use the cursor keys (e/r) to select a menu.
Setup menu items Menu Item Function Page Automatically optimizes the speaker settings (YPAO). 34 Selects a speaker system. 100 Front Selects the size of the front speakers. 100 Center Selects whether or not a center speaker is connected and its size. 100 Surround Selects whether or not surround speakers are connected and their size. 100 Surround Back Selects whether or not surround back speakers are connected and their size.
Menu Network Item Page Network Connection Selects the network connection method. 107 IP Address Configures the network parameters (such as IP address). 107 Network Standby Selects whether to enable/disable the function that turns on the unit from other network devices. 108 MAC Address Filter Sets the MAC address filter to limit access to the unit from other network devices.
Speaker (Manual Setup) Front Configures the speaker settings manually. Selects the size of the front speakers. Settings • Default settings are underlined. Large Select this option for large speakers. The front speakers will produce all of the front channel frequency components. Small Select this option for small speakers. The subwoofer will produce front channel low-frequency components (configurable in “Bass Cross Over”). • “Front” is automatically set to “Large” when “Subwoofer” is set to “None”.
Surround Back Subwoofer Selects whether or not surround back speakers are connected and their sizes. Selects whether or not a subwoofer is connected and its phase. Settings Settings Large x1 Select this option when one large speaker is connected. The surround back speaker will produce all of the surround back channel frequency components. Large x2 Select this option when two large speakers are connected. The surround back speakers will produce all of the surround back channel frequency components.
■ Distance ■ Manual equalizer adjustment Sets the distance between each speaker and listening position so that sounds from the speakers reach the listening position at the same time. First, select the unit of distance from “Meter” or “Feet”. Choices Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front Presence L, Front Presence R, Subwoofer 1 2 3 Press ENTER again to enter the edit screen. Use the cursor keys to select a speaker and press ENTER.
■ Test Tone Sound Enables/disables the test tone output. Test tone output helps you to adjust the speaker balance or equalizer while confirming its effect. Configures the audio output settings. Settings Off Does not output test tones. On Outputs test tones automatically when you adjust the speaker balance or equalizer. ■ Lipsync Adjusts the delay between video and audio output. Delay Enable Enables/disables the Lipsync adjustment for each input source.
■ Adaptive DSP Level Adjustment Adjusts the delay between video and audio output manually when “Auto/Manual Select” is set to “Manual”. You can fine-adjust the audio output timing when “Auto/Manual Select” is set to “Auto”. Setting range 0 ms to 500 ms (1 ms increments) • “Offset” shows the difference between automatic adjustment and fine adjustment. ■ Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.
Video Aspect Configures the video output settings. Selects an aspect ratio to output HDMI video signals when “Video Mode” is set to “Processing”. Settings Through Does not convert the aspect ratio. 16:9 Normal Outputs 4:3 video signals to a 16:9 TV with black bands on either side of the screen. • This setting functions only when 480i/576i or 480p/576p signals are converted into 720p, 1080i, 1080p, or 2160p (4K) signals.
HDMI ARC Configures the HDMI settings. Enables/disables ARC (p.135) when “HDMI Control” is set to “On”. Settings Off Disables ARC. On Enables ARC. • You do not need to change this setting normally. In case noises are produced from the speakers connected to the unit because TV audio signals input to the unit via ARC are not supported by the unit, set “ARC” to “Off” and use the TV’s speakers. Standby Sync ■ HDMI Control Enables/disables HDMI Control (p.134).
■ Audio Output Network Selects a device to output audio. Configures the network settings. • This setting (except for “HDMI OUT2” [RX-V777 only]) is available only when “HDMI Control” is set to “Off”. Amp Enables/disables the audio output from the speakers connected to the unit. Settings Off Disables the audio output from the speakers. On Enables the audio output from the speakers.
■ Manual network settings 1 2 Set “DHCP” to “Off”. Use the cursor keys (q/w) to select a parameter type and press ENTER. IP Address Specifies an IP address. Subnet Mask Specifies a subnet mask. Default Gateway Specifies the IP address of the default gateway. DNS Server (P) Specifies the IP address of the primary DNS server. DNS Server (S) Specifies the IP address of the secondary DNS server. 3 Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to select a value.
■ Network Name Multi Zone Edits the network name (the unit’s name on the network) displayed on other network devices. Configures the multi zone settings. ■ Procedure 1 2 Press ENTER to enter the name edit screen. Use the cursor keys and ENTER to rename and select “ENTER” to confirm the entry. ■ Main Zone Set Configures the main zone setting. Zone Rename Changes the zone name (for main zone) displayed on the TV screen. • To clear the entry, select “CLEAR”.
■ Zone2 Set Function Configures the Zone2 settings. Configures the functions that make the unit easier to use. Max Volume Sets the Zone2 maximum volume to prevent excessive loudness. Setting range -30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB • This setting is available only when “Power Amp Assign” (p.100) is set to “7ch +1ZONE”. Initial Volume Sets the Zone2 initial volume for when the unit is turned on.
■ Trigger Output Target Zone Sets the TRIGGER OUT jack to function in sync with the power status of each zone or input switching. Specifies the zone with which the TRIGGER OUT jack functions are synchronized. Settings Trigger Mode Specifies the condition for the TRIGGER OUT jack to function. Main When “Trigger Mode” is set to “Power,” electronic signal transmission is synchronized with the power status of the main zone.
■ Memory Guard ECO Prevents accidental changes to the settings. Configures the power supply settings. Settings Off Does not protect the settings. On Protects the settings until “Off” is selected. • When “Memory Guard” is set to “On”, the lock icon (o) is displayed on the menu screen. Icon ■ Auto Power Standby Sets the amount of time for the auto-standby function.
■ ECO Mode Language Enables/disables the eco (power saving) mode. When the eco mode is enabled, you can reduce the unit’s power consumption. Select an on-screen menu language. Settings Off Disables the eco mode. On Enables the eco mode. • The new setting will take effect after the unit is restarted. • When “ECO Mode” is set to “On”, the front panel display may become dark. • If you want to play audio at high volume, set “ECO Mode” to “Off”.
Viewing information about the unit (Information menu) You can view information about the unit using the TV screen. 1 2 Types of information ■ Audio Signal Displays information about the current audio signal. Press ON SCREEN. Format Audio format of the input signal Use the cursor keys to select “Information” and press ENTER. Channel The number of source channels in the input signal (front/surround/LFE) For example, “5.1 (3/2/0.1)” means 5.1ch in total (3 front channels, 2 surround channels, and LFE).
■ Network ■ System Displays the network information on the unit. Displays the system information on the unit. (When using wired or wireless [Wi-Fi] network connection) Remote ID The unit’s remote control ID setting (p.116) IP address TV Format The unit’s video signal type (p.117) Subnet Mask Subnet mask Speaker Impedance The speaker impedance setting of the unit (p.116) Default Gateway The IP address of the default gateway Tuner Freq.
Changing the speaker impedance setting (SP IMP.) Configuring the system settings (ADVANCED SETUP menu) SP IMP.••8¬MIN Configure the system settings of the unit while viewing the front display. 1 2 Change the unit’s speaker impedance settings depending on the impedance of the speakers connected. Set the unit to standby mode. Settings While holding down STRAIGHT on the front panel, press MAIN ZONE z. MAIN ZONE z PROGRAM 3 4 5 6 MIN Select this option when you connect 6-ohm speakers to the unit.
Changing the FM/AM tuning frequency setting (TU) (Asia and General models only) TU••••FM50/AM9 Change the FM/AM tuning frequency setting of the unit depending on your country or region. Settings FM100/AM10 Select this when you want to adjust the FM frequency by 100-kHz steps and AM by 10-kHz steps. FM50/AM9 Select this when you want to adjust the FM frequency by 50-kHz steps and AM by 9-kHz steps.
Updating the firmware (UPDATE) UPDATE•••••USB New firmware that provides additional features or product improvements will be released as needed. Updates can be downloaded from the Yamaha website. If the unit is connected to the Internet, you can download the firmware via the network. For details, refer to the information supplied with updates. ■ Firmware update procedure Do not perform this procedure unless firmware update is necessary.
Updating the unit’s firmware via the network HDMI 1 2 3 4 5 New firmware that provides additional features or product improvements will be released as needed. If the unit is connected to the Internet, you can download the firmware via the network and update it. V-AUX AV 1 2 3 4 AUDIO 5 6 1 TUNER USB NET MAIN PARTY ZONE 2 2 BD DVD TV NET PROGRAM MUTE Note RADIO • Do not operate the unit or disconnect the power cable or network cable during firmware update.
APPENDIX Frequently asked questions The new speaker system does not provide an ideal sound balance... If you have changed speakers or have a new speaker system, use “Auto Setup” to optimize the speaker settings again (p.34). If you want to adjust the speaker settings manually, use “Manual Setup” in the “Setup” menu (p.100). Since we have small children, we want to set limitations on the volume control...
Troubleshooting Refer to the table below when the unit does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. First, check the following: a The power cables of the unit, TV and playback devices (such as BD/DVD players) are connected to AC wall outlets securely.
Problem The unit cannot be controlled using the remote control. The MHL-compatible mobile device cannot be controlled using the remote control. Cause Remedy The unit is out of the operating range. Use the remote control within the operating range (p.5). The batteries are weak. Replace with new batteries. The unit’s remote control sensor is exposed to direct sunlight or strong lighting. Adjust the lighting angle, or reposition the unit. (RX-V777 [China, Korea, U.K.
Problem No sound is coming from the subwoofer. No sound from the playback device (connected to the unit with HDMI). No sound from the TV (when HDMI Control is used). Only the front speakers work on multichannel audio. Cause Remedy The playback source does not contain LFE or low-frequency signals. To check if the subwoofer is working properly, use “Test Tone” in the “Setup” menu (p.103). Subwoofer output is disabled. Perform “Auto Setup” (p.34) or set “Subwoofer” in the “Setup” menu to “Use” (p.
Video Problem No video. No video from the playback device (connected to the unit with HDMI). Cause Remedy Another input source is selected on the unit. Select an appropriate input source with the input selection keys. Another input source is selected on the TV. Switch the TV input to display the video from the unit. The video signal output from the unit is not supported by the TV. Set “MON.CHK” in the “ADVANCED SETUP” menu to “YES” (p.117).
USB and network Problem Cause Remedy The USB device is not connected to the USB jack securely. Turn off the unit, reconnect your USB device, and turn the unit on again. The file system of the USB device is not FAT16 or FAT32. Use a USB device with FAT16 or FAT32 format. Folders and files in the USB device cannot be viewed. The data in the USB device is protected by the encryption. Use a USB device without an encryption function. The network feature does not function.
Problem Cause Remedy The unit and smartphone/tablet are not in the same network. Check the network connections and your router settings, and then connect the unit and smartphone/tablet to the same network. The MAC address filter is enabled on the unit. In “MAC Address Filter” in the “Setup” menu, disable the MAC address filter or specify the MAC address of your smartphone/tablet to allow it to access to the unit (p.108). It may not be possible depending on the condition of the network.
Error indications on the front display Message Cause Remedy Access denied Access to the PC is denied. Configure the sharing settings and select the unit as a device to which music contents are shared (p.69). Access error The unit cannot access the USB device. Turn off the unit and reconnect your USB device. If the problem persists, try another USB device. The unit cannot access the iPod. Turn off the iPod and turn it on again. The connected iPod is not supported by the unit.
Ideal speaker layout Use this diagram as a guide. You do not need to adjust the speaker layout to the following diagram exactly. E R 0.5 to 1 m (1.6 to 3.3 ft) 0.5 to 1 m (1.6 to 3.3 ft) 1.8 m (5.9 ft) 1 9 1.8 m (5.9 ft) 2 3 9 Turn it slightly inward to reduce wall reflections. Turn it slightly inward to reduce wall reflections.
Glossary Audio information ■ Audio decoding format Dolby Digital Dolby Digital is a compressed digital audio format developed by Dolby Laboratories, Inc. that supports 5.1-channel audio. This technology is used for audio on most DVD discs. Dolby Digital EX Dolby Digital EX creates total 6.1-channel audio from 5.1-channel sources that are recorded with Dolby Digital Surround EX. This decoder adds a surround back sound to the original 5.1-channel sound.
Sampling frequency/Quantization bit Sampling frequency and quantization bits indicate the quantity of information when an analog audio signal is digitized. These values are noted as in the following example: “48 kHz/24-bit”. • Sampling frequency Sampling frequency (the number of times the signal is sampled per second) is called the sampling rate. When the sampling frequency is higher, the range of frequencies that can be played back are wider.
Yamaha technologies Supported devices and file formats CINEMA DSP (Digital Sound Field Processor) Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is best experienced in a theater that has many speakers designed for acoustic effects. Since home conditions (such as room size, wall material, and number of speakers) can differ so widely, it is inevitable that there are differences in the sound that you hear.
About HTC Connect This receiver features “HTC Connect”, a simple way to enjoy all music content from your HTC Connect certified smartphone. 1. HTC Connect music streaming provided on this product has been developed based on interoperability testing as defined by the HTC Connect program with the HTC Connect compatible smartphones. 2. HTC Connect has been tested with MP3, AAC, WMA and WAV encoding formats. Other formats may not be compatible.
Video signal flow Video signals input from a video device to the unit are output to a TV as shown below. ■ Video conversion table • You can select the resolution and the aspect ratio applied to HDMI-output video processing in “Video Mode” (p.105) in the “Setup” menu. • The unit does not convert 480-line and 576-line video signals interchangeably.
(Example) Information on HDMI HDMI Control HDMI Control HDMI Control HDMI Control allows you to operate external devices via HDMI. If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit (such as power and volume) with TV remote control operations. You can also control playback devices (such as HDMI Control-compatible BD/DVD players) connected to the unit with an HDMI cable. For details on connections, see “Connecting a TV” (p.
d Use the cursor keys (e/r) to select “HDMI”. Audio Return Channel (ARC) ARC allows you to input TV audio to the unit with the HDMI cable which transmits video signal to the TV. Check the following after the HDMI Control settings. 1 2 e Use the cursor keys (q/w) to select “HDMI Control” and press ENTER. f Use the cursor keys to select “On”. g Press ON SCREEN. 3 Enable HDMI Control on the TV and playback devices (such as HDMI Control-compatible BD/DVD players).
HDMI signal compatibility Audio signals Audio signal type Audio signal format Compatible media (example) 2ch Linear PCM 2ch, 32 to 192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio Multichannel Linear PCM 8ch, 32 to 192 kHz, 16/20/24 bit DVD-Audio, BD (Blu-ray disc), HD DVD DSD 2 to 5.1ch, 2.
Trademarks Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, Surround EX and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTS-HD and the Symbol together are registered trademarks & DTS-HD Master Audio is a trademark of DTS, Inc. Product includes software.
Specifications Input jacks Output jacks Other jacks • Analog Audio • Analog Audio • YPAO MIC x 1 [RX-V777] [RX-V777] [U.S.A.
MHL Compatible Decoding Formats • Video Format (Repeater Mode) • Decoding Format - VGA - Dolby TrueHD, Dolby Digital Plus - 480i/60 Hz - Dolby Digital, Dolby Digital EX - 576i/50 Hz - DTS-HD Master Audio, DTS-HD High Resolution Audio, - 480p/60 Hz DTS Express - 576p/50 Hz - DTS 96/24, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1 - 720p/60 Hz, 50 Hz - DTS Digital Surround - 1080i/60 Hz, 50 Hz • Post Decoding Format - 1080p/30 Hz, 25 Hz, 24 Hz • Audio Format - PCM 2-ch to 8-ch (Max.
• Input Sensitivity / Input Impedance • Total Harmonic Distortion • Filter Characteristics [RX-V777] [RX-V777] (fc=40/60/80/90/100/110/120/160/200 Hz) PHONO (1 kHz, 100 W/8 ) PHONO to AV OUT (20 Hz to 20 kHz, 1 V) H.P.F. (Front, Center, Surround, Surround Back).......12 dB/oct. [Except for U.S.A. and Canada models] .............3.5 mV/47 k [Except for U.S.A. and Canada models]............. 0.02% or less L.P.F. (Subwoofer) .....................................................24 dB/oct.
AM section • Tuning Range [U.S.A. and Canada models] .................. 530 kHz to 1710 kHz [Asia and General models]...... 530/531 kHz to 1710/1611 kHz [Other models]......................................... 531 kHz to 1611 kHz General • Power Supply • Reference Dimensions (W x H x D) (with wireless antenna) [RX-V777] [China model] .........................435 x 234 x 381 mm (17-1/8” x 9-1/4” x 15”) [Other models] .................. 435 x 234 x 379 mm (17-1/8” x 9-1/4” x 14-7/8”) [RX-V677] .....
Index Symbols Exclamation mark (!) Lock icon (o) 112 115, 119 Numerics 16:9 Normal (Aspect, Setup menu) 105 2.1-channel system 18 2ch Stereo (sound program) 54 3.1-channel system 18 4.1-channel system 17 4K Ultra HD 136 5.1-channel system 17 5ch BI-AMP (Power Amp Assign, Setup menu) 100 6.1-channel system 16, 20 7.1+2-channel system 16, 19 7.1-channel system 16, 19, 20 7ch +1ZONE (Power Amp Assign, Setup menu) 100 7ch Stereo (sound program) 54 A A.
Dolby Pro Logic II (surround decoder) 56 Dolby Pro Logic IIx (surround decoder) 56 Dolby Pro Logic IIx Movie (Extended Surround) Dolby Pro Logic IIx Music (Extended Surround) Drama (sound program) 53 DSD (Direct Stream Digital) 129 DSP Level (Sound Program menu) 95 DSP Program (front display information) 86 DTS Neo:6 (surround decoder) 56 DTS-ES (Extended Surround) 104 Dynamic Range (Sound, Setup menu) 104 104 104 8, 9 101 G Ground lead 28 H E ECO (Setup menu) 112 ECO Mode (ECO, Setup menu) 113 Enhanc
MHL-compatible mobile device 29 MON.
Sound Program menu 94 SP IMP.
OYAMAHA YAMAHA CDRPORATION © 2014 Yamaha Corporation YG105B0/EN
English Français UCAB 4 TV HDMI output Téléviseur Sortie HDMI AV Receiver/Ampli-tuner audio-vidéo 5 BD/DVD player Internet Lecteur BD/DVD English Router HDMI © 2014 Yamaha Corporation Printed in Malaysia ZK77080 Easy Setup Guide/Manuel de configuration rapide Internet Routeur Connecting external devices LAN HDMI output Sortie HDMI This document explains basic connections and unit settings.
8 The unit YPAO MIC L’unité z (receiver power) key YPAO MIC jack Prise YPAO MIC 1 2 Touche (alimentation du récepteur Ampli-tuner) 3 9 HDMI 1 2 3 4 HDMI 1 5 V-AUX 2 3 6 1 TUNER MAIN USB 2 NET PARTY ZONE 2 HDMI OUT SCENE NET TV RADIO Ear height PROGRAM MUTE VOLUME VOLUME Hauteur d’oreille VOLUME CROSSOVER/ HIGH CUT TOP MENU ON SCREEN 4 MIN MAX MIN 5 POP-UP/MENU ON SCREEN OPTION ENTER Cursor keys MAX ENTER RETURN Touches de curseur YPAO microphone DISPLAY BAN
Supplement for Web Control Controlling the unit from a web browser (web control) You can control the unit with the web control screen displayed in a web browser. Web browser Note • If you are using a DHCP server, the IP address of the unit may change each time the unit is turned on. • If you have enabled the MAC address filter, you need to specify the MAC address of your PC to allow the PC to access the unit. For information on how to check the MAC address of your PC, refer to its instruction manual.
■ Top menu screen ■ Control screen 3 1 5 1 6 2 3 4 Moves to the control screen for the selected zone. 2 STATUS Turns on/off the power for each zone or displays the input source and volume set for each zone. 3 SETTINGS Moves to the settings screen. 4 PARTY MODE (Not available on some models) Turns on/off the party mode. 5 SYSTEM POWER Turns on/off the power for all zones. 6 MAIN VOLUME Adjusts the volume or mutes the audio output for the main zone.
■ Settings screen Note • When using the MAC address filter, make sure you specify the MAC addresses of your network devices correctly. Otherwise, the unit will be inaccessible from your network devices such as PCs and other external devices. • Do not operate the unit during the recovery process, as this may result in the incorrect recovery of the settings. When the recovery finishes, click “OK” to set the unit to standby mode.
eYAMAHA Quick Guide for Multi-zone 0 Multi-zone function What is the multi-zone function? Preparations The multi-zone function allows you to play back different input sources in the room where the unit is installed (main zone) and in another room (Zone2). For example, while you are watching TV in the living room (main zone), another person can listen to radio in the study room (Zone2). • Connection overview r----- )>_ I I ~~ ~ ..:::::::.- ~ -~ J,. ~ 0 • ' ! lit I ..:::::::.
• Connections 2 Caution • Before connecting the speakers, remove the unit's power cable from the AC wall outlet. Only analog audio sources (including FM/AM radio), and USB and network sources can be output to Zone2. To listen to the playback of an external device in Zone2, you need to connect the device to the analog audio input jacks. • Ensure that the core wires of the speaker cable do not touch each other or come into contact with the unit's metal areas. This may damage the unit or the speakers.
• Zone2 setup Use the supplied remote control to set the Zone2 function. 1 2 5 Use the cursor keys to select "7ch + 1ZONE" and press ENTER. 2 Press~ (receiver power). Each time you press the key, Zone2 output is enabled or disabled. Turn on the unit and TV. When Zone2 output is enabled, "ZONE2" lights up in the front display. Switch the TV input to display video from the unit. Lights up VVL-! _Il--l 3 Press ON SCREEN to display the on-screen menu on the TV.
OYAMAHA YAMAHA CORPORATION © 2014 Yamaha Corporation Printed in Malaysia ZK28590
Supplement for SiriusXM Internet Radio UC Listening to SiriusXM Internet Radio • The SiriusXM Internet Radio service is available in the U.S.A. and Canada. (Service not available in Alaska and Hawaii) 1 • Categories and channels displayed in the screen may vary depending on the region. Press NET repeatedly to select “SiriusXM” as the input source. 5 Use the cursor keys and ENTER to enter your user name and select “OK”.
Playback of SiriusXM Internet Radio contents Follow the procedure below to operate the SiriusXM Internet Radio contents and start playback. 1 ■ Browse screen 1 2 3 1 2 5 Press NET repeatedly to select “SiriusXM” as the input source. The browse screen is displayed on the TV. ■ Playback screen 1 Playback indicator 1 Playback indicator 2 List name 2 Playback information Displays the SiriusXM Internet Radio contents. Use the cursor keys (q/w) to select an item and press ENTER to confirm the selection.
■ Switching information on the front display Removing the SiriusXM Internet Radio account 1 Follow the procedure below to remove your SiriusXM Internet Radio account from the unit. Press INFO. Each time you press the key, the displayed item changes. Display items Song (song title), Artist (artist name), Channel (channel name), DSP Program (sound mode name), Audio Decoder (decoder name) 1 2 Press ON SCREEN. 3 Use the cursor keys (e/r) to select “SiriusXM Internet Radio” and press the cursor key (q).
ftYAMAHA YAMAHA CORPORAIDN © 2012 Yamaha Corporation Printed in Malaysia ZF22900
Supplement for Pandora® Using the Pandora service The Pandora service is available in the U.S.A., Australia and New Zealand only. 1 Le service Pandora est disponible aux États-Unis, en Australie et en Nouvelle-Zélande uniquement. Pandora is a free, personalized Internet radio service playing only music you love. Enter your favorite artists or tracks and Pandora will bring an effortless personal soundtrack into your living room.
If you select “NO” in Step 4 a Write down the URL and active code shown in the TV. • If playback of any Pandora station is ongoing, the playback screen is displayed. Press RETURN to display the browse screen. 2 http://xxxx.xxxxxxxxxx.xxx:xxxx/xxxxxx XXXXXXXX Use the cursor keys to select “Utility” and press ENTER. b Use a web browser on your PC to access the URL and follow the on-screen instruction to register for a Pandora account.
Playback of Pandora stations If you have created Pandora stations, follow the procedure below to select a Pandora station to be played. 1 ■ Browse screen 1 2 4 ■ Playback screen 5 Press NET repeatedly to select “Pandora” as the input source. The browse screen (My Station list) is displayed on the TV. • Submenus available in “Utility” vary depending on the selected item. 3 1 2 4 3 5 1 Playback indicators (play/pause) 2 My Station list Displays the list of Pandora stations.
Menu Utility Play Control Submenu Function Bookmark this track Adds the current track to your bookmarks on your Pandora profile page at “http://www.pandora.com”. Tired of this track Requests not to play back the current track for a month and skip to the next track. Why this track? Display the information why this track is selected. a Resumes playback from pause. s Stops playback. d Stops playback temporarily. g Skips forward. Browse Moves to the browse screen (My Station list).
Supplement for Rhapsody Using the Rhapsody® service The Rhapsody® service is available in the U.S.A. only. Le service Rhapsody® est disponible aux États-Unis uniquement. Prohibition • It is strictly prohibited to modify, reproduce, reverse-engineer or use this unit and/or built-in software for use other than audiovisual purposes. Rhapsody® account sign-in 5 If you have not signed in to your Rhapsody account yet, the sign-in screen appears when you select “Rhapsody”.
Playback of Rhapsody® contents Follow the procedure below to operate the Rhapsody contents and start playback. 1 2 Use the cursor keys to select an item and press ENTER. Menu If a song or a radio channel is selected, playback starts and the playback screen is displayed. Press NET repeatedly to select “Rhapsody” as the input source. Submenu Function Play Starts playback of the selected song/ album or radio channel. Add track to My Library Adds the song selected in the list to “My Library”.
■ Playback screen Removing the Rhapsody account • You can also use the external device operation keys (a, s, d, f, g) on the remote control to control playback. 1 2 • Some playback controls are not available during Rhapsody radio channel playback. 3 4 ■ Shuffle/repeat settings You can configure the shuffle/repeat settings for playback of Rhapsody contents. 1 Status indicators Display the current shuffle/repeat settings and playback status (play/pause).
ftYAMAHA YAMAHA CORPORATION © 2013 Yamaha Corporation YF236A0/NS2EN
Supplement for Spotify Using the Spotify service English Spotify gives you instant access to millions of songs on your mobile devices. Just hit play to stream anything you like. The Spotify Connect feature lets you choose music on your Spotify app and listen on your Yamaha home entertainment system. See Spotify.com for service area information. 1. Connect your device to your home Wi-Fi network. 2. Get Spotify app and premium free trial. 3.
Information about third party software licenses This product incorporates the following third party software. For information (copyright, etc) about each software, please read the terms and conditions stated below. By using this product, you will be deemed to have accepted the terms and conditions. Boost http://www.boost.org/ Boost Software License - Version 1.
5. Restrictions. The license granted in Section 3 above is expressly made subject to and limited by the following restrictions: a. You agree not to remove any of the original copyright, patent, trademark, and attribution notices and associated disclaimers that may appear in the Source Code or Executable Files. b. You agree not to advertise or in any way imply that this Work is a product of Your own. c.
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. libvorbis - Neither the name of the Xiph.
Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions: The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. 1.
eYAMAHA YAMAHA CORPORATlON © 2014 Yamaha Corporation Printed in Malaysia ZK13590
OYAMAHA AV Receiver For more detailed information, refer to the Owner's Manual on the CD-ROM. To view the Owner's ManuaL click on "English" in the screen displayed automatically when you insert the CD-ROM into your PC, or click on the model name if the screen to select models is displayed, and then click on "English" in the next screen. Then, follow the onscreen instructions. If the screen is not displayed automatically, open the "index.html" in the CD-ROM.
FCC INFORMATION (for US customers) COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE) Responsible Party: Yamaha Corporation of America A/V Division IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 2 3 4 5 6 7 8 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this sound system in a well ventilated, cool, dry, clean place- away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. For proper ventilation, allow the following minimum clearances.
Information for Users on Collection and Disposal of Old Equipment and Used Batteries This label is required to be attached to a product of which the temperature of the top cover may hot during operation. • For U.K. customers If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below.
OYAMAHA Yam.aha Worldwide Representative Offices For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de details sur les produits, contactez votre representant Yamaha le plus proche de chez vous ou le distributeur agree indique ci-dessous. NORTH AMERICA ---~ CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Tronto ON M1 S 3R1, Canada U.S.A. Yamaha Corporation of America 6600 Orangethorpe Ave., Buena Park, Calif. 90620 , U.S.A.
ASIA MIDDLE EAST TURKEY/CYPRUS Yamaha Music Europe GmbH Siemensstrasse 22-34, 25462 Rellingen, Germany THE PEOPLE'S REPUBLIC OF CHINA Yamaha Music & Electronics (China) Co.,Ltd. 2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu, Shanghai, China OTHER COUNTRIES Yamaha Music Gulf FZE LOB 16-513, P.O.Box 17328, Jubel Ali, Dubai, United Arab Emirates INDIA Yamaha Music India Pvt. Ltd. Spazedge building, Ground Floor, Tower A, Sector 47, Gurgaon- Sohna Road, Gurgaon , Haryana, India INDONESIA PT.
OYAMAHA Register Your New Yamaha Product Thank you for purchasing a new product from Yamaha Electronics. We would like to continue providing you with high quality products and better service. Please take a few minutes to visit our website and complete the product registration process at www.yamaha.com/VEC/registration/ Yamaha is committed to doing it's part in protecting the environment and reducing the impact on our natural resources.
evAMAHA LIMITED WARRANTY ON HOME AUDIO PRODUCTS Thank you for selecting a YAMAHA product. YAMAHA products are designed and manufactured to provide a high level of defect-free performance. Yamaha Corporation of America ("YAMAHA") is proud of the experience and craftsmanship that goes into each and every YAMAHA product.