AV Receiver Owner’s Manual Read the supplied booklet “Safety Brochure” before using the unit.
CONTENTS Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 7 Connecting the power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 FEATURES 8 Selecting an on-screen menu language . . . . . . . . . . . . . . . . . . . . . . . . . 46 6 9 Optimizing the speaker settings automatically (YPAO) . . . . . . . . . . 47 What you can do with the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Radio Data System tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Operating the radio on the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Configuring sound programs/surround decoders (Sound Program menu) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
APPENDIX 152 Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 Power, system and remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accessories Operating range of the remote control Check that the following accessories are supplied with the product. • Point the remote control at the remote control sensor on the unit and remain within the operating range shown below. Remote control Batteries (AAA, R03, UM-4) (x2) Within 6 m (20 ft) 30° 30° Insert the batteries the right way round. AM antenna FM antenna *One of the above is supplied depending on the region of purchase.
FEATURES What you can do with the unit Wide variety of supported content • iPod/iPhone/iPad . p.83 • USB . p.86 • Media server (PC/NAS) . p.89 • Internet radio . p.92 • AirPlay . p.95 Supports 2- to 9-channel (plus rear presence) speaker system and up to 2 subwoofer connections. Allows you to enjoy favorite acoustic spaces in various styles. • Automatically optimizing the speaker . p.47 settings to suit your room (YPAO) • Reproducing stereo or multichannel . p.
Full of useful functions! Useful tips ❑ Connecting various devices (p.38) A number of HDMI jacks and various input/output jacks on the unit allow you to connect video devices (such as BD/DVD players), audio devices (such as CD players), game consoles, camcorders, and other devices. ❑ Playing back TV audio in surround sound with a single HDMI cable connection (Audio Return Channel: ARC) (p.
CINEMA DSP The excitement of a concert hall and the powerful sense of being inside a movie - we all want to enjoy these experiences in our own living room. Yamaha has pursued the fulfillment of these desires for more than 20 years, and this fulfillment has now taken shape as the Yamaha AV receivers.
Unrivaled audio and video quality YPAO is Yamaha original automatic calibration system to optimizing your sound and surround environment by using microphone measurement. It can be create ideal listening environment for maximizing high sound quality contents playback by adjusting various speakers setting and the sound field automatically. YPAO-R.S.C.
Expandable to meet diverse needs Support for bi-amp connections and external power amp expansion To obtain even high audio quality, you can connect front speakers that support power amp expansion, or expand your system by adding an external power amp (such as a Hi-Fi amp). For details, refer to “Advanced speaker configuration” (p.24). The best expandability in Yamaha Multi-zone function The multi-zone function (p.
Part names and functions Front panel 1 2 6 1 MAIN ZONE z key Turns on/off (standby) the unit. 2 Standby indicator Lights up when the unit is in standby mode under any of the following conditions. • HDMI Control is enabled (p.132) • Standby Through is enabled (p.133) • Network Standby is enabled (p.134) • An iPod is being charged (p.83) 3 7 7 Front panel door For protecting controls and jacks (p.12). 8 VOLUME knob Adjusts the volume.
■ Inside of the front panel door 9 0 M 9 ON SCREEN key Displays the on-screen menu on the TV. 0 Menu operations keys Cursor keys Select a menu or a parameter. ENTER Confirms a selected item. RETURN Returns to the previous screen. A OPTION key Displays the option menu (p.107). B DISPLAY key Displays status information on the TV (p.106). C TONE/BALANCE key Adjusts the high-frequency range and low-frequency range of output sounds (p.108).
Front display (indicators) 123 4 6 5 8 7 9 ECO MUTE VOLUME ZONE ZONE ZONE SLEEP 3 4 IN OUT 1 2 3 2 ENHANCER PARTY HD STEREO TUNED HD 3 @A B Lights up when HDMI signals are being input or output. IN Lights up when HDMI signals are being input. OUT1/OUT2 Indicates the HDMI OUT jacks currently outputting an HDMI signal. 2 ECO Lights up when the unit is in the eco mode (p.141). 3 Signal strength indicator Indicates the strength of the wireless network signal (p.59).
Rear panel 1 2 3 4 5 6 7 8 9 @ A B C D E (RX-A3040 U.S.A. model) DC OUT 5V 0.5A HDMI HDMI OUT 2 AV 1 1 (ZONE OUT) AV 2 AV 3 NETWORK AV 4 AV 5 AV 6 WIRELESS (3 NET ) AV 7 (1 BD/DVD) ARC AC IN PHONO AV 1 (1 BD/DVD) AV 2 AV 3 AV 4 AV OUT MONITOR OUT/ ZONE OUT Y PB COMPONENT VIDEO PR Y AV 2 PB TRIGGER OUT PR B 1 RS-232C REMOTE IN GND 1 OUT 1 IN OUT 2 A Y PB PR Y AV 1 AUDIO 2 AUDIO 3 AUDIO 4 AUDIO 1 (2 TV) L C AV 3 PB PR MULTI CH INPUT 12V 0.1AMAX.
(RX-A3040 U.S.A. model) DC OUT 5V 0.5A HDMI HDMI OUT 2 AV 1 1 (ZONE OUT) AV 2 AV 3 NETWORK AV 4 AV 5 AV 6 WIRELESS (3 NET ) AV 7 (1 BD/DVD) ARC AC IN PHONO AV 1 (1 BD/DVD) AV 2 AV 3 AV 4 AV OUT MONITOR OUT/ ZONE OUT Y PB COMPONENT VIDEO PR Y AV 2 PB TRIGGER OUT PR B 1 RS-232C REMOTE IN GND 1 OUT 1 IN OUT 2 A Y PB PR Y AV 1 AUDIO 2 AUDIO 3 AUDIO 4 AUDIO 1 (2 TV) L C AV 3 PB PR MULTI CH INPUT 12V 0.1AMAX.
Remote control 1 Remote control signal transmitter 1 Transmits infrared signals. 2 SOURCE z key 2 Turns on/off an external device. SOURCE key Sets the remote control to operate external devices (p.149). This key lights up in green after pressed. RECEIVER key 3 Sets the remote control to operate the unit (p.149). This key lights up in orange after pressed. RECEIVER z key Turns on/off (standby) the unit. 4 5 6 7 8 G H I J K 9 Select an input source for playback.
PREPARATIONS General setup procedure 1 Connecting speakers (p.18) Basic speaker configuration (p.19) Select the speaker layout and connect the speakers to the unit. Advanced speaker configuration (p.24) Apply bi-amp connections, channel expansion (using an external power amplifier) or multi-zone configurations to enhance the system. 2 Connecting a TV (p.35) Connect a TV to the unit. 3 Connecting playback devices (p.
1 2 3 4 5 6 7 8 9 10 1 Connecting speakers The unit has 9 built-in amplifiers. You can connect 2 to 11 speakers and up to 2 subwoofers to create the favorite acoustic space in your room. You can also apply bi-amp connections, channel expansion (using an external power amplifier) or multi-zone configurations to enhance your system (p.24). Caution • Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6 MIN”.
1 2 3 4 5 6 7 8 9 10 Basic speaker configuration ■ Placing speakers in your room Depending on the number of speakers, place the speakers and subwoofer in your room. This section describes the representative speaker layout examples. ❑ 9.2+2-channel system (using both surround back and rear presence speakers) E R 1 9 E 2 3 R 1 9 4 9 5 T Y 6 ❑ 9.
1 2 3 4 5 6 7 8 9 10 ❑ 9.2-channel system (using surround back speakers) E ❑ 7.1-channel system (using front presence speakers) R 1 9 2 3 9 4 5 6 7 This speaker system uses the front presence speakers to produce a natural 3-dimensional sound field, and also allows you to enjoy extended surround sounds using the surround back speakers. • When using front presence speakers installed to the ceiling, set “Layout (Front Presence)” (p.
1 2 3 4 5 6 7 8 9 10 ❑ 5.1-channel system ❑ Front 5.1-channel system (using front presence speakers) This speaker system creates front Virtual Presence Speaker (VPS) using the front, center and surround speakers to produce a 3-dimensional sound field, and is suited for enjoying 5.1-channel contents.
1 2 3 4 5 6 7 8 9 10 ■ Setting the speaker impedance ■ Connecting speakers Under its default settings, the unit is configured for 8-ohm speakers. When using a 6-ohm speaker for any channel, set the speaker impedance to “6 MIN”. In this case, you can also use 4-ohm speakers as the front speakers. Connect the speakers placed in your room to the unit. 1 Before connecting speakers, connect the power cable to an AC wall outlet. 2 While holding down STRAIGHT on the front panel, press MAIN ZONE z.
1 2 3 4 5 6 7 8 9 10 Cables necessary for connection (commercially available) ❑ Connecting speaker cables Speaker cables (x the number of speakers) Speaker cables have two wires. One is for connecting the negative (-) terminal of the unit and the speaker, and the other is for the positive (+) terminal. If the wires are colored to prevent confusion, connect the black wire to the negative and the other wire to the positive terminal.
1 2 3 4 5 6 7 8 9 10 Advanced speaker configuration In addition to the basic speaker configuration (p.19), the unit also allows you to apply the following speaker configurations to enhance your system. Using the four internal amplifiers for front speakers to have more high-quality sounds Bi-amp connection Combining with an external power amplifier (Hi-Fi amplifier, multi-channel amplifier, etc.
1 2 3 4 5 6 7 8 9 10 ■ Available speaker configurations (RX-A3040) Main zone Speaker configuration Output channel (max) Bi-amp Using a bi-amp connection in the main zone 7 Using a bi-amp connection in the main zone and multi-zone speakers 7 Using a bi-amp connection in the main zone and power-amp channel expansion (for presence channels) Using power-amp channel expansion (for front and/or presence channels) Using power-amp channel expansion (for front channels) and multi-zone speakers 11
1 2 3 4 5 6 7 8 9 10 ❑ 7ch BI-AMP ❑ 7ch BI-AMP +1ZONE Bi-amp 1 9 Bi-amp 1 2 3 9 9 4 5 2 2 9 3 4 5 6 6 1 7 7 Zone3 Main zone Speaker Connect to Speaker Connect to 12 FRONT and EXTRA SP 1 (bi-amp connection) 12 FRONT and EXTRA SP 1 (bi-amp connection) 3 CENTER 3 CENTER 45 SURROUND 45 SURROUND 67 SURROUND BACK 67 SURROUND BACK ER (not used) ER (not used) TY (not used) TY (not used) 9 SUBWOOFER 1–2 9 SUBWOOFER 1–2 Zone3 speakers EXTRA SP 2 • When Zone3 ou
1 2 3 4 5 6 7 8 9 10 ❑ 7ch BI-AMP +FP+RP (RX-A3040 only) ❑ 9ch +RP (RX-A3040 only) Bi-amp E R 1 R 2 3 9 1 9 4 Speaker 7 9 4 Y 6 2 3 9 5 T via external amp E via external amp via external amp 5 T via external amp via external amp Connect to Y 6 Speaker 7 Connect to 12 FRONT and EXTRA SP 1 (bi-amp connection) 12 FRONT 3 CENTER 3 CENTER 45 SURROUND 45 SURROUND 67 SURROUND BACK 67 SURROUND BACK ER F.
1 2 3 4 5 6 7 8 9 10 ❑ 9ch +FRONT (RX-A3040 only) ❑ 7ch +FP+RP (RX-A3040 only) via external amp E R E R via external amp via external amp 1 2 3 9 1 9 4 T Speaker 7 9 4 Y 6 3 9 5 2 5 T via external amp Connect to Y 6 Speaker 7 Connect to 12 FRONT (PRE OUT) via external power amplifier 12 FRONT 3 CENTER 3 CENTER 45 SURROUND 45 SURROUND 67 SURROUND BACK 67 SURROUND BACK ER EXTRA SP 1 ER F.PRESENCE (PRE OUT) via external power amplifier TY EXTRA SP 2 TY R.
1 2 3 4 5 6 7 8 9 10 ❑ 7ch +FRONT+1ZONE ❑ 5ch +FRONT+2ZONE via external amp via external amp E R 1 9 2 1 9 3 4 9 5 6 1 2 1 2 9 3 4 7 5 6 2 Zone2 7 1 Zone3 2 Main zone Main zone Zone3 Speaker Connect to Speaker Connect to 12 FRONT (PRE OUT) via external power amplifier 12 FRONT (PRE OUT) via external power amplifier 3 CENTER 3 CENTER 45 SURROUND 45 SURROUND 67 SURROUND BACK 67 SURROUND BACK ER EXTRA SP 1 ER (not used) TY (not used) TY (not used) 9 SUB
1 2 3 4 5 6 7 8 9 10 ❑ 7ch +1ZONE ❑ 9ch +1ZONE E 1 9 2 1 4 9 2 1 5 6 7 7 Zone3 Zone2 Main zone Speaker 2 9 3 4 5 6 1 2 9 3 R Main zone Connect to Speaker Connect to 12 FRONT 12 FRONT 3 CENTER 3 CENTER 45 SURROUND 45 SURROUND 67 SURROUND BACK 67 SURROUND BACK ER (not used) ER EXTRA SP 1 TY (not used) TY (not used) 9 SUBWOOFER 1–2 9 SUBWOOFER 1–2 Zone2 speakers EXTRA SP 1 Zone3 speakers EXTRA SP 2 • When Zone3 output is enabled (p.
1 2 3 4 5 6 7 8 9 10 ❑ 7ch +2ZONE 1 9 1 2 9 3 4 5 6 2 Zone2 7 1 2 Main zone Zone3 Speaker Connect to 12 FRONT 3 CENTER 45 SURROUND 67 SURROUND BACK ER (not used) TY (not used) 9 SUBWOOFER 1–2 Zone2 speakers EXTRA SP 1 Zone3 speakers EXTRA SP 2 • When Zone3 output is enabled (p.101), the surround back speakers in the main zone do not output sound.
1 2 3 4 5 6 7 8 9 10 ■ Connecting front speakers that support bi-amp connections ■ Connecting Zone2/3 speakers When using front speakers that support bi-amp connections, connect them to the FRONT terminals and EXTRA SP 1 terminals. When using Zone2/3 speakers, connect them to the EXTRA SP 1–2 terminals. To enable the bi-amp function, configure the “Power Amp Assign” setting (p.124) in the “Setup” menu after connecting the power cable to an AC wall outlet.
1 2 3 4 5 6 7 8 9 10 ■ Connecting an external power amplifier When connecting an external power amplifier to enhance speaker output, connect the input jacks of the power amplifier to the PRE OUT jacks of the unit. The same channel signals are output from the PRE OUT jacks as from their corresponding SPEAKERS terminals.
Input/output jacks and cables ■ Video/audio jacks ■ Video jacks ■ Audio jacks ❑ HDMI jacks ❑ COMPONENT VIDEO jacks ❑ OPTICAL jacks Transmit digital video and digital sound through a single jack. Use an HDMI cable. Transmit video signals separated into three components: luminance (Y), chrominance blue (PB), and chrominance red (PR). Use a component video cable with three plugs. Transmit digital audio signals. Use a digital optical cable. Remove the tip protector (if available) before using the cable.
1 2 3 4 5 6 7 8 9 10 2 Connecting a TV Connect a TV to the unit so that video input to the unit can be output to the TV. You can also enjoy playback of TV audio on the unit. To use HDMI Control and ARC, you need to configure the HDMI settings on the unit. For details on the settings, see “Information on HDMI” (p.168). To maximize the performance of the unit, we recommend connecting a TV with an HDMI cable.
1 2 3 4 5 6 7 8 9 10 ■ Component/composite video connection ❑ VIDEO (composite video) connection (with a video pin cable) When connecting any video device with a component video cable, connect the TV to the MONITOR OUT (COMPONENT VIDEO) jacks. When connecting any video device with a video pin cable, connect the TV to the MONITOR OUT (VIDEO) jack.
1 2 3 4 5 6 7 8 9 10 ■ Connecting another TV or a projector HDMI The unit has two HDMI output jacks. If you connect another TV or a projector to the unit with an HDMI cable, you can switch the TV (or projector) to be used for watching videos with the remote control (p.67). The unit (rear) HDMI OUT 2 jack HDMI OUT 2 (ZONE OUT) 1 ARC TV HDMI HDMI input HDMI Projector TV (already connected) • HDMI Control is not available on the HDMI OUT 2 jack. • If you set “HDMI OUT2 Assign” (p.
1 2 3 4 5 6 7 8 9 10 3 Connecting playback devices The unit is equipped with a variety of input jacks including HDMI input jacks to allow you to connect different types of playback devices. For information on how to connect an iPod or a USB storage device, see the following pages. • Connecting an iPod (p.83) ■ Component video connection Connect a video device to the unit with a component video cable and an audio cable (digital coaxial, digital optical or stereo pin cable).
1 2 3 4 5 6 7 8 9 10 ■ Composite video connection Connecting audio devices (such as CD players) Connect a video device to the unit with a video pin cable and an audio cable (digital coaxial, digital optical, or stereo pin cable). Choose a set of input jacks (on the unit) depending on the audio output jacks available on your video device. Connect audio devices such as CD players, MD players, and a turntable to the unit.
1 2 3 4 5 6 7 8 9 10 Connecting to the jacks on the front panel PHONO jacks PHONO Use the VIDEO AUX jack to temporarily connect a playback device to the unit. Audio output (PHONO) Ground lead GND Use the USB jack to connect an iPod or a USB storage device. For details, see “Connecting an iPod” (p.83) or “Connecting a USB storage device” (p.86). GND The unit (rear) Before making a connection, stop playback on the device and turn down the volume on the unit.
1 2 3 4 5 6 7 8 9 10 ❑ MHL connection ❑ Composite video/analog stereo connection Connect an MHL-compatible mobile device (such as smartphones) to the unit with an MHL cable. You can enjoy full HD videos and multichannel audio sources stored on the mobile device. The VIDEO AUX (HDMI/MHL IN) jack of the unit enables you to input videos and audio directly from the mobile device to the unit.
1 2 3 4 5 6 7 8 9 10 4 Connecting the FM/AM antennas Connect the supplied FM/AM antennas to the unit. Assembling the AM antenna Fix the end of the FM antenna to a wall, and place the AM antenna on a flat surface. • The location of the antenna jacks varies depending on the region of purchase. FM antenna AM antenna Connecting the AM antenna Hold down The unit (rear) Insert Release • Unwind only the length of cable needed from the AM antenna unit. • The wires of the AM antenna have no polarity.
1 2 3 4 5 6 7 8 9 10 5 Connecting a network cable or the wireless antenna Connect the unit to a router (access point) with a network cable, or connect the supplied wireless antenna for establishing a wireless network connection. Connecting the wireless antenna You can enjoy Internet radio or music files stored on media servers, such as PCs and Network Attached Storage (NAS), on the unit. Connect the supplied wireless antenna to the unit for establishing a wireless network connection.
1 2 3 4 5 6 7 8 9 10 6 Connecting other devices Connecting recording devices Connecting a device with analog multi-channel output You can connect video/audio recording devices to the AV OUT jacks. These jacks output video/audio signals selected as the input. You can connect an analog multi-channel output device such as a DVD player and an SACD player to the MULTI CH INPUT jacks. The unit (rear) • The AV OUT jacks cannot output video/audio signals input through the HDMI or COMPONENT VIDEO jacks.
1 2 3 4 5 6 7 8 9 10 Connecting a device compatible with the trigger function The trigger function can control an external device in conjunction with operating the unit (such as powering on/off and input selection). If you have a Yamaha subwoofer that supports a system connection or a device with a trigger input jack, you can use the trigger function by connecting the external device to one of the TRIGGER OUT jacks.
1 2 3 4 5 6 7 8 9 10 RECEIVER z 8 Selecting an on-screen menu language Select the desired on-screen menu language from English, Japanese, French, German, Spanish, Russian, Italian and Chinese. ON SCREEN 1 2 Press RECEIVER z to turn on the unit. 3 4 Press ON SCREEN. 5 Use the cursor keys (e/r) to select “Language” and the cursor keys (q/w) to select the desired language. Turn on the TV and switch the TV input to display video from the unit. 6 7 To confirm the setting, press ENTER.
1 2 3 4 5 6 7 8 9 10 RECEIVER z 9 Optimizing the speaker settings automatically (YPAO) The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room. 4 According to your speaker configuration, configure the “Power Amp Assign” setting (p.124) in the “Setup” menu.
1 2 3 4 5 6 7 8 9 10 ❑ Multi Position The following screen appears on the TV. RECEIVER Selects multi measure or single measure. Settings • To cancel the operation, disconnect the YPAO microphone before starting the measurement. 6 Cursor keys ENTER If desired, select the measuring options. Yes Select this option if you will have several listening positions or if you want others to enjoy surround sound. You can take measurements at up to 8 different positions in the room.
1 2 3 4 5 6 7 8 9 10 Single measure Multi measure (5 listening positions) ❑ Angle/Height (RX-A3040 only) Enables/disables the angle/height measurement. a d e bac Settings Multi measure Multi measure (1 listening position + front/back/left/right) (2 listening positions + front/back) b c a e d Yes Enables the angle/height measurement.
1 2 3 4 5 6 7 8 9 10 Measuring at one listening position (single measure) (RX-A3040 [when angle/height measurement is enabled]) Proceed to Step 2. When “Multi Position” is set to “No”, follow the procedure below for measurement. It takes about 5 minutes to perform the measurement. • If any error message (such as E-1) or warning message (such as W-1) appears, see “Error messages” (p.57) or “Warning messages” (p.58).
1 2 3 4 5 6 7 8 9 10 f Set the YPAO microphone at the top of the pole and perform the fourth angle measurement. c Place the microphone base at the listening position and set the YPAO microphone to the position “1”. Microphone base The following screen appears on the TV when the fourth angle measurement finishes. ENTER • We recommend using a tripod to place the microphone base at ear height. Use the tripod screws to fix the microphone base in place.
1 2 3 4 5 6 7 8 9 10 4 To save the measurement results, use the cursor keys (e/r) to select “SAVE” and press ENTER. Caution • The YPAO microphone is sensitive to heat, so should not be placed anywhere where it could be exposed to direct sunlight or high temperatures (such as on top of AV equipment). The adjusted speaker settings are applied. • To finish the measurement without saving the result, select “CANCEL”.
1 2 3 4 5 6 7 8 9 10 Measuring at multiple listening positions (multi measure) 3 When “Multi Position” is set to “Yes”, follow the procedure below for measurement. It takes about 15 minutes to measure 8 listening positions. When the measurements at the positions you want to measure are completed, use the cursor keys to select “CANCEL” and press ENTER. When you have taken measurements at 8 listening positions, the following screen appears automatically.
1 2 3 4 5 6 7 8 9 10 4 d Press ENTER to start the first angle measurement. Perform the angle/height measurement. a Use the cursor keys to select “YES” and press ENTER. The following screen appears on the TV when the first angle measurement finishes. Select “NO” to cancel the angle/height measurement. b Attach the supplied pole to the center of the microphone base. Pole e In the same way, perform the angle measurement for the positions “2” and “3”.
1 2 3 4 5 6 7 8 9 10 5 Use the cursor keys to select “Save/Cancel” and press ENTER. • To check the measurement results, select “Result”. For details, see “Checking the measurement results” (p.55). 6 To save the measurement result, use the cursor keys to select “SAVE” and press ENTER. 8 Disconnect the YPAO microphone from the unit. This completes optimization of the speaker settings.
1 2 3 4 5 6 7 8 9 10 2 Reloading the previous YPAO adjustments Use the cursor keys to select an item. Wiring Polarity of each speaker Reverse: The speaker cable may be connected with the reverse polarity (+/-). Size Size of each speaker (cross-over frequency of the subwoofer) Large: The speaker can reproduce low-frequency signals effectively. Small: The speaker cannot reproduce low-frequency signals effectively.
1 2 3 4 5 6 7 8 9 10 Error messages If any error message is displayed during the measurement, resolve the problem and perform YPAO again. Error message Cause Remedy E-1: No Front SP Front speakers are not detected. E-2: No Sur. SP One of the surround speakers cannot be detected. E-3: No F.PRNS SP One of the front presence speakers cannot be detected. E-4: SBR → SBL A surround back speaker is connected to the R side only.
1 2 3 4 5 6 7 8 9 10 Warning messages If a warning message is displayed after the measurement, you can still save the measurement results by following on-screen instructions. However, we recommend you perform YPAO again in order to use the unit with the optimal speaker settings. Warning message Cause Remedy W-1: Out of Phase A speaker cable may be connected with the reverse polarity (+/-). Select “Wiring” in “Result” (p.56) and check the cable connections (+/-) of the speaker identified by “Reverse”.
1 2 3 4 5 6 7 8 9 10 10 Connecting to a network device wirelessly Connect the unit to a wireless router (access point) or a mobile device by establishing a wireless connection. ■ Connecting without a wireless router (access point) Connect a mobile device to the unit directly. You can use the application for smartphone / tablet “AV CONTROLLER” to control the unit from mobiles devices or enjoy music files stored on mobiles devices on the unit.
1 2 3 4 5 6 7 8 9 10 RECEIVER z Connecting the unit to a wireless network There are several methods to connect the unit to a wireless network. Select a connection method according to your environment. Do you own iOS devices (iPhone/iPad/iPod touch)? Yes A (p.60) No Does your wireless router (access point) has a WPS button? 4 Use the cursor keys to select “Setup” and press ENTER. 5 6 Use the cursor keys (e/r) to select “Network”.
1 2 3 4 5 6 7 8 9 10 RECEIVER z 9 Connect the iOS device to the USB jack, and disable the screen lock on the iOS device. The unit (front) ■ B: Using the WPS push button configuration You can easily set up a wireless connection with one push of the WPS button. • This configuration does not work if the security method of your wireless router (access point) is WEP. In this case, use other connection method. ON SCREEN Cursor keys ENTER 10 Use the cursor keys (e/r) to select “NEXT” and 1 2 device.
1 2 3 4 5 6 7 8 9 10 RECEIVER z ■ C: Using other connection methods If your wireless router (access point) does not support WPS push button configuration method, follow the procedure below to configure the wireless network settings. 1 2 Cursor keys ENTER Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack). 3 4 Press ON SCREEN. 5 6 Use the cursor keys (e/r) to select “Network”.
1 2 3 4 5 6 7 8 9 10 ❑ Searching for an access point ❑ Setting up the wireless connection manually If you select “Access Point Scan” as the connection method, the unit starts searching for access points. After a while, the list of available access points appears on the TV screen. If you select “Manual Setting” as the connection method, the wireless connection setting screen appears on the TV. 1 Use the cursor keys and ENTER to check the desired access point and select “NEXT”.
1 2 3 4 5 6 7 8 9 10 3 Use the cursor keys and ENTER to enter the security key and select “NEXT”. If you select “None” in Step 2, this setting is not available. Proceed to Step 4. ❑ Using the PIN code If you select “PIN Code” as the connection method, the list of available access points appears on the TV screen. 1 If you select “WEP”, enter either 5 or 13 character string, or 10 or 26 hexadecimal digits. If you select other method, enter either 8 to 63 character string, or 64 hexadecimal digits.
1 2 3 4 5 6 7 8 9 10 RECEIVER z Connecting a mobile device to the unit directly (Wireless Direct) 7 Use the cursor keys (q/w) and ENTER to check “Wireless Direct” and select “OK”. Follow the procedure below to connect a mobile device to the unit directly. • Wireless Direct connection may be insecure since the communication is not strongly encrypted. The unit may operate by playback operation on wireless devices connected to the unit without permission.
1 2 3 4 5 6 7 8 9 10 9 Use the cursor keys and ENTER to enter the security key and select “NEXT”. If you select “None” in Step 8, this setting is not available. Proceed to Step 10. Otherwise, enter either 5 or 13 character string. 11 Configure the Wi-Fi settings of a mobile device. For details on settings of your mobile device, refer to the instruction manual of the mobile device. a Enable the Wi-Fi function on the mobile device.
PLAYBACK Input selection keys Basic playback procedure 1 Turn on the external devices (such as a TV or BD/DVD player) connected to the unit. 2 Use the input selection keys to select an input source. 3 Start playback on the external device or select a radio station. HDMI OUT MUTE VOLUME ON SCREEN Selecting an HDMI output jack 1 Press HDMI OUT to select an HDMI OUT jack. Each time you press the key, the HDMI OUT jack to be used for signal output changes.
Selecting the input source and favorite settings with one touch (SCENE) The SCENE function allows you to select the assigned input source, sound program, HDMI output and various settings with just one touch. You can use up to 12 scenes to register your favorite settings and switch them depending on a playback source. 1 SCENE Press SCENE. The input source and settings registered to the corresponding scene are selected. The unit turns on automatically when it is in standby mode.
SOURCE Configuring scene assignments 1 Set the unit to the condition (such as input source and sound program) that you want to assign to a scene. 2 Hold down the desired SCENE key until “SET Complete” appears on the front display.
Selecting the sound mode The unit is equipped with a variety of sound programs and surround decoders that allow you to enjoy playback sources with your favorite sound mode (such as sound field effect or stereo playback). ❑ Selecting a sound program suitable for movies • Press MOVIE repeatedly. On-screen sound program/surround decoder selection a Press ON SCREEN. b Use the cursor keys to select “Sound Program” and press ENTER.
Enjoying stereoscopic sound fields (CINEMA DSP HD3/CINEMA DSP 3D) ■ Sound programs suitable for movies (MOVIE) The following sound programs are optimized for viewing video sources, such as movies, TV programs, and games. ❑ MOVIE THEATER * CINEMA DSP HD³: RX-A3040, CINEMA DSP 3D: RX-A2040 The unit is equipped with a variety of sound programs that utilize Yamaha’s original DSP technology (CINEMA DSP HD³/CINEMA DSP 3D).
❑ ENTERTAINMENT Sports This program allows listeners to enjoy the rich vividness of sport broadcasts and light entertainment programs. In sports broadcasts, the commentators’ voices are positioned clearly at the center, while the atmosphere inside the stadium is realistically conveyed by the peripheral delivery of the sounds of the fans in a suitable space. Action Game This program is suitable for action games, such as car racing and fighting games.
❑ LIVE/CLUB Village Vanguard The Jazz club is on 7th Avenue, New York. This small club with the low ceiling makes the powerful reflections converge toward the stage located in the center. Warehouse Loft The warehouse resembles some lofts in Soho. Sound reflects off the concrete walls clearly with a lot of energy. Cellar Club This program simulates an intimate concert venue with a low ceiling and homey atmosphere.
Enjoying unprocessed playback You can play back input sources without any sound field effect processing. ■ Playing back in original channels (straight decode) When the straight decode mode is enabled, the unit produces stereo sound from the front speakers for 2-channel sources such as CDs, and produces unprocessed multichannel sounds for multichannel sources. 1 The surround decoder enables unprocessed multichannel playback from 2-channel sources.
Enjoying pure high fidelity sound (Pure Direct) When the Pure Direct mode is enabled, the unit plays back the selected source with the least circuitry in order to reduce the electrical noise from other circuitry (such as the front display). It allows you to enjoy Hi-Fi sound quality. 1 Press PURE DIRECT. Each time you press the key, the Pure Direct mode is enabled or disabled.
Listening to FM/AM radio You can tune into a radio station by specifying its frequency or selecting from registered radio stations. TUNER • The radio frequencies differ depending on the country or region where the unit is being used. The explanation of this section uses a display with frequencies used in U.K. and Europe models. • If you cannot obtain good reception on the radio, adjust the direction of the FM/AM antennas.
Registering favorite radio stations (presets) You can register up to 40 radio stations as presets. Once you have registered stations, you can easily tune into them by selecting their preset numbers. TUNER • You can automatically register FM radio stations that have strong signals and HD Radio stations (U.S.A. model only) by using “Auto Preset” (p.80, p.82). Tune into a registered radio station by selecting its preset number. 1 Press TUNER to select “TUNER” as the input source.
HD Radio™ tuning ■ Selecting an HD Radio™ audio program (U.S.A. model only) You can select an audio program when the unit is tuned into an HD Radio station that provides multiple audio programs (up to 8). HD Radio Technology is a new technology that enables FM/AM radio stations to broadcast programs digitally. Digital broadcasting provides listeners with radically improved audio quality and reception as well as new data services.
■ HD Radio™ operation on the TV TUNER Menu Submenu Function You can view the HD Radio information or select a radio station on the TV. FM 1 Tuning (+/-) Selects a frequency. Auto (+/-) Selects a radio station automatically. Program (+/-) Selects an audio program (when multiple audio programs are available). Memory Registers the selected station as presets. Direct Enters a frequency directly. Switches to FM/AM. AM Press TUNER to select “TUNER” as the input source.
■ Browse screen Radio Data System tuning (U.K. and Europe models only) 1 3 2 Radio Data System is a data transmission system used by FM stations in many countries. The unit can receive various types of Radio Data System data, such as “Program Service”, “Program Type,” “Radio Text” and “Clock Time”, when it is tuned into a Radio Data System broadcasting station. ■ Displaying the Radio Data System information 1 Preset station list Displays the list of preset stations.
Operating the radio on the TV • “Program Service”, “Program Type”, “Radio Text”, and “Clock Time” are not displayed if the radio station does not provide the Radio Data System service. TUNER ■ Receiving traffic information automatically When “TUNER” is selected as the input source, the unit automatically receives traffic information. To enable this function, follow the procedure below to set the traffic information station.
Menu Manual Tuning Submenu Function FM AM (U.K. and Europe models only) Switches to FM/AM. Tuning (+/-) Selects a frequency. Auto (+/-) Selects a radio station automatically. Memory Registers the selected station as presets. Direct Enters a frequency directly. Browse Moves to the browse screen (preset station list). Screen Off Closes the screen display and shows the background. Press one of the menu operation keys to redisplay it.
Playing back iPod music You can play back iPod music on the unit using a USB cable supplied with the iPod. Playback of iPod content Follow the procedure below to operate the iPod contents and start playback. USB • For details on playable iPod devices, see “Supported devices and file formats” (p.165). You can control the iPod with the menu displayed on the TV screen. 1 Connecting an iPod Press USB to select “USB” as the input source. The browse screen is displayed on the TV.
■ Browse screen ■ Playback screen 1 2 3 1 2 3 5 4 1 Status indicators Display the current shuffle/repeat settings (p.85) and playback status (such as play/pause). 3 Contents list External device operation keys Displays the list of iPod content. Use the cursor keys (q/w) to select an item and press ENTER to confirm the selection. 4 Item number/total 5 Operation menu Press the cursor key (r) and then use the cursor keys (q/w) to select an item. Press ENTER to confirm the selection.
■ Operating the iPod itself or remote control (simple play) 1 You can configure the shuffle/repeat settings of your iPod. Press MODE to switch to the simple play mode. The TV menu screen turns off and iPod operations are enabled. 2 ■ Shuffle/repeat settings • During simple play, configure the shuffle/repeat settings directly on your iPod or press MODE to display the TV menu screen and then follow the procedure below. To display the TV menu screen, press MODE again.
Playing back music stored on a USB storage device You can play back music files stored on a USB storage device on the unit. USB The unit supports USB mass storage class devices (FAT16 or FAT32 format). • If the USB storage device contains many files, it may take time to load the them. In this case, “Loading...” appears in the front display. • Stop playback of the USB storage device before disconnect it from the USB jack. • The audio may be interrupted while using the wireless network connection.
2 ■ Browse screen Use the cursor keys to select an item and press ENTER. 1 2 3 If a song is selected, playback starts and the playback screen is displayed. 5 4 1 Status indicators Display the current shuffle/repeat settings (p.88) and playback status (such as play/pause). 2 List name 3 Contents list Menu operation keys Cursor keys ENTER RETURN Displays the list of USB storage device contents. Use the cursor keys (q/w) to select an item and press ENTER to confirm the selection.
■ Playback screen ■ Shuffle/repeat settings You can configure the shuffle/repeat settings for playback of USB storage device contents. 1 2 3 1 When “USB” is selected as the input source, press OPTION. 2 Use the cursor keys to select “Shuffle” (Shuffle) or “Repeat” (Repeat) and press ENTER. 1 Status indicators • To return to the previous screen during menu operations, press RETURN. Display the current shuffle/repeat settings (p.88) and playback status (such as play/pause).
Playing back music stored on media servers (PCs/NAS) You can play back music files stored on your PC or DLNA-compatible NAS on the unit. • To use this function, the unit and your PC must be connected to the same router (p.43). You can check whether the network parameters (such as the IP address) are properly assigned to the unit in “Network” (p.143) in the “Information” menu. • The audio may be interrupted while using the wireless network connection. In this case, use the wired network connection.
Playback of PC music contents Follow the procedure below to operate the PC music contents and start playback. NET You can control the PC/NAS with the menu displayed on the TV screen. 1 Press NET repeatedly to select “SERVER” as the input source. • To return to the previous screen, press RETURN. • Files not supported by the unit cannot be selected. • If the unit detects a series of unsupported files (such as images and hidden files) during playback, playback stops automatically.
■ Playback screen ■ Shuffle/repeat settings You can configure the shuffle/repeat settings for the playback of PC music content. 1 2 3 1 When “SERVER” is selected as the input source, press OPTION. 2 Use the cursor keys to select “Shuffle” (Shuffle) or “Repeat” (Repeat) and press ENTER. 1 Status indicators • To return to the previous screen during menu operations, press RETURN. Display the current shuffle/repeat settings (p.91) and playback status (such as play/pause).
Listening to Internet radio You can listen to Internet radio stations from all over the world. NET • To use this function, the unit must be connected to the Internet (p.43). You can check whether the network parameters (such as the IP address) are properly assigned to the unit in “Network” (p.143) in the “Information” menu. Playback of Internet radio 1 Press NET repeatedly to select “NET RADIO” as the input source. The browse screen is displayed on the TV.
■ Browse screen ■ Playback screen 1 2 3 1 2 3 5 4 1 Playback indicator 1 Playback indicator 2 List name 2 Playback information Displays the station name, album name, song title, and elapsed time. Use the cursor keys (q/w) to select scrollable information. 3 Contents list Displays the list of Internet radio content. Use the cursor keys (q/w) to select an item and press ENTER to confirm the selection.
Registering favorite Internet radio stations (bookmarks) By registering your favorite Internet radio stations to “Bookmarks”, you can quickly access to them from the “Bookmarks” folder in the browse screen. 3 ■ Registering the station on the browse/playback screen 1 Select the desired Internet radio station in the browse screen or start playback of it to display the playback screen. 2 Press the cursor key (r) to select “Bookmark On” and press ENTER. Access the vTuner website (http://yradio.vtuner.
Playing back music with AirPlay The AirPlay function allows you to play back iTunes/iPod music on the unit via network. iTunes Playback of iTunes/iPod music contents Follow the procedure below to play back iTunes/iPod music contents on the unit. PC 1 Router The unit Turn on the unit, and start iTunes on the PC or display the playback screen on the iPod. If the iTunes/iPod recognizes the unit, the AirPlay icon ( iTunes (example) (wired or wireless) ) appears.
Menu • You can turn on the unit automatically when starting playback on iTunes or iPod by setting “Network Standby” (p.134) in the “Setup” menu to “On”. • You can edit the network name (the unit’s name on the network) displayed on iTunes/iPod in “Network Name” (p.135) in the “Setup” menu. Play Control • If you select the other input source on the unit during playback, playback on the iTunes/iPod stops automatically. • You can adjust the unit’s volume from the iTunes/iPod during playback.
Playing back videos/audio in multiple rooms (multi-zone) The multi-zone function allows you to play back different input sources in the room where the unit is installed (main zone) and in other rooms (Zone2, Zone3 and Zone4). ■ Enjoying videos/music in other rooms For example, while you are watching TV in the living room (main zone), another person can listen to PC music in the study room (Zone2), and another can listen to radio in the guest room (Zone3) and play DVD in the kitchen (Zone4).
Preparing the multi zone system ❑ Using an external amplifier Connect the device that will be used in other rooms to the unit. Connect the external amplifier placed in Zone2 or Zone3 to the unit with a stereo pin cable and connect speakers to the external amplifier. Caution The unit (rear) • Remove the unit’s power cable from the AC wall outlet before connecting speakers or an external amplifier.
■ Connecting a video monitor to play back analog videos Connect a video monitor to watch analog videos at Zone2 or Zone3. Depending on the video input jacks available on your video monitor, choose one of the video connection methods. ■ Connecting an HDMI-compatible device to play back videos/audio Connect an HDMI-compatible device (such as a TV) to play back videos/audio at Zone2 or Zone4. If you connect an AV amplifier, you can enjoy multi-channel playback in another room (Zone4).
• When the HDMI OUT 2 (ZONE OUT) jack is assigned to Zone2, you can enable/disable the audio output from the HDMI OUT 2 jack by setting “Audio Output” (p.138) in the “Setup” menu to “On” or “Off” (default). • You can also use speakers placed in Zone2 to output audio (p.32). • Videos/audio interruptions may happen in another zone when any of the following operations is performed.
Controlling Zone2, Zone3 or Zone4 Remote connections between Yamaha products RECEIVER z Input selection keys An infrared signal transmitter is not required if you are using Yamaha products that support remote connections, as the unit does. You can transmit remote control signals by connecting the REMOTE IN/OUT jacks with monaural mini-jack cables and an infrared signal receiver.
Caution • To avoid unexpected noise, never play back DTS-CDs in Zone2, Zone3 or Zone4. PARTY SCENE ■ Other operations for Zone2, Zone3 or Zone4 The party mode allows you to play back in all zones the same music that is being played back in the main zone. During the party mode, stereo playback is automatically selected for all zones. Utilize this function when you want to use main zone music as background music for a house party.
Controlling the unit from a web browser (web control) You can control the unit with the web control screen displayed in a web browser. Web browser • You can check the IP address of the unit in “Network” (p.143) in the “Information” menu. • You can bookmark the unit’s IP address in the browser or create a shortcut link (p.105) to access the web control screen quickly in the future. However, if you are using a DHCP server, the IP address of the unit may change each time the unit is turned on.
■ Top menu screen ■ Control screen 3 1 5 1 6 2 3 4 5 7 1 CONTROL Moves to the control screen for the selected zone. 2 STATUS Turns on/off the power for each zone or displays the input source and volume set for each zone. 3 SETTINGS Moves to the settings screen. 4 PARTY MODE Turns on/off the party mode (p.102). 5 SYSTEM POWER Turns on/off the power for all zones. 6 MAIN VOLUME Adjusts the volume or mutes the audio output for the main zone.
■ Settings screen Note • If the network settings are changed, you may need to restart the browser or regain access to the unit. • When using the MAC address filter, make sure you specify the MAC addresses of your network devices correctly. Otherwise, the unit will be inaccessible from your network devices such as PCs and other external devices. 1 • Do not operate the unit during the recovery process, as this may result in the incorrect recovery of the settings.
Viewing the current status Switching information on the front display 1 Press INFO. Each time you press the key, the displayed item changes.
Configuring playback settings for different playback sources (Option menu) You can configure separate playback settings for different playback sources. This menu is available on the front panel (or on the TV screen), allowing you to easily configure settings during playback. 1 Press OPTION. Option menu items • Available items vary depending on the selected input source. • Text in parentheses denotes indicators on the front display.
Item Function Audio Mode (Audio Mode) (U.S.A. model only) Switches between stereo and monaural for FM/AM radio reception. Page 111 FM Mode (FM Mode) (Except for U.S.A. model) Switches between stereo and monaural for FM radio reception. 111 Traffic Program (TrafficProgram) (U.K. and Europe models only) Automatically searches for a traffic information station. 81 Shuffle (Shuffle) Configures the shuffle setting for the iPod (p.85), USB storage device (p.88), or media server (p.91).
■ Dialogue (Dialog) Extra Bass (Extra Bass) Adjusts the volume or perceive height of dialogue sounds. Enables/disables Extra Bass. When Extra Bass is enabled, you can enjoy enhanced bass sounds, regardless of the size of the front speakers and the presence or absence of the subwoofer. Dialogue Level (Dialog Lvl) Adjusts the volume of dialogue sounds. If dialogue sounds cannot be heard clearly, you can turn up its volume by increasing this setting.
■ Video Processing (Video Process.) Audio Select (A.Sel) Configures the video signal processing settings. Selects the audio input jack to use when more than one audio connection is made for one input source. Video Mode (V.M) Enables/disables the video signal processing (resolution, aspect ratio and video adjustments) settings configured in “Processing” (p.131) in the “Setup” menu. Settings Direct (Direct) Disables the video signal processing.
■ Audio Mode (Audio Mode) (U.S.A. model only) Switches between stereo and monaural for FM/AM radio reception. • This setting is applied separately to each band (FM/AM). Settings Auto (Auto) Receives the selected band (FM or AM) in stereo sounds when the signal reception is good and in monaural sounds when it is not good. Mono (Mono) Receives the selected band (FM or AM) in monaural sounds. • HD Radio programs are not available when the unit is in the monaural reception mode.
CONFIGURATIONS Configuring input sources (Input menu) 4 Use the cursor keys (q/w) to select an item and press ENTER. You can change the input source settings using the TV screen. 1 2 Press ON SCREEN. Use the cursor keys to select “Input” and press ENTER. • To return to the previous screen during menu operations, press RETURN. 3 5 6 Use the cursor keys (e/r) to select an input source to be configured and press the cursor key (q). Use the cursor keys to select a setting and press ENTER.
■ Rename/Icon Select ■ Decoder Mode Changes the input source name and icon displayed on the front display or TV screen. Sets the format of digital audio playback to “DTS”. Input sources AV 1–7, V-AUX, AUDIO 1–4, PHONO, USB, MULTI CH ■ Setup procedure 1 Use the cursor keys (e/r) to select a template and press the cursor key (w). For example, if the unit does not detect DTS audio and outputs noise, set “Decoder Mode” to “DTS”.
Configuring the SCENE function (Scene menu) You can change the settings of the SCENE function (p.68) using the TV screen. 1 2 3 Press ON SCREEN. 5 6 Use the cursor keys and ENTER to change the setting. To exit from the menu, press ON SCREEN. Scene menu items Use the cursor keys to select “Scene” and press ENTER. Use the cursor keys (e/r) to select a scene to be configured and press the cursor key (q). Item Function Save Registers the current settings in the selected scene.
■ Load Choices Loads the settings registered for the selected scene. Input Input (p.67), Audio Select (p.110) Select “DETAIL” to configure the SCENE link playback setting or view the scene assignments. HDMI Output HDMI Output (p.67) Mode Sound Program (p.70), Pure Direct Mode (p.130), Enhancer (p.75), Enhancer Hi-Res Mode (p.109) Sound Tone Control (p.108), YPAO Volume (p.108), Adaptive DRC (p.108), Extra Bass (p.109) Surround CINEMA DSP 3D Mode (p.130), Dialogue Lift (p.
3 Use the cursor keys and ENTER to rename and select “ENTER” to confirm the entry. Configuring sound programs/surround decoders (Sound Program menu) You can change the settings of the sound programs and surround decoders using the TV screen. 1 2 Press ON SCREEN. 3 Use the cursor keys (e/r) to select a sound program to be configured and press the cursor key (q). Use the cursor keys to select “Sound Program” and press ENTER. • To clear the entry, select “CLEAR”.
4 Use the cursor keys (q/w) to select an item and press ENTER. Sound Program menu items • Available items and the default settings vary depending on the selected sound program or surround decoder. • Default settings are underlined. ■ Settings for sound programs Item • To return to the previous screen during menu operations, press RETURN. • To restore the default settings for the selected sound program, select “Reset”.
The following items are available when you select “2ch Stereo” or “9ch Stereo”. Item Function Settings Reverb Time Adjust the decay time of the rear reverberant sound. 1.0 s to 5.0 s Higher to enrich the reverberant sound and lower to have clear sound. Reverb Delay Adjusts the delay between the direct sound and reverberant sound generation. 0 ms to 250 ms Higher to enhance the delay effect, and lower to reduce it. Adjusts the volume of the reverberant sound.
■ Settings for decoders The following items are available when you set “Decode Type” of “SURROUND DECODER” to “bPLIIx Music” (bPLII Music) or “Neo:6 Music”. Decode Type bPLIIx Music (bPLII Music) Neo:6 Music Item Function Settings Panorama Adjusts the broadening effect of the front sound field. Off, On Select “On” to wrap front left/right channel sounds around the field and generate a spacious sound field in combination with the surround sound field.
Configuring various functions (Setup menu) 4 Use the cursor keys (q/w) to select an item and press ENTER. You can configure the unit’s various function with the menu displayed on the TV screen. 1 2 Press ON SCREEN. Use the cursor keys to select “Setup” and press ENTER. • To return to the previous screen during menu operations, press RETURN. 3 5 6 Use the cursor keys to select a setting and press ENTER. To exit from the menu, press ON SCREEN. Use the cursor keys (e/r) to select a menu.
Setup menu items Menu Item Function Automatically optimizes the speaker settings (YPAO). 47 Setting Pattern Registers two speaker setting patterns and switches between them. 124 Setting Data Copy Copies the “Setting Pattern” parameters in the specified direction. 124 Power Amp Assign Selects a speaker system. 124 Front Selects the size of the front speakers. 125 Center Selects whether or not a center speaker is connected and its size.
Menu Video HDMI Network Item Function Page Video Mode Enables/disables the video signal processing (resolution, aspect ratio and video adjustments). 131 HDMI Control Enables/disables HDMI Control. You can also configure the relevant settings (such as ARC and TV audio input). 132 Audio Output Selects a device to output audio. 133 Standby Through Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode.
Menu Item Function Page Auto Power Standby Sets the amount of time for the auto-standby function. 141 ECO Mode Enables/disables the eco mode (power saving mode). 141 Select an on-screen menu language.
Speaker (Manual Setup) Configures the speaker settings manually. ■ Setting Data Copy Copies the “Setting Pattern” parameters in the specified direction. Choices Pattern1 > 2 Copies the “Pattern1” parameters to “Pattern2”. Pattern2 > 1 Copies the “Pattern2” parameters to “Pattern1”. • Default settings are underlined. ■ Power Amp Assign Selects a speaker system. The unit has 9 built-in amplifiers.
7ch +FRONT+1ZONE 5ch +FRONT+2ZONE Select this when you use 7-channel speakers plus front channel expansion using an external amplifier in the main zone and Zone3 (or Zone2) speakers (p.29). You can select a zone to be assigned to the EXTRA SP 2 jacks (default: Zone3). Select this when you use 5-channel speakers plus front channel expansion using an external amplifier in the main zone, plus Zone2 and Zone3 speakers (p.29).
Small x1 Select this option when one small speaker is connected. The subwoofer or front speakers will produce surround back channel low-frequency components lower than the specified crossover frequency (default: 80 Hz). Small x2 Select this option when two small speakers are connected. The subwoofer or front speakers will produce surround back channel low-frequency components lower than the specified crossover frequency (default: 80 Hz).
Front Presence Selects a front presence layout when front presence speakers are used. This setting facilitates the optimization of the sound field effect. Settings Front Height Select this option when front presence speakers are installed on the front side wall. Overhead Select this option when front presence speakers are installed to the ceiling. ■ Distance Sets the distance between each speaker and listening position so that sounds from the speakers reach the listening position at the same time.
■ Manual equalizer adjustment 1 2 3 Set “Parametric EQ” to “Manual” and press ENTER. Press ENTER again to enter the edit screen. Use the cursor keys to select a speaker and press ENTER. • To restore the default settings for all speakers, select “PEQ Data Clear” and then “OK”. ■ Test Tone Enables/disables the test tone output. Test tone output helps you to adjust the speaker balance or equalizer while confirming its effect. Settings Off Does not output test tones.
Sound Adjustment Configures the audio output settings. Adjusts the delay between video and audio output manually when “Auto/Manual Select” is set to “Manual”. You can fine-adjust the audio output timing when “Auto/Manual Select” is set to “Auto”. ■ Lipsync Adjusts the delay between video and audio by holding up the audio output. Setting range 0 ms to 500 ms (1 ms increments) Delay Enable Enables/disables the Lipsync adjustment for each input source.
■ Initial Volume ■ Extended Surround Sets the initial volume when the receiver is turned on. Selects how to play back 5.1- to 7.1-channel sources when surround back speakers are used. Settings Off Sets the level to the volume level of the unit when it last entered standby mode. On Sets at Mute or the specified volume level (-80.0 dB to +16.5 dB, 0.5 dB increments). (Specify a volume level which is lower than the “Max Volume” setting.
Video Aspect Configures the video output settings. Selects an aspect ratio to output HDMI video signals when “Video Mode” is set to “Processing”. Settings Through Does not convert the aspect ratio. 16:9 Normal Outputs 4:3 video signals to a 16:9 TV with black bands on either side of the screen. • This setting functions only when 480i/576i or 480p/576p signals are converted into 720p, 1080i, 1080p, or 2160p (4K) signals.
Edge Enhancement HDMI Adjusts the enhancement effect of video edges. Setting range 0 to 50 Configures the HDMI settings. Brightness Adjusts the video brightness. Setting range -100 to 0 to +100 Contrast Adjusts the video contrast. Setting range -100 to 0 to +100 Saturation Adjusts the video saturation. ■ HDMI Control Enables/disables HDMI Control (p.168). Settings Setting range -100 to 0 to +100 Off Disables HDMI Control. On Enables HDMI Control.
ARC HDMI OUT1, HDMI OUT2 Enables/disables ARC (p.169) when “HDMI Control” is set to “On”. Enables/disables the audio output from a TV connected to the HDMI OUT 1 jack or HDMI OUT 2 jack. Settings Off Disables ARC. On Enables ARC. • You do not need to change this setting normally. In case noises are produced from the speakers connected to the unit because TV audio signals input to the unit via ARC are not supported by the unit, set “ARC” to “Off” and use the TV’s speakers.
■ Manual network settings Network Configures the network settings. ■ Network Connection Selects the network connection method. Settings Wired Select this option when you want to connect the unit to a network with a commercially-available network cable (p.43) Wireless (Wi-Fi) Select this option when you want to connect the unit to a network via the wireless router (access point). For details on settings, see “Connecting the unit to a wireless network” (p.60).
■ MAC Address Filter ■ Network Name Sets the MAC address filter to limit access to the unit from other network devices. Edits the network name (the unit’s name on the network) displayed on other network devices. Filter Enables/disables the MAC address filter. Settings Off Disables the MAC address filter. On Enables the MAC address filter. In “MAC Address 1–10”, specify the MAC addresses of the network devices that will be permitted access to the unit.
Multi Zone Configures the multi zone settings. ■ Zone2 Set, Zone3 Set Configures the Zone2 or Zone3 settings. Volume Enables/disables volume adjustments for Zone2 or Zone3 output. If you have connected an external amplifier with volume control to the unit, disable the volume adjustment for the corresponding zone. Settings Fixed Disables volume adjustments for Zone2 or Zone3 output. Variable Enables volume adjustments for Zone2 or Zone3 output. ■ Main Zone Set Configures the main zone setting.
Mono Zone Rename Switches between stereo and monaural for Zone2 or Zone3 output. Changes the zone name (for Zone2 or Zone3) displayed on the front display or TV screen. Settings Off Produces stereo sounds in Zone2 or Zone3. On Produces monaural sounds in Zone2 or Zone3. Zone Scene Rename Changes the scene names (for Zone2 or Zone3) displayed on the front display or TV screen. ■ Procedure 1 2 3 Use the cursor keys to select a scene to be renamed and press ENTER.
■ HDMI OUT2 Assign Select the zone for which the HDMI OUT 2 (ZONE OUT) jack is used. Function Configures the functions that make the unit easier to use. Settings Main, Zone2, Zone4 • For details on video/audio signals that can be output to each zone, see “Multi-zone output” (p.167). Audio Output Enables/disables the audio output from the HDMI OUT 2 jack when “HDMI OUT2 Assign” is set to “Zone2”. On Enables the audio output. Off Disables the audio output (video output only).
3 To exit from the menu, press ON SCREEN. ■ Trigger Output1, Trigger Output2 Sets the TRIGGER OUT 1–2 jacks to function in sync with the power status of each zone or input switching. • You cannot assign both COAXIAL and OPTICAL jacks to the same input source. Trigger Mode ■ Display Set Specifies the condition for the TRIGGER OUT jack to function. Configures the settings related to the front display and TV screen display.
Target Zone ■ Memory Guard Specifies the zone with which the TRIGGER OUT jack functions are synchronized. Prevents accidental changes to the settings. Settings Settings Main When “Trigger Mode” is set to “Power”, electronic signal transmission is synchronized with the power status of the main zone. When “Trigger Mode” is set to “Source”, electronic signal transmission is synchronized with the input switching in the main zone.
ECO ■ ECO Mode Configures the power supply settings. Enables/disables the eco (power saving) mode. When the eco mode is enabled, you can reduce the unit’s power consumption. Settings Off Disables the eco mode. On Enables the eco mode. • The new setting will take effect after the unit is restarted. • When “ECO Mode” is set to “On”, the front panel display may become dark. • If you want to play audio at high volume, set “ECO Mode” to “Off”.
Language Select an on-screen menu language. Viewing information about the unit (Information menu) You can view information about the unit using the TV screen. 1 2 Press ON SCREEN. 3 Use the cursor keys (e/r) to select an information type. 4 To exit from the menu, press ON SCREEN. Use the cursor keys to select “Information” and press ENTER.
■ Network Types of information Displays the network information on the unit. ■ Audio Signal (When using wired or wireless [Wi-Fi] network connection) Displays information about the current audio signal. Format Audio format of the input signal Channel The number of source channels in the input signal (front/surround/LFE) For example, “5.1 (3/2/0.1)” means 5.1ch in total (3 front channels, 2 surround channels, and LFE).
■ System Displays the system information on the unit. Remote ID The unit’s remote control ID setting (p.145) Configuring the system settings (ADVANCED SETUP menu) TV Format The unit’s video signal type (p.146) Configure the system settings of the unit while viewing the front display. Speaker Impedance The speaker impedance setting of the unit (p.145) Tuner Freq. Step (Asia and General models only) The FM/AM tuning frequency setting of the unit (p.
ADVANCED SETUP menu items Turning on/off the remote control sensor (REMOTE SENSOR) • Default settings are underlined. Item SP IMP. - Function DOCK TAG HD STEREO TUNED PRE AMP PARTY ZONE ZONE ZONE 3 4 IN OUT 1 OUT 2 2 ENHANCER SLEEP Page HD 3 SPEAKER IMP. Changes the speaker impedance setting. 145 REMOTE SENSOR Turns on/off of the remote control sensor on the main unit. 145 REMOTE CON AMP Selects the unit’s remote control ID.
Changing the FM/AM tuning frequency setting (TUNER FRQ STEP) (Asia and General models only) DOCK TAG HD STEREO TUNED PRE AMP PARTY ZONE ZONE ZONE 3 4 IN OUT 1 OUT 2 2 SLEEP HD 3 Removing the limitation on HDMI video output (MONITOR CHECK) SP IMP. - DOCK TAG HD STEREO TUNED PRE AMP PARTY ZONE ZONE ZONE 3 4 IN OUT 1 OUT 2 2 ENHANCER SLEEP TUNER FRQ STEP FM50/AM9 HD 3 Change the FM/AM tuning frequency setting of the unit depending on your country or region.
Backing up/recovering the settings (RECOV./BACKUP) SP IMP. - DOCK TAG HD STEREO TUNED PRE AMP PARTY ZONE ZONE ZONE 3 4 IN OUT 1 OUT 2 2 ENHANCER SLEEP HD 3 RECOV./BACKUP BACKUP SP IMP. - MUTE VOLUME ADAPTIVE DRC PL L C R PR SL SW1 SW SW2 SR PL SBL SB SBR PR Creates backup of the settings of the unit, or recovers the settings from the backup.
SOURCE Controlling external devices with the remote control You can use the unit’s remote control to operate external devices (such as BD/DVD players) if you have registered the remote control code of the external device. 3 4 Press TV z. Use the numeric keys to enter the 4-digit remote control code. • You cannot control an external device that does not have a remote control sensor. • Ensure that the remote control ID of the external device is set to “ID1”.
SOURCE z SOURCE RECEIVER Input selection keys Registering the remote control codes for playback devices You can use the unit’s remote control to operate playback devices if you have registered their remote control codes. You can also use the input selection keys to change the playback devices that are controlled by the remote control, because their remote control codes are assigned to the input selection keys.
Resetting remote control codes SOURCE RECEIVER Input selection keys You can reset a remote control code registered to each input selection key. 1 Press CODE SET. SOURCE blinks twice. Perform each of the following steps within 1 minute. Otherwise, the setting will be canceled. If this happens, repeat from Step 1. 2 3 Press the input selection key. Use the numeric keys to enter “5098”. Once the remote control code is reset successfully, SOURCE blinks twice. If it blinks six times, resetting has failed.
Updating the unit’s firmware via the network New firmware that provides additional features or product improvements will be released as needed. If the unit is connected to the Internet, you can download the firmware via the network and update it. 3 If “UPDATE SUCCESS PLEASE POWER OFF!” appears on the front display, press MAIN ZONE z on the front panel. The firmware update is complete. Note • Do not operate the unit or disconnect the power cable or network cable during firmware update.
APPENDIX Frequently asked questions The new speaker system does not provide an ideal sound balance... If you have changed speakers or have a new speaker system, use “Auto Setup” to optimize the speaker settings again (p.47). If you want to adjust the speaker settings manually, use “Manual Setup” in the “Setup” menu (p.124). Since we have small children, we want to set limitations on the volume control...
Troubleshooting Refer to the table below when the unit does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. First, check the following: a The power cables of the unit, TV and playback devices (such as BD/DVD players) are connected to AC wall outlets securely.
Problem The unit cannot be controlled using the remote control. Cause The unit is out of the operating range. Use the remote control within the operating range (p.5). The batteries are weak. Replace with new batteries. The unit’s remote control sensor is exposed to direct sunlight or strong lighting. Adjust the lighting angle, or reposition the unit. The remote control is set to control external devices. Press RECEIVER to set the remote control to control the unit (the key lights up in orange).
Audio Problem No sound. Cause Remedy Another input source is selected. Select an appropriate input source with the input selection keys. Signals that the unit cannot reproduce are being input. Some digital audio formats cannot be played back on the unit. To check the audio format of the input signal, use “Audio Signal” in the “Information” menu (p.143). The cable connecting the unit and playback device is defective. If there is no problem with the connection, replace with another cable.
Problem Cause Remedy The TV is set to output audio from the TV speakers. Change the audio output setting on your TV so that the TV audio is output from the speakers connected to the unit. A TV that does not support ARC is connected to the unit only with an HDMI cable. Use a digital optical cable to make an audio connection (p.35). (If the TV is connected to the unit with an audio cable) The TV audio input setting does not match the actual connection.
Video Problem No video. No video from the playback device (connected to the unit with HDMI). Cause Remedy Another input source is selected on the unit. Select an appropriate input source with the input selection keys. Another input source is selected on the TV. Switch the TV input to display the video from the unit. The video signal output from the unit is not supported by the TV. Set “MONITOR CHECK” in the “ADVANCED SETUP” menu to “YES” (p.146).
FM/AM radio Problem Cause There is multi-path interference. Remedy Adjust the FM antenna height or orientation, or place it in a different location. (U.S.A. model only) Set “Audio Mode” in the “Option” menu to “Mono” to select monaural FM radio reception (p.111). FM radio reception is weak or noisy. Your area is too far from the FM station transmitter. (Except for U.S.A. model) Set “FM Mode” in the “Option” menu to “Mono” to select monaural FM radio reception (p.111). Use an outdoor FM antenna.
USB and network Problem Cause Remedy The USB device is not connected to the USB jack securely. Turn off the unit, reconnect your USB device, and turn the unit on again. The file system of the USB device is not FAT16 or FAT32. Use a USB device with FAT16 or FAT32 format. Folders and files in the USB device cannot be viewed. The data in the USB device is protected by the encryption. Use a USB device without an encryption function. The files in the USB device cannot be played back continuously.
Problem The Internet radio cannot be played. The iPod does not recognize the unit when using AirPlay. Cause Remedy The selected Internet radio station is currently not available. There may be a network problem at the radio station, or the service may have been stopped. Try the station later or select another station. The selected Internet radio station is currently broadcasting silence. Some Internet radio stations broadcast silence at certain of times of the day.
Error indications on the front display Message Cause Remedy Access denied Access to the PC is denied. Configure the sharing settings and select the unit as a device to which music contents are shared (p.89). Access error The unit cannot access the USB device. Turn off the unit and reconnect your USB device. If the problem persists, try another USB device. The unit cannot access the iPod. Turn off the iPod and turn it on again. The connected iPod is not supported by the unit.
Glossary Audio information ■ Audio decoding format Dolby Digital Dolby Digital is a compressed digital audio format developed by Dolby Laboratories, Inc. that supports 5.1-channel audio. This technology is used for audio on most DVD discs. Dolby Digital EX Dolby Digital EX creates total 6.1-channel audio from 5.1-channel sources that are recorded with Dolby Digital Surround EX. This decoder adds a surround back sound to the original 5.1-channel sound.
Sampling frequency/Quantization bit Sampling frequency and quantization bits indicate the quantity of information when an analog audio signal is digitized. These values are noted as in the following example: “48 kHz/24-bit”. • Sampling frequency Sampling frequency (the number of times the signal is sampled per second) is called the sampling rate. When the sampling frequency is higher, the range of frequencies that can be played back are wider.
Network information Yamaha technologies SSID CINEMA DSP (Digital Sound Field Processor) SSID (Service Set Identifier) is a name that identifies a particular wireless LAN access point. Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is best experienced in a theater that has many speakers designed for acoustic effects.
Supported devices and file formats ■ Supported devices About HTC Connect This receiver features “HTC Connect”, a simple way to enjoy all music content from your HTC Connect certified smartphone. ❑ USB devices 1. HTC Connect music streaming provided on this product has been developed based on interoperability testing as defined by the HTC Connect program with the HTC Connect compatible smartphones. • This unit supports USB mass storage class devices (e.g.
Video signal flow Video signals input from a video device to the unit are output to a TV as shown below. ■ Video conversion table • You can select the resolution and the aspect ratio applied to HDMI-output video processing in “Video Mode” (p.131) in the “Setup” menu. • The unit does not convert 480-line and 576-line video signals interchangeably.
Multi-zone output ■ Audio output ■ Video output Using the unit's internal amplifier (p.32) Out In Digital audio (HDMI) Digital audio (COAXIAL/OPTICAL) EXTRA SP 1–2 jacks Zone2 Zone3 m (*3) Using an external amplifier (p.
(Example) Information on HDMI HDMI Control HDMI Control HDMI Control HDMI Control allows you to operate external devices via HDMI. If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit (such as power and volume) with TV remote control operations. You can also control playback devices (such as HDMI Control-compatible BD/DVD players) connected to the unit with an HDMI cable. For details on connections, see “Connecting a TV” (p.
d Use the cursor keys (e/r) to select “HDMI”. Audio Return Channel (ARC) ARC allows you to input TV audio to the unit with the HDMI cable which transmits video signal to the TV. Check the following after the HDMI Control settings. 1 2 e Use the cursor keys (q/w) to select “HDMI Control” and press ENTER. f Use the cursor keys to select “On”. g Press ON SCREEN. 3 Enable HDMI Control on the TV and playback devices (such as HDMI Control-compatible BD/DVD players).
HDMI signal compatibility Audio signals Audio signal type Audio signal format Compatible media (example) 2ch Linear PCM 2ch, 32 to 192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio Multichannel Linear PCM 8ch, 32 to 192 kHz, 16/20/24 bit DVD-Audio, BD (Blu-ray disc), HD DVD DSD 2 to 5.1ch, 2.
Reference diagram (rear panel) DC OUT 5V 0.5A HDMI HDMI OUT 2 1 (ZONE OUT) AV 1 AV 2 AV 3 NETWORK AV 4 AV 5 AV 6 WIRELESS (3 NET ) AV 7 (1 BD/DVD) ARC AC IN PHONO AV 1 AV 2 AV 3 AV 4 (1 BD/DVD) AV OUT MONITOR OUT/ ZONE OUT Y COMPONENT VIDEO PR PB Y AV 2 PB TRIGGER OUT PR B 1 RS-232C REMOTE IN GND 1 OUT 1 IN OUT 2 AUDIO 1 (2 TV) L A Y PB AV 1 AUDIO 2 AUDIO 3 C PR Y AUDIO 4 AV 3 PB PR MULTI CH INPUT 12V 0.1AMAX.
Trademarks Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, Surround EX and the double-D symbol are trademarks of Dolby Laboratories. MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. DLNA™ and DLNA CERTIFIED™ are trademarks or registered trademarks of Digital Living Network Alliance. All rights reserved. Unauthorized use is strictly prohibited. Windows™ Manufactured under license under U.S.
Specifications Input jacks • Analog Audio [RX-A2040] - 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz - Pre Out x 7 (FRONT L/R, CENTER, SURROUND L/R, - 4K/60 Hz, 50Hz, 30 Hz, 25 Hz, 24 Hz SURROUND BACK L/R) Audio x 10 (AV 1–4, AUDIO 1–4, PHONO, V-AUX) - ZONE OUT x 2 (ZONE2/ZONE3) MULTI CH INPUT x 1 (8 ch) • Digital Audio (FRONT L/R, CENTER, SURROUND L/R, Optical x 1 (AV OUT) SURROUND BACK L/R, SUBWOOFER) • Video • Digital Audio (Supported frequencies: 32 kHz to 96 kHz) • Audio Format - Dolby TrueHD
USB Audio Section • Capable of iPod, Mass Storage Class USB Memory • Rated Output Power (2-channel driven) • Current Supply Capacity: 2.1 A [RX-A3040] (20 Hz to 20 kHz, 0.06% THD, 8 ) Network Front L/R .......................................................... 150 W+150 W • PC Client Function Center...........................................................................150 W • Compatible with DLNA ver. 1.5 Surround L/R ...................................................
• Damping Factor Front L/R, 1 kHz, 8 ............................................. 150 or more • Input Sensitivity / Input Impedance • Tone Control Characteristics Main Zone Bass Boost/Cut......................... ±6.0 dB/50 Hz (0.5 dB Step) • 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.) Mono ................................................................. 3 µV (20.8 dBf) • Signal to Noise Ratio (IHF) PHONO (1 kHz, 100 W/8 ) ................................3.5 mV/47 k Bass Turnover..............
• Maximum Power Consumption [Asia and General models]........................................... 1210 W • Dimensions (W x H x D) ...................... 435 x 192 x 467 mm (17-1/8” x 7-1/2” x 18-3/8”) * Including legs and protrusions • Reference Dimensions (W x H x D) (with wireless antenna) ...................... 435 x 252 x 474 mm (17-1/8” x 9-7/8” x 18-5/8”) • Weight [RX-A3040] [China, U.K. and Europe models] ............. 19.6 kg (43.2 lbs) [Other models]........................................... 18.
Index Symbols Exclamation mark (!) Lock icon (o) 140 144, 151 9ch +RP (Power Amp Assign, Setup menu) 9ch +RP (speaker configuration) 27 9ch Stereo (sound program) 73 124 Numerics A 16:9 Normal (Aspect, Setup menu) 131 2.1-channel system 21 2ch Stereo (sound program) 73 3.1-channel system 21 4K Ultra HD 170 5.1-channel system 21 5ch +FRONT+2ZONE (Power Amp Assign, Setup menu) 125 5ch +FRONT+2ZONE (speaker configuration) 29 7.
CLASSICAL (sound program subcategory) 72 Clear Preset (FM/AM radio) 82 Clear Preset (HD Radio™) 80 Clock Time (Radio Data System) 80 Compressed Music Enhancer 75 Configuration (Speaker, Setup menu) 125 Contrast (Video Mode, Setup menu) 132 Crossover frequency setting (subwoofer) 47 D DC OUT (Function, Setup menu) 140 Decode Type (Sound Program menu) 117 Decoder Mode (Input menu) 113 Decoder Off (front display information) 106 Default Gateway (IP Address, Setup menu) 134 Default Gateway (Network, Informatio
I In.
Power Amp Assign (Speaker, Setup menu) 124 Power management 141 Power Mode (DC OUT, Setup menu) 140 Preset station selection (FM/AM radio) 77 Program Service (Radio Data System) 80 Program Type (Radio Data System) 80 Pure Direct 75 PURE DIRECT (sound mode) 75 Pure Direct Mode (Sound, Setup menu) 130 Reset (remote control) 150 Reset (Scene menu) 116 Resolution (Video Mode, Setup menu) 131 Reverb Delay (Sound Program menu) 118 Reverb Level (Sound Program menu) 118 Reverb Time (Sound Program menu) 118 Reverse
SW.
© 2014 Yamaha Corporation YG260B0/EN
English Français UCAB 4 TV HDMI output Téléviseur Sortie HDMI RX-A3040/RX-A2040 5 BD/DVD player Lecteur BD/DVD AV Receiver/Ampli-tuner audio-vidéo Router Câble de réseau Internet Routeur Network cable Connecting external devices © 2014 Yamaha Corporation Printed in Malaysia ZK67870 Easy Setup Guide/Manuel de configuration rapide Internet English HDMI LAN HDMI output Sortie HDMI This document explains basic connections and unit settings.
8 z (receiver power) key The unit L’unité YPAO MIC YPAO MIC jack Prise YPAO MIC 1 Touche (alimentation du récepteur Ampli-tuner) 2 SOURCE 9 RECEIVER AV 1 2 3 4 5 6 7 V-AUX AV 1 AUDIO 1 2 3 4 PHONO MULTI USB NET PARTY HDMI OUT TUNER MAIN 2 3 4 ZONE 3 Press the bottom of the front panel door gently to open the door. SCENE 9 Ear height Pour ouvrir le clapet de la face avant, appuyez doucement au bas du clapet.
Supplement for Web Control Controlling the unit from a web browser (web control) You can control the unit with the web control screen displayed in a web browser. Web browser Note • If you are using a DHCP server, the IP address of the unit may change each time the unit is turned on. • If you have enabled the MAC address filter, you need to specify the MAC address of your PC to allow the PC to access the unit. For information on how to check the MAC address of your PC, refer to its instruction manual.
■ Top menu screen ■ Control screen 3 1 5 1 6 2 3 4 Moves to the control screen for the selected zone. 2 STATUS Turns on/off the power for each zone or displays the input source and volume set for each zone. 3 SETTINGS Moves to the settings screen. 4 PARTY MODE (Not available on some models) Turns on/off the party mode. 5 SYSTEM POWER Turns on/off the power for all zones. 6 MAIN VOLUME Adjusts the volume or mutes the audio output for the main zone.
■ Settings screen Note • When using the MAC address filter, make sure you specify the MAC addresses of your network devices correctly. Otherwise, the unit will be inaccessible from your network devices such as PCs and other external devices. • Do not operate the unit during the recovery process, as this may result in the incorrect recovery of the settings. When the recovery finishes, click “OK” to set the unit to standby mode.
RX-A3040/RX-A2040 Quick Guide for Multi-zone and Remote Control Functions U Multi-zone function What is the multi-zone function? Preparations The multi-zone function allows you to play back different input sources in the room where the unit is installed (main zone) and in other rooms (Zone2, Zone3 and Zone4).
■ Connections 2 Caution • Before connecting the speakers, remove the unit’s power cable from the AC wall outlet. Connect the playback devices (such as CD players) in the main zone to the analog stereo input jacks with stereo pin cables (RCA stereo cables). Skip this step if you do not use Zone2. • Ensure that the core wires of the speaker cable do not touch each other or come into contact with the unit’s metal areas. This may damage the unit or the speakers.
SOURCE ■ Zone2/Zone4 setup RECEIVER Use the supplied remote control to set the Zone2/Zone4 function. AV 1 2 3 4 5 6 7 V-AUX 1 2 3 4 PHONO MULTI USB NET PARTY HDMI OUT AUDIO TUNER MAIN 2 3 4 ZONE 1 2 3 Turn on the unit and TV in the main zone. 4 Use the cursor keys to select “Setup” and press ENTER. SCENE 1 2 3 MUTE PROGRAM TOP MENU POP-UP/MENU ON SCREEN OPTION ENTER RETURN Press ON SCREEN to display the on-screen menu on the TV.
SOURCE RECEIVER RECEIVER z Controlling Zone2 or Zone4 4 AV 1 2 3 4 5 6 7 V-AUX 1 2 3 4 PHONO MULTI USB NET PARTY HDMI OUT ■ Controlling Zone2 AUDIO Input selection keys Follow the procedure below to enable Zone2 output and select an input source for Zone2. TUNER MAIN 2 3 4 ZONE ZONE SCENE 1 2 3 4 1 2 Set the ZONE switch to “2”. Press RECEIVER z. Each time you press the key, Zone2 is enabled or disabled.
SOURCE RECEIVER RECEIVER z AV 1 2 3 4 5 6 7 V-AUX AV 1-7 V-AUX AUDIO 1 2 3 4 PHONO MULTI USB NET PARTY HDMI OUT TUNER MAIN 2 3 4 ■ Controlling Zone4 Follow the procedure below to enable Zone4 output and select an input source for Zone4. 1 2 SCENE 1 2 3 MUTE PROGRAM TOP MENU When Zone4 is enabled, “ZONE4” lights up in the front display. 4 VOLUME SP IMP.
SOURCE SOURCE RECEIVER Controlling your TV with the remote control of the unit AV 1 2 3 4 5 6 7 V-AUX By registering the remote control code for your TV, you can operate it with the remote control of the unit. For information on how to register remote control codes for other external devices, refer to the Owner’s Manual in the supplied CD-ROM.
List of TV’s remote control codes Elite Hitachi 0320, 0340, 0350 0008.
© 2014 Yamaha Corporation Printed in Malaysia ZK68040
Supplement for SiriusXM Internet Radio UC Listening to SiriusXM Internet Radio • The SiriusXM Internet Radio service is available in the U.S.A. and Canada. (Service not available in Alaska and Hawaii) 1 • Categories and channels displayed in the screen may vary depending on the region. Press NET repeatedly to select “SiriusXM” as the input source. 5 Use the cursor keys and ENTER to enter your user name and select “OK”.
Playback of SiriusXM Internet Radio contents Follow the procedure below to operate the SiriusXM Internet Radio contents and start playback. 1 ■ Browse screen 1 2 3 1 2 5 Press NET repeatedly to select “SiriusXM” as the input source. The browse screen is displayed on the TV. ■ Playback screen 1 Playback indicator 1 Playback indicator 2 List name 2 Playback information Displays the SiriusXM Internet Radio contents. Use the cursor keys (q/w) to select an item and press ENTER to confirm the selection.
■ Switching information on the front display Removing the SiriusXM Internet Radio account 1 Follow the procedure below to remove your SiriusXM Internet Radio account from the unit. Press INFO. Each time you press the key, the displayed item changes. Display items Song (song title), Artist (artist name), Channel (channel name), DSP Program (sound mode name), Audio Decoder (decoder name) 1 2 Press ON SCREEN. 3 Use the cursor keys (e/r) to select “SiriusXM Internet Radio” and press the cursor key (q).
© 2012 Yamaha Corporation Printed in Malaysia ZF22900
Supplement for Rhapsody Using the Rhapsody® service The Rhapsody® service is available in the U.S.A. only. Le service Rhapsody® est disponible aux États-Unis uniquement. Prohibition • It is strictly prohibited to modify, reproduce, reverse-engineer or use this unit and/or built-in software for use other than audiovisual purposes. Rhapsody® account sign-in 5 If you have not signed in to your Rhapsody account yet, the sign-in screen appears when you select “Rhapsody”.
Playback of Rhapsody® contents Follow the procedure below to operate the Rhapsody contents and start playback. 1 2 Use the cursor keys to select an item and press ENTER. Menu If a song or a radio channel is selected, playback starts and the playback screen is displayed. Press NET repeatedly to select “Rhapsody” as the input source. Submenu Function Play Starts playback of the selected song/ album or radio channel. Add track to My Library Adds the song selected in the list to “My Library”.
■ Playback screen Removing the Rhapsody account • You can also use the external device operation keys (a, s, d, f, g) on the remote control to control playback. 1 2 • Some playback controls are not available during Rhapsody radio channel playback. 3 4 ■ Shuffle/repeat settings You can configure the shuffle/repeat settings for playback of Rhapsody contents. 1 Status indicators Display the current shuffle/repeat settings and playback status (play/pause).
© 2013 Yamaha Corporation YF236A0/NS2EN
Supplement for Pandora® Using the Pandora service The Pandora service is available in the U.S.A., Australia and New Zealand only. 1 Le service Pandora est disponible aux États-Unis, en Australie et en Nouvelle-Zélande uniquement. Pandora is a free, personalized Internet radio service playing only music you love. Enter your favorite artists or tracks and Pandora will bring an effortless personal soundtrack into your living room.
If you select “NO” in Step 4 a Write down the URL and active code shown in the TV. http://xxxx.xxxxxxxxxx.xxx:xxxx/xxxxxx XXXXXXXX • If playback of any Pandora station is ongoing, the playback screen is displayed. Press RETURN to display the browse screen. 2 Use the cursor keys to select “Utility” and press ENTER. b Use a web browser on your PC to access the URL and follow the on-screen instruction to register for a Pandora account.
Playback of Pandora stations If you have created Pandora stations, follow the procedure below to select a Pandora station to be played. 1 ■ Browse screen 1 2 4 ■ Playback screen 5 Press NET repeatedly to select “Pandora” as the input source. The browse screen (My Station list) is displayed on the TV. • Submenus available in “Utility” vary depending on the selected item. 3 1 2 4 3 5 1 Playback indicators (play/pause) 2 My Station list Displays the list of Pandora stations.
Menu Utility Play Control Submenu Function Bookmark this track Adds the current track to your bookmarks on your Pandora profile page at “http://www.pandora.com”. Tired of this track Requests not to play back the current track for a month and skip to the next track. Why this track? Display the information why this track is selected. a Resumes playback from pause. s Stops playback. d Stops playback temporarily. g Skips forward. Browse Moves to the browse screen (My Station list).
Supplement for Spotify Using the Spotify service English Spotify gives you instant access to millions of songs on your mobile devices. Just hit play to stream anything you like. The Spotify Connect feature lets you choose music on your Spotify app and listen on your Yamaha home entertainment system. See Spotify.com for service area information. 1. Connect your device to your home Wi-Fi network. 2. Get Spotify app and premium free trial. 3.
Information about third party software licenses This product incorporates the following third party software. For information (copyright, etc) about each software, please read the terms and conditions stated below. By using this product, you will be deemed to have accepted the terms and conditions. Boost http://www.boost.org/ Boost Software License - Version 1.
5. Restrictions. The license granted in Section 3 above is expressly made subject to and limited by the following restrictions: a. You agree not to remove any of the original copyright, patent, trademark, and attribution notices and associated disclaimers that may appear in the Source Code or Executable Files. b. You agree not to advertise or in any way imply that this Work is a product of Your own. c.
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. libvorbis - Neither the name of the Xiph.
Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions: The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. 1.
© 2014 Yamaha Corporation Printed in Malaysia ZK13590
List of remote control codes Liste des codes de commande Liste der Fernbedienungscodes Lista över fjärrstyrningskoder Elenco dei codici di telecomando Lista de códigos de mando a distancia TV A.R.
Crown 0058, 0161, 0171, 0179, 0320, 0323, 0343, 0349, 0350, 0351 CS Electronics 0277, 0340, 0342 CTC Clatronic 0341 CTX 0205 Curtis Mathes 0007, 0008, 0010, 0019, 0021, 0026, 0049, 0050, 0178 CXC 0058, 0179 Cybertron 0340 Cytron 0152 Daewoo 0007, 0008, 0026, 0037, 0053, 0167, 0266, 0275, 0277, 0282, 0315, 0320, 0323, 0331, 0335, 0342, 0343, 0350, 0381, 0465 Dainichi 0277, 0340 Dansai 0277, 0282, 0320, 0337, 0349, 0350 Dantax 0161, 0349 Dawa 0320 Daytron 0007, 0008, 0026, 0323, 0343 De Graaf 0346 Decca 0282
Indiana Infinity InFocus Ingelen Ingersol Initial Inno Hit Innovation Insignia Inteq Interactive Interbuy Interfunk International Intervision Irradio Isukai ITC ITS ITT ITV Janeil JBL JC Penney JCB Jensen JVC Kaisui Kamosonic Kamp Kapsch Karcher Kawasho KEC Kendo Kenwood KIC 0320, 0349, 0350 0010 0250, 0327, 0363, 0479, 0508 0347 0323, 0343 0153 0171, 0282, 0320, 0323, 0340, 0342, 0343, 0349, 0350 0337, 0343 0131, 0228, 0236, 0238 0030 0161 0323, 0343 0161, 0320, 0339, 0347, 0349, 0350 0277 0161, 0282, 03
Orion 0043, 0146, 0283, 0320, 0323, 0328, 0343, 0349, 0350 Orline 0320 Osaki 0282, 0320, 0337, 0340, 0342 Oso 0340 Otto Versand 0282, 0320, 0336, 0342, 0344, 0348, 0349, 0350 Pael 0277, 0342 Palladium 0161, 0282, 0320, 0342, 0351 Palsonic 0282 Panama 0277, 0282, 0320, 0323, 0337, 0342, 0343 Panasonic 0016, 0017, 0020, 0022, 0023, 0035, 0052, 0056, 0084, 0085, 0133, 0163, 0193, 0284, 0286, 0290, 0292, 0320, 0325, 0347, 0356, 0483, 0485, 0490 Panavision 0320 Pathe Cinema 0161, 0168, 0277, 0321, 0342 Pausa 03
Sony 0038, 0044, 0045, 0047, 0055, 0090, 0104, 0105, 0107, 0110, 0123, 0184, 0220, 0248, 0249, 0251, 0252, 0254, 0326, 0343, 0344, 0371, 0374, 0457, 0475, 0486 Sound & Vision 0340, 0341 Soundesign 0008, 0026, 0031, 0058, 0059, 0179 Soundwave 0320, 0349, 0350 Squareview 0051 SSS 0008, 0058, 0179 Standard 0282, 0320, 0323, 0340, 0342, 0343, 0350 Starlite 0058, 0179, 0320, 0323, 0349 Stenway 0348 Stern 0346, 0347 Strato 0320, 0323 Stylandia 0282 Sunkai 0343 Sunstar 0320, 0323 Sunwood 0320, 0323, 0343, 0350 Su
Broksonic Bush 1100 1008, 1009, 1024, 1025, 1029, 1049, 1051, 1063, 1217 Calix 1071 Candle 1070, 1071 Canon 1068 Cathay 1009 Catron 1030 CGE 1026, 1027 Cimline 1008, 1024, 1029 CineVision 1104 Citizen 1070, 1071 Clatronic 1008, 1030 Colortyme 1064 Condor 1009, 1025, 1030 Craig 1070, 1071 Crown 1008, 1009, 1025, 1029, 1030 Curtis Mathes 1064, 1068, 1070 Cybernex 1070 CyberPower 1016 Daewoo 1009, 1025, 1030, 1038, 1069, 1223 Dansai 1008, 1009, 1029 Dantax 1024 Daytron 1009, 1025 DBX 1064 De Graaf 1028 Decca
Otto Versand Palladium Panasonic 1028 1008, 1027, 1029, 1031 1000, 1022, 1044, 1055, 1068, 1072, 1085, 1090, 1091, 1120, 1121, 1214 Pathe Marconi 1027 Perdio 1026 Philco 1008, 1068 Philips 1006, 1013, 1028, 1035, 1040, 1045, 1046, 1050, 1058, 1059, 1061, 1068, 1076, 1101, 1110, 1113, 1116, 1117, 1122, 1126, 1210, 1211 Philips Magnavox 1076 Phonola 1028 Pilot 1071 Pioneer 1028, 1036 Polaroid 1088, 1099 Portland 1009, 1025, 1030 Prinz 1026 Profex 1029 Proline 1026 Proscan 1019 Prosonic 1009, 1024 Pulsar 1114
Boghe Brainwave Brandt Broksonic Bush 2382 2362 2148, 2188 2145, 2146 2064, 2110, 2170, 2268, 2290, 2346, 2358, 2367, 2383 California Audio Labs 2151 Cambridge Audio 2354 CAT 2352, 2353 CAVS 2192 Centrum 2353 CGV 2354, 2362 Changhong 2140 Cinetec 2363 CineVision 2133, 2237 Clatronic 2358, 2367 Coby 2031, 2046, 2360 Conia 2383 Continental Edison 2363 Crown 2362 C-Tech 2355 Curtis Mathes 2139 CVG 2377 CyberHome 2022, 2098, 2138, 2187, 2336 Cytron 2244 Daenyx 2363 Daewoo 2001, 2133, 2276, 2298, 2330, 2362, 23
Philips Phonotrend Pioneer Pointer Polaroid Portland Powerpoint Prima Proceed Proscan Prosonic Protron Provision Pye Qwestar Raite RCA RedStar Regent Reoc Rimax Rio Roadstar Ronin Rotel Rowa Rownsonic Saba Sabaki Saivod Sampo 2008, 2012, 2025, 2044, 2050, 2051, 2053, 2060, 2072, 2108, 2111, 2147, 2159, 2163, 2169, 2174, 2181, 2185, 2230, 2261, 2266, 2267, 2286, 2287, 2289, 2295, 2300, 2302, 2317, 2328, 2338, 2342, 2350, 2467 2367 2016, 2017, 2018, 2019, 2035, 2092, 2094, 2095, 2109, 2157, 2180, 2190, 221
DVD Recorder Aspire Astar Broksonic Go Video Hitachi Insignia Irradio JVC LG Liteon Panasonic Philips Pioneer Pye Samsung Sansui Sanyo Sony Sylvania Toshiba Yamaha 2222 2240 2146 2213 2062 2002 2053 2100, 2101, 2106, 2107 2033, 2057, 2223, 2238 2043 2011, 2034, 2058, 2062, 2116, 2117, 2119, 2120, 2121, 2123 2008, 2044, 2050, 2051, 2147 2017, 2035 2144 2000, 2112, 2216 2073 2217 2004, 2005, 2007, 2052, 2068, 2069, 2074, 2208, 2210, 2211 2239 2032, 2036, 2037, 2039, 2049, 2054, 2055, 2076 2056 Cable ABC ADB
Allsat Allsonic Alltech Alpha Alpha Digital Alphastar Amitronica Amstrad Anglo Ankaro Anttron Apollo Armstrong Artec Asat ASLF Astacom Astra 4048, 4053, 4055 4005, 4008, 4024 4217 4053 4104 4077 4217 4011, 4035, 4217, 4218 4217 4005, 4008, 4024, 4217 4001, 4004 4001 4011, 4053 4100 4053, 4055 4217 4216 4009, 4011, 4054, 4217, 4219 Astro 4004, 4008, 4010, 4015, 4024, 4213, 4218, 4219 AudioTon 4004, 4048 Aurora 4222, 4246 Austar 4222, 4246 Axiel 4216 Axis 4008, 4009, 4024, 4050 BBK 4205 Best 4008, 4024 Blaup
Lexus LG Lifesat Lifetec Lorenzen Lorraine Lupus Luxor Lyonnaise Macab Magnavox Manata Manhattan Marantz Mascom Maspro Matsui Max Mediabox Mediamarkt Mediasat Medion Medison Mega Memorex Metronic 4053 4049, 4103, 4107 4008, 4024, 4212, 4217 4008 4219 4049 4008, 4024 4218 4052 4052 4127, 4101 4031, 4216, 4217 4006, 4010, 4048, 4216 4055 4010 4006, 4217 4216 4219 4213 4011 4009, 4213, 4218 4008, 4024, 4217 4217 4053, 4055 4127 4001, 4004, 4005, 4010, 4028, 4031, 4217 Metz 4015 Micro electronic 4217, 4218, 42
Thomson Thorens Thorn Tivax Tivo Tokai Tonna Toshiba Triad Triasat Triax Turnsat Tvonics Twinner UEC Uher UltimateTV Uniden Unisat Unitor Universum US Digital Variosat Vega Ventana Viewsat Visiosat Voom Vortec Welltech WeTeKom Wevasat Wewa Winersat Wisi Woorisat Worldsat Xrypton XSat Zehnder Zenith Zodiac 4006, 4020, 4052, 4058, 4208, 4213, 4215, 4216, 4217, 4219 4051 4006 4104 4196 4053 4006, 4012, 4048, 4217, 4218 4194, 4202, 4203 4049 4218 4015, 4215, 4217, 4218 4217 4214 4031, 4217 4204, 4222, 4246 421
UCAB RX-A3040/RX-A2040/RX-V3077/RX-V2077 Additional information: About Dolby Atmos® English Dolby’s newest surround technology “Dolby Atmos” is now supported. ❑ Presence speaker layout By playing back Dolby Atmos contents, you can enjoy realistic sound from any direction including from overhead, bringing astounding clarity and power to home theaters, and providing a detailed and deep experience that's just like real life.
Dolby Enabled SP Select this option when using the Dolby Enabled speakers as the presence speakers. 3 It utilizes sounds reflected from ceiling and lets you enjoy overhead sounds only from speakers that are placed at the same level as traditional speakers. Front presence Select “Layout” and check that “Surround” is set to “Rear”. • Virtual CINEMA FRONT does not support playback of Dolby Atmos contents. 4 Rear presence Select the presence speaker layout in “Front Presence”.
Additional menu items Notes on installation of ceiling speakers The following menu items related to Dolby Atmos feature is newly added. Page numbers in parentheses denote reference pages in Owner’s Manual (the first number for RX-A3040/RX-A2040 and the second for RX-V3077/RX-V2077). When installing presence speakers to a ceiling, use the following illustration as a reference. When using two presence speakers • Dolby Surround decoder (bSurround) is added and selectable by pressing SUR.
Glossary Trademarks Dolby Atmos Introduced first in the cinema, Dolby Atmos brings a revolutionary sense of dimension and immersion to the Home Theater experience. Dolby Atmos is an adaptable and scalable object based format that reproduces audio as independent sounds (or objects) that can be accurately positioned and move dynamically throughout the 3 dimensional listening space during playback. A key ingredient of Dolby Atmos is the introduction of a height plane of sound above the listener.
Informations complémentaires: à propos de Dolby Atmos® Nous sommes heureux d’annoncer que « Dolby Atmos », la toute dernière technologie surround de Dolby, est maintenant prise en charge. La lecture de contenus Dolby Atmos produit un son époustouflant de réalisme, une immersion sonore totale grâce à la projection multidirectionnelle du son - aussi depuis le plafond.
Dolby Enabled SP Sélectionnez cette option lorsque vous utilisez des enceintes de présence de type Dolby Enabled. 3 Utilisant des enceintes placées à une hauteur conventionnelle, cette option exploite la réflexion des sons sur le plafond pour produire un champ sonore réaliste au-dessus de la position d’écoute. Présence avant Sélectionnez « Disposition » et vérifiez que « Surround » est réglé sur « Arrière ». • Le mode Virtual CINEMA FRONT ne permet pas la lecture de contenus Dolby Atmos.
Éléments du menu supplémentaires Remarques sur le montage d’enceintes au plafond Les éléments suivants liés à la fonction Dolby Atmos on été greffés au menu. Les numéros de page entre parenthèses font référence au mode d’emploi (le premier numéro correspond au modèle RX-A3040/RX-A2040 et le second au RX-V3077/RX-V2077). Si vous installez des enceintes au plafond, servez-vous des illustrations ci-dessous comme référence pour le montage.
Glossaire Marques commerciales Dolby Atmos Après son entrée fracassante dans les salles de cinéma, Dolby Atmos propose le même degré époustouflant de réalisme et d’immersion sonores aux installations Home Theater. Dolby Atmos est un format adaptable et modulaire, basé sur objets et capable de reproduire un support audio sous forme de sons (ou objets) indépendants. Ces sons peuvent être positionnés avec précision et se déplacent de façon dynamique dans l’espace d’écoute tridimensionnel durant la lecture.
FIRMWARE UPDATING PROCEDURE IMPORTANT NOTICE Do not attempt to update your Yamaha receiver using any other data file except those provided directly from the Yamaha website or through your network connection. Follow the instructions carefully and do not attempt any other procedures not specified in the instructions provided by Yamaha. Improperly updated products may cause improper operation, and any parts or service required to restore proper operation will not be covered under the Yamaha Limited Warranty.
Firmware Update Through the Internet Requirement: Internet connection Your receiver is connected to the Internet if you can receive Internet radio stations. (See owner’s manual for details) 1 Power off the receiver (Standby mode) 2 Enter the ADVANCED SETUP mode While pressing the STRAIGHT key, press the MAIN ZONE key and keep STRAIGHT key pressed until “ ADVANCED SETUP ” appears on the front panel display. * “ ADVANCED SETUP ” is displayed only for a few seconds. 3 Select “FIRM UPDATE” from the menu a.
5 Select “FIRM UPDATE” from the menu a. Power on the AV receiver and press the ON SCREEN key on the remote control. b. Select “Information” > “System”. c. Confirm that the firmware version is updated to the latest version. ON SCREEN key Congratulations! You have completed the firmware update. Your AV receiver is ready for normal use.
Firmware Update by USB Requirement: USB thumb drive, with enough free space to store over 25MB. (File system with FAT16 or FAT32 format) Firmware file provided by YAMAHA, “R03xx-xxxx.bin”. 1 Prepare USB thumb drive for the update Download the firmware, unzip and copy “R03xx-xxxx.bin” into the root directory of the USB thumb drive. Drag & Drop the file into USB thumb drive. R03xx-xxxx.
6 Start firmware update a. Press INFO (WPS) key to start the update. (Update process may take up to 10 minutes) * If “ UPDATE SUCCESS ” appears, this means your receiver is already up-to-date. In this case, power off to exit from Advanced Setup. Your AV receiver is ready for normal use. Firmware update in progress Caution DO NOT interrupt power during the update.
Troubleshooting CASE 1 Error message appeared during the update Cause: Method: For some reason, the receiver can’t read the firmware data. For your solution, check the following [Update through Internet] ❏Check Internet connection. Your Internet connection is working by playing an Internet radio station. (See owner’s manual for details) [Update by USB thumb drive] ❏USB thumb drive is connected properly to the receiver. ❏USB thumb drive is not password protected.
RX-A3040I RX-A2040
eYAMAHA Register Your New Yamaha Product Thank you for purchasing a new product from Yamaha Electronics. We would like to continue providing you with high quality products and better service. Please take a few minutes to visit our website and compl~te the product registration process at www.yamaha.com/YEC/registration/ Yamaha is committed to doing it's part in protecting the environment and reducing the impact on our natural resources.
OYAMAHA For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de details sur les produits, contactez votre representant Yamaha le plus proche de chez vous ou le distributeur agree indique ci-dessous. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Tronto ON M1S 3R1, Canada U.S.A. Yamaha Corporation of America 6600 Orangethorpe Ave., Buena Park, Calif. 90620, U.S.A.
MIDDLE EAST TURKEY/CYPRUS Yamaha Music Europe GmbH Siemensstrasse 22-34, 25462 Rellingen, Germany ASIA THE PEOPLE'S REPUBLIC OF CHINA Yamaha Music & Electronics (China) Co.,Ltd. 2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu, Shanghai, China OTHER COUNTRIES Yamaha Music Gulf FZE LOB 16-513, P.O.Box 17328, Jubel Ali, Dubai, United Arab Emirates INDIA Yamaha Music India Pvt. Ltd. Spazedge building, Ground Floor, Tower A, Sector 47, Gurgaon- Sohna Road, Gurgaon, Haryana, India INDONESIA PT.
eYAMAHA AV Receiver For more detailed information, refer to the Owner's Manual on the CD-ROM. To view the Owner's Manual, click on "English" in the screen displayed automatically when you insert the CD-ROM into your PC, or click on the model name if the screen to select models is displayed, and then click on "English" in the next screen. Then, follow the onscreen instructions. If the screen is not displayed automatically, open the "index.html" in the CD-ROM.
FCC INFORMATION (for US customers) COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE) Responsible Party: Yamaha Corporation of America A/V Division 1 IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 2 3 4 5 6 7 8 9 10 II 12 13 14 15 16 17 18 19 20 21 22 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this sound system in a well ventilated, cool, dry, clean place- away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. For proper ventilation, allow the following minimum clearances.
Information for Users on Collection and Disposal of Old Equipment and Used Batteries This label is required to be attached to a product of which the temperature of the top cover may hot during operation. • For U.K. customers If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below.
GYAMAHA LIMITED WARRANTY ON AV PRODUCTS Thank you for selecting a YAMAHA product. YAMAHA products are designed and manufactured to provide a high level of defect-free performance. Yamaha Corporation of America ("YAMAHA") is proud of the experience and craftsmanship that goes into each and every YAMAHA product.