User Manual

ManualsBrandsYamaha ManualsMusic Production ToolsRedo series

reface Reference Manual

Using this Reference Manual ........................................................................2

Edit Mode ........................................................................................................2

Changing detailed operator settings............................................................3

Operator Settings screen (page 1)..................................................................3

Operator Settings screen (page 2)..................................................................4

KSC (Keyboard Scaling) level setting (page 3)..............................................4

Setting the EG (envelope generator) ............................................................5

EG Level

EG Level Settings screen ................................................................................5

EG Rate

EG Rate Settings screen..................................................................................6

Setting the LFO...............................................................................................7

LFO screen (page 1).........................................................................................7

LFO PMD On/Off screen (page 2)....................................................................8

LFO AMD screen (page 3)................................................................................8

Setting the Pitch EG.......................................................................................9

PITCH EG Level screen (page 1).....................................................................9

PITCH EG Rate screen (page 2) ....................................................................10

PITCH EG On/Off screen (page 3).................................................................10

Troubleshooting...........................................................................................11

Reference Manual

Summary of content (11 pages)

PAGE 1
Reference Manual EN Using this Reference Manual ........................................................................2 Edit Mode ........................................................................................................2 Changing detailed operator settings............................................................3 Operator Settings screen (page 1)..................................................................3 Operator Settings screen (page 2)..........................................
PAGE 2
Using this Reference Manual By using Edit mode on the reface DX, you can make detailed settings for individual operators. Please read this manual if you wish make detailed changes to Voices on the reface DX. Edit Mode In Edit mode, you can make detailed adjustments to Voice settings. NOTE To change the algorithm, use the [ALGO] button from the FM section. Edit mode is activated by pressing the [EDIT] button.
PAGE 3
Changing detailed operator settings Set Operators 1 to 4 as follows. 1. Press the [EDIT] button to activate Edit mode. 2. Press one of the [OP1] to [OP4] buttons to select the operator you wish to set. The setting screen for the corresponding operator is displayed. 3. If necessary, press the same button several times to select the required page from the setting screen. When a setting screen contains multiple pages, they are indicated in the form “ ” (i.e., page 1 of 3 pages). 4.
PAGE 4
 Operator Settings screen (page 2) 1 2 3 4 1 LEVEL 0 to 127 Sets the output level. In the case of carriers, this changes the volume. In the case of modulators, this changes the degree to which the carrier(s) are modulated. This value is also displayed when you press the [LEVEL] button. 2 VEL.S (Velocity Sensitivity) 0 to 127 Used to change the volume and/or tone based on how hard you play the keys. There is no change when the setting is “0”.
PAGE 5
Setting the EG (envelope generator) You can adjust the shape of the envelopes applied to the operators by using the [EG level] and [EG rate] buttons. Volumes and modulation degrees are set on the EG Level screen; rates of change are set on the EG Rate screen. Level Level 1 Level 2 Level 3 Level 4 Rate 1 Rate 2 Key on Rate 3 Rate 4 Time Key off EG Level EG levels can be set between “0” (minimum) and “127” (maximum) for each operator.
PAGE 6
EG Rate EG rates can be set between “0” (slowest) and “127” (fastest) for each operator. 1. Press the [EDIT] button to activate Edit mode. 2. Press the [EG rate] button. The EG Rate Settings screen is displayed. 3. If necessary, press the [EG rate] button several times to select the operator you wish to set. 4. Change the settings for Rate 1 to Rate 4 by using the sliders. 5. If necessary, alternately use the [EG level] and [EG rate] buttons to adjust the overall shape of the envelope. 6.
PAGE 7
Setting the LFO You can set the LFO (low frequency oscillator) to change the waveform used to vary the sound and apply effects such as vibrato, tremolo, and wah. 1. Press the [EDIT] button to activate Edit mode. 2. Press the [LFO] button. The LFO Settings screen is displayed. 3. If necessary, press the [LFO] button several times to switch between this screen’s pages. 4. Adjust the LFO by using the sliders and/or switches. 5.
PAGE 8
 LFO PMD On/Off screen (page 2) 1 2 1 Operator 1 LFO PMD On/Off 2 Operator 2 LFO PMD On/Off 3 Operator 3 LFO PMD On/Off 4 Operator 4 LFO PMD On/Off 3 4 ON and off Turns LFO PMD on and off. When turned on, the PMD settings from the LFO screen (page 1) are active.  LFO AMD screen (page 3) 1 2 3 1 Operator 1 AMD (amplitude modulation depth) 2 Operator 2 AMD 3 Operator 3 AMD 4 Operator 4 AMD 4 0 to 127 Sets the degree to which the amplitude is affected by the LFO (tremolo, wah).
PAGE 9
Setting the Pitch EG The operators’ pitches can be changed using an envelope. As with the normal EG, levels set the degree to which the pitches are affected; rates set the rate of change. These values are common to all operators. +48 Level 1 Level 3 Level 4 Level 0 Time Level 2 -48 Rate 1 Rate 2 Rate 3 Key on Rate 4 Key off 1. Press the [EDIT] button to activate Edit mode. 2. Press the [Pitch EG] button. The Pitch EG Settings screen is displayed. 3.
PAGE 10
 PITCH EG Rate screen (page 2) 1 2 1 Pitch EG Rate 1 2 Pitch EG Rate 2 3 Pitch EG Rate 3 4 Pitch EG Rate 4 3 4 0 to 127 Adjust the Pitch EG rates. The higher the value, the faster the pitch changes.  PITCH EG On/Off screen (page 3) 1 2 1 Operator 1 Pitch EG On/Off 2 Operator 2 Pitch EG On/Off 3 Operator 3 Pitch EG On/Off 4 Operator 4 Pitch EG On/Off 3 4 ON and off Turn the Pitch EG on or off for each operator.
PAGE 11
Troubleshooting If this instrument does not behave as expected—for example, not producing the correct sound or producing no sound at all—please refer first of all to “Troubleshooting” from your Owner’s Manual (page 46). Many issues can also be resolved by doing a Factory Reset (page 40). If any specific issue should persist, however, please contact your Yamaha dealer or a service center (see the back of this booklet). Issue No sound is produced. Notes continue to play without end.