POWER SUPPLY Owner’s Manual Mode d’emploi Bedienungsanleitung M
FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
■Precautions • Connect the power supply power cord only to an AC outlet of the type stated in this Owner’s Manual or as marked on the power supply unit. Failure to do so is a fire and electrical shock hazard. • Do not try to modify the power supply unit. This could be a fire and electrical shock hazard. • Do not locate the power supply unit in a place subject to excessive heat or in direct sunlight. This could be a fire hazard.
■Front panel 1 2 POWER OPERATION MONITOR +48V +12V +15V –15V POWER SUPPLY NORMAL ON/ OFF ■Rear panel 5 DC PARALLEL INPUT CONNECT 4 DC OUTPUT CONNECT PIN 2 +15V 4.2A PIN 5 –15V 4.2A PIN 6 +12V 4.1A PIN 9 +48V 0.2A DISCONNECT DISCONNECT 3 The PW3000M power supply should be installed in a well ventilated location. In particular, the front and rear panels must not be blocked, since the ventilation path passes through them.
■Specifications Power Requirements USA and Canada: 120 V, 60 Hz Europe: 230 V, 50 Hz Others: 240 V, 50 Hz Power Consumptions USA and Canada: 400 W, 540 VA Europe: 380 W Others: 380 W Dimension (W x H x D) 480mm x 103.5mm x 455mm Weight 15kg ■Power supply cable pin configuration Pin No.