User Manual

Technical Data Sheet

1 / 4

Remote Conference Processor RM-CR

Overview

Signal processor at the heart of the ADECIA, Yamaha’s Complete and

Customizable Communications Solutions.

Features

• Up to 2 RM-CG and 2 VXL1B-16P can be connected via PoE switch SWR2311P-10G

• Automatically recognizes connected devices on the same network for audio routing

• Equipped with the Auto Tuning functions that automatically measure and provide the optimum sound settings for the environment

• Equipped with the Auto Mixer functions that automatically optimizes the mixing balance of audio input via Dante

• Equipped with various input/output connections such as USB, VoIP, analog, and Bluetooth

• Standard network audio support for “Dante”; all compatible devices can be connected with single network cable

Rear Panel

PAGE 1
Remote Conference Processor RM-CR Overview Signal processor at the heart of the ADECIA, Yamaha’s Complete and Customizable Communications Solutions.
PAGE 2
Remote Conference Processor RM-CR Specifications General Specifications Input/Output Characteristics Input Level Nominal Description Remote Conference Processor Dimensions (W x D x H) 215mm x 260mm x 44mm Weight 1.6kg MIC IN 1,2 -46dBu XLR-3-31 type (Balanced, 2pin hot) Power Requirements PoE+ (IEEE 802.3at, LLDP), DC 48V AUX IN L,R -14dBV RCA Pin Maximum Power Consumption 15.0W In Operation Storage Input Terminal Output Terminal Source Impedance Connector Output Level Nominal Max.
PAGE 3
Remote Conference Processor RM-CR Dimensions Unit: mm (inch) Options • Rack Mount Kit RM-MRK • Table Mount Kit RM-MTL Technical Data Sheet 3/4
PAGE 4
Remote Conference Processor RM-CR Block Diagrams © 2021 Yamaha Corporation. All rights reserved. Product features and specifications are subject to change without notice by Yamaha. All other product and company names and logos that appear in this leaflet are trademarks or registered trademarks of their respective owners.