For PM5000 Ser ies Mixing Consoles Owner’s Manual Thank you for purchasing a PW5000 Power Supply. The PW5000 has been specifically designed for use with Yamaha PM5000 Series Mixing Consoles. In order to achieve optimum performance from the PW5000, and take full advantage of the features it provides, please read this manual carefully and keep it handy for future reference.
Explanation of Graphical Symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The above warning is located on the rear of the unit.
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: Water warning Power supply/Power cord • Only use the voltage specified as correct for the device.
FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/ or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
Controls and Connectors ■ Front Panel POWER SUPPLY POWER OPERATION MONITOR FAN LINE VOLTAGE HIGH NORMAL +16 -16 +12 +48 STOP THERMAL CAUTION ON OFF FAN SPEED AUTO 1 2 1 POWER ON/OFF Switch After connecting the PW5000 to the PM5000 console using the cable supplied with the PM5000, and after plugging the PW5000 power cord into an appropriate AC outlet, use this switch to turn power to the PM5000 ON or OFF.
■ Rear Panel 5000 9,10,14,15 1,2,4,5 22,23,25,26,27 19 ) 8 8 DC PARALLEL INPUT Connector This connector is used to connect two PW5000 units in parallel. Two PW5000’s can be connected in this way to distribute the power load, thus reducing the load on each unit, and to ensure uninterrupted failsafe operation in the even that one unit shuts down. Use only the optional PSL5000 Power Supply Link Cable for this connection. Rotate the connector ring to the left to connect, or to the right to disconnect. 13.
■ Dimensions 168 50 57 459 245 391 434 176 186 480 (mm) 345 ■ Specifications General Specifications Power Supply Cable Pin Assignments Power Supply U.S./Canada: 120 V, 60 Hz Australia: 240 V, 50 Hz Other: 230 V, 50 Hz Power Consumption U.S./Canada: 1100 W, 1250 VA Other: 1100W Dimensions (W x H x D) Weight Cooling Fan Speed Settings Function No.
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311 U.S.A. Yamaha Corporation of America 6600 Orangethorpe Ave., Buena Park, Calif. 90620, U.S.A.