AB Network Receiver OWNER’S MANUAL
Caution: Read this before operating your unit. Caution: Read this before operating your unit. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. For proper ventilation, allow the following minimum clearances.
Contents ADVANCED OPERATION Configuring playback settings for different playback sources (OPTION menu)......................34 Front panel ..................................................................... 4 Front display .................................................................. 6 Rear panel ...................................................................... 7 Remote control............................................................... 8 Using the remote controls............................
INTRODUCTION Useful features Useful features This unit allows you to: Play back music from your iPod and USB devices ➡ p.21, 23 Play back music from network sources (PC/NAS, AirPlay) ➡ p.25, 28 Listen to network streaming services ➡ p.27, 29 Listen to FM and AM radio stations ➡ p.17 Boost bass sounds by connecting a subwoofer ➡ p.10 Configure speaker impedance ➡ p.11 Use this unit’s remote control to operate other components such as a CD player, BD/DVD player or TV ➡ p.
Supplied accessories Supplied accessories Check that the following accessories are supplied with the product.
Controls and functions Controls and functions Front panel 12 3 C D 4 5 6 7 8 9 E F G H 1 A (power) Turns on/off (standby) the unit. Note In standby mode, this unit consumes a small amount of power to receive infrared signals from the remote control. : I A J B K L M 7 CLEAR Clears a FM/AM preset station when TUNER is selected as the input source (p.19). 8 Front display Shows information about the operational status of this unit.
Controls and functions F INPUT selector Selects the input source you want to listen to. INTRODUCTION G BASS control Increases or decreases the low frequency response. The center position produces a flat response (p.15). H TREBLE control Increases or decreases the high frequency response. The center position produces a flat response (p.15).
Controls and functions Front display 1 2 3 4 5 SLEEP STEREO TUNED 8 1 Information display Displays the current status (such as input name sound mode name). You can switch the information that is displayed when you press DISPLAY (p.33). 2 STEREO Lights up when the unit is receiving a stereo FM radio signal. 3 TUNED Lights up when the unit is receiving an FM/AM radio station signal.
Controls and and functions functions Controls Rear panel 9 2 3 : A 4 5 6 7 8 INTRODUCTION 1 B 1 PHONO jacks For connecting to a turntable (p.10). 2 OPTICAL 1-2 jacks For connecting to audio components equipped with optical digital output (p.10). 3 ANTENNA terminals For connecting to FM and AM antennas (p.12). 4 COAXIAL 1-2 jacks For connecting to audio components equipped with a coaxial digital output (p.10).
Controls and functions Remote control This section describes the function of each key on the remote control used to control this unit or other components made by Yamaha or other manufacturers.
Controls and functions Using the remote controls ■ Installing batteries INTRODUCTION AAA, R03, UM-4 batteries ■ Operation range The remote controls transmit a directional infrared beam. Be sure to aim the remote controls directly at the remote control sensor on the front panel of this unit.
PREPARATION Connections Connections Connecting speakers and source components CAUTION • Do not connect this unit or other components to the main power until all connections between components are complete. • All connections must be correct: L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass.
Connections ■ Connecting via banana plug Connecting the speakers ■ Setting the speaker impedance Under its default settings, the unit is configured for 8-ohm speakers. When connecting 4 to 6-ohm speakers, set the speaker impedance to “4 MIN”. Before connecting speakers, connect the power cable to an AC wall outlet. 2 While holding down RETURN on the front panel, press A (power).
Connections Connecting the FM and AM antennas The antennas for receiving FM and AM broadcasts are included with this unit. In general, these antennas should provide sufficient signal strength. Connect each antenna correctly to the designated terminals. Note If you experience poor reception quality, install an outdoor antenna. Consult the nearest authorized Yamaha dealer or service center about outdoor antennas.
Connections Connecting to a network You can enjoy Internet radio or music files stored on media servers, such as PCs and Network Attached Storage (NAS), on the unit. Connect the unit to your router with a commercially-available STP network cable (CAT-5 or higher straight cable).
BASIC OPERATION Playback Playback CAUTION Extreme caution should be exercised when you play back CDs encoded in DTS. If you play back a CD encoded in DTS on a CD player that does not support DTS, only noise will be heard, and this noise may damage your speakers. Check whether your CD player supports CDs encoded in DTS. Also, check the sound output level of your CD player before you play back a CD encoded in DTS. Playing a source A (power) 4 Play the source.
Playback ■ Adjusting the BASS and TREBLE controls ■ Adjusting the LOUDNESS control LOUDNESS TREBLE BASS The BASS and TREBLE controls adjust high and low frequency response. The center position produces a flat response. BASS When you feel there is not enough bass (low frequency sound), rotate clockwise to boost. When you feel there is too much bass, rotate counterclockwise to suppress.
Playback Using the sleep timer Use this feature to automatically set this unit to standby mode after a certain amount of time. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. CODE SET SOURCE RECEIVER RECEIVER A SLEEP SLEEP SPEAKERS ID DIMMER A B COAX1 COAX2 OPT1 OPT2 LINE1 LINE2 LINE3 PHONO TUNER CD USB NET Note The sleep timer can only be set with the remote control.
Listening to FM/AM radio Listening to FM/AM radio • “Wrong Station!” is displayed on the front display if you enter a frequency that is out of receivable range. Make sure that the entered frequency is correct. FM/AM tuning TUNER LINE1 LINE2 LINE3 PHONO TUNER CD USB NET FM AM PRESET TUNING FM AM y TUNING H / I MEMORY SHUFFLE REPEAT NOW PLAYING HOME 1 2 3 4 5 6 7 8 9 0 +10 ENT TV VOL TV CH 1 Numeric keys TV TV INPUT Press TUNER to select TUNER as the input source.
Listening to FM/AM radio Automatic preset tuning (FM stations only) VOL. SP A 01:FM 87.50MHz You can use the automatic preset tuning function to automatically register FM stations as presets. This function enables this unit to automatically tune in to FM stations that have a strong signal and store up to 40 of those stations in order. You can then easily recall any preset station by selecting its preset number.
Listening to FM/AM radio Recalling a preset station You can recall preset stations that were registered using automatic station preset or manual station preset. Clearing a preset station Clear radio stations registered to the preset numbers.
Listening to FM/AM radio ■ Receiving traffic information automatically Radio Data System tuning (U.K.model only) Radio Data System is a data transmission system used by FM stations in many countries. The unit can receive various types of Radio Data System data, such as “Program Service”, “Program Type,” “Radio Text” and “Clock Time”, when it is tuned into a Radio Data System broadcasting station.
Playing back iPod music Playing back iPod music You can play back iPod music on the unit using a USB cable supplied with the iPod. Note An iPod may not be detected by the unit or some features may not be compatible, depending on the model or software version of the iPod. Playback of iPod content Follow the procedure below to operate the iPod contents and start playback.
Playing back iPod music Use the following remote control keys to control playback. You can configure the repeat/shuffle settings of your iPod. External device operation keys Function p Resumes playback from pause. s Stops playback. e Stops playback temporarily. b ■ Repeat/shuffle settings 1 If the input source is “USB,” press REPEAT or SHUFFLE repeatedly to select the playback method. Item Skips forward/backward. a Repeat w Searches forward/backward (by holding down).
Playing back music stored on a USB storage device Playing back music stored on a USB storage device You can play back music files stored on a USB storage device on the unit. Refer to the instruction manuals for the USB storage device for more information. The unit supports USB mass storage class devices (FAT16 or FAT32 format). Notes • • • • The unit supports WAV (PCM format only), MP3, WMA, MPEG-4 AAC and FLAC files (1- or 2-channel audio only).
Playing back music stored on a USB storage device Use the following remote control keys to control playback. External device operation keys Function p Resumes playback from pause. s Stops playback. e Stops playback temporarily. b Skips forward/backward. a HOME Displays the top menu of the USB device. NOW PLAYING Displays information about the song that's playing. ■ Repeat/shuffle settings You can configure the repeat/shuffle settings for playback of USB storage device contents.
Playing back music stored on media servers (PCs/NAS) Playing back music stored on media servers (PCs/NAS) You can play back music files stored on your PC or DLNA-compatible NAS on the unit. Notes • To use this function, the unit and your PC must be connected to the same router (p.13). You can check whether the network parameters (such as the IP address) are properly assigned to the unit in “Information” (p.36) in the “SETUP” menu.
Playing back music stored on media servers (PCs/NAS) Use the following remote control keys to control playback. Playback of PC music contents Follow the procedure below to operate the PC music contents and start playback. External device operation keys Note p Resumes playback from pause. s Stops playback. e Stops playback temporarily. “_” (underscore) will be displayed for characters not supported by the unit.
Listening to Internet radio Listening to Internet radio You can listen to Internet radio stations from all over the world. y Notes • To use this function, the unit must be connected to the Internet (p.13). You can check whether the network parameters (such as the IP address) are properly assigned to the unit in “Information” (p.36) in the “SETUP” menu. • You may not be able to receive some Internet radio stations. • The unit uses the vTuner Internet radio station database service.
Playing back iTunes/iPod music via a network (AirPlay) Playing back iTunes/iPod music via a network (AirPlay) The AirPlay function allows you to play back iTunes/iPod music on the unit via network. PC iTunes 3 Select a song and start playback. The unit automatically selects “AirPlay” as the input source and starts playback. The playback information is displayed on the front display.
Listening to Pandora service Listening to Pandora service (Australia model only) The Pandora service is available in the U.S.A, Australia, New Zealand only. Notes • To use this function, the unit must be connected to the Internet. For detail on connections and network settings (p.13). • If any error message appears on the front display, see “Error indications on the front display” (p.
Listening to Pandora service If you select “Activation” in Step 2 a Write down the URL and active code shown in the 2 Press OPTION. 3 Use the cursor keys (B / C) to select “Create Station” and press ENTER. 4 Use the cursor keys to enter the name of an artist or a track (all or part of the name) and press ENTER. front display. VOL. SP A http://www.pan SW R L b Use a web browser on your PC to access the URL and follow the on-screen instruction to register for a Pandora account.
Listening to Pandora service Playback of Pandora stations 3 If you have created Pandora stations, follow the procedure below to select a Pandora station to be played. LINE1 LINE2 LINE3 PHONO TUNER CD USB NET PRESET TUNING FM Perform the following procedure if you needed. If you want to set a rating of track a When the playback information is displayed, press OPTION. b Use the cursor keys (B / C) to select “RateThisTrack” and press ENTER. NET AM MEMORY VOL.
Listening to Pandora service Deleting Pandora stations The created Pandora station can be deleting in the following procedures. SHUFFLE HOME REPEAT Editing the Pandora accounts You can register up to 8 Pandora accounts on the unit. Follow the procedure below to add or remove Pandora accounts, or switch to another Pandora account.
Switching information on the front display Switching information on the front display When you select USB or a network source as the input source, you can switch playback information on the front display. HOME NOW PLAYING SETUP OPTION ENTER DISPLAY VOLUME RETURN DISPLAY TOP MENU 1 POP-UP MENU MUTE Press DISPLAY. Each time you press the key, the displayed item changes. VOL. SP A Song Item name BASIC OPERATION About 3 seconds later, the corresponding information for the displayed item appears.
ADVANCED OPERATION Configuring playback settings for different playback sources (OPTION menu) Configuring playback settings for different playback sources (OPTION menu) You can configure separate playback settings for different playback sources. This menu allows you to easily configure settings during playback.
Configuring various functions (SETUP menu) Configuring various functions (SETUP menu) You can configure the unit’s various functions. HOME NOW PLAYING SETUP OPTION SETUP menu items SETUP Cursor keys ENTER RETURN ENTER DISPLAY TOP MENU 1 Menu item VOLUME Displays the network information on the unit. 36 IP Address Configures the network parameters (such as IP address). 36 MAC Filter Filter Sets the MAC address filter to limit access to the unit from other network devices.
Configuring various functions (SETUP menu) Network Setup 4 Use the Cursor keys (B / C) or numeric keys to change a value. 5 To exit from the menu, press SETUP. Configures the network settings. ■ Information Displays the network information on the unit. NewFwAvailable Appears if an update for this unit's firmware is available (p.43).
Configuring various functions (SETUP menu) ■ Network Name Edits the network name (the unit’s name on the network) displayed on other network devices. 1 Select “Network Name”. VOL. SP A Network Name 2 Press ENTER to enter the name edit display. Initial Volume Sets the initial volume when the receiver is turned on. Off (default) Sets the level to the volume level of the unit when it last entered standby mode. Mute Sets the unit to mute the audio output. -80.0 dB to +16.5 dB (0.
Configuring the system settings (ADVANCED SETUP menu) Configuring the system settings (ADVANCED SETUP menu) Configure the system settings of the unit while viewing the front display. Changing the speaker impedance setting (SP IMP.) 1 Turn off the unit. 2 While holding down RETURN on the front panel, press A (power). A (power) SP IMP. 8 MIN RETURN Change the unit’s speaker impedance settings depending on the impedance of the speakers connected.
Configuring the system settings (ADVANCED SETUP menu) Restoring the default settings (INIT) Checking the firmware version (VERSION) INIT CANCEL VERSION xx.xx Restores the default settings for the unit. Choices ALL Restores the default settings for the unit. CANCEL Does not perform an initialization. Updating the firmware (UPDATE) Check the version of firmware currently installed on the unit. y • You can also check the firmware version in “Update” (p.37) in the “SETUP” menu.
Controlling external devices with the remote control Controlling external devices with the remote control You can use the unit’s remote control to operate external devices (such as CD players) if you have registered the remote control code of the external device. Notes • You cannot control an external device that does not have a remote control sensor. • Ensure that the remote control ID of the external device is set to “ID1”. If any other ID is selected, the remote control operations may not work properly.
Controlling external devices with the remote control Registering the remote control codes for playback devices You can use the unit’s remote control to operate playback devices if you have registered their remote control codes. You can also use the input selection keys to change the playback devices that are controlled by the remote control, because their remote control codes are assigned to the input selection keys.
Controlling external devices with the remote control Resetting remote control codes You can reset the remote control codes assigned to each input selection keys to the factory default.
Updating the unit’s firmware via the network Updating the unit’s firmware via the network New firmware that provides additional features or product improvements will be released as needed. If the unit is connected to the Internet, you can download the firmware via the network and update it. Notes • Do not operate the unit or disconnect the power cable or network cable during firmware update. Firmware update takes about 20 minutes or more (depending on your Internet connection speed).
ADDITIONAL INFORMATION Troubleshooting Troubleshooting Refer to the chart below if this unit does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, set this unit to standby mode, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. ■ General Problem This unit fails to turn on. No sound The sound suddenly goes off. Only the speaker on one side can be heard.
Troubleshooting Problem Cause Remedy See page There is a lack of bass and no ambience. The + and – wires are connected in reverse at the amplifier or the speakers. Connect the speaker wires to the correct + and – phase. 10 A “humming” sound can be heard. Incorrect cable connections. Connect the audio plugs firmly. If the problem persists, the cables may be defective. 10 No connection from the turntable to the GND terminal. Make the GND connection between the turntable and this unit.
Troubleshooting ■ Tuner Problem FM FM/ AM AM 46 En Cause Remedy See page FM stereo reception is noisy. The particular characteristics of the FM stereo broadcasts being received may cause this problem when the transmitter is too far away or the antenna input is poor. Check the antenna connections. Try using a high-quality directional FM antenna. 12 Switch to monaural mode. 17 There is distortion, and clear reception cannot be obtained even with a good FM antenna.
Troubleshooting ■ USB and network Problem Cause Remedy See page The USB device is not connected to the USB jack securely. Turn off the unit, reconnect your USB device, and turn the unit on again. The file system of the USB device is not FAT16 or FAT32. Use a USB device with FAT16 or FAT32 format. Folders and files in the USB device cannot be viewed. The data in the USB device is protected by the encryption. Use a USB device without an encryption function. The network feature does not function.
Troubleshooting ■ Remote control Problem The remote control does not work nor function properly. 48 En Remedy See page The remote control will function within a maximum range of 6 m (20 ft) and no more than 30 degrees offaxis from the front panel. 9 Cause Wrong distance or angle. Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is striking the remote control sensor of this unit. Reposition this unit. The batteries are weak. Replace all batteries.
Error indications on the front display Error indications on the front display Message Cause Remedy Access denied Access to the PC is denied. Configure the sharing settings and select the unit as a device to which music contents are shared (p.25). Access error The unit cannot access the USB device. Turn off the unit and reconnect your USB device. If the problem persists, try another USB device. The unit cannot access the iPod. Turn off the iPod and turn it on again.
Trademarks Trademarks “Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.
Specifications Specifications AUDIO SECTION FM SECTION • Minimum RMS Output Power (20 Hz to 20 kHz, 0.04% THD, 8 ) ..........................80W + 80W • Dynamic power per channel (IHF) (8/6/4/2 ) .......................................................105/125/150/178 W • Maximum power per channel [Europe model only] (1 kHz, 0.7% THD, 4 ) ......................................................105 W • IEC power [Europe model only] (1 kHz, 0.04% THD, 8 ).....84 W • Power band width (0.06% THD, 40W, 8 ) .
Index Index A ADVANCED SETUP menu.......................................... 38 AirPlay........................................................................... 28 AM antenna connection................................................. 12 AM radio listening......................................................... 17 Audio device connection ............................................... 10 Audio file format (PC/NAS) ......................................... 25 Audio file format (USB storage device)........
Index Network Setup (SETUP menu) ..................................... 36 Network Update (Network Setup, SETUP menu) ......... 37 NewFwAvailable ........................................................... 43 NOW PLAYING key (Internet radio) ........................... 27 NOW PLAYING key (iPod) ......................................... 21 NOW PLAYING key (Pandora).................................... 31 NOW PLAYING key (PC/NAS)................................... 26 NOW PLAYING key (USB storage device) ......
❚ Information about software This product uses the following free software. For information (copyright, etc) about each software, read the original sentences stated below. ■ About ASN.1 object dumping code ASN.1 object dumping code, copyright Peter Gutmann , based on ASN.1 dump program by David Kemp , with contributions from various people including Matthew Hamrick , Bruno Couillard , Hallvard Furuseth
The authors make NO WARRANTY or representation, either express or implied, with respect to this software, its quality, accuracy, merchantability, or fitness for a particular purpose. This software is provided “AS IS”, and you, its user, assume the entire risk as to its quality and accuracy.
4. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Guy Eric Schalnat Paul Schmidt Tim Wegner The PNG Reference Library is supplied “AS IS”. The Contributing Authors and Group 42, Inc. disclaim all warranties, expressed or implied, including, without limitation, the warranties of merchantability and of fitness for any purpose. The Contributing Authors and Group 42, Inc.
LIST OF REMOTE CONTROL CODES Autovox TV A.R.
Gateway GBC GE 0176, 0177, 0241 0323, 0343, 0344 0008, 0021, 0023, 0026, 0027, 0031, 0034, 0049, 0052, 0056, 0209 Geant Casino 0321 GEC 0282, 0320, 0342, 0347, 0349, 0350 Geloso 0323, 0343, 0346 General Technic 0323, 0343 Genexxa 0320, 0340, 0347, 0350 GFM 0128, 0227 Giant 0282 Gibralter 0008, 0030, 0050, 0062 GoldHand 0277 Goldline 0320 GoldStar 0007, 0008, 0012, 0026, 0031, 0050, 0053, 0161, 0277, 0282, 0320, 0323, 0342, 0343, 0346, 0349, 0350 Goodmans 0246, 0272, 0282, 0320, 0323, 0337, 0343, 0344, 0349
Nikkai Nikko Nobliko Nokia Norcent Nordic Nordmende Nordvision Novatronic Oceanic Okano Olevia ONCEAS Onwa Opera Oppo Optimus Optoma Optonica Orbit Orion Orline Osaki Oso Otto Versand Pael Palladium Palsonic Panama Panasonic Panavision Pathe Cinema Pausa Penney Perdio Perfekt Philco Philharmonic Philips 0277, 0282, 0320, 0323, 0337, 0340, 0342, 0349, 0350 0026, 0031, 0050 0171, 0277, 0341, 0342 0347 0201 0282 0339, 0345, 0347, 0350 0349 0320 0321, 0347 0161, 0320, 0351 0102, 0199, 0200, 0207, 0222 03
Sylvania 0008, 0009, 0010, 0011, 0013, 0026, 0048, 0050, 0051, 0128, 0227, 0253 Symphonic 0051, 0058, 0062, 0128, 0179, 0215 Syntax 0199 Syntax-Brillian 0199 Sysline 0349 Sytong 0277 Tandy 0178, 0282, 0336, 0340, 0342, 0347 Tashiko 0277, 0282, 0342, 0344, 0346 Tatung 0052, 0177, 0282, 0320, 0342, 0349, 0350 TCM 0337, 0343 TCL 0400, 0401, 0403, 0406, 0494 Teac 0282, 0320, 0400 Tec 0282, 0323, 0342, 0343 Technics 0017, 0023, 0056 TechniSat 0274, 0496, 0497, 0499 Techwood 0008, 0023, 0026, 0056 TEDELEX 0282 T
Hush Hypson 1016 1008, 1009, 1024, 1029 iBUYPOWER 1016 Impego 1030 Imperial 1026 Inno Hit 1008, 1009, 1025, 1028, 1029, 1030 Innovation 1024 Instant Replay 1068 Interbuy 1008, 1031 Interfunk 1028 Intervision 1009, 1026 Irradio 1008, 1029, 1031 ITT 1027 ITV 1009, 1025, 1031 JC Penney 1064, 1065, 1068, 1070, 1071 JCL 1068 JVC 1007, 1018, 1027, 1039, 1064, 1065, 1066, 1067, 1078, 1089, 1092, 1093, 1094, 1095, 1113, 1208, 1209, 1212, 1213, 1215, 1218 Kaisui 1008, 1029 Karcher 1028 Kendo 1008, 1024, 1025, 1030
Aspire 2152, 2222 Astar 2240 ATACOM 2364 Audiovox 2061, 2149 Avious 2367 Awa 2363 Axion 2249 Bang & Olufsen 2128 Baze 2367 BBK 2364 Bellagio 2363 Best Buy 2359 Blaupunkt 2131 Blue Parade 2157 Boghe 2382 Brainwave 2362 Brandt 2148, 2188 Broksonic 2145, 2146 Bush 2064, 2110, 2170, 2268, 2290, 2346, 2358, 2367, 2383 California Audio Labs 2151 Cambridge Audio 2354 CAT 2352, 2353 CAVS 2192 Centrum 2353 CGV 2354, 2362 Changhong 2140 Cinetec 2363 CineVision 2133, 2237 Clatronic 2358, 2367 Coby 2031, 2046, 2360 Con
Sharp 2006, 2040, 2088, 2091, 2182, 2194, 2220, 2221, 2231, 2236, 2293, 2340 Shinsonic 2245 Sigmatek 2359, 2364 Silva 2356 Singer 2354, 2355 Skymaster 2325, 2355 Skyworth 2356 Slim Art 2362 SM Electronic 2355 Sonic Blue 2133 Sontech 2366 Sony 2004, 2005, 2007, 2009, 2014, 2015, 2023, 2026, 2027, 2052, 2068, 2069, 2070, 2071, 2074, 2075, 2084, 2085, 2087, 2168, 2171, 2208, 2210, 2211, 2258, 2273, 2284, 2285, 2312, 2313, 2314, 2315, 2318, 2319, 2466 Soundmaster 2355 Soundmax 2355 Spectra 2363 Spectroniq 2201
Scientific Atlanta 3000, 3001, 3002, 3003, 3006, 3028, 3029, 3081, 3086, 3089, 3094, 3095, 3108 Signal 3072, 3123 Signature 3066 Sony 3092, 3125 Sprucer 3118 Standard Component 3115 Starcom 3017, 3072, 3119, 3123 Stargate 3072, 3123 Starquest 3072, 3123 Supercable 3090 Supermax 3127 Tele+1 3107, 3111 TELENET 3004 Telepiu 3107 Thomson 3082, 3091 TIME WARNER 3084 Tocom 3067 Torx 3017 Toshiba 3122 Tristar 3127 Tudi 3102 Tusa 3072, 3123 TV86 3077 Unika 3065, 3070 United Cable 3018, 3119 Universal 3065, 3070 Uni
Metronic 4001, 4004, 4005, 4010, 4028, 4031, 4217 Metz 4015 Micro electronic 4217, 4218, 4219 Micro Technology 4217 MicroGem 4106 Micromaxx 4008, 4024 Microstar 4008 Microtec 4217 Minerva 4015 Mitsubishi 4006, 4015, 4202 Mitsumi 4054 Morgan's 4011, 4053, 4054, 4055, 4217 Motorola 4019, 4088, 4090, 4091 Multichoice 4222, 4246 Multitec 4212 Muratto 4049 Mysat 4217 Navex 4013 Neuhaus 4009, 4048, 4217, 4218, 4219 Neusat 4217 Next Level 4019 NextWave 4223 Nikko 4011, 4217 Nokia 4006, 4040 Nordmende 4001, 4006,
■ For U.K. customers If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below. The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet. ■ Special Instructions for U.K.
© 2013 Yamaha Corporation Printed in Malaysia ZH44730
