AV Receiver Owner’s Manual English Read the supplied booklet “Safety Brochure” before using the unit.
CONTENTS Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 7 Connecting recording devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 8 Connecting the power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 FEATURES 5 9 Selecting an on-screen menu language . . . . . . . . . . . . . . . . . . . . . . . . . 29 10 Optimizing the speaker settings automatically (YPAO) . . . . . . . .
Playback of USB storage device contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Controlling external devices with the remote control . . . . . . . . . . . . . 82 Playing back music stored on media servers (PCs/NAS) . . . . . . . . . . . . 53 Registering the remote control code for a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Media sharing setup . . . . .
Accessories Operating range of the remote control Check that the following accessories are supplied with the product. • Point the remote control at the remote control sensor on the unit and remain within the operating range shown below.
Remote control
Batteries (AAA, R03, UM-4) (x2) Within 6 m (20 ft) 30° 30° Insert the batteries the right way round.
AM antenna
FM antenna *One of the above is supplied depending on the region of purchase.
FEATURES What you can do with the unit Wide variety of supported content • iPod/iPhone/iPad . p.46 • USB . p.50 • Media server (PC/NAS) . p.53 • Internet radio . p.56 • AirPlay . p.58 Supports 2- to 5.1-channel (to 7.1-channel*) speaker system. Allows you to enjoy your favorite acoustic spaces in various styles. • Automatically optimizing the speaker . p.
Full of useful functions! Useful tips ❑ Connecting various devices (p.23) ❑ Creating 3-dimensional sound fields (p.37) A number of HDMI jacks and various input/output jacks on the unit allow you to connect video devices (such as BD/DVD players), audio devices (such as CD players), game consoles, camcorders, and other devices. The Virtual Presence Speaker (VPS) function allows you to create a 3-dimensional sound field in your own room (CINEMA DSP 3D).
Part names and functions Front panel 1 2 3 4 5 6 7 8 9 : A YPAO MIC DIRECT INFO MEMORY PRESET FM AM TUNING VOLUME SCENE BD DVD PHONES INPUT TV TONE CONTROL NET PROGRAM RADIO STRAIGHT SILENT CINEMA B 1 z (power) key Turns on/off (standby) the unit. 2 Standby indicator Lights up when the unit is in standby mode under any of the following conditions. • HDMI Control is enabled (p.72) • Standby Through is enabled (p.72) • Network Standby is enabled (p.
Front display (indicators) 1 2 3 4 5 ENHANCER ADAPTIVE DRC STEREO 3 TUNED OUT 6 7 8 SLEEP SP A SP B 9 VOL. MUTE SW C L R SL SR SBL SB SBR : 1 HDMI Lights up when HDMI signals are being input or output. OUT Lights up when HDMI signals are being output. 2 CINEMA DSP Lights up when CINEMA DSP (p.37) is working. CINEMA DSP n Lights up when CINEMA DSP 3D (p.39) is working. 3 ENHANCER Lights up when Compressed Music Enhancer (p.41) is working. 4 ADAPTIVE DRC Lights up when Adaptive DRC (p.
Rear panel 1 3 2 4 5 (RX-V573 U.S.A. model) HDMI OUT HDMI 2 HDMI 1 HDMI 3 HDMI 4 (BD/DVD) NETWORK ARC ANTENNA AM FM COMPONENT VIDEO PR PR PB PB SPEAKERS FRONT CENTER SURROUND SURROUND BACK/BI AMP /ZONE B SINGLE Y COMPONENT VIDEO Y VIDEO MONITOR OUT OPTICAL COAXIAL COAXIAL OPTICAL AV 1 AV 2 AV 3 AV 4 ( TV ) AV 5 AV 6 6 AV OUT SUBWOOFER AUDIO 7 8 9 : 1 HDMI OUT jack For connecting to an HDMI-compatible TV and outputting video/audio signals (p.18).
Remote control 1 Remote control signal transmitter 1 Transmits infrared signals. CODE SET 2 SOURCE RECEIVER E Turns on/off an external device. SOURCE/RECEIVER key HDMI 1 2 3 4 1 2 3 4 5 6 AUDIO A V-AUX USB NET Changes the device (the unit or external device) that is operated with the remote control (p.83). You can operate the unit when this key lights up in orange, and an external device when this key lights up in green.
PREPARATIONS General setup procedure 1 Placing speakers (p.12) Select the speaker layout for the number of speakers that you are using and place them in your room. 2 Connecting speakers (p.15) Connect the speakers to the unit. 3 Connecting a TV (p.18) Connect a TV to the unit. 4 Connecting playback devices (p.23) Connect video devices (such as BD/DVD players) and audio devices (such as CD players) to the unit. 5 Connecting the FM/AM antennas (p.26) Connect the supplied FM/AM antennas to the unit.
1 Speaker placement 2 3 4 5 6 7 8 9 10 1 Placing speakers Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer (with built-in amplifier) in your room. This section describes the representative speaker layout examples. Caution • (U.S.A. and Canada models only) Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6 Ω MIN”.
1 Speaker placement 2 3 4 5 6 7 8 9 10 7.1-channel system (RX-V573 only) 1 9 5.1-channel system 1 2 3 9 4 5 10° to 30° 3 4 10° to 30° 6 2 5 10° to 30° 10° to 30° 7 30 cm (1 ft) or more 6.1-channel system (RX-V573 only) 1 9 4.
1 Speaker placement 2 3 4 5 6 7 8 9 10 ■ Setting the speaker impedance 3.1-channel system (U.S.A. and Canada models only) 1 9 2 3 Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the speaker impedance to “6 Ω MIN”. In this case, you can also use 4-ohm speakers as the front speakers. 1 Before connecting speakers, connect the power cable to an AC wall outlet. 2 While holding down STRAIGHT on the front panel, press z (power).
1 2 Speaker connections 3 4 5 6 7 8 9 10 2 Connecting speakers Connect the speakers placed in your room to the unit. The following diagrams provide connections for 5.1and 7.1-channel systems as examples. For other systems, connect speakers while referring to the connection diagram for the 5.1-channel system. 5.1-channel system 7.
1 2 Speaker connections 3 4 5 6 7 8 9 10 ■ Connecting speaker cables Speaker cables have two wires. One is for connecting the negative (-) terminal of the unit and the speaker, and the other is for the positive (+) terminal. If the wires are colored to prevent confusion, connect the black wire to the negative and the other wire to the positive terminal. a Remove approximately 10 mm (3/8”) of insulation from the ends of the speaker cable and twist the bare wires of the cable firmly together.
Input/output jacks and cables ■ Video/audio jacks ❑ HDMI jacks ❑ VIDEO jacks ❑ AUDIO jacks Transmit analog video signals. Use a video pin cable. (Stereo L/R jacks) Video pin cable Transmit digital video and digital sound through a single jack. Use an HDMI cable. Transmit analog stereo audio signals. Use a stereo pin cable. Stereo pin cable HDMI cable ■ Audio jacks ❑ OPTICAL jacks • Use a 19-pin HDMI cable with the HDMI logo. We recommend using a cable less than 5.0 m (16.
1 2 3 TV connection 4 5 6 7 8 9 10 3 Connecting a TV Connect a TV to the unit so that video input to the unit can be output to the TV. You can also enjoy playback of TV audio on the unit. The connection method varies depending on the functions and video input jacks available on your TV. Refer to the instruction manual of the TV and choose a connection method. Does your TV support Audio Return Channel (ARC)? Yes ■ Connection Method 1 (p.
1 2 3 TV connection 4 5 6 7 8 9 10 ❑ Necessary settings To use HDMI Control and ARC, you need to configure the following settings. 3 Configure the settings for HDMI Control. For details on settings and operating your TV, refer to the instruction manual for the TV. a Enable HDMI Control on the TV and playback devices (such as HDMI Control-compatible BD/DVD player).
1 2 3 TV connection 4 5 6 7 8 9 10 ■ Connection Method 2 (HDMI Control-compatible TV) ❑ Necessary settings Connect the TV to the unit with an HDMI cable and a digital optical cable. To use HDMI Control, you need to configure the following settings. For details on settings and operating your TV, refer to the instruction manual for the TV. • The following explanation is based on the assumption that you have not changed the “HDMI” parameters (p.72) in the “Setup” menu.
1 2 3 TV connection 4 5 6 7 8 9 10 3 Configure the settings for HDMI Control. a Enable HDMI Control on the TV and playback devices (such as a HDMI Control-compatible BD/DVD player). ■ Connection Method 3 (TV with HDMI input jacks) Connect the TV to the unit with an HDMI cable and a digital optical cable. The unit (rear) HDMI OUT jack HDMI input b Turn off the TV’s main power and then turn off the unit and playback devices.
1 2 3 TV connection 4 5 6 7 8 9 10 ■ Connection Method 4 (TV without HDMI input jacks) ❑ VIDEO (composite video) connection (with a video pin cable) When connecting any video device to the AV 1–2 (COMPONENT VIDEO) jacks of the unit, connect the TV to the MONITOR OUT (COMPONENT VIDEO) jacks. The unit (rear) When connecting any video device to the AV 3–6 (VIDEO) jacks or the VIDEO AUX (VIDEO) jack of the unit, connect the TV to the MONITOR OUT (VIDEO) jack.
1 2 3 4 Playback device connections 5 6 7 8 9 10 4 Connecting playback devices The unit is equipped with a variety of input jacks including HDMI input jacks to allow you to connect different types of playback devices. For information on how to connect an iPod or a USB storage device, see the following pages. – Connecting an iPod (p.46) ■ Component video connection Connect a video device to the unit with a component video cable and an audio cable (digital optical or digital coaxial).
1 2 3 4 Playback device connections 5 6 7 8 9 10 ■ Composite video connection ■ Changing the combination of video/audio input jacks Connect a video device to the unit with a video pin cable and an audio cable (digital coaxial, digital optical, or stereo pin cable). Choose a set of input jacks (on the unit) depending on the audio output jacks available on your video device.
1 2 3 4 Playback device connections 5 6 7 8 9 10 1 2 After connecting external devices (such as a TV and playback devices) and power cable of the unit, turn on the unit. Press AV 2 to select “AV 2” (video input jack to be used) as the input source. Connecting audio devices (such as CD players) Connect audio devices such as CD players and MD players to the unit. Depending on the audio output jacks available on your audio device, choose one of the following connections.
1 2 3 4 Playback device connections 5 FM/AM antenna connections 6 7 8 9 10 Connecting to the jacks on the front panel Use the VIDEO AUX jacks on the front panel to temporarily connect devices such as camcorders and portable audio players to the unit. Before making a connection, stop playback on the device and turn down the volume on the unit. 5 Connecting the FM/AM antennas Connect the supplied FM/AM antennas to the unit. Fix the end of the FM antenna to a wall, and place the AM antenna on a flat surface.
1 2 3 4 5 6 Network connections 7 8 9 10 6 Connecting to a network Connect the unit to your router with a commercially-available STP network cable (CAT-5 or higher straight cable). You can enjoy Internet radio or music files stored on media servers, such as PCs and Network Attached Storage (NAS), on the unit. • Some security software installed on your PC or the firewall settings of network devices (such as a router) may block the access of the unit to the network devices or the Internet.
1 2 3 4 5 6 7 Recording device connections 8 Power cable connection 9 10 7 Connecting recording devices You can connect video/audio recording devices to the AV OUT jacks. These jacks output analog video/audio signals selected as the input. 8 Connecting the power cable Before connecting the power cable (General model only) Set the switch position of VOLTAGE SELECTOR according to your local voltage. Voltages are AC 110–120/220–240 V, 50/60 Hz.
1 2 3 4 5 6 7 8 9 Language setting 10 9 Selecting an on-screen menu language CODE SET SOURCE RECEIVER RECEIVER z Select the desired on-screen menu language from English (default), French, German, Spanish, Russian and Chinese. HDMI 1 2 3 4 2 3 4 5 6 AUDIO A V-AUX USB NET AV 1 1 2 B ZONE TUNER FM AM INFO MEMORY PRESET TUNING 6 To exit from the menu, press SETUP. Press RECEIVER z to turn on the unit. • The information on the front display is provided in English only.
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup 10 Optimizing the speaker settings automatically (YPAO) CODE SET SOURCE RECEIVER RECEIVER z HDMI 1 2 3 4 2 3 4 5 6 AUDIO A V-AUX USB NET AV 1 B The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room.
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup CODE SET • To cancel the operation, disconnect the YPAO microphone, or use the cursor keys to select “Exit” and press ENTER, before starting the measurement. SOURCE RECEIVER HDMI 1 2 3 4 1 2 3 4 5 6 AUDIO A V-AUX USB NET • A speaker with a problem is indicated by blinking of the speaker indicators in the front display.
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup Error messages If any error message is displayed during the measurement, resolve the problem and perform YPAO again. Auto Setup Start ERROR E-5:Noisy Error message Exit PROCEED 5% TV screen Error message Cause E-1:No Front SP (E-1:NO FRNT SP) Remedy Front speakers are not detected. E-2:No Sur. SP (E-2:NO SUR SP) One of the surround speakers cannot be detected. E-4:SBR → SBL (E-4:SBR → SBL) A surround back speaker is connected to the R side only.
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup Warning messages If a warning message is displayed after the measurement, you can still save the measurement results by following on-screen instructions. However, we recommend you perform YPAO again in order to use the unit with the optimal speaker settings. Auto Setup Warning message Cause W-1:Out of Phase (W-1:PHASE) Check the cable connections (+/-) of the problem speaker.
PLAYBACK CODE SET SOURCE RECEIVER HDMI 1 2 3 4 1 2 3 4 5 6 AUDIO A V-AUX USB NET Input selection keys AV B ZONE Basic playback procedure 1 Turn on the external devices (such as a TV or BD/DVD player) connected to the unit. 2 Use the input selection keys to select an input source. TUNER FM AM INFO MEMORY PRESET TUNING INFO SUR.
Selecting the input source and favorite settings with one touch (SCENE) CODE SET SOURCE RECEIVER SOURCE/RECEIVER HDMI 1 2 3 4 Input selection keys AV 1 2 3 4 5 6 AUDIO A V-AUX USB NET The SCENE function allows you to select the assigned input source, sound program, Compressed Music Enhancer on/off, and target zones (RX-V573 only) with just one touch. 1 B ZONE TUNER FM INFO 1 The input source and settings registered to the corresponding scene are selected.
Selecting the sound mode CODE SET SOURCE RECEIVER The unit is equipped with a variety of sound programs and surround decoders that allow you to enjoy playback sources with your favorite sound mode (such as sound field effect or stereo playback). HDMI 1 2 3 4 AV 1 2 3 4 5 6 AUDIO A V-AUX USB NET B Selecting a sound program suitable for movies (p.37) ZONE TUNER FM Press MOVIE repeatedly. AM PRESET INFO MEMORY MOVIE MUSIC TUNING SUR.
Enjoying sound field effects (CINEMA DSP) The unit is equipped with a variety of sound programs that utilize Yamaha’s original DSP technology (CINEMA DSP). It allows you to easily create sound fields like actual movie theaters or concert halls in your room. Drama This program features stable reverberations that match a wide range of movie genres, from serious dramas to musicals and comedies. The reverberations are modest, but suitably stereophonic.
■ Sound programs suitable for music/stereo playback (MUSIC) The following sound programs are optimized for listening to music sources. You can also select stereo playback. Hall in Munich This program simulates a Munich concert hall with approximately 2,500 seats that uses stylish wood for the interior finishing. Fine, beautiful reverberations spread richly, creating a calming atmosphere. The listener’s virtual seat is at the center left of the arena.
CODE SET SOURCE RECEIVER ■ Enjoying stereoscopic sound fields (CINEMA DSP 3D) Enjoying unprocessed playback CINEMA DSP 3D creates a natural stereoscopic sound field in your room. ■ Playing back in original channels (straight decode) HDMI 1 2 3 4 You can play back input sources without any sound field effect processing. AV 1 2 3 4 5 6 AUDIO A V-AUX USB NET B CINEMA DSP 3D functions when both of the following conditions are met.
■ Playing back 2-channel sources in multichannel (surround decoder) CODE SET SOURCE RECEIVER The surround decoder enables unprocessed multichannel playback from 2-channel sources. When a multichannel source is input, it works the same way as the straight decode mode. HDMI 1 2 3 4 2 3 4 5 6 AUDIO A V-AUX USB NET AV 1 For details on each decoder see “Glossary” (p.93). B 1 ZONE TUNER FM AM PRESET INFO MEMORY MOVIE MUSIC SUR. DECODE STRAIGHT SUR.
Enjoying compressed music with enhanced sound (Compressed Music Enhancer) CODE SET SOURCE RECEIVER HDMI 1 2 1 2 3 3 4 4 5 6 AUDIO A V-AUX USB NET AV Compressed Music Enhancer adds depth and breadth to the sound, allowing you to enjoy a dynamic sound close to the original sound before it was compressed. This function can be used along with any other sound modes. B ZONE TUNER FM AM INFO MEMORY PRESET TUNING SUR.
Listening to FM/AM radio CODE SET SOURCE RECEIVER You can tune into a radio station by specifying its frequency or selecting from registered radio stations. HDMI 1 2 3 4 2 3 4 5 6 AUDIO A V-AUX USB NET AV 1 B TUNER ZONE FM AM TUNER FM AM PRESET INFO TUNING TUNING MEMORY • The radio frequencies differ depending on the country or region where the unit is being used. The explanation of this section uses a display with frequencies used in U.K. and Europe models.
Registering favorite radio stations (presets) CODE SET • To specify the preset number from which to start the registration, press PRESET or cursor keys (q/w) to select a preset number within 5 seconds after step 4 (while “READY” is displayed) and then press ENTER (or just wait for 5 seconds). SOURCE RECEIVER You can register up to 40 radio stations as presets. Once you have registered stations, you can easily tune into them by selecting their preset numbers.
CODE SET SOURCE RECEIVER HDMI 1 2 3 4 1 2 3 4 5 6 AUDIO A V-AUX USB NET AV B ZONE TUNER FM AM INFO MEMORY PRESET TUNING TUNER PRESET ■ Selecting a preset station ■ Clearing preset stations Tune into a registered radio station by selecting its preset number. Clear radio stations registered to the preset numbers. 1 Press TUNER to select “TUNER” as the input source. 1 Press TUNER to select “TUNER” as the input source.
Radio Data System tuning CODE SET • “Program Service”, “Program Type”, “Radio Text”, and “Clock Time” are not displayed if the radio station does not provide the Radio Data System service. SOURCE RECEIVER (U.K. and Europe models only) HDMI 1 2 3 4 1 2 3 4 5 6 AUDIO A V-AUX USB NET B Radio Data System is a data transmission system used by FM stations in many countries.
Playing back iPod music You can play back iPod music on the unit using a USB cable supplied with the iPod. Connecting an iPod Connect your iPod to the unit with the USB cable supplied with the iPod. • Some features may not be compatible, depending on the model or software version of the iPod. • To play back iPod videos on the unit, an Apple Composite AV Cable (not supplied) is required.
Playback of iPod content CODE SET SOURCE RECEIVER Follow the procedure below to operate the iPod contents and start playback. HDMI 1 2 3 4 AV 1 2 3 4 5 6 AUDIO A V-AUX USB NET B You can control the iPod with the menu displayed on the TV screen. USB • Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry out operations while viewing the front display, or directly operate the iPod itself in the simple play mode (p.48).
■ Playback screen CODE SET SOURCE RECEIVER 1 HDMI 1 2 1 2 3 4 3 4 1 iPod Now Playing AV ■ Operating the iPod itself or remote control (simple play) 5 V-AUX 6 AUDIO USB NET A Album Name 2 Song Title B 2:30 ZONE 5:10 To display the TV menu screen, press MODE again. TUNER FM AM INFO MEMORY [DISPLAY] to List Browse PRESET TUNING SUR. DECODE STRAIGHT MOVIE 1 Status indicators MUSIC ENHANCER DIRECT Display the current shuffle/repeat settings (p.
■ Repeat/shuffle settings CODE SET You can configure the shuffle/repeat settings of your iPod. SOURCE RECEIVER HDMI 1 2 3 4 AV 1 2 3 4 5 6 AUDIO A V-AUX USB NET • During simple play, configure the shuffle/repeat settings directly on your iPod or press MODE to display the TV menu screen and then follow the procedure below. B ZONE TUNER FM AM INFO MEMORY PRESET MUSIC ENHANCER When “USB” is selected as the input source, press OPTION.
Playing back music stored on a USB storage device CODE SET SOURCE RECEIVER You can play back music files stored on a USB storage device on the unit. Refer to the instruction manuals for the USB storage device for more information. HDMI 1 2 3 4 AV 1 2 3 4 5 6 AUDIO A V-AUX USB NET B USB • If the USB storage device contains many files, it may take time to load the them. In this case, “Loading...” appears in the front display.
2 CODE SET SOURCE RECEIVER ■ Browse screen Use the cursor keys to select an item and press ENTER. 1 HDMI 1 2 3 If a song is selected, playback starts and the playback screen is displayed. 4 AV 1 2 3 4 5 6 AUDIO A V-AUX USB NET 2 B USB Now Playing ZONE TUNER AM MEMORY MOVIE MUSIC PRESET TUNING Blues Classical Electronica Jazz Pop Rock Soundtrack Speaking 3 Artist Name FM INFO 4 USB Top 5 1/12 [DISPLAY] to Now Playing Album Name Song Title SUR.
■ Playback screen CODE SET ■ Repeat/shuffle settings You can configure the repeat/shuffle settings for playback of USB storage device contents. SOURCE RECEIVER HDMI 1 2 1 2 3 4 3 4 USB Now Playing AV 1 Artist Name 5 6 AUDIO V-AUX USB NET A Album Name Song Title B 2:30 ZONE TUNER FM INFO MEMORY MOVIE MUSIC ENHANCER Use the cursor keys to select “Shuffle” (Shuffle) or “Repeat” (Repeat) and press ENTER.
Playing back music stored on media servers (PCs/NAS) CODE SET SOURCE RECEIVER 2 3 4 AV 1 2 3 4 5 6 AUDIO A V-AUX USB NET Follow the procedure below to operate the PC music contents and start playback. ZONE • To use this function, the unit and your PC must be connected to the same router (p.27). You can check whether the network parameters (such as the IP address) are properly assigned to the unit in “Information” (p.79) in the “Setup” menu.
3 CODE SET SOURCE RECEIVER Use the cursor keys to select an item and press ENTER. ■ Browse screen 1 HDMI 1 2 3 If a song is selected, playback starts and the playback screen is displayed. 4 AV 1 2 3 4 5 6 AUDIO A V-AUX USB NET 2 B SERVER Now Playing ZONE TUNER AM MEMORY MOVIE MUSIC PRESET TUNING Blues Classical Electronica Jazz Pop Rock Soundtrack Speaking 3 Artist Name FM INFO 4 SERVER NAS A 5 1/14 [DISPLAY] to Now Playing Album Name Song Title SUR.
■ Playback screen CODE SET ■ Repeat/shuffle settings You can configure the repeat/shuffle settings for the playback of PC music content.
Listening to Internet radio CODE SET SOURCE RECEIVER You can listen to Internet radio stations from all over the world. HDMI 1 2 3 4 2 3 4 5 6 AUDIO A V-AUX USB NET You can control the Internet radio with the menu displayed on the TV screen. AV 1 B 1 Press NET repeatedly to select “NET RADIO” as the input source. The browse screen is displayed on the TV. NET ZONE • Operations with TV screen are available only when your TV is connected to the unit via HDMI.
■ Browse screen CODE SET ■ Playback screen SOURCE RECEIVER 1 HDMI 1 2 3 4 3 4 4 NET RADIO Top 1 2 5 6 AUDIO V-AUX USB NET 2 A B ZONE 1 NET RADIO Now Playing AV Bookmarks Locations Genres New Stations Popular Stations Podcasts Help 5 Station Name 2 Album Name Song Title 2:30 TUNER 3 FM AM INFO MEMORY MOVIE MUSIC PRESET TUNING SUR.
Playing back iTunes/iPod music via a network (AirPlay) The AirPlay function allows you to play back iTunes/iPod music on the unit via network. Playback of iTunes/iPod music contents Follow the procedure below to play back iTunes/iPod music contents on the unit. iTunes PC 1 Router The unit Starts playback on iTunes or iPod Turn on the unit, and start iTunes on the PC or display the playback screen on the iPod. If the iTunes/iPod recognizes the unit, the AirPlay icon ( ) appears.
CODE SET • You can turn on the unit automatically when starting playback on iTunes or iPod by setting “Network Standby” (p.78) in the “Setup” menu to “On”. SOURCE RECEIVER HDMI 1 2 3 4 1 2 3 4 5 6 AUDIO A V-AUX USB NET • You can edit the network name (the unit’s name on the network) displayed on iTunes/iPod in “Network Name” (p.78) in the “Setup” menu. AV B • To adjust the unit’s volume from the iTunes/iPod, set “Volume Interlock” (p.
Playing back music in multiple rooms (RX-V573 only) The Zone A/B function allows you to play back an input source in the room where the unit is installed (Zone A) and in another room (Zone B). For example, you can turn on Zone A (turn off Zone B) when you are in the living room, and turn on Zone B (turn off Zone A) when you are in the study room. Also, you can turn on both zones when you want to enjoy the same input source in those rooms simultaneously.
CODE SET SOURCE RECEIVER 2 3 4 1 2 3 4 5 6 AUDIO A V-AUX USB NET AV B ZONE ■ Adjusting the volume for Zone B 1 If you are bothered by volume differences between Zone A/B, follow the procedure below to adjust the volume for Zone B. Input selection keys Press ZONE A or ZONE B to enable/disable audio output to Zone A or Zone B. ZONE A ZONE B “SP A” lights up in the front display when the Zone A output is enabled and “SP B” lights up when the Zone B output is enabled.
Configuring playback settings for different playback sources (Option menu) You can configure separate playback settings for different playback sources. This menu is available on the front panel (or on the TV screen), allowing you to easily configure settings during playback. 1 Press OPTION. Option menu items • Available items vary depending on the selected input source. • Text in parentheses denotes indicators on the front display. OPTION VOL.
Item Function Repeat (Repeat) Configures the repeat setting for the iPod (p.49), USB storage device (p.52), or media server (p.55). Page — Shuffle (Shuffle) Configures the shuffle setting for the iPod (p.49), USB storage device (p.52), or media server (p.55). — Volume Interlock (Interlock) Enables/disables volume controls from iTunes/iPod via AirPlay. 65 ■ Tone Control (Tone Control) Adjusts the high-frequency range (Treble) and low-frequency range (Bass) of sounds.
■ Lipsync (Lipsync) • Some Dolby Digital EX or DTS-ES sources do not contain a flag for reproducing surround back channel. In this case, the unit reproduces the signals in 5.1-channel if “Extended Surround” is set to “Auto”. To reproduce the signals in 6.1 or 7.1-channel, set it to “bPLIIx Movie”, “bPLIIx Music”, or “EX/ES”. Enables/disables the adjustment configured in “Lipsync” (p.74) in the “Setup” menu. ❑ Enhancer (Enhancer) • This setting is applied separately to each input source.
■ Audio In (Audio In) ■ Volume Interlock (Interlock) Combines the video jack of the selected input source (HDMI 1–4 or AV 1–2) with an audio jack of others. For example, use this function in the following cases. Enables/disables volume controls from iTunes/iPod via AirPlay.
CONFIGURATIONS Configuring various functions (Setup menu) You can configure the unit’s various function with the menu displayed on the TV screen. • Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry out operations while viewing the front display. 1 2 Press SETUP. Use the cursor keys to select a menu and press ENTER.
Setup menu items Menu Item Configuration Function Power Amp Assign Subwoofer Selects whether or not a subwoofer is connected. 69 Front Selects the size of the front speakers. 69 Center Selects whether or not a center speaker is connected and its size. 69 Surround Selects whether or not surround speakers are connected and their size. 70 Surround Back (RX-V573 only) Selects whether or not surround back speakers are connected and their size.
Menu Item DSP Parameter Function Page CINEMA DSP 3D Mode Enables/disables CINEMA DSP 3D. Panorama Enables/disables the broadening effect of the front sound field. 73 73 Center Width Adjusts the broadening effect of the center sound field. 74 Dimension Adjusts the difference in level between the front and surround sound fields. 74 Center Image Adjusts the center orientation level (broadening effect) of the front sound field.
❑ Subwoofer Speaker Selects whether or not a subwoofer is connected. Configures the speaker settings manually. Settings Setup Speaker Configuration HDMI Distance Sound Level ECO Equalizer Function Test Tone Use (default) Select this option when a subwoofer is connected. The subwoofer will produce LFE (low-frequency effect) channel audio and low-frequency components from other channels. None Select this option when no subwoofer is connected.
❑ Surround ❑ Crossover Selects whether or not surround speakers are connected and their sizes. Sets the lower limit of the low-frequency components that can be output from a speaker whose size is set to “Small”. A frequency sound lower than the specified value will be produced from the subwoofer or front speakers. Settings Small (default) Select this option for small speakers. The subwoofer or front speakers will produce surround channel low-frequency components (configurable in “Crossover”).
■ Distance Sets the distance between each speaker and listening position so that sounds from the speakers reach the listening position at the same time. First, select the unit of distance from “Meter” or “Feet”. • “PEQ” is available only when the YPAO has been performed (p.30). ■ Manual equalizer adjustment Choices Front L, Front R, Center, Surround L, Surround R, Surround Back L (RX-V573 only), Surround Back R (RX-V573 only), Subwoofer 1 2 Set “EQ Select” to “GEQ”. Setting range 0.30 m to 24.00 m (1.
HDMI HDMI OUT (TV) Enables/disables the audio output from a TV connected to the HDMI OUT jack. Configures the HDMI settings. Setup Speaker Settings Off (default) Disables the audio output from the TV. On Enables the audio output from the TV. Configuration HDMI ❑ Standby Through Sound ECO Function Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode.
❑ Standby Sync Sound Select whether to use HDMI control to link the standby behavior of the TV and the unit when “HDMI Control” is set to “On”. Configures the audio output settings. Settings Off Does not set the unit to standby mode when the TV is turned off. On Sets the unit to standby mode when the TV is turned off. Auto (default) Sets the unit to standby mode when the TV is turned off only when the unit is receiving TV audio or HDMI signals.
❑ Center Width ■ Lipsync Adjusts the broadening effect of the center sound field. Higher to enhance the broadening effect, and lower to reduce it (closer to center). This setting is effective when “bPLII Music” or “bPLIIx Music” (RX-V573 only) is selected. Adjusts the delay between video and audio output. Setting range 0 to 7 Default 3 ❑ Dimension Adjusts the difference in level between the front and surround sound fields.
■ Volume ECO Configures the volume settings. Configures the power supply settings. ❑ Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. Settings Setup Speaker Auto Power Down HDMI ECO Mode Sound ECO Maximum (default) Produces audio without adjusting the dynamic range. Standard Optimizes the dynamic range for regular home use. Min/Auto Sets the dynamic range for clear sound even at night or at low volumes.
■ ECO Mode Function Enables/disables the eco (power saving) mode. When the eco mode is enabled, you can reduce the unit’s power consumption. Configures the functions that make the unit easier to use. Settings Setup Off (default) Disables the eco mode. On Enables the eco mode. Speaker Input Rename HDMI Dimmer Sound Memory Guard ECO Function Network Language • Be sure to press ENTER to restart the unit after selecting a setting. The new setting will take effect after the unit is restarted.
4 5 To change another input source name, repeat steps 1 to 3. Network To exit from the menu, press SETUP. Configures the network settings. ■ Dimmer Setup Adjusts the brightness of the front display. Setting range -4 to 0 (higher to brighten) Default 0 • The front display may become dark when “ECO Mode” (p.76) is set to “On”. ■ Memory Guard Off (default) Does not protect the settings. On Protects the settings until “Off” is selected.
■ MAC Address Filter ■ Network Standby Sets the MAC address filter to limit access to the unit from other network devices. Selects whether the unit can be turned on from other network devices (network standby). ❑ Filter Settings Enables/disables the MAC address filter. Off (default) Disables the network standby function. On Enables the network standby function. (The unit consumes approximately 2 W of power.) Settings Off (default) Disables the MAC address filter.
■ Information Language Displays the network information on the unit. MAC Address Select an on-screen menu language.
Changing the speaker impedance setting (SP IMP.) Configuring the system settings (ADVANCED SETUP menu) (U.S.A. and Canada models only) Configure the system settings of the unit while viewing the front display. 1 2 SP IMP. 8 MIN Set the unit to standby mode. Change the unit’s speaker impedance settings depending on the impedance of the speakers connected. While holding down STRAIGHT on the front panel, press z (power).
Changing the FM/AM tuning frequency setting (TU) Updating the firmware (UPDATE) (Asia and General models only) TU FM50/AM9 Change the FM/AM tuning frequency setting of the unit depending on your country or region. Settings FM100/AM10 Select this when you want to adjust the FM frequency by 100-kHz steps and AM by 10-kHz steps. FM50/AM9 (default) Select this when you want to adjust the FM frequency by 50-kHz steps and AM by 9-kHz steps.
CODE SET SOURCE RECEIVER CODE SET You can use the unit’s remote control to operate external devices (such as BD/DVD players) if you have registered the remote control code of the external device. HDMI 1 2 3 4 2 3 4 5 6 AUDIO A V-AUX USB NET AV 1 B ZONE AM PRESET INFO MEMORY MOVIE MUSIC TUNING SUR. DECODE STRAIGHT ENHANCER DIRECT NET • If the unit’s remote control is without batteries for more than 2 minutes, the registered codes may be cleared.
CODE SET SOURCE RECEIVER SOURCE z CODE SET SOURCE/RECEIVER Registering the remote control codes for playback devices HDMI 1 2 3 4 1 2 3 4 5 6 AUDIO A V-AUX USB NET Input selection keys AV B ZONE TUNER FM AM INFO MEMORY PRESET TUNING • (RX-V473 only) If you assign the remote control code for an external device to the star (★ or ★★) key, you can operate the device with the remote control without switching the input source after pressing the star key. SUR.
CODE SET SOURCE RECEIVER CODE SET SOURCE/RECEIVER HDMI 1 2 3 4 Input selection keys AV 1 2 3 4 5 6 AUDIO A V-AUX USB NET B Resetting remote control codes You can reset a remote control code registered to each input selection key. 1 ZONE SOURCE/RECEIVER blinks twice. TUNER FM INFO Perform each of the following steps within 1 minute. Otherwise, the setting will be canceled. If this happens, repeat from Step 1. AM PRESET TUNING MEMORY SUR.
Updating the unit’s firmware CODE SET SOURCE RECEIVER New firmware that provides additional features or product improvements will be released as needed. If the unit is connected to the Internet, you can download the firmware via the network and update it. HDMI 1 2 3 4 2 3 4 5 6 AUDIO A V-AUX USB NET AV 1 Note TUNER PRESET INFO • Do not operate the unit or disconnect the power cable or network cable during firmware update.
APPENDIX Frequently asked questions The new speaker system does not provide an ideal sound balance... I want to display a device name or a manufacture name on the front display when selecting an input source... If you have changed speakers or have a new speaker system, use YPAO to optimize the speaker settings again (p.30). If you want to adjust the speaker settings manually, use “Speaker” in the “Setup” menu (p.69).
Troubleshooting Refer to the table below when the unit does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. First, check the following: a The power cables of the unit, TV and playback devices (such as BD/DVD players) are connected to AC wall outlets securely.
Audio Problem No sound. The volume cannot be increased. No sound is coming from a specific speaker. (RX-V573 only) No sound is coming from the surround back speaker. No sound is coming from the subwoofer. Cause Remedy Another input source is selected. Select an appropriate input source with the input selection keys. Signals that the unit cannot reproduce are being input. Some digital audio formats cannot be played back on the unit.
Problem No sound from the playback device (connected to the unit with HDMI). No sound from the TV (when HDMI Control is used). Only the front speakers work on multichannel audio. Cause Remedy The TV does not support HDCP (High-bandwidth Digital Content Protection). Refer to the instruction manuals for the TV and check the TV’s specifications. The unit is set not to output audio input through HDMI jacks from the SPEAKERS terminals. In “Audio Output” in the “Setup” menu, set “Amp” to “On” (p.72).
Problem Cause Remedy The TV is not connected to the unit via HDMI. You can display the menu of the unit on the TV only when they are connected with an HDMI cable. If necessary, use an HDMI cable to connect them (p.18 to 21). Another input source is selected on the TV. Switch the TV input to display the video from the unit (HDMI OUT jack). Cause Remedy The menu of the unit is not displayed on the TV. FM/AM radio Problem There is multi-path interference. FM radio reception is weak or noisy.
Problem The unit does not detect the PC. The files in the PC cannot be viewed or played back. The Internet radio cannot be played. Cause Remedy The media sharing setting is not correct. Configure the sharing setting and select the unit as a device to which music contents are shared (p.53). Some security software installed on your PC is blocking the access of the unit to your PC. Check the settings of security software installed on your PC. The unit and PC are not in the same network.
Error indications on the front display Message Cause Remedy Access denied Access to the PC is denied. Configure the sharing settings and select the unit as a device to which music contents are shared (p.53). The unit cannot access the USB device. Turn off the unit and reconnect your USB device. If the problem persists, try another USB device. The unit cannot access the iPod. Turn off the iPod and turn it on again. Access error Make sure your router and modem are turned on.
Glossary Audio information ■ Audio decoding format Dolby Digital Dolby Digital is a compressed digital audio format developed by Dolby Laboratories, Inc. that supports 5.1-channel audio. This technology is used for audio on most DVD discs. Dolby Digital EX Dolby Digital EX creates total 6.1-channel audio from 5.1-channel sources that are recorded with Dolby Digital Surround EX. This decoder adds a surround back sound to the original 5.1-channel sound.
Sampling frequency/Quantization bit Sampling frequency and quantization bits indicate the quantity of information when an analog audio signal is digitized. These values are noted as in the following example: “48 kHz/24-bit”. • Sampling frequency Sampling frequency (the number of times the signal is sampled per second) is called the sampling rate. When the sampling frequency is higher, the range of frequencies that can be played back are wider.
Yamaha technologies CINEMA DSP (Digital Sound Field Processor) Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is best experienced in a theater that has many speakers designed for acoustic effects. Since home conditions (such as room size, wall material, and number of speakers) can differ so widely, it is inevitable that there are differences in the sound that you hear.
Video signal flow Information on HDMI Video signals input from a video device to the unit are output to a TV as shown below. Video device The unit TV HDMI Control HDMI Control allows you to operate external devices via HDMI. If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit (such as power and volume) with TV remote control operations.
(Example) 7 HDMI Control HDMI Control Turns on and displays video from the playback device Playback starts Press SCENE (BD/DVD) To use HDMI Control, you need to perform the following HDMI Control link setup after connecting the TV and playback devices. Check that the unit is properly synchronized with the TV by turning off the TV or adjusting the TV volume with the TV remote control. • If HDMI Control does not work properly, try unplugging the TV in Step 2 and plugging in the TV again in Step 3.
HDMI signal compatibility Audio signals Audio signal type Audio signal format Compatible media (example) 2ch Linear PCM 2ch, 32 to 192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio Multichannel Linear PCM 8ch, 32 to 192 kHz, 16/20/24 bit DVD-Audio, BD (Blu-ray disc), HD DVD DSD 2/5.1ch, 2.
Reference diagram (rear panel) HDMI OUT HDMI 2 HDMI 1 HDMI 3 HDMI 4 (BD/DVD) NETWORK ARC ANTENNA AM FM COMPONENT VIDEO PR PR PB PB SPEAKERS FRONT CENTER SURROUND SURROUND BACK/BI AMP /ZONE B SINGLE Y COMPONENT VIDEO Y VIDEO MONITOR OUT OPTICAL COAXIAL COAXIAL OPTICAL AV 1 AV 2 AV 3 AV 4 ( TV ) AV 5 AV 6 AV OUT SUBWOOFER AUDIO (RX-V573 U.S.A. model) • The area around the video/audio output jacks is marked in white on the actual product to prevent improper connections.
Trademarks Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. (For RX-V473) Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending.
Specifications Input jacks • Analog Audio Audio x 4 (AV 5–6, AUDIO, V-AUX [Mini Jack]) • Digital Audio (Supported frequencies: 32 kHz to 96 kHz) Optical x 2 (AV 1, AV 4) Coaxial x 2 (AV 2–3) • Video • HDMI Output HDMI OUT x 1 USB • Capable of iPod, Mass Storage Class USB Memory HDMI • Current Supply Capacity: 2.1 A • HDMI Specification: Deep Color, “x.v.
Audio Section • Rated Output Power (2-channel driven) [U.S.A. and Canada models] (20 Hz to 20 kHz, 0.09% THD, 8 Ω) [Other models] (20 Hz to 20 kHz, 0.09% THD, 6 Ω) Front L/R .................................................................80 W+80 W [U.S.A. and Canada models] (1 kHz, 0.9% THD, 8 Ω) Front L/R .................................................................95 W+95 W Center ............................................................................... 95 W Surround L/R........................
General • Power Supply [U.S.A. and Canada models] ......................... AC 120 V, 60 Hz [General model]............. AC110 to 120/220 to 240 V, 50/60 Hz [China model] ................................................. AC 220 V, 50 Hz [Korea model]................................................. AC 220 V, 60 Hz [Australia model] ............................................ AC 240 V, 50 Hz [U.K. and Europe models].............................. AC 230 V, 50 Hz [Asia model] .................................
Index Symbols ★/★★ keys ................................................10 Envelope icon (p) ....................................85 Lock icon (o) ...........................................77 Numerics 2.1-channel system (Speaker placement) ............................14 2ch Stereo (Sound program) ....................38 3.1-channel system (Speaker placement) ............................14 4.1-channel system (Speaker placement) ............................13 4K signal (Video resolution) .....................
D Default Gateway (Setup menu, IP Address) .....................77 DHCP (Setup menu, IP Address) ..............77 Digital coaxial cable ..................................17 Digital Media Controller ............................78 Digital optical cable ..................................17 Dimension (Setup menu, DSP Parameter) ..............74 Dimmer (Setup menu, Function) ...............77 DIRECT (Sound mode) .............................40 Direct playback .........................................
Manual speaker configuration (Setup menu) ........................................69 Max Volume (Setup menu, Volume) ..........75 Media Sharing ...........................................53 MEMORY (FM/AM radio) ...........................43 Memory (FM/AM radio) .............................43 Memory Guard (Setup menu, Function) ...77 MODE key .................................................42 Monaural reception mode (FM radio) .......42 Mono Movie (Sound program) ..................
Sound (Setup menu) .................................73 sound field effect ......................................37 Sound mode ..............................................36 Sound program .........................................37 Sound program category ..........................37 SP A indicator ...........................................61 SP B indicator ...........................................61 SP IMP. (ADVANCED SETUP) ..................14 Speaker connection ..................................
ZoneB (Setup menu) .................................69 ZoneB Trim (Option menu) .......................
© 2012 Yamaha Corporation YE161B0/EN
English Information about software This product uses the following free software. For information (copyright, etc) about each software, read the original sentences stated below. ■ About ASN.1 object dumping code ASN.1 object dumping code, copyright Peter Gutmann , based on ASN.1 dump program by David Kemp , with contributions from various people including Matthew Hamrick , Bruno Couillard
■ About The Independent JPEG Group’s JPEG software The Independent JPEG Group’s JPEG software Copyright © 1991-2010, Thomas G. Lane, Guido Vollbeding. All Rights Reserved except as specified below. The authors make NO WARRANTY or representation, either express or implied, with respect to this software, its quality, accuracy, merchantability, or fitness for a particular purpose. This software is provided “AS IS”, and you, its user, assume the entire risk as to its quality and accuracy.
■ About RC4 Algorithm Copyright Mocana Corp 2003-2005. All Rights Reserved. Proprietary and Confidential Material. ■ About zlib Library Copyright notice: © 1995-2010 Jean-loup Gailly and Mark Adler This software is provided ‘as-is’, without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software.
RX-V473_573_esg_U.fm Page 1 Monday, January 23, 2012 2:40 PM UAB 1 Preparation AV Receiver Accessories Check that the following accessories are supplied with the product.
Remote control Easy Setup Guide Insert the batteries the right way round.
AM antenna English To reduce the impact on natural resources, the Owner’s Manual for this product is supplied on CD-ROM. For more information about this product, refer to the Owner’s Manual on the supplied CD-ROM.
RX-V473_573_esg_U.fm Page 2 Monday, January 23, 2012 2:40 PM 2 Placing speakers Set up the speakers in the room using the following diagram as a reference. For information on other speaker systems, refer to “Owner’s Manual”. 5.1-channel system 7.
RX-V473_573_esg_U.fm Page 3 Monday, January 23, 2012 2:40 PM 3 Connecting speakers/subwoofer • (U.S.A. and Canada models only) Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6 Ω MIN”. For details, see “Setting the speaker impedance” in “Owner’s Manual”. 1 Connect the front speakers (1/2) to the FRONT (//\) terminals. 2 Connect the center speaker (3) to the CENTER terminal. The unit (rear) • (Except for U.S.A.
RX-V473_573_esg_U.fm Page 4 Monday, January 23, 2012 2:40 PM 3 Connect the surround speakers (4/ 5) to the SURROUND (//\) terminals. 4 Connect the subwoofer (9) to the SUBWOOFER jack. The unit (rear) Connect the surround back speakers (6/ 7) to the SURROUND BACK (//\) terminals. The unit (rear) The unit (rear) SPEAKERS SPEAKERS SPEAKERS PB PB PB FRONT For 7.
RX-V473_573_esg_U.fm Page 5 Monday, January 23, 2012 2:40 PM 4 Connecting external devices Before connecting the power cable (General model only) Make sure you set the switch position of VOLTAGE SELECTOR according to your local voltage. Voltages are AC 110-120/220-240 V, 50/60 Hz. TV Audio out (optical) HDMI in HDMI out HDMI HDMI BD/DVD player OPTICAL HDMI O HDMI OUT jack a b Connect a TV to the unit with the other HDMI cable.
RX-V473_573_esg_U.fm Page 6 Monday, January 23, 2012 2:40 PM 5 Optimizing the speaker settings automatically (YPAO) 1 The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room. Connect the YPAO microphone to the YPAO MIC jack on the front panel. The following screen appears.
RX-V473_573_esg_U.fm Page 7 Monday, January 23, 2012 2:40 PM If “W-1:Out of Phase” appears • If any error message (such as E-1) or warning message (such as W-2) appears, see “Error messages” or “Warning messages” in “Owner’s Manual”. • If the warning message “W-1:Out of Phase” appears, see “If “W-1:Out of Phase” appears”. 3 Use the cursor keys (e/r) to select “SAVE” (Save) and press ENTER. Follow the procedure below to check the speaker connections.
RX-V473_573_esg_U.fm Page 8 Monday, January 23, 2012 2:40 PM 6 Playing back a BD/DVD Now let’s play back a BD/DVD. We recommend playing back multichannel audio (5.1-channel or more) to feel surround sound produced by the unit. Many more features! 1 Press HDMI 1 to select “HDMI 1” as the input source. VOL. HDMI1 CODE SET L SL SW C R SR SOURCE RECEIVER HDMI 1 2 3 4 1 2 3 4 5 6 AUDIO A V-AUX USB NET HDMI 1 AV 2 3 Press STRAIGHT repeatedly to select “STRAIGHT”. VOL.
List of remote control codes Liste des codes de commande Liste der Fernbedienungscodes Lista över fjärrstyrningskoder Elenco dei codici di telecomando Lista de códigos de mando a distancia TV A.R.
Crown 0058, 0161, 0171, 0179, 0320, 0323, 0343, 0349, 0350, 0351 CS Electronics 0277, 0340, 0342 CTC Clatronic 0341 CTX 0205 Curtis Mathes 0007, 0008, 0010, 0019, 0021, 0026, 0049, 0050, 0178 CXC 0058, 0179 Cybertron 0340 Cytron 0152 Daewoo 0007, 0008, 0026, 0037, 0053, 0167, 0266, 0275, 0277, 0282, 0315, 0320, 0323, 0331, 0335, 0342, 0343, 0350, 0381, 0465 Dainichi 0277, 0340 Dansai 0277, 0282, 0320, 0337, 0349, 0350 Dantax 0161, 0349 Dawa 0320 Daytron 0007, 0008, 0026, 0323, 0343 De Graaf 0346 Decca 0282
Indiana Infinity InFocus Ingelen Ingersol Initial Inno Hit Innovation Insignia Inteq Interactive Interbuy Interfunk International Intervision Irradio Isukai ITC ITS ITT ITV Janeil JBL JC Penney JCB Jensen JVC Kaisui Kamosonic Kamp Kapsch Karcher Kawasho KEC Kendo Kenwood KIC 0320, 0349, 0350 0010 0250, 0327, 0363, 0479, 0508 0347 0323, 0343 0153 0171, 0282, 0320, 0323, 0340, 0342, 0343, 0349, 0350 0337, 0343 0131, 0228, 0236, 0238 0030 0161 0323, 0343 0161, 0320, 0339, 0347, 0349, 0350 0277 0161, 0282, 03
Orion 0043, 0146, 0283, 0320, 0323, 0328, 0343, 0349, 0350 Orline 0320 Osaki 0282, 0320, 0337, 0340, 0342 Oso 0340 Otto Versand 0282, 0320, 0336, 0342, 0344, 0348, 0349, 0350 Pael 0277, 0342 Palladium 0161, 0282, 0320, 0342, 0351 Palsonic 0282 Panama 0277, 0282, 0320, 0323, 0337, 0342, 0343 Panasonic 0016, 0017, 0020, 0022, 0023, 0035, 0052, 0056, 0084, 0085, 0133, 0163, 0193, 0284, 0286, 0290, 0292, 0320, 0325, 0347, 0356, 0483, 0485, 0490 Panavision 0320 Pathe Cinema 0161, 0168, 0277, 0321, 0342 Pausa 03
Sony 0038, 0044, 0045, 0047, 0055, 0090, 0104, 0105, 0107, 0110, 0123, 0184, 0220, 0248, 0249, 0251, 0252, 0254, 0326, 0343, 0344, 0371, 0374, 0457, 0475, 0486 Sound & Vision 0340, 0341 Soundesign 0008, 0026, 0031, 0058, 0059, 0179 Soundwave 0320, 0349, 0350 Squareview 0051 SSS 0008, 0058, 0179 Standard 0282, 0320, 0323, 0340, 0342, 0343, 0350 Starlite 0058, 0179, 0320, 0323, 0349 Stenway 0348 Stern 0346, 0347 Strato 0320, 0323 Stylandia 0282 Sunkai 0343 Sunstar 0320, 0323 Sunwood 0320, 0323, 0343, 0350 Su
Bush 1008, 1009, 1024, 1025, 1029, 1049, 1051, 1063, 1217 Calix 1071 Candle 1070, 1071 Canon 1068 Cathay 1009 Catron 1030 CGE 1026, 1027 Cimline 1008, 1024, 1029 CineVision 1104 Citizen 1070, 1071 Clatronic 1008, 1030 Colortyme 1064 Condor 1009, 1025, 1030 Craig 1070, 1071 Crown 1008, 1009, 1025, 1029, 1030 Curtis Mathes 1064, 1068, 1070 Cybernex 1070 CyberPower 1016 Daewoo 1009, 1025, 1030, 1038, 1069, 1223 Dansai 1008, 1009, 1029 Dantax 1024 Daytron 1009, 1025 DBX 1064 De Graaf 1028 Decca 1026, 1027, 102
Panasonic 1000, 1022, 1044, 1055, 1068, 1072, 1085, 1090, 1091, 1120, 1121, 1214 Pathe Marconi 1027 Perdio 1026 Philco 1008, 1068 Philips 1006, 1013, 1028, 1035, 1040, 1045, 1046, 1050, 1058, 1059, 1061, 1068, 1076, 1101, 1110, 1113, 1116, 1117, 1122, 1126, 1210, 1211 Philips Magnavox 1076 Phonola 1028 Pilot 1071 Pioneer 1028, 1036 Polaroid 1088, 1099 Portland 1009, 1025, 1030 Prinz 1026 Profex 1029 Proline 1026 Proscan 1019 Prosonic 1009, 1024 Pulsar 1114 Pye 1028, 1102 Quarter 1065 Quartz 1065 Quasar 106
Brandt Broksonic Bush 2148, 2188 2145, 2146 2064, 2110, 2170, 2268, 2290, 2346, 2358, 2367, 2383 California Audio Labs 2151 Cambridge Audio 2354 CAT 2352, 2353 CAVS 2192 Centrum 2353 CGV 2354, 2362 Changhong 2140 Cinetec 2363 CineVision 2133, 2237 Clatronic 2358, 2367 Coby 2031, 2046, 2360 Conia 2383 Continental Edison 2363 Crown 2362 C-Tech 2355 Curtis Mathes 2139 CVG 2377 CyberHome 2022, 2098, 2138, 2187, 2336 Cytron 2244 Daenyx 2363 Daewoo 2001, 2133, 2276, 2298, 2330, 2362, 2363, 2377 Daewoo Internatio
Philips Phonotrend Pioneer Pointer Polaroid Portland Powerpoint Prima Proceed Proscan Prosonic Protron Provision Pye Qwestar Raite RCA RedStar Regent Reoc Rimax Rio Roadstar Ronin Rotel Rowa Rownsonic Saba Sabaki Saivod Sampo 2008, 2012, 2025, 2044, 2050, 2051, 2053, 2060, 2072, 2108, 2111, 2147, 2159, 2163, 2169, 2174, 2181, 2185, 2230, 2261, 2266, 2267, 2286, 2287, 2289, 2295, 2300, 2302, 2317, 2328, 2338, 2342, 2350, 2467 2367 2016, 2017, 2018, 2019, 2035, 2092, 2094, 2095, 2109, 2157, 2180, 2190, 221
DVD Recorder Aspire Astar Broksonic Go Video Hitachi Insignia Irradio JVC LG Liteon Panasonic Philips Pioneer Pye Samsung Sansui Sanyo Sony Sylvania Toshiba Yamaha 2222 2240 2146 2213 2062 2002 2053 2100, 2101, 2106, 2107 2033, 2057, 2223, 2238 2043 2011, 2034, 2058, 2062, 2116, 2117, 2119, 2120, 2121, 2123 2008, 2044, 2050, 2051, 2147 2017, 2035 2144 2000, 2112, 2216 2073 2217 2004, 2005, 2007, 2052, 2068, 2069, 2074, 2208, 2210, 2211 2239 2032, 2036, 2037, 2039, 2049, 2054, 2055, 2076 2056 Cable ABC ADB
Allsonic Alltech Alpha Alpha Digital Alphastar Amitronica Amstrad Anglo Ankaro Anttron Apollo Armstrong Artec Asat ASLF Astacom Astra 4005, 4008, 4024 4217 4053 4104 4077 4217 4011, 4035, 4217, 4218 4217 4005, 4008, 4024, 4217 4001, 4004 4001 4011, 4053 4100 4053, 4055 4217 4216 4009, 4011, 4054, 4217, 4219 Astro 4004, 4008, 4010, 4015, 4024, 4213, 4218, 4219 AudioTon 4004, 4048 Aurora 4222 Austar 4222 Axiel 4216 Axis 4008, 4009, 4024, 4050 BBK 4205 Best 4008, 4024 Blaupunkt 4015 Blue Sky 4217 Boca 4011, 4
LG Lifesat Lifetec Lorenzen Lorraine Lupus Luxor Lyonnaise Macab Magnavox Manata Manhattan Marantz Mascom Maspro Matsui Max Mediabox Mediamarkt Mediasat Medion Medison Mega Memorex Metronic 4049, 4103, 4107 4008, 4024, 4212, 4217 4008 4219 4049 4008, 4024 4218 4052 4052 4127, 4101 4031, 4216, 4217 4006, 4010, 4048, 4216 4055 4010 4006, 4217 4216 4219 4213 4011 4009, 4213, 4218 4008, 4024, 4217 4217 4053, 4055 4127 4001, 4004, 4005, 4010, 4028, 4031, 4217 Metz 4015 Micro electronic 4217, 4218, 4219 Micro Te
Tivax Tivo Tokai Tonna Toshiba Triad Triasat Triax Turnsat Tvonics Twinner UEC Uher UltimateTV Uniden Unisat Unitor Universum US Digital 4104 4196 4053 4006, 4012, 4048, 4217, 4218 4194, 4202, 4203 4049 4218 4015, 4215, 4217, 4218 4217 4214 4031, 4217 4222 4212 4070 4079, 4127 4011, 4050, 4053 4013 4015, 4215, 4219 4016 Variosat Vega Ventana Viewsat Visiosat Voom Vortec Welltech WeTeKom Wevasat Wewa Winersat Wisi Woorisat Worldsat Xrypton XSat Zehnder Zenith Zodiac 4015 4024 4053, 4055 4098 4013, 4048, 4
OYAMAHA Register Your New Yamaha Product Thank you for purchasing a new product from Yamaha Electronics. We would like to continue providing you with high quality products and better service. Please take a few minutes to visit our website and complete the product registration process at www.yamaha.com/VEC/registration/ Yamaha is committed to doing it's part in protecting the environment and reducing the impact on our natural resources.
OYAMAHA IUAB I AV Receiver For more detailed information, refer to the Owner's Manual on the CD-ROM. T o view the Owner's Manual, click on "English" in the screen displayed automatically when you insert the CD-ROM into your PC, or click o n the model name if the screen to select models is displayed, and then click on "Engl ish" in the next screen. T hen, follow the onscreen instructions. If the screen is not displayed automaticall y, open the " index.htm l" in the CD-RO M.
• FCC INFORMATION (for US customers) 1 IMPORT A.\'T NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2 3 IMPORT A.\'T: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 2 3 4 5 6 7 8 9 10 1I 12 13 14 15 16 17 IS 19 20 21 22 To assure the finest performance. please read this manual carefully. Keep it in a safe place for fu ture reference. Install this sound system in a well ventilated, cool. dry. clean place- away from direct sunl ight. heal sources. vibration. dust, moisture, and/or cold. For proper ventilation. allow the followi ng minimum clearances.
AVEG1A1102C Information for Users on Collection and Disposal of Old Equipment and Used Batteries :a:a :a Pb These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste.
OYAMAHA LIMITED WARRANTY ON HOME AUDIO PRODUCTS Thank you for selecting a YAMAHA product. YAMAHA products are designed and manufactured to provide a high level of defect-free performance. Yamaha Electronics Corporation, USA ("YAMAHA") is proud of the experience and craftsmanship that goes into each and every YAMAHA product.
