POCKET RECORDER POCKETRAK C24 Reference Manual EN
Table of Contents Table of Contents 1 Starting Up.................................. 4 5 Playback Settings.......................26 Part names and functions ................................. 4 Changing the playback speed ........................ 26 Front, side and back panels .................................... 4 LCD screen ............................................................ 7 Playing back specific sections of a track ......... 27 2 Recording ....................................
Table of Contents 9 Deleting..................................... 44 12 Using the Recorder Managing the Recycle Bin .............................. 44 with a Computer .....................59 Activating the Recycle Bin function ...................... 44 Displaying the Recycle Bin folder.......................... 45 Playing back a file in the Recycle Bin folder .......... 45 Restoring a file from the Recycle Bin folder........... 46 Emptying the Recycle Bin folder ...........................
1 Starting Up 1 Starting Up Part names and functions Front, side and back panels B 1 2 3 4 5 6 7 8 9 0 A C D I J E K F L G H 1 LCD screen 2 MENU/FOLDER button While the main screen is displayed, press and hold down this button to display the menu screen. While the main screen is displayed, press and hold down this button for at least two (2) seconds to display the folder select screen.
1 Starting Up B 8 1 9 2 3 4 0 5 6 7 A C D I J E K F L G H 6 / (fast reverse/fast forward) button Press these buttons during playback to fast reverse, fast forward or locate the beginning of a file. While the recorder is stopped, use these buttons to select a file in the folders. Press these buttons during the menu setting operation to move to the next (right or left) item or the next layer (up or down).
1 Starting Up B 1 2 3 4 5 6 7 8 9 0 A C D I J E K F L G H B Stereo microphone C Speaker D POWER/HOLD switch E F G H I J K L Turns the power to the recorder on or off. Slide the switch briefly to turn the power on. Slide and hold the switch at least two (2) seconds to turn the power off. Set the switch to HOLD to engage the Hold function (to avoid accidental operation). MIC/LINE switch Enables you to select mic recording or line recording (from an external audio device).
1 Starting Up LCD screen The unit will not display all the following indicators and items at the same time.
2 Recording 2 Recording For information on recording preparation, please refer to the Owner’s Manual. Recording a musical performance Before recording, make sure that the recorder displays the recording level (that is, the ALC function is turned off) (page 13). Also, set [MICSENS] (microphone sensitivity) to [LOW] (page 13). 1. Point the built-in stereo microphone toward the sound source, then press the [REC] button. The unit enters recording [STANDBY] mode. The LED indicator flashes red slowly.
2 Recording • If the recording level is too high: The level meter frequently will move all the way to the right, the recording LED will flash rapidly, and the indicator will appear on screen. Press the [INPUT/SPEED](–) button to lower the recording level. 3. Press the [REC] button again. The LED lights up red and recording begins. Hint: During recording, you can monitor audio being recorded through the headphones. Indicators displayed during recording Folder name 40 PCM 88.
2 Recording Recording with an external microphone You can use an external microphone for recording (instead of using the built-in stereo microphone). For an external microphone, you can use a stereo or monaural powered microphone, or a stereo or monaural dynamic microphone. To set up the recorder for your type of external microphone, follow the steps below: 1. Slide the [MIC/LINE] switch toward [MIC].
2 Recording Recording from an external audio device (such as a CD player) You can record line input sources from an external audio device (such as a CD player or MD player). 1. While the main screen is displayed, slide the [MIC/LINE] switch toward [LINE]. The recorder is set up to record line input sources, and the indicator in the upper right of the LCD displays “LINE.” Note: · For information on how to change the recording mode, see page 12.
3 Recording Settings 3 Recording Settings Changing the Recording mode (Selecting a sound quality) The recorder enables you to record audio in MP3 or PCM (WAV) format. In PCM mode, noncompressed audio data will be recorded. In MP3 mode, compressed audio data will be recorded. With the better sound quality, the data size will be larger and available recording time will be shorter. Changing Recording mode 1.
3 Recording Settings Turning the ALC (Auto Level Control) on and off Note: You can turn the ALC function on or off when recording audio to folders A–D. • Turning the ALC function on Press the [ALC/DELETE] button while the main screen is displayed to display in the upper right of the LCD. The recording level will automatically be adjusted in response to the input level.
3 Recording Settings Setting the recording EQ (equalizer) Setting the recording EQ enables to record the audio of the desired tonal quality by boosting the lower or higher frequency ranges. You can use the recording EQ only when recording audio to folders A–D and when the ALC function is turned off. About recording EQ options The recorder offers eight recording EQ presets and one USER recording EQ option (that enables you to customize by cutting and boosting five EQ bands individually).
3 Recording Settings Selecting a recording EQ option 1. Press the [ALC/DELETE] button to turn the ALC function off (page 13). 2. Press and hold down the [MENU/FOLDER] button for at least two (2) seconds while the main screen is displayed, press the [PLAY]/[STOP], [ ]/[ ] buttons to select a folder into which to record, then press the [REC] button. Select a folder from folders A–D. 3. Press the [REC] button. The unit displays the [STANDBY] indicator. 4.
3 Recording Settings Customizing the recording EQ The USER recording EQ enables you to customize the level of five EQ bands. 1. Select “USER” while the recording EQ screen is displayed. Refer to steps 1–5 in the “Selecting a recording EQ option” section on page 15. 2. Press the [STOP] button. The 150Hz band will be selected and displayed as a black bar. 3. Press the [ ]/[ ] buttons to select a frequency band that you wish to cut or boost. The selected frequency band will be displayed as a black bar.
3 Recording Settings Setting the recording peak limiter When the recording peak limiter is set to ON, the recorder reduces sound distortion by automatically adjusting excessive peaks. It is recommended that you set the limiter to ON when you are recording audio. The peak limiter is available only when the ALC is set to OFF. Procedure: Press the [MENU/FOLDER] button while the main screen is displayed, select [REC MENU] → [REC LIMITER] → [ON], then press the [REC] button.
3 Recording Settings Setting the recording peak hold indication You can set the duration of the recording peak and recording margin indicators that are displayed on the LCD. This setting can make it easier to check the recording level, especially when you want to record live with the recording level set to maximum, or to avoid clipping. Hint: The peak hold function sustains the indication of level meter segments for a specified duration so that you can view the recording peak levels easily.
3 Recording Settings VAS (Voice Activated System) recording When the VAS recording function is turned on, if the unit is in recording pause mode, the unit will automatically start to record as soon as it detects audio at a level above a certain threshold. The unit will pause recording when the detected audio level falls below the threshold. The VAS function enables you to start a new recording each time you start playing your musical instrument during practice sessions.
3 Recording Settings Setting the Auto Divide function (AUTO DIVIDE) If you turn the Auto Divide function on when recording a line source, such as tracks from a CD player, the unit automatically detects a silent pause between tracks and records each track as an individual file. More specifically, when the recorder detects a silent pause of two seconds or longer, it pauses recording, thus storing the audio data up to the silent pause as one file.
3 Recording Settings Recording with the self timer You can specify the time duration from the press of the [REC] button until the start of recording. This function is useful when you need some time to prepare. For example, you may wish to practice your musical instrument until the actual recording starts. 1. Press the [MENU/FOLDER] button while the main screen is displayed, select [REC MENU] → [SELF TIMER], then press the [REC] button. 2.
3 Recording Settings Changing the LED setting You can set the LED indicator so that it will light up during recording (the ON option), or NOT light up during recording (the OFF option). Alternatively, you can set the indicator so that it will function as a recording peak LED indicator (the FLASH ON PEAK option), in which case the LED indicator will flash only at recording peaks, and otherwise turn off during recording. 1.
4 Playback 4 Playback Playing files The recorder plays MP3 and WMA format files in addition to WAV format files recorded on the unit. To play back a file recorded on the unit, select a folder from the MIC (A–D) folders or the LINE (L) folder. To play back a file transferred from a computer, select the MUSIC (M) folder. 1. While the main screen is displayed, press and hold down the [MENU/FOLDER] button for at least two (2) seconds. 2.
4 Playback Indicators displayed during playback Bit rate (MP3, WMA), frequency (PCM) File number/Total number of files Playback speed File format Playback status File name, track name Level meters Elapsed playback time (hour : minute : second) Playback progress bar Remaining playback time (hour:minute:second) Note: With some files, the indicated elapsed playback time may not match the actual elapsed time. Also, the names of certain artists or tracks stored in the unit may not be displayed.
4 Playback Fast forwarding and fast reversing ■ Fast forwarding and fast reversing Press and hold down the [ ] button for more than one (1) second during playback to fast forward the currently-playing file. Press and hold down the [ ] button for more than one (1) second during playback to fast reverse the currently-playing file. Once the unit starts to fast forward or reverse, it will continue doing so even if you release the button. To resume normal playback, press the [PLAY] button.
5 Playback Settings 5 Playback Settings Changing the playback speed You can decrease or increase the playback speed, if necessary. This is useful if you want to listen carefully to complex musical parts or to skip quickly through unimportant parts of a recorded meeting. • To increase the playback speed: During playback, press the [INPUT/SPEED](+) button. Each press of the button will increase the playback speed. • To reduce the playback speed: During playback, press the [INPUT/SPEED](–) button.
5 Playback Settings Playing back specific sections of a track You can specify and quickly locate a desired section of a track in three ways. This can be useful if you want to skip unimportant parts during playback or to repeat playback of a particular portion of the file.
5 Playback Settings Using the A-B Repeat playback function During playback, you can specify a part of a file that you want to play repeatedly (from point A to point B). 1. During playback, press the [REC] button at the desired start point (A) for A-B Repeat playback. The start point indicator lights up. Start point indicator 2. Press the [REC] button at the desired end point (B) for A-B Repeat playback.
5 Playback Settings ■ Setting the amount of time for Phrase playback. 1. Press the [MENU/FOLDER] button while the main screen is displayed, select [PLAY MENU] → [PHRASE PLAY], then press the [REC] button. 2. Press the [PLAY]/[STOP] buttons to select the amount of time to move back the playback point in a range of 1 sec to 5 sec, in 1 sec(second) steps, then press the [REC] button. 3. Press the [MENU/FOLDER] button twice. The recorder displays the main screen.
5 Playback Settings 3. Press the [MENU/FOLDER] button twice. The unit displays the main screen. The Repeat mode indicator will appear in the lower right corner of the screen. ONE ALL RANDOM 4. Press the [PLAY] button. The unit will perform the selected Repeat playback. To cancel Repeat playback, select [OFF] in step 2. Hint: You can select a Repeat playback mode by displaying the menu screen during playback.
5 Playback Settings Setting the sound EQ (equalizer) You can set the sound EQ to adjust the overall tone of music. The function is available only when you play back files through the headphones. About the sound EQ options The recorder offers six sound EQ presets and one USER EQ option (which enables you to cut and boost five bands individually to suit your preference). The sound EQ presets include FLAT, BASS1, BASS2, POP, ROCK and JAZZ. Features of each sound EQ preset FLAT No EQ is used.
5 Playback Settings Selecting a sound EQ option 1. Press the [MENU/FOLDER] button while the main screen is displayed, select [PLAY MENU] → [SOUND EQ], then press the [REC] button. 2. Press the [ ]/[ ] buttons to select the desired sound EQ option. Select from six sound EQ presets and one USER EQ option (which enables you to customize the EQ settings). Hint: For information on how to customize the USER EQ option, refer to “Customizing the sound EQ option” on page 33. 3. Press the [REC] button.
5 Playback Settings Customizing the sound EQ option The USER sound EQ option enables you to adjust the level of five EQ bands. 1. Select “USER” as the sound EQ. Refer to steps 1 and 2 in the “Selecting a sound EQ option” section on page 32. 2. Press the [STOP] button. The 150Hz band will be selected and displayed as a black bar. 3. Press the [ ]/[ ] buttons to select the frequency band to cut or boost. The selected frequency band will be displayed as a black bar. 4.
6 Using the Tuner Function 6 Using the Tuner Function The recorder features a Tuner function that enables you to tune your musical instruments and calibrate the standard pitch (frequency). Tuning your musical instrument 1. Point the built-in stereo microphone toward the musical instrument you want to tune. Note: To tune an electric guitar or synthesizer, connect the instrument to the recorder’s [MIC/ LINE] socket.
7 Using the Metronome Function 7 Using the Metronome Function The recorder features a built-in metronome. The Metronome function enables you to play the metronome, change its tempo and/or beat, and set the metronome so that it will play during recording. Using the metronome 1. Press the [MENU/FOLDER] button while the main screen is displayed, select [METRONOME] → [START], then press the [REC] button. The metronome sound will be output from either the speaker or headphones. 2.
7 Using the Metronome Function Setting the metronome beats 1. Press the [MENU/FOLDER] button while the main screen is displayed, select [METRONOME] → [BEAT], then press the [REC] button. 2. Press the [PLAY]/[STOP] buttons repeatedly to set the beat in the range of 0/4 to 8/4, then press the [REC] button. 3. Press the [MENU/FOLDER] button twice. The unit displays the main screen.
8 Editing Files 8 Editing Files Dividing files You can divide any file recorded and stored in the MIC (A–D) folders or LINE (L) folder into two pieces. This feature enables you to remove an unwanted part of a recording while retaining the part you wish to keep. IMPORTANT Once a file is divided in two, the pieces cannot be rejoined. Be sure to backup important files on a computer or other device before you divide any file. 1.
8 Editing Files ■ File names after division Before division The file name is automatically changed. Dividing a file After division For example, if you divide a file named “001A_090911_1200.MP3”, a new file named “002A_090911_1200.MP3” will be created. If the new file has the same name as a file that already exists in the folder, the new file will keep the name, and the existing file will be renamed automatically. Note: The recorder does not display the file number or the folder type (see page 66).
8 Editing Files Using the fade in and fade out effects The recorder enables you to apply fade in and fade out effects to the files recorded in PCM (WAV) format. The fade in effect raises gradually the volume level of the beginning of the file. The fade out effect reduces gradually the volume level of the end of the file. IMPORTANT Once you apply the fade in/fade out effects, you cannot remove the effect. Be sure to backup important files on a computer or other external device before applying effects.
8 Editing Files 7. If you are satisfied with the file after auditioning and wish to save it, press the [PLAY]/[STOP] buttons to select [SAVE], then press the [REC] button. The file with the fade in effect will overwrite the original file. If you do not wish to overwrite the original file, select [CANCEL], then press the [REC] button. Note: If the internal memory (or a microSD card) does not have sufficient free space, you will be unable to apply the fade in and out effects to the file.
8 Editing Files 4. Press the [PLAY]/[STOP] buttons to select [INDEX], then press the [REC] button. 5. Press the [ ]/[ ] buttons to select [DELETE], then press the [REC] button. The unit displays the message “DELETING…” and the index marks are deleted. Note: · Deleting index marks will not delete the audio recording. · You cannot delete index marks individually. All index marks in a file will be deleted.
8 Editing Files Changing the playback sequence in a Playlist (P1–5) 1. While the main screen is displayed, press and hold down the [MENU/FOLDER] button for at least two (2) seconds, then press the [PLAY]/[STOP], [ ]/[ ] buttons to select one of the folders [P1]–[P5], then press the [REC] button. The unit displays the track list of the selected Playlist. 2. Press the [PLAY]/[STOP] buttons to select a file whose list position you want to change, then press the [REC] button for at least two (2) seconds.
8 Editing Files Removing all files from a Playlist (P1–5) You can remove all files from a Playlist. Removing all files from a Playlist will not delete the original files. 1. While the main screen is displayed, press and hold down the [MENU/FOLDER] button for at least two (2) seconds, then press the [PLAY]/[STOP], [ ]/[ ] buttons to select one of the folders [P1]–[P5], then press the [REC] button. The unit displays the track list of the selected Playlist. 2.
9 Deleting 9 Deleting Managing the Recycle Bin If you delete a file on the recorder while the Recycle Bin function is active, the file will be moved to the Recycle Bin ( ) folder temporarily so that you can restore it later if necessary. If you delete a file or folder on the recorder while the Recycle Bin function is turned off, the file will be deleted completely and you will be unable to restore it. It is recommended that you turn the Recycle Bin function on to avoid accidental erasure.
9 Deleting Displaying the Recycle Bin folder While the main screen is displayed, press and hold down the [MENU/FOLDER] button for at least two (2) seconds, then press the [PLAY]/[STOP], [ ]/[ ] buttons to select the Recycle Bin ( ) folder, and then press the [REC] button. • The Recycle Bin folder contains no files. • The Recycle Bin folder contains files.
9 Deleting Restoring a file from the Recycle Bin folder 1. While the main screen is displayed, press and hold down the [MENU/FOLDER] button for at least two (2) seconds. 2. Press the [PLAY]/[STOP], [ press the [REC] button. 3. Press the [ ]/[ ] buttons to select the desired file to restore, then press and hold down the [ALC/DELETE] button located on the side panel for at least two (2) seconds. 4. Press the [PLAY]/[STOP] buttons to select [RESTORE 1 FILE], then press the [REC] button. 5.
9 Deleting Emptying the Recycle Bin folder Caution Emptying the Recycle Bin will permanently delete all files in the Recycle Bin and the same files from the internal memory or microSD card. You will be unable to restore those files. Be sure to backup important files on a computer or other external device before emptying the Recycle Bin. Also, before emptying the Recycle Bin, make sure that the correct target (the internal memory or microSD card) has been selected. 1.
9 Deleting Deleting a selected file You can delete a single file from a folder. Caution • If you delete a file while the Recycle Bin function is turned off (see page 44), you will be unable to restore it. Be sure to check the content of a file before you delete it. • Before you proceed, make sure that the battery power is sufficient. 1. While the main screen is displayed, press and hold down the [MENU/FOLDER] button for at least two (2) seconds. 2.
9 Deleting Deleting all files from a folder You can delete all files from a selected folder. Caution • If you delete all files from the selected folder while the Recycle Bin function is turned off (see page 44), you will be unable to restore them. Be sure to check the contents of a folder before you delete the files. • Before you proceed, make sure that the battery power is sufficient. The procedure is similar to that for deleting a file. Please refer to the “Deleting a selected file” section on page 48.
9 Deleting Formatting the internal memory/microSD card (Deleting all data) Formatting the internal memory or microSD card will delete all files on the internal memory or microSD card, respectively, regardless of whether the Recycle Bin function is turned on or off. You must also format a commercially available microSD card before you use the card for the first time. Caution • If you delete files from the internal memory or microSD card, you will be unable to restore those files.
10 Using the Timer Function 10 Using the Timer Function Programming a timer The Timer function enables you to set the recorder so that it will start a microphone recording or play a file or an alarm at a specified time. Before you program a timer, make sure that the date and time on the unit have been set correctly (see page 55). 1. Press the [MENU/FOLDER] button while the main screen is displayed, press the [PLAY]/[STOP] buttons to select [COMMON MENU] → [TIMER & ALARM], then press the [REC] button.
10 Using the Timer Function ■ Setting the WEEKLY timer (Available only when [WEEKLY] REPEAT is selected) 1. Press the [PLAY]/[STOP], [ ]/[ ] buttons to highlight a day of the week, then press the [REC] button to check the corresponding box. SUN: Sunday; MON: Monday; TUE: Tuesday; WED: Wednesday; THU: Thursday; FRI: Friday; SAT: Saturday; STORE: Confirm Note: You can select multiple days of the week. 2. Press the [PLAY]/[STOP], [ ]/[ then press the [REC] button.
10 Using the Timer Function ■ Setting the playback SOURCE (Available only when [PLAY] is selected for ACTION) 1. Press the [PLAY]/[STOP] buttons to select [BEEP] (to play a beep sound) or [FILE] (to play a file). BEEP: The unit plays a beep sound. FILE: The selected file will play. When you select “FILE,” the unit displays the list screen. Select a file to play (excluding files in Playlists or in the Recycle Bin).
10 Using the Timer Function ■ Completing the timer settings 1. Press the [PLAY]/[STOP] buttons to select [STORE], then press the [REC] button. The programmed timer settings are confirmed, and the unit displays the [COMMON MENU] screen. 2. Press the [MENU/FOLDER] button twice. The unit displays the main screen. Note: · Initializing the calendar (date and time) will reset all timer settings to “OFF.
11 Preference Settings 11 Preference Settings You can set the preference settings to make it easier to use the recorder in various environments and circumstances. Setting the current date and time After you set the date and time, the recorder will automatically record the time and date of recording with each file. Since the name of recorded files includes the recording date and time, Yamaha recommends that you set the date and time accurately. 1.
11 Preference Settings Setting the beep sound You can set the recorder so that it will make a beep sound when you operate the buttons or if you make an operational error. 1. Press the [MENU/FOLDER] button while the main screen is displayed, press the [PLAY]/[STOP] buttons to select [COMMON MENU] → [BEEP SOUND], then press the [REC] button. 2. Press the [PLAY]/[STOP] buttons to select [ON], then press the [REC] button. 3.
11 Preference Settings Setting the Backlight function When the Backlight function is turned on, the LCD backlight lights up each time you press a button or switch on the unit. 1. Press the [MENU/FOLDER] button while the main screen is displayed, press the [PLAY]/[STOP] buttons to select [COMMON MENU] → [BACKLIGHT], then press the [REC] button. 2. Press the [PLAY]/[STOP] buttons to select the desired time to light up the backlight, then press the [REC] button. OFF: The backlight will not light up.
11 Preference Settings Initializing the menu settings Initializing the recorder settings will restore all menu settings (excluding the date and time setting) to the factory default. Note: Initializing the recorder settings will not delete any data on the internal memory or microSD card. For information on initializing the internal memory or a microSD card, refer to page 50.
12 Using the Recorder with a Computer 12 Using the Recorder with a Computer You can transfer audio files stored on the internal memory or microSD card to a computer by connecting the recorder to the computer. Transferred files are compatible for playback with Windows Media Player and iTunes, and can be edited using the included “Cubase AI” DAW software. You can also transfer audio files from a computer to the recorder for playback.
12 Using the Recorder with a Computer Disconnecting the recorder from your computer ■ Windows: 1. Click on the taskbar at the bottom right of the Windows screen, then click [Safely remove USB Mass Storage Device]. 2. After the computer displays the message shown on the right, remove the USB plug. ■ Macintosh: 1. Drag and drop the drive icon [PRC24] or [PRC24SD] of the recorder on the desktop to the Trash Can. 2.
12 Using the Recorder with a Computer If the “Device Manager” window does not display the correct items: Follow the steps below. 1. Exit (quit) all running applications. 2. Disconnect all external USB devices (excluding a properly working mouse and keyboard), then connect only the recorder. 3. If the computer features multiple USB terminals, use a different USB terminal to connect the recorder. 4.
12 Using the Recorder with a Computer 3. Double-click to open [PRC24] or [PRC24SD]. The system displays the recorder’s folders. Note: If the system displays the “What do you want Windows to do?” panel, click to select [Open folder to view files], then click [OK]. The system will display the recorder’s folders.
12 Using the Recorder with a Computer ■ Files are stored in the following folders on the internal memory or microSD card. • MIC(A–D) / MIC_(A–D)_SD These folders store audio files (in MP3 or WAV format) recorded by the unit. Note: · Do not move the files to a different folder. For example, do not move a file in the A folder to the B folder. Otherwise, you will be unable to play the file.
12 Using the Recorder with a Computer • DATA This folder stores data files (of MS Excel, MS Word, etc.) and enables you to use the recorder as a USB flash drive or a microSD card reader/writer (removable disk). Note: · The recorder will not play any audio or music files that are placed in this folder. · This folder will be recognized only by a connected computer. The recorder will not display this folder on its screen.
12 Using the Recorder with a Computer ■ POCKETRAK C24 folder structure Internal memory (microSD) MIC (A-D) folders: These folders store audio files recorded via the recorder’s microphone, such as conference meetings, lectures, and musical performances. Each folder accommodates up to 199 files. LINE (L) folders: These folders store audio files recorded from external devices via the line connection. Each folder accommodates up to 199 files. First layer Second layer PLIST1.M3U PLIST2.
12 Using the Recorder with a Computer About the file naming rules The recorder automatically names the recorded files, following the file naming rules as shown below. The recorder does not display the file number and the folder type. You can view them only via a connected computer. 001A_091121_1200.
12 Using the Recorder with a Computer Transferring audio files from the recorder to a computer ■ Windows: 1. Connect the recorder to a computer. 2. Open [My Computer] from the [Start] menu. 3. Double-click the [PRC24] or [PRC24SD] folder. 4. Double-click the folder that contains the file that you wish to load to your computer. 5. Copy the file to the desired location. ■ Macintosh: 1. Connect the recorder to a computer. 2.
12 Using the Recorder with a Computer Copying audio files to a CD-R You can copy audio files (that were recorded on the recorder) to a CD-R disc by using Windows Media Player. Please visit the Microsoft website for information on how to obtain Windows Media Player. http://www.microsoft.com/windows/windowsmedia/ Note: · This section uses Windows XP and Widows Media Player 11 as examples. · To copy audio files to a CD-R disc, you must have a CD writer, such as a CD-R/RW drive. 1.
13 Using the Recorder as a Music Player 13 Using the Recorder as a Music Player If you install Windows Media Player or iTunes on your computer and transfer music files to the connected recorder, you can use the unit as a music player. Please visit the Microsoft website for information on how to obtain Windows Media Player. http://www.microsoft.com/windows/windowsmedia/ Note: · This section uses Windows XP and Widows Media Player 11 as examples.
13 Using the Recorder as a Music Player 3. Click [Rip] in the menu bar. Click Check Click 4. Insert a music CD into the computer’s CD-ROM drive. Note: If your computer has access to the Internet, the system will automatically obtain and display music information related to the CD. 5. Check the box for each song that you wish to rip to your computer, then click [Start Rip]. The system starts ripping the CD.
13 Using the Recorder as a Music Player Transferring music files to the Recorder (Sync function) You can transfer audio files (ripped from a music CD to a computer) to the recorder for playback. For information on how to rip a music CD, refer to the “Ripping CDs (Creating compatible music files from music CDs)” on page 69. 1. From the [Start] menu, select [All Programs], then click [Windows Media Player] to start Windows Media Player. 2. Click [Sync] in the menu bar. 3.
13 Using the Recorder as a Music Player 6. Drag and drop the desired music files from the Library pane in the left column of the window to the Sync List pane in the right column of the window. Click 7. Click [Start Sync]. The files will be transferred to the recorder.
14 Installing Cubase AI 14 Installing Cubase AI The recorder ships with a DVD disc that contains the DAW software “Cubase AI.” You can use this software to edit and mix audio files. This section explains how to install Cubase AI. Refer to the PDF documentation supplied with Cubase AI (Getting Started and Operation Manual, opened from the “Help” menu). Note: You can not copy audio files to a CD-R disc by using Cubase AI. To copy audio files to a CD-R disc, refer to page 68.
15 Appendix 15 Appendix Error messages The following table explains the error messages that you may see during operation of the recorder. Unit status or function Low battery Error message LOW BATTERY! REPLACE BATTERY The battery is exhausted. Replace the battery with a new one. MEMORY FULL! The internal memory or microSD card does not have sufficient free space for recording. FILE FULL! You attempted to record more files than the maximum number of files allowed for the selected folder.
15 Appendix Unit status or function Error message Description CANNOT FADE IN! FILE TOO SHORT! The file is too short in duration (ten seconds or less) to apply the fade in effect. CANNOT FADE OUT! FILE TOO SHORT! The file is too short in duration (ten seconds or less) to apply the fade out effect. CANNOT FADE IN! READ-ONLY FILE! You attempted to apply the fade in effect to a file other than a PCM (WAV) file. You cannot apply the fade in effect to any files other than PCM (WAV) files.
15 Appendix Unit status or function Playlists Error message Description PLAYLIST FULL! TOO MANY FILES! You attempted to assign a 100th file to one of the Playlists (PLIST). PLAYLIST CAN BE EDITED ONLY IN MUSIC FOLDER You attempted to select a file in a folder other than the MUSIC (M) folder and assign it to one of the Playlist (PLIST). TOO MANY FILES FOR A PLAYLIST! You attempted to assign more than 100 files to one of the Playlists (PLIST).
15 Appendix No sound. Possible cause The volume is turned down too low. Corrective action Use the [VOLUME] (+/–) button to adjust the volume level. Files in the MIC (A–D), LINE or Recycle Bin ( ) folders cannot be played. Possible cause The file name is wrong. Corrective action If you change the file name on a computer, then move the file back to the original folder, you cannot play the file on the unit. Transfer the file to the MUSIC (M) folder to play it.
15 Appendix A file cannot be divided. Possible cause The internal memory or the microSD card may have insufficient free space. Corrective action Erase unnecessary files (see page 48). Possible cause The file is too short to divide. Corrective action The minimum file length required for the file division operation varies with the recording mode (see page 38). A file cannot be erased. Possible cause The attribute of the file is set to “read only.
15 Appendix The file transfer speed (from the computer to the unit) is slow. Possible cause The unit is connected to a USB1.1 terminal on the computer. Corrective action Connect the unit to a USB2.0 High Speed terminal. When the unit is connected to the computer, the unit does not display the “Connected” icon. Possible cause The unit is not connected to the computer correctly.
15 Appendix The date and time are displayed incorrectly. Corrective action Set the correct date and time (see page 55). Deleting files does not increase the amount of free space. Possible cause The Recycle Bin function is turned on. Corrective action Empty the Recycle Bin (see page 47). The timer does not work properly. (The timer recording failed.) Possible cause The calendar was initialized. Corrective action Set the calendar (date and time) (see page 55).
15 Appendix FAQ Q: Why do I hear a rustling noise in the recordings? A: A rustling noise may be recorded if you move the unit during recording, or even if you move your fingers while holding the unit when recording. If possible, try not to move the unit during recording. Q: How can I transfer the recordings onto tapes or MDs? A: Use a standard audio cable (with 3.5mm mini plugs) to connect the unit to your tape recorder or MD recorder, then dub the recordings to a tape or MD.
15 Appendix Specifications Supported OS Supported media Windows 7, Vista, XP Professional/Home Edition Mac OS X 10.4, 10.5, 10.6 microSD/SDHC card 96kHz 24bit 16bit Playback format Approx. 1hr. Approx. 1hr.50min. Approx. 2hr. 96kHz Approx. 1hr.25min. 88.2kHz Approx. 1hr.30min. 48kHz Approx. 2hr.50min. 44.1kHz MP3 Recording format 48kHz 44.1kHz PCM Recording mode and estimated available recording time (with the internal 2GB memory) 88.2kHz Approx. 55min. Approx. 3hr. 320kbps Approx.
15 Appendix Connectors USB, Stereo headphones 3.5-mm mini, Stereo microphone (line input) 3.5-mm mini, microSD card slot Operating temperature +5°C – +35°C (+41°F – +95°F) Output (headphones) 10mW + 10mW (at 16Ω load) Power supply “AAA/LR03” alkaline battery (1) or “AAA” nickel-metal hydride battery (1) Alkaline battery: Battery life for recording MP3 64kbps: Approx. 26 hours, PCM 44.1kHz 16bit: Approx.
Appendix Index Symbols / button ....................................... 5 A A-B Repeat playback ................................ 28 Alarm....................................................... 51 ALC (Auto Level Control) ......................... 13 ALC/DELETE button ................................... 5 Audio cable........................................ 11, 81 Audio files ................................................ 67 Auto Divide.............................................. 20 Auto Power Off ....
Appendix P T PCM (WAV) ......................................... 7, 12 Pitch ........................................................ 34 PLAY button............................................... 4 Playback .................................................. 23 Playing back files ................................. 23 Repeat playback .................................. 29 Using the A-B Repeat playback function.. 28 Using the Phrase playback function ..... 28 Using the Skip playback function.........
