V2.
CONTENTS Contents Theatre mode...................................................................................................3 Improved labeling of the USER DEFINED keys and USER DEFINED knobs ..... 7 Dante Domain Manager (DDM)......................................................................8 Improved screen encoder operation ............................................................. 10 Improved channel name display ...................................................................
CONTENTS Theatre mode Theatre mode 3. Press the UNIT MODE tab. 4. Press the THEATRE button to change the mode. A popup confirmation window appears, informing you that the control surface will be rebooted after the mode is switched. 5. Press the OK button. This mode is suitable for use in theatres. It enables you to store EQ and dynamics settings in four banks and assign one of those banks to each actor on stage. In Theatre mode, EQ or dynamics parameter settings are not stored in each scene.
CONTENTS Theatre mode ■ To switch to Theatre mode on the DSP engine: SELECTED CHANNEL VIEW screen 1. Press the [MENU] key on the front panel of the DSP engine. If you select Theatre mode for the UNIT MODE and press the BANK display button, the SELECTED CHANNEL VIEW screen for an input channel will display the following information. 2. Use the []/[] keys to select “Unit Mode”. 3. Press the [ENTER] key. 4. Use the []/[] keys to select “Theatre”. 1 Unit Mode Theatre 2 3 5.
CONTENTS Theatre mode ■ Additional display in Theatre mode OVERVIEW screen The actor library name appears on the NAME popup button. If Theatre mode is selected for UNIT MODE, the OVERVIEW screen will contain the following information. In Theatre mode, the NAME/ICON EDIT popup window (accessed by pressing the NAME popup button) will display the name of the actor library on the ACTOR LIBRARY popup button. The actor library name appears in the channel name area.
CONTENTS Theatre mode ■ To set up a actor library: 1. 7 UPDATE EDITED button Updates all edited channel library settings. Press the PATCH button on the menu bar to access the PATCH screen. 8 RECALL EDITED button Recalls all edited channel library settings. 9 DEFAULT ALL button Cancels all channel library settings and initializes the current EQ and dynamics data in four banks. 5 1 2 3 4 3. Configure and/or edit a desired actor library as necessary.
CONTENTS Improved labeling of the USER DEFINED keys and USER DEFINED knobs Improved labeling of the USER DEFINED keys and USER DEFINED knobs 2. Press a USER DEFINED KEYS (or USER DEFINED KNOBS) button to open the USER DEFINED KEYS (or USER DEFINED KNOBS) popup window. The following example uses a USER DEFINED key. 3. Press the LABEL tab. You can now edit the labels for USER DEFINED keys and USER DEFINED knobs. ■ To edit the labels: 1. Press the SETUP button to access the SETUP screen.
CONTENTS Dante Domain Manager (DDM) 4. Press the desired USER DEFINED KEYS (or USER DEFINED KNOBS) button to open the USER DEFINED KEYS LABEL (or USER DEFINED KNOBS LABEL) popup window. 1 2 Dante Domain Manager (DDM) 3 You can now view the configuration status of the Dante Domain Manager (DDM). If the DDM server exists on a network or if the unit is joined to a domain, the DANTE SETUP popup window will display the DANTE DOMAIN MANAGER section.
CONTENTS Dante Domain Manager (DDM) ■ Supplemental information regarding the DSP mirroring operation on the Dante audio network 3 REMOTE Indicates the access status of the Dante settings of the external Dante device. • Operator: The settings can be both read and written. • Guest: The settings can only be read, but not written. • None: The settings cannot be read.
CONTENTS Improved screen encoder operation Improved screen encoder operation Improved HY SLOT4 feature You can now use the screen encoders to edit EQ and dynamics parameters on the SELECTED CHANNEL VIEW screen. EQ Dynamics HY SLOT4 (HY SLOT3 on the CSD-R7) now supports input/output patches. Due to this improvement, output channels are now patched via the OUTPUT tab, not on the RECORDING tab.
CONTENTS Expanded MIDI transmission/reception on/off function If the TAKE FROM CHANNEL button is turned on, the following HA parameter settings will be copied to the destination port. If you make an input patch from an input that does not retain the HA settings, the initial settings will be used.
CONTENTS Additional option in the GAINS SHOWN ON OVERVIEW SCREEN section GPI SETUP popup window Additional option in the GAINS SHOWN ON OVERVIEW SCREEN section The options for the GAIN knob displayed in the GAIN section of the OVERVIEW screen now include AUTO A.G./D.G., in addition to the existing ANALOG GAIN and DIGITAL GAIN options. SCREEN SETTINGS tab on the PREFERENCE popup window If AUTO A.G./D.G.
CONTENTS Additional library function Focus parameters (including Focus function on/off) can now be pasted by using the Global Paste function. Additional library function All Focus settings can now be stored or recalled as a library. These are the parameters that are cofigureable on the SCENE SETUP (FOCUS) popup window. Focus library data and actor library data have been added as options on the SCENE tab and INPUT/ OUTPUT tab respectively for loading and saving. 13 RIVAGE PM series V2.
Yamaha Pro Audio global website https://www.yamaha.com/proaudio/ Yamaha Downloads https://download.yamaha.