Owner's Manual

ManualsBrandsYamaha ManualsProjectorsPMT-L11/H15

Digital Cinema Projector

Ceiling Bracket

PMT-L11 (for Low Ceilings)

PMT-H15 (for High Ceilings)

Installation Manual

Be sure to read this manual thoroughly

before using this bracket. After you have

read this manual, retain it for future

reference.

When installing the projector using this

bracket, all installation work must be

performed by a qualified contractor or

dealer personnel. The customer must

never attempt to perform this installation

work.

Packing List .................................................................................................................................. 4

Names of Parts ............................................................................................................................. 5

Dimensions of Parts .................................................................................................................... 7

Guidelines for the Projector Installation Position and Screen Size ........................................ 8

Installation Examples ................................................................................................................ 10

Installing the Projector .............................................................................................................. 11

Adjusting the Projection Angle................................................................................................. 14

Specifications ............................................................................................................................. 16

Contents

(PMT-L11)

(PMT-H15)

English

Français

Deutsch

Svenska

Italiano

Español

Nederlands

11PMT_TOC_E 5/29/1, 9:16 AM1

Summary of content (16 pages)

PAGE 1
English Digital Cinema Projector Ceiling Bracket Deutsch Installation Manual Svenska Be sure to read this manual thoroughly before using this bracket. After you have read this manual, retain it for future reference. Italiano When installing the projector using this bracket, all installation work must be performed by a qualified contractor or dealer personnel. The customer must never attempt to perform this installation work.
PAGE 2
Safety Instruction 1. Always follow the instructions set forth in this manual when installing the projector using this bracket. Improper or inadequate installation could cause the projector to fall and injure someone. 2. The installation must be secure enough to bear the weight of the projector, the ceiling bracket, and other hardware indefinitely, and must also be secure enough to withstand vibration. Inadequate installation could cause the projector to fall and injure someone. 3.
PAGE 3
9. Never hang from the projector or the ceiling bracket. English Hanging from the projector or the ceiling bracket could cause the projector or the ceiling bracket to fall and injure someone. 10. Do not install the projector in a location near an air conditioning vent or in a location subject to vibration. 11. Do not install the projector in a location that is subject to high levels of dust or humidity.
PAGE 4
Packing List Confirm that all of the parts are present. PMT-L11 PMT-H15 Ceiling bracket x 1 Ceiling bracket x 1 Adjustment pole locking screws (M5) x 4 Common Components (The following parts are provided with each bracket.
PAGE 5
English Names of Parts PMT-L11 Français Horizontal angle adjustment screws Deutsch Ceiling bracket Svenska Mounting guide pin Español Vertical angle adjustment screws (There are also screws on the opposite side.) Italiano Tilt angle adjustment screws (There are also screws on the opposite side.
PAGE 6
PMT-H15 Ceiling bracket Horizontal angle adjustment screw (four in total) Height locking screw Height adjustment pole Mounting guide pin Tilt angle adjustment screws (There are also screws on the opposite side.) Vertical angle adjustment screws (There are also screws on the opposite side.
PAGE 7
5/29/1, 9:16 AM 140 mm 5-1/2 inch 175 mm 6-7/8 inch Ø9 mm Ø3/8 inch (hole) Nederlands 7 Ø10 mm Ø3/8 inch (hole) Ø10 x 13 mm Ø3/8 x 1/2 inch (elliptical hole) [Top View] Ø9 x 13 mm Ø3/8 x 1/2 inch (elliptical hole) with the DPX-1 installed (lens center) 226 mm 8-7/8 inch 200 mm 7-7/8 inch 10˚ 10˚ Ø10 mm Ø3/8 inch (hole) 201.65 mm 7-15/16 inch 1-3/16 inch 30 mm 35-5/16 to 57-3/4 inch 896.65 to 1466.65 mm 777 to 1347 mm 30-9/16 to 53 inch Ø8.
PAGE 8
Guidelines for the Projector Installation Position and Screen Size • The relationship between the projection distance and the screen size is shown below. Use these values as guidelines for determining the installation position.
PAGE 9
PMT-H15 Height Adjustment English The height adjustment pole for the PMT-H15 has holes spaced 3 cm apart that can be used to adjust the height. When the bracket is shipped from the factory, the pole is set at the shortest height. Follow the procedure described below to adjust the pole to the appropriate height. For details on the appropriate height, refer to “Guidelines for the Projector Installation Position and Screen Size” on page 8. Français [Adjustment Procedure] 1 Remove the safety pin.
PAGE 10
Installation Examples When the ceiling is made of wood 1 Drill matching holes through the reinforcing plate and the ceiling in the proper locations and then pass bolts through the holes. 2 Tighten the bolts to secure the reinforcing plate to a ceiling beam. Washer Reinforcing plate Ceiling beam Cautions • Make sure that the reinforcing plate is strong enough to bear the weight of the projector and the ceiling bracket. • Use M8 bolts (commercially available).
PAGE 11
1 English Installing the Projector Mount the projector mounting adapter onto the projector. Projector mounting screws (M6, pan head) Français Align the holes in the mounting adapter with the holes in the bottom of the projector, and then use the four projector mounting screws (M6, pan head) provided to securely attach the mounting adapter to the projector. Projector mounting adapter Deutsch Svenska Bottom of the projector Caution 2 Attach the safety wire.
PAGE 12
3 Install the ceiling bracket on the ceiling. First hand-tighten the four nuts, determine the position, and then tighten the nuts securely. (PMT-L11) (PMT-H15) Pr dir ojec ec tio tio n n Pr dir ojec ec tio tio n n Caution • Use M8 bolts (commercially available) to install the ceiling bracket. Using any bolts other than M8 bolts could cause the projector to fall.
PAGE 13
5 Install the safety brackets. English Align the safety brackets so that the mounting guide pin fits into the hole, and then use the four safety bracket mounting screws (M4, pan head) to secure the brackets. (Use two screws on the left side and two screws on the right.) (PMT-L11) Français Safety bracket mounting screw (M4, pan head) Deutsch Safety bracket Svenska 6 Temporarily secure the projector mounting adapter.
PAGE 14
Adjusting the Projection Angle Prior to Adjustment • After reading the owner’s manual for the projector, turn the projector on, and project an image. • Check the INSTALLATION item in the SETUP menu, and set the installation status. If projecting from the front of the unit, select “FRONT/CEILING;” if projecting from the rear of the unit, select “REAR/ CEILING.” • Select a projection size using the zoom feature, and then adjust the angle. 1 Adjust the horizontal angle.
PAGE 15
2 Adjust the vertical angle. Français Top English Adjust the projector so that the projected image is centered vertically on the screen, and then tighten the four vertical angle adjustment screws. 15˚ 15˚ Deutsch Maximum angle of adjustment: ±15˚ Bottom (PMT-L11) Svenska Vertical angle adjustment screws (There are also screws located on the opposite side.) Adjust the tilt angle.
PAGE 16
Specifications Product Name Digital Cinema Projector Ceiling Bracket Model No.