Installation Guide/Installationshandbuch/Manuel d’installation SPECIAL NOTICES Deutsch English • Certain CD-ROMs are copy-protected. Yamaha makes no representations or warranties with regard to any problems while attempting to copy the CD-ROM(s) or software and cannot be held responsible for the results of attempts to copy the data. • The software and this Installation Guide are exclusive copyrights of Yamaha Corporation.
Français Deutsch English • Das Kopieren der Software und die Reproduktion dieser Anleitung, in welcher Form auch immer, in Teilen oder als Ganzes, sind nur mit schriftlicher Genehmigung des Herstellers erlaubt und sonst ausdrücklich verboten. • Yamaha leistet keinerlei Garantie hinsichtlich der Benutzung des Programms und der zugehörigen Dokumentation und übernimmt keine Verantwortung für die Ergebnisse der Benutzung dieser Anleitung oder des Programms.
Contents Important Notices about the CD-ROM.............................................4 Operating System (OS) ..........................................................................4 CD-ROM Installation Procedure .............................................................4 For Windows Users...........................................................................5 CD-ROM Contents..................................................................................
Important Notices about the CD-ROM Operating System (OS) The applications in this CD-ROM are provided in versions for both Windows and Macintosh operating systems. The installation procedure and the applications themselves differ depending on the operating system that you are using. Please refer to the appropriate installation instructions. For Windows, see page 5~25. For Macintosh, see page 27.
For Windows Users CD-ROM Contents Software for Windows is included on two CD-ROMs (only TOOLS for i88X/mLAN16E is included with the mLAN 16E,). Install TOOLS for i88X/mLAN16E first. ● TOOLS for i88X/mLAN16E Acroread_ mLAN_ Application Name Contents Acrobat Reader*1*2 Enables you to view each PDF manual for the applications. • Open the online help by pressing the [F1] button on the computer.
■ About Open Plug-in Technology You can start mLAN Graphic Patchbay as either stand-alone software or as a plug-in for an Open Plugin Technology compatible application. Open Plug-in Technology (OPT) is a new software format that enables you to control MIDI devices from a music software sequencer. For example, OPT enables you to start and operate various parts of your music system, such as Plug-in Board editors and mixing control editors, directly from an OPT-compatible sequencer.
These are the total system requirements, including the audio sequencer, mLAN software and the plug-in effects. OS : Windows XP Professional/XP Home Edition Computer : Intel Pentium or Celeron family processor, with the S400 (400 Mbps) IEEE1394 (FireWire) or i.Link terminal (*1). Hard Disk : Free disk space of 250 MB (i88X)/50 MB (mLAN16E) or more; highspeed hard disk (*2) ● Recommended system (*3) • Connecting a single mLAN device to a computer peer-to-peer: Computer : 2.
Software Installation For instructions on how to install the software other than one referred to below, see page 5 in the section “CD-ROM Contents.” Uninstall (removing the installed application) You can remove the installed application software.Select [START] (➝ [Settings]) ➝ [Control Panel] ➝ [Add/Remove Programs] ➝ [Install/Uninstall], then select the application to be removed and click [Add/ Remove...]. Follow the on-screen instructions to uninstall the application.
mLAN Tools 2.0 and mLAN Applications for YAMAHA mLAN Tools 2.0 software includes a driver that enables you to connect mLAN devices to a computer. mLAN Applications for YAMAHA enables audio and MIDI signals to be transferred between a computer and mLAN devices via mLAN cables. This software enables you to connect the i88X, mLAN16E, or 01X to a computer via mLAN. 01X users should uninstall the older version of the mLAN software before installing this software. (Refer to the 01X Installation Guide.
6 Go to [System] ➝ [Hardware] ➝ [Driver Signing] ➝ [File Signature Verification], and check the radio English button to the left of “Ignore -Install all files, regardless of file signature” and click [OK]. • After completing the installation, make sure to restore the original setting if necessary. 7 Check that no “!” or “x” marks appear next to “IEEE 1394 Bus host controllers” (in [System] ➝ [Hard- ware] ➝ [Device Manager]). If one of these marks is shown, the mLAN (IEEE 1394/i.
8 Click [OK] to close the System Properties window, then click the Close button ([X]) at the top right of the window to close the Control Panel. Installation of mLAN Tools 14 Click [Next]. The display for installing mLAN Tools appears. 9 Exit from any open applications and close all 15 Click [Next]. The “Destination Directory” open windows. 10 Insert the included CD-ROM into the CDROM drive.
Installation of mLAN Applications for YAMAHA (mLAN Software) When the mLAN Tools 2.0 installation is complete, the computer automatically displays a window that enables you to start the installation of Applications for YAMAHA. Click [Next]. mLAN Driver initial settings After you restart the computer, complete the mLAN driver initial settings. Select [ON] in mLAN Manager to activate the mLAN driver (page 14). 21 A dialog box prompts you to turn on the power to the mLAN device.
24 The “Make the driver initial settings” dialog mLAN MIDI Port initial settings box is displayed. Click [OK]. 28 The computer automatically displays the • During Steps 25 and 26, and Steps 28 and 29, the computer displays a window indicating that you are now making the initial settings for each driver. This window also indicates the number of times the “Found New Hardware Wizard” will be displayed during the procedure. Unless you wish to cancel installation, do not close this window.
Confirming the installation Task bar (mLAN Manager) If the installation is successful, an mLAN icon (mLAN Manager) is added to the task bar. To call up the menu, right-click on the icon. When using mLAN, right click on the mLAN icon (mLAN Manager) in the task bar and select “ON” (start mLAN). • To use mLAN connections, after you start the computer, right-click the mLAN icon (mLAN Manager) in the Task bar, then select [ON] to activate mLAN connections.
Changing settings after installation The mLAN-related settings can be changed after installation from the mLAN Driver Setup window. mLAN Driver Setup (Right-click the mLAN icon in the task bar ➝ DriverSetup) This window lets you check and change the mLAN settings for receiving/transmitting data. Make sure to close any application (DAW, etc.) using the mLAN connection before making changes.
● Types of latency in an mLAN network Audio latency (msec) Audio latency is determined by the basic latency (selected in the mLAN Driver Setup window) and Preferred Buffer Size (specified in the ASIO mLAN Control Panel) (see below). MIDI latency (msec) The MIDI latency value varies with the mLAN driver version. For information on MIDI latency of your mLAN driver version, refer to the file called “MIDI_Latency.txt.” Windows: Select [Program files | mLAN Tools | YAMAHA | MIDI_Latency.txt].
e Status If you are using mLAN Auto Connector, this parameter indicates the current data (MIDI/ Audio) reception status (from the mLAN device to computer) of the mLAN connection. If there is an error in transmission, the computer displays an error message. If you are using mLAN Graphic Patchbay, refer to the Graphic Patchbay Online Manual for information on the error messages. Blue ....... Data is being properly transmitted. Yellow ... Only one type of data (MIDI or audio) is being received. Red ........
If the computer’s system sound is output to mLAN audio channels: The computer’s system sound (such as an alarm sound) will be output to mLAN audio channels if the following settings are made: • The WDM driver is selected in mLAN Auto Connector or mLAN Graphic Patchbay. • mLAN WDM driver (mLAN Audio Out/In 01) has been selected for the Windows system audio device. Follow the steps below to prevent the system sound from being output to mLAN audio channels.
Connecting a Computer to an mLAN device via mLAN • If you use Auto Connector after you make connections in mLAN Graphic Patchbay, the connections made in mLAN Graphic Patchbay will be cancelled. This section describes the procedure for connecting a computer to a single mLAN device peer-to-peer in mLAN Auto Connector. In mLAN Auto Connector, you can easily connect an mLAN device by setting up the wordclock and the number of audio I/O channels.
q Nickname i [ASIO/WDM] button This field indicates the nickname of the connected i88X. To change the nickname, refer to “Node Information” in the mLAN Graphic Patchbay Online Manual. Select the ASIO or WDM driver as appropriate for your environment. w Model Name This parameter enables you to select an mLAN device to which you wish to make an mLAN connection in a multiple mLAN device network.
Connecting the mLAN16E (MOTIF ES) q e w r t y u i English o !1 !0 !2 q Nickname t Sample Rate This field indicates the nickname of the connected mLAN16E. To change the nickname, refer to “Node Information” in the mLAN Graphic Patchbay Online Manual. This parameter enables you to specify the sampling frequency (wordclock frequency).
o PC ← MOTIF ES This parameter enables you to specify the number of channels of audio data input into the computer from the mLAN16E’s output. • The number of audio transmission channels and MIDI ports varies on different mLAN16E-compatible devices. • For more information on audio and MIDI connections for a MOTIF ES with an mLAN16E installed, refer to “System Examples” in the mLAN16E Owner’s Manual. !0 [Connect] button English Click this button to connect the mLAN16E to the computer via mLAN.
Hints when using audio data (Windows) For optimum use of the audio functions, we recommend you make the following settings. These settings minimize possible audio problems, such as drop outs, glitches and noise. • Set the DMA mode (high-speed transfer mode) of the hard disk to on To set the DMA mode, select [Control Panel] ➝ [System] (➝ [Hardware]) ➝ [Device Manager], then change the setting from [Disk drives] or [Hard disk controllers].
When the settings of the mLAN Auto Connector or Driver Setup cannot be changed, or when the program mLAN Applications for YAMAHA/mLAN Tools 2.0 cannot be uninstalled. The message below may sometimes appear when changing the settings with mLAN Auto Connector and Driver Setup or when uninstalling. English When using the mLAN driver with a program such as an audio sequencer, the settings in mLAN Auto Connector and Driver Setup cannot be changed, and mLAN Applications for YAMAHA/mLAN Tools 2.
Installing the Plug-in Effect (For i88X Users) 8 Click [Next]. In the window that appears, you 1 Double-click on the “VST_” folder. Various files including “Setup.exe” will be displayed. can select the “VstPlugins” folder to which the plug-in effect will be installed. 2 Double-click on “Setup.exe.” “Welcome to the installShield Wizard” window will be displayed. • In order to be able to use the VST plug-in software with the SQ01, it is necessary to check “Program Files\YAMAHA\VstPlugins.
Using the Installed Plug-in Effect on another host application Uninstall (removing the installed plug-in effect) 1 Select [Start] ➝ [(All) Programs] ➝ Even after you’ve installed the plug-in effect, if you intend to use it with another VSTcompatible host application, you will need to manually copy the effect plug-in module to the “VstPlugins” folder specified by the host application. [YAMAHA VST Plugins] ➝ [(Plug-in Effect name)] ➝ [Setup]. A “Welcome” window appears.
For Macintosh Users CD-ROM Contents Software for Macintosh is included on two CD-ROMs (for the mLAN 16E, only TOOLS for i88X/ mLAN16E is included). Install TOOLS for i88X/mLAN16E first. ● TOOLS for i88X/mLAN16E Acroread_ mLAN_ OMS_ Application Name Contents Acrobat Reader*1*2 Enables you to view each PDF manual for the applications. • Open the online help by pressing the [F1] button on the computer.
Folder Name*3 English Mac OS 9 VST_ Application Name Contents 01X Channel Module*1 This software reproduces the EQ and Dynamics effects built into each channel of the YAMAHA Digital Mixing Studio 01X, and uses the processing power of the computer for the effects. You can use the Dynamics and 4-band EQ functions (that can be also found on Yamaha Digital Mixing consoles) as effects software. You can also import the 01X settings, thus reproducing the songs created on the 01X.
System Requirements for i88X/mLAN16E Software The system requirements below are necessary for using the included software. • The system requirements below may differ slightly depending on the particular operating system. ● i88X/mLAN16E (including the requirements for mLAN Tools 2.0/mLAN Applications for YAMAHA) These are the total system requirements, including the audio sequencer, mLAN Tools 2.0/mLAN Applications for YAMAHA and the plug-in effects. OS : Mac OS 9.
● Plug-in Effect (included only with i88X) OS • Up to two PCI or PC cards can be used. However, you can use only one card at a time. If you are using an IEEE1394 interface built into the computer, you can use only one IEEE1394 PCI or PC interface card. : Mac OS 8.6 through 9.2 Mac OS X 10.2 • When using a PowerBook under battery power, go Apple menu ➝ [Control Panel] ➝ [Energy Saver] ➝ [Advanced Settings] (Settings for: Battery), and remove the check from the “Allow processor cycling.
Preparing to install •When using the mLAN connection, make sure to disable any energy saving features on the computer (such as Suspend, Sleep, Standby or Pause). When using the virtual memory, turn it off, then restart the computer. • If you are using the S200 data transfer rate standard (check the rear panel of your particular device, or refer to the specifications in the owner’s manual), make sure to uninstall the old version of mLAN Tools beforehand.
13 Confirm that “Easy install” is selected and click “Install.” At the confirmation message that appears, click “Continue.” 14 If a message “OMS Folder cannot be found in the system folder” or the like appears, after finishing the installation, copy the file “mLAN OMS Driver” (located in “Into OMS Folder” of the “mLAN Tools” folder in the installation destination) to the system folder “OMS Folder.” 15 The message prompting to search the ASIO Drivers folder is shown. Click [OK].
Connecting a Computer to an mLAN device via mLAN • If you use Auto Connector after you make connections in mLAN Graphic Patchbay, the connections made in mLAN Graphic Patchbay will be cancelled. This section explains how to connect a computer to a single mLAN device peer-to-peer in mLAN Auto Connector. In mLAN Auto Connector, you can easily connect an mLAN device by setting up the wordclock and specifying the number of audio I/O channels.
e [Update] button i Mac ← i88X Clicking this button updates the information on the mLAN devices connected to the mLAN network. Use this button when you add an mLAN device to the network while mLAN Auto Connector is running. This parameter enables you to specify the number of channels for audio data that are input at the i88X’s INPUT 1-8 jacks (analog), DIGITAL STEREO COAXIAL or OPTICAL IN jack (digital), or ADAT IN jack (ADAT) and output to the computer.
q Nickname • For more information on audio and MIDI connections for an MOTIF ES with an mLAN16E installed, refer to “System Examples” in the mLAN16E Owner’s Manual. This field indicates the nickname of the connected mLAN16E. To change the nickname, refer to “Node Information” in the mLAN Graphic Patchbay Online Manual. o [Connect] button Click this button to connect the mLAN16E to the computer via mLAN.
Setting up OMS • If you are using mLAN on your Macintosh with an optionally installed IEEE 1394 (FireWire) interface card, recreate a new Studio Setup by OMS Setup included in the installation CD-ROM. For details, refer to the OMS manual. 1 Double-click on the “OMS” folder and “OMSSetup for YAMAHA” folder. The “i88X-mLAN,” “MOTIF-ES-mLAN” and “mLAN Generic 16 ports” files appear. Copy this to the hard disk on your computer.
• The port numbers in the “mLAN Generic 16 ports” Studio Setup correspond to the numbers indicated in the “Connector Name” column in mLAN Graphic Patchbay. For more information on Graphic Patchbay, refer to the Graphic Patchbay Online Manual. • After the OMS studio setup above has been completed, your computer will recognize only Yamaha mLAN (MIDI) devices.
Plug-in Effect 1 Double-click on the “Mac OS 9” folder. “VST_” 5 Click [Continue]. In the window that appears, folder will be displayed. you can select the “VstPlugins” folder to which the plug-in effect will be installed. 2 Double-click on the “VST_” folder. “VST Plugin Installer.” will be displayed. 3 Double-click on “VST Plugin Installer.” English A window for selecting plug-in effects will be displayed.
Display Messages Page 19, 33 The settings of the mLAN Driver could not be changed. 1) If an application that uses the driver is currently active, close it first, then change the settings. 2) There is not enough resource memory. 24 Failed to initialize the mLAN settings because the application “mLAN Start” is not running. Select “ON” from the menu of “mLAN Manager” application. 14 Can’t connect the i88X (or mLAN16E)’s mLAN audio output plug to the computer’s mLAN audio input plug.
Troubleshooting If you encounter a problem... If you hear no sound or a strange sound, first check the items described below and take appropriate action. If the problem persists, consult your Yamaha dealer. English ■ Unable to communicate via mLAN • Has the driver been installed? ................................................................................ See page 12. • Is the mLAN cable properly connected? Check the connection; disconnect the mLAN cable once, then insert it again.
• Make sure that you set up the wordclock correctly. Also, make sure that one node is assigned as master and the other nodes are assigned as slaves. ........... Refer to “mLAN Connection Settings” in the mLAN Graphic Patchbay Online Manual. ■ The computer processing speed is too slow. ■ The computer’s CPU meter indicates a heavy processing load. ■ Playback response is delayed.
■ A connected mLAN device is not recognized. • Refresh the information by selecting [View], then [Update] in the Menu bar. If the device is still not recognized, turn mLAN Manager off, then turn it on, then select [Update] to latest information. ........... Refer to “Starting mLAN Graphic Patchbay” in the mLAN Graphic Patchbay Online Manual. ■ Launching mLAN Graphic Patchbay or updating to the latest information takes a while.
Inhalt Wichtige Hinweise zur CD-ROM ...................................................... 4 Betriebssystem (OS)............................................................................... 4 Installation der CD-ROM......................................................................... 4 Für Windows-Anwender ................................................................... 5 Inhalt der CD-ROM .................................................................................
Wichtige Hinweise zur CD-ROM Betriebssystem (OS) Die Anwendungen auf dieser CD-ROM werden in einer Version für Windows und in einer Version für das Macintosh-Betriebssystem bereitgestellt. Der Installationsvorgang und die Anwendungen für die beiden Betriebssysteme sind nicht identisch. Befolgen Sie daher die Installationsanleitung Ihres Betriebssystems. Anweisungen zu Windows finden Sie auf Seiten Seite 5–25. Anweisungen zu Macintosh finden Sie auf Seite Seite 27.
Für Windows-Anwender Inhalt der CD-ROM Die Software für Windows befindet sich auf zwei CD-ROMs (lediglich TOOLS for i88X/mLAN16E ist im Lieferumfang der mLAN16E enthalten). Installieren Sie als Erstes TOOLS for i88X/mLAN16E. ● TOOLS for i88X/mLAN16E Ordnername Acroread_ mLAN_ Name der Anwendung Inhalt Acrobat Reader*1*2 Dient zum Anzeigen der Programmanleitungen im PDF-Format. • Drücken Sie die Taste [F1] der Computertastatur, um die Online-Hilfe zu öffnen.
■ Über die Open-Plug-in-Technik Sie können mLAN Graphic Patchbay entweder eigenständig oder als Plug-in innerhalb eines anderen Programms verwenden, das mit der Open-Plug-in-Technik kompatibel ist. Die „Open-Plug-in-Technik“ (OPT) ist ein neues Software-Format, das die Steuerung von MIDI-Geräten von einem Musik-Software-Sequenzer aus ermöglicht. Sie können zum Beispiel verschiedene Bereiche Ihres Musiksystems, z. B.
Es folgen die gesamten Systemanforderungen, einschließlich Audio-Sequenzer, mLANSoftware und Plug-in-Effekte. Betriebssystem Computer : Windows XP Professional/XP Home Edition : Prozessor der Intel Pentium- oder Celeron-Familie, mit S400 (400 Mbps), IEEE1394 (FireWire) oder i.Link-Anschluss (*1).
Softwareinstallation Anweisungen zur Installation von hier nicht aufgeführten Anwendungen finden Sie auf Seite 5 im Abschnitt „Inhalt der CD-ROM“. Deinstallieren (installierte Anwendung entfernen) Sie können die installierte Anwendungssoftware entfernen. Wählen Sie [START] (→ [Einstellungen]) → [Systemsteuerung] → [Software] → [Installieren/Deinstallieren], markieren Sie die zu entfernende Anwendung, und klicken Sie auf [Hinzufügen/Entfernen…].
mLAN Tools 2.0 und mLAN Applications for YAMAHA Die Software mLAN Tools 2.0 beinhaltet einen Treiber, mit dem Sie mLAN-Geräte an einen Computer anschließen können. mLAN Applications for YAMAHA ermöglicht die Übertragung von Audio- und MIDI-Signalen über mLAN-Kabel zwischen einem Computer und mLAN-Geräten. Mithilfe dieser Software können Sie das i88X, die mLAN16E oder das 01X über mLAN an einen Computer anschließen.
6 Klicken Sie auf [System] ➝ [Hardware] ➝ [Treibersignierung] ➝ [Dateisignaturverifizierung], wählen Deutsch Sie die Option „Ignorieren – Alle Dateien installieren, unabhängig von der Dateisignatur“ aus, und klicken Sie auf [OK]. • Stellen Sie nach Beendigung der Installation ggf. die ursprüngliche Einstellung wieder her. 7 Stellen Sie sicher, dass (unter [System] ➝ [Hardware] ➝ [Geräte-Manager]) neben „IEEE-1394 BusHostcontroller“ keines der Zeichen „!“ oder „x“ angezeigt wird.
8 Klicken Sie auf [OK], um das Fenster Installation von „mLAN Tools“ 9 Beenden Sie alle laufenden Anwendungen, und schließen Sie alle geöffneten Fenster. 10 Legen Sie die mitgelieferte CD-ROM in das CD-ROM-Laufwerk ein. Starten des Installationsprogramms für die mLAN-Software Das Installationsprogramm installiert die folgenden beiden Programme auf Ihrem Computer. • mLAN Tools 2.
Installation von „mLAN Applications for YAMAHA“ (mLAN-Software) Die Anfangseinstellungen des mLAN-Treibers Nach Beendigung der Installation von mLAN Tools 2.0 zeigt der Computer automatisch ein Fenster an, in dem Sie die Installation von Applications for YAMAHA starten können. Klicken Sie auf [Next] (Weiter). Vervollständigen Sie nach dem Neustart des Computers die Anfangseinstellungen des mLAN-Treibers. Wählen Sie in mLAN Manager die Option [ON] (Ein), um den mLAN-Treiber zu aktivieren (Seite 14).
24 Das Dialogfenster „Make the driver initial settings“ (Anfangseinstellungen für den Treiber vornehmen) erscheint. Klicken Sie auf [OK]. • Während der Schritte 25 und 26 sowie während der Schritte 28 und 29 ist auf dem Computerbildschirm ein Fenster zu sehen, das anzeigt, dass Sie gerade die Anfangseinstellungen für den entsprechenden Treiber vornehmen. Außerdem zeigt dieses Fenster an, wie oft während dieses Verfahrens der Assistent „Neue Hardware gefunden“ erscheint.
Bestätigen der Installation Taskleiste (mLAN Manager) Wenn die Installation erfolgreich verläuft, wird der Taskleiste ein mLAN-Symbol (mLAN Manager) hinzugefügt. Klicken Sie mit der rechten Maustaste auf das Symbol, um das Menü aufzurufen. Deutsch Klicken Sie zur Verwendung von mLAN mit der rechten Maustaste auf das mLANSymbol (mLAN Manager) in der Taskleiste, und wählen Sie „ON“ (Ein) aus, um mLAN zu starten. ON ...................
Ändern von Einstellungen nach der Installation Im Fenster „mLAN Driver Setup“ (Setup des mLAN-Treibers) können die mLAN-bezogenen Einstellungen nach der Installation geändert werden. mLAN Driver Setup (Klicken Sie in der Taskleiste mit der rechten Maustaste auf das mLANSymbol ➝ DriverSetup) In diesem Fenster können Sie die mLAN-Einstellungen zum Empfangen/Senden von Daten überprüfen und ändern. Bevor Sie Änderungen vornehmen, müssen Sie alle Anwendungen (DAW usw.
● Latenzarten in einem mLAN-Netzwerk Audiolatenz (ms) Die Audiolatenz wird festgelegt durch die Grundlatenz (wird im Fenster „mLAN Driver Setup“ ausgewählt) und die bevorzugte Puffergröße (wird im ASIO-mLAN-Kontrollfeld) (siehe unten) festgelegt. MIDI-Latenz (ms) Der MIDI-Latenzwert variiert je nach Version des mLAN-Treibers. Informationen über die MIDI-Latenz der Version Ihres mLAN-Treibers finden Sie in der Datei „MIDI_Latency.txt“. Windows: Wählen Sie [Program files | mLAN Tools | YAMAHA | MIDI_Latency.
e Status Wenn Sie mLAN Auto Connector verwenden, zeigt dieser Parameter den aktuellen Status des (MIDI/Audio-)Datenempfangs (vom mLANGerät zum Computer) der mLAN-Verbindung an. Falls ein Übertragungsfehler auftritt, zeigt der Computer eine Fehlermeldung an. Wenn Sie mLAN Graphic Patchbay verwenden: Informationen über die Fehlermeldungen finden Sie in der Online-Anleitung von Graphic Patchbay. Blau........Daten werden ordnungsgemäß übertragen. Gelb........
Wenn das Tonsignal des Computersystems an mLAN-Audiokanäle ausgegeben wird: Das Tonsignal des Computersystems (wie z.B. Alarmtöne) wird an mLAN-Audiokanäle ausgegeben, wenn die folgenden Einstellungen vorgenommen wurden: • In mLAN Auto Connector oder mLAN Graphic Patchbay ist der WDM-Treiber ausgewählt. • Als Systemaudiogerät von Windows ist der mLAN-WDM-Treiber (mLAN Audio Out/In 01) ausgewählt.
Anschließen eines Computers an ein mLAN-Gerät über mLAN • Wenn Sie Auto Connector verwenden, nachdem Sie in mLAN Graphic Patchbay Verbindungen hergestellt haben, werden die in mLAN Graphic Patchbay vorgenommenen Verbindungseinstellungen aufgehoben. In diesem Abschnitt wird das Verfahren beschrieben, mit dem Sie in mLAN Auto Connector einen Computer an ein gleichberechtigtes, einzelnes mLAN-Gerät anschließen.
q Nickname (Spitzname) i Schaltfläche [ASIO/WDM] Dieses Feld gibt den unverwechselbaren Spitznamen des angeschlossenen i88X an. Einzelheiten dazu, wie Sie den Nickname ändern können, finden Sie im Abschnitt „Knoteninformationen“ in der Online-Anleitung von mLAN Graphic Patchbay. Wählen Sie je nach Ihrer Umgebung den ASIOoder WDM-Treiber aus.
Anschließen der mLAN16E (MOTIF ES) q e w r t y u i o !2 q Nickname (Spitzname) t Sample Rate (Sampling-Frequenz) Dieses Feld gibt den unverwechselbaren Spitznamen der angeschlossenen mLAN16E an. Einzelheiten dazu, wie Sie den Nickname ändern können, finden Sie im Abschnitt „Knoteninformationen“ in der Online-Anleitung von mLAN Graphic Patchbay. Mithilfe dieses Parameters können Sie die Sampling-Frequenz (Wordclock-Frequenz) einstellen.
o PC ← MOTIF ES Mit diesem Parameter legen Sie die Anzahl der Kanäle fest, über die Audiosignale vom Ausgang der mLAN16E zum Computer geführt werden. • Die Anzahl der Audiosendekanäle und MIDI-Ports variiert je nach den verschiedenen mLAN16Ekompatiblen Geräten. • Weitere Informationen über die Audio- und MIDIAnschlüsse eines MOTIF ES mit installierter mLAN16E finden Sie im Abschnitt „Systembeispiele“ in der Bedienungsanleitung der mLAN16E.
Tipps für den Einsatz von Audiodaten (Windows) Für den optimalen Einsatz der Audiofunktionen empfehlen wir Ihnen die folgenden Einstellungen. Diese Einstellungen minimieren mögliche Probleme mit Audio wie Aussetzer, Tonhöhenschwankungen und Rauschen.
Wenn die Einstellungen im Fenster „mLAN Auto Connector“ oder „mLAN Driver Setup“ nicht geändert werden können, oder wenn das Programm „mLAN Applications for YAMAHA“/„mLAN Tools 2.0“ nicht deinstalliert werden kann. Beim Ändern der Einstellungen in den Fenstern „mLAN Auto Connector“ und „mLAN Driver Setup“ oder beim Deinstallieren wird u.U. die folgende Meldung angezeigt.
Installieren des Plug-in-Effekts (für i88X-Anwender) 1 Doppelklicken Sie auf den Ordner „VST_“. Daraufhin werden mehrere Dateien angezeigt, unter anderem „Setup.exe“. 2 Doppelklicken Sie auf „Setup.exe“. Das Begrüßungsfenster für die Installation „Welcome to the installShield Wizard“ wird angezeigt. 3 Klicken Sie auf [Next] (Weiter). Geben Sie in dem daraufhin angezeigten Fenster den Benutzernamen, den Firmennamen und die Seriennummer ein. 8 Klicken Sie auf [Next] (Weiter).
Verwenden des installierten Plug-in-Effekts in einer anderen Host-Anwendung Auch nach der Installation des Plug-inEffekts müssen Sie, wenn Sie diesen in einer anderen VST-kompatiblen Host-Anwendung verwenden möchten, das Effekt-Plug-inModul manuell in den von der HostAnwendung festgelegten Ordner „VstPlugins“ kopieren. Deinstallieren (Entfernen installierter Plug-in-Effekte) 1 Wählen Sie [Start] ➝ [(Alle) Programme] ➝ [YAMAHA VST Plugins] ➝ [(Name des Plug-in-Effekts)] ➝ [Setup].
Für Macintosh-Anwender Inhalt der CD-ROM Die Software für Macintosh befindet sich auf zwei CD-ROMs (im Lieferumfang der mLAN16E ist lediglich TOOLS for i88X/mLAN16E enthalten). Installieren Sie als erstes TOOLS for i88X/ mLAN16E. ● TOOLS for i88X/mLAN16E Acroread_ mLAN_ OMS_ Name der Anwendung Inhalt Acrobat Reader*1*2 Dient zum Anzeigen der Programmanleitungen im PDF-Format. • Drücken Sie die Taste [F1] der Computertastatur, um die Online-Hilfe zu öffnen.
Ordnername*3 Mac OS 9 VST_ Name der Anwendung 01X Channel Module*1 Diese Softwareanwendung reproduziert die in jeden Kanal des Digital Mixing Studio 01X von Yamaha integrierten EQ- und Dynamikeffekte und verwendet die Rechenleistung des Computers für die Effekte. Sie können die Dynamikfunktionen und die Funktionen des 4Band-Equalizers (diese sind auch auf den digitalen Mischpulten von Yamaha zu finden) als Effekt-Software verwenden.
Systemanforderungen für i88X/mLAN16E-Software Für die Benutzung der mitgelieferten Software gelten die folgenden Systemanforderungen. ● i88X/mLAN16E (einschließlich der Anforderungen für mLAN Tools 2.0/ mLAN Applications for YAMAHA) Es folgen die gesamten Systemanforderungen, einschließlich Audio-Sequenzer, mLAN Tools 2.0/mLAN Applications for YAMAHA und Plug-in-Effekte. Betriebssystem : Mac OS 9.2 (Die Umgebungen Mac OS X und Mac Classic werden nicht unterstützt.
● Plug-in Effect (nur im Lieferumfang des i88X enthalten) • Es können bis zu zwei PCI- oder PC-Karten verwendet werden. Sie können jedoch nur jeweils eine Karte gleichzeitig benutzen. Wenn Sie eine im Computer eingebaute IEEE1394Schnittstelle verwenden, können Sie nur eine IEEE1394-PCI- oder PC-Karte benutzen. • Bei Verwendung eines iBooks/Powerbooks ist unter Umständen kein integrierter IEEE-1394-Anschluss vorhanden. Installieren Sie in diesem Fall eine geeignete PC-Schnittstellenkarte.
9 Nach dem Neustart des Macintosh befindet Vorbereitungen zur Installation sich auf dem Computer ein Ordner namens „Opcode“/“OMS Applications“ (standardmäßig auf dem Startvolume). VORSICHT • Stellen Sie bei Verwendung der mLANVerbindung sicher, dass alle Energiesparfunktionen auf dem Computer (wie Ruhezustand, Anhalten, Standby oder Pause) deaktiviert sind. Wenn der virtuelle Speicher benutzt wird, schalten Sie ihn aus und starten den Computer neu.
13 Achten Sie darauf, dass „Easy install“ („Einfache Installation“) gewählt ist und klicken Sie auf [Install] („Installieren“). Klicken Sie im darauf folgenden Bestätigungsdialog auf [Continue] (Fortfahren). 14 Wenn eine Meldung „OMS Folder cannot be found in the system folder“ („Kein OMSOrdner im Systemordner gefunden“) o.ä.
Anschließen eines Computers an ein mLAN-Gerät über mLAN • Wenn Sie Auto Connector verwenden, nachdem Sie in mLAN Graphic Patchbay Verbindungen hergestellt haben, werden die in mLAN Graphic Patchbay vorgenommenen Verbindungseinstellungen aufgehoben. • Sie können mLAN Graphic Patchbay auch benutzen, um einen Computer an ein einzelnes, gleichberechtigtes mLAN-Gerät anzuschließen. • Das Fenster von mLAN Auto Connector kann unterschiedlich aussehen, wenn bestimmte mLANGeräte angeschlossen sind.
e Schaltfläche [Update] (Aktualisieren) i Mac ← i88X Wenn Sie auf diese Schaltfläche klicken, werden die Informationen über die an das mLANNetzwerk angeschlossenen mLAN-Geräte aktualisiert. Verwenden Sie diese Taste, wenn Sie zum Netzwerk ein mLAN-Gerät hinzufügen, während mLAN Auto Connector läuft.
Dieses Feld gibt den unverwechselbaren Spitznamen der angeschlossenen mLAN16E an. Einzelheiten dazu, wie Sie den Nickname ändern können, finden Sie im Abschnitt „Knoteninformationen“ in der Online-Anleitung von mLAN Graphic Patchbay. w Model name (Name des Modells) Mithilfe dieses Parameters können Sie in einem Netzwerk mit mehreren mLAN-Geräten ein mLAN-Gerät auswählen, zu dem Sie eine Verbindung herstellen möchten.
Einstellen von OMS • Wenn Sie mLAN auf Ihrem Macintosh mit zusätzlich installierter IEEE-1394-(FireWire) Schnittstellenkarte benutzen, erzeugen Sie im auf der Installations-CDROM enthaltenen OMS Setup ein neues Studio Setup. Einzelheiten hierzu finden Sie in der Anleitung zu OMS. 1 Doppelklicken Sie auf die Ordner „OMS“ und „OMSSetup for YAMAHA“. Es erscheinen die Dateien „i88X-mLAN“, „MOTIF-ES-mLAN“ und „mLAN Generic 16 ports“. Kopieren Sie diese auf die Festplatte Ihres Computers.
• Die Port-Nummern unter „mLAN Generic 16 ports“ im Studio-Setup entsprechen den in mLAN Graphic Patchbay in der Spalte „Connector Name“ angezeigten Nummern. Weitere Informationen über mLAN Graphic Patchbay finden Sie in der Online-Anleitung von mLAN Graphic Patchbay. • Nachdem Sie mit den obigen Anweisungen das OMS Studio Setup eingerichtet haben, erkennt Ihr Computer nur Yamaha-mLAN-(MIDI-)Geräte.
Plug-in-Effekt 1 Doppelklicken Sie auf den Ordner „Mac OS 9“. Der Ordner „VST_“ wird angezeigt. 2 Doppelklicken Sie auf den Ordner „VST_“. 5 Klicken Sie auf [Continue] (Fortfahren). In dem erscheinenden Fenster können Sie den Ordner „VstPlugins“ auswählen, in dem der Plug-in-Effekt installiert werden soll. „VST Plugin Installer.“ wird angezeigt. 3 Doppelklicken Sie auf „VST Plugin Installer“. Ein Fenster zur Auswahl von Plug-in-Effekten wird angezeigt.
Displaymeldungen Seite i88X (oder mLAN16E) auf dem mLAN-Netzwerk nicht gefunden. Achten Sie darauf, dass das i88X (oder die mLAN16E) eingeschaltet ist und dass die mLAN-Kabelverbindung richtig und sicher ist. Starten Sie dann den „mLAN Auto Connector“ nochmals. 19, 33 Die Einstellungen des mLAN-Treibers konnten nicht verändert werden. 1) Wenn ein Programm aktiv ist, das den Treiber benutzt, schließen Sie dieses, und ändern Sie dann erst die Einstellungen.
Fehlerbehandlung Falls ein Problem auftritt… Wenn Sie keinen Ton oder einen merkwürdigen Ton hören, überprüfen Sie zunächst die nachstehend beschriebenen Punkte, und ergreifen Sie geeignete Maßnahmen. Sollte das Problem weiter bestehen, wenden Sie sich an Ihren Yamaha-Vertragshändler. Deutsch ■ Die Kommunikation über mLAN ist nicht möglich. • Wurde der Treiber installiert? ................................................................................ Siehe Seite 12.
• Denken Sie daran, die Wordclock richtig einzurichten. Achten Sie auch darauf, dass ein Knoten als Master und die anderen als Slaves definiert sind. ............Lesen Sie hierzu den Abschnitt „mLAN-Verbindungseinstellungen“ in der Online-Anleitung von mLAN Graphic Patchbay. ■ Die Verarbeitungsgeschwindigkeit des Computers ist zu langsam. ■ Das CPU-Meter des Computers zeigt eine hohe Verarbeitungslast an. ■ Die Wiedergabe erfolgt verzögert.
■ (Windows) Der mLAN Manager (das mLAN-Symbol in der Taskleiste) ist verschwunden. • Wählen Sie [Start | (Alle) Programme | Autostart (oder mLAN Tools)], und wählen Sie dann mLAN Manager. ■ Ein angeschlossenes mLAN-Gerät wird nicht erkannt. • Aktualisieren Sie die Informationen, indem Sie in der Menüleiste die Option [View] und danach [Update] wählen.
Table des matières Remarques importantes concernant le CD-ROM ........................... 4 Système d'exploitation............................................................................ 4 Procédure d'installation du CD-ROM...................................................... 4 Pour les utilisateurs de Windows.................................................... 5 Contenu du CD-ROM .............................................................................
Remarques importantes concernant le CD-ROM Système d'exploitation Les applications de ce CD-ROM sont proposées dans des versions compatibles avec les systèmes d'exploitation Windows et Macintosh. La procédure d'installation et les applications elles-mêmes diffèrent en fonction du système d'exploitation que vous utilisez. Veuillez vous reporter aux instructions d'installation correspondantes. Pour Windows, reportez-vous à la page 5~25. Pour Macintosh, reportez-vous à la page 27.
Pour les utilisateurs de Windows Contenu du CD-ROM Les logiciels pour Windows sont compris sur deux CD-ROM (pour la carte mLAN16E seul TOOLS for i88X/mLAN16E est inclus). Installez tout d'abord TOOLS for i88X/mLAN16E (Outils pour i88x/ mLAN16E). ● TOOLS for i88X/mLAN16E Nom du dossier Acroread_ mLAN_ Nom de l'application Contenu Acrobat Reader *1 *2 Vous permet de visualiser les manuels PDF des différentes applications. • Ouvrez l'aide en ligne en appuyant sur la touche [F1] de l'ordinateur.
■ A propos de l'OPT (Open Plug-in Technology) Vous pouvez lancer mLAN Graphic Patchbay en tant que logiciel autonome ou que plug-in pour toute application compatible avec l'Open Plug-in Technology (OPT). L'OPT est un nouveau format de logiciel qui vous permet de contrôler les périphériques MIDI à partir d'un séquenceur de logiciels de musique.
La configuration système totale, qui inclut le séquenceur audio, le logiciel mLAN et les effets plug-in, est la suivante. Système : XP Edition Professionnelle/ d'exploitation XP Edition Familiale Ordinateur : processeur de la famille Intel Pentium ou Celeron, avec borne IEEE1394 S400 (400 Mbps) (FireWire) ou i.Link (*1).
Installation des logiciels Pour obtenir des instructions sur l'installation des logiciels autres que celui décrit ci-dessous, reportezvous à la page page 5 de la section « Contenu du CD-ROM ». Désinstallation (suppression de l'application installée) Vous pouvez supprimer le logiciel installé.
mLAN Tools 2.0 et mLAN Applications for YAMAHA Le logiciel mLAN Tools 2.0 comprend un pilote qui vous permet de connecter des périphériques mLAN à un ordinateur. Le logiciel mLAN Applications for YAMAHA permet le transfert des signaux audio et MIDI entre un ordinateur et des périphériques mLAN via des câbles mLAN. Il vous permet de connecter le i88X, la carte mLAN16E ou le 01X à un ordinateur via mLAN.
6 Sélectionnez [Système] ➝ [Matériel] ➝ [Signature du pilote] ➝ [Vérification des signatures de fichiers] Français et cochez la case d'option à gauche de « Ignorer : installe tous les fichiers, quelles que soient leurs signatures » et cliquez sur [OK]. • Au terme de l'installation, veillez à restaurer la configuration d'origine si nécessaire. 7 Vérifiez qu'aucun symbole « ! » ou « x » n'apparaît à côté de « Contrôleur de bus IEEE 1394 » (dans [Système] ➝ [Matériel] ➝ [Gestionnaire de périphériques]).
8 Cliquez sur [OK] pour fermer la fenêtre Installation de mLAN Tools Propriétés système, puis sur le bouton Fermer ([X]) dans le coin supérieur droit de la fenêtre pour fermer le Panneau de configuration. 9 Sortez des applications ouvertes et fermez toutes les fenêtres actives. 10 Insérez le CD-ROM inclus dans le lecteur de CD-ROM. Démarrage du programme d'installation du logiciel mLAN Le programme d'installation installe les deux programmes suivants sur votre ordinateur. • mLAN Tools 2.
Installation de mLAN Applications for YAMAHA (logiciel mLAN) Une fois l'installation de mLAN Tools 2.0 terminée, l'ordinateur affiche automatiquement une fenêtre qui vous permet de lancer l'installation d'Applications for YAMAHA. Cliquez sur [Suivant]. Réglages initiaux du pilote mLAN Après avoir redémarré l'ordinateur, effectuez les réglages initiaux du pilote mLAN. Sélectionnez [ON] dans mLAN Manager pour activer le pilote mLAN (page 14).
24 La boîte de dialogue permettant d'effectuer les réglages initiaux du pilote s'affiche. Cliquez sur [OK]. Réglages initiaux du port MIDI mLAN 28 L'ordinateur affiche automatiquement • Au cours des étapes 25 et 26, et des étapes 28 et 29, l'ordinateur affiche une fenêtre indiquant que effectuez à présent les paramètres initiaux de chaque pilote. Cette fenêtre indique également le nombre de fois que l'Assistant Nouveau matériel détecté s'affichera au cours de la procédure.
Confirmation de l'installation Barre de tâches (mLAN Manager) Si l'installation réussit, une icône mLAN (mLAN Manager) apparaît dans la barre de tâches. Pour appeler le menu, cliquez avec le bouton droit de la souris sur l'icône. Français Lorsque vous utilisez le mLAN, cliquez avec le bouton droit sur l'icône mLAN (mLAN Manager) dans la barre de tâches et sélectionnez « ON » (Activer) (pour démarrer le mLAN). ON ...................
Modification des paramètres après l'installation Vous pouvez modifier les paramètres du mLAN après l'installation depuis la fenêtre mLAN Driver Setup. mLAN Driver Setup (Cliquez avec le bouton droit sur l'icône mLAN dans la barre de tâches ➝ Driver Setup) Cette fenêtre vous permet de vérifier et de modifier les paramètres de réception/transmission des données mLAN. Veillez à fermer toutes les applications (DAW, etc.) qui utilisent la connexion mLAN avant d'apporter des modifications.
● Types de latence au sein d'un réseau mLAN Latence audio (msec) La latence audio est déterminée par la latence de base (sélectionnée dans la fenêtre mLAN Driver Setup) et le paramètre Preferred Buffer Size (Taille préférée du tampon) (spécifié dans le panneau de configuration de ASIO mLAN) (voir ci-dessous). Latence MIDI (msec) La valeur de latence MIDI varie en fonction de la version du pilote mLAN.
e Status (Statut) Si vous utilisez mLAN Auto Connector, ce paramètre indique le statut actuel de réception des données (MIDI/Audio) (du périphérique mLAN vers l'ordinateur) de la connexion mLAN. En cas d'erreur de transmission, l'ordinateur affiche un message d'erreur. Si vous utilisez mLAN Graphic Patchbay, reportez-vous au manuel en ligne de Graphic Patchbay pour obtenir davantage d'informations sur les messages d'erreur. Bleu........Les données sont correctement transmises. Jaune ......
Si le système audio de l'ordinateur prévoit la sortie audio via des canaux audiomLAN : Le système audio de l'ordinateur (par exemple, un son d'alarme) permet au son de sortir par les canaux audio mLAN si les réglages suivants sont effectués : • Le pilote WDM est sélectionné dans mLAN Auto Connector ou mLAN Graphic Patchbay. • Le pilote mLAN WDM (mLAN Audio Out/In 01) est sélectionné pour le périphérique audio système Windows.
Connexion d'un ordinateur à un périphérique mLAN via mLAN • Si vous utilisez Auto Connector après avoir effectué des connexions dans mLAN Graphic Patchbay, ces dernières seront annulées. Cette section décrit la procédure de connexion d'un ordinateur à un périphérique mLAN unique, d'homologue à homologue, dans mLAN Auto Connector. Dans mLAN Auto Connector, vous pouvez facilement connecter un périphérique mLAN en configurant l'horloge et le nombre de canaux d'entrée/sortie audio.
q Nickname (Surnom) i Bouton [ASIO/WDM] Ce champ indique le surnom du i88X connecté. Pour modifier le surnom, reportez-vous aux informations relatives aux noeuds dans le manuel en ligne de mLAN Graphic Patchbay. Sélectionnez le pilote ASIO ou WDM en fonction de votre environnement. w Model name (Nom du modèle) Ce paramètre vous permet de sélectionner un périphérique mLAN pour lequel vous souhaitez effectuer une connexion mLAN dans un réseau comportant plusieurs périphériques mLAN.
Connexion de mLAN16E (MOTIF ES) q e w r t y u i o !2 q Nickname (Surnom) t Sample Rate (Taux d'échantillonnage) Ce champ indique le surnom de la carte mLAN16E connectée. Pour modifier le surnom, reportez-vous aux informations relatives aux noeuds dans le manuel en ligne de mLAN Graphic Patchbay. Ce paramètre vous permet de spécifier la fréquence d'échantillonnage (fréquence d'horloge).
o PC ← MOTIF ES Ce paramètre vous permet de spécifier le nombre de canaux de données audio qui entrent au niveau de l'ordinateur depuis la sortie de la carte mLAN16E. • Le nombre de canaux de transmission audio et de ports MIDI varie en fonction des périphériques compatibles mLAN16E. • Pour plus d'informations sur les connexions audio et MIDI pour un MOTIF ES doté d'une carte mLAN16E, reportez-vous aux exemples système fournis dans le mode d'emploi de la carte mLAN16E.
Astuces en cas d'utilisation de données audio (Windows) Pour une utilisation optimale des fonctions audio, nous vous recommandons d'effectuer les paramétrages suivants. Ceux-ci permettent de limiter les éventuels problèmes audio, tels que des coupures, des dissonances et des bruits parasites.
Lorsque vous ne pouvez pas modifier les paramètres de mLAN Auto Connector ou de Driver Setup ou que vous ne pouvez pas désinstaller mLAN Applications for YAMAHA/ mLAN Tools 2.0. Le message ci-dessous apparaît parfois lorsque vous modifiez les réglages de mLAN Auto Connector et de Driver Setup ou en cas de désinstallation d'un programme.
Installation de l'effet plug-in (pour les utilisateurs de i88X) 1 Double-cliquez sur le dossier « VST_ ». 8 Cliquez sur [Suivant]. Dans la fenêtre qui Plusieurs fichiers, parmi lesquels « Setup.exe », s'affichent. 2 Double-cliquez sur « Setup.exe ». La fenêtre « Bienvenue dans l'InstallShield Wizard » s'affiche. 3 Cliquez sur [Suivant]. Dans la fenêtre qui apparaît, saisissez le nom d'utilisateur, le nom de la société et le numéro de série.
Utilisation de l'effet plug-in installé sur une autre application hôte Même après avoir installé l'effet plug-in, si vous prévoyez de l'utiliser avec une autre application hôte compatible avec VST, vous devrez copier manuellement le module de l'effet plug-in dans le dossier « VstPlugins » spécifié par l'application hôte. 1 Sélectionnez [Démarrer] ➝ [(Tous les) Programmes] ➝ [YAMAHA VST Plugins] ➝ [(nom de l'effet plug-in)] ➝ [Configurer]. Un écran de bienvenue apparaît.
Pour les utilisateurs de Macintosh Contenu du CD-ROM Les logiciels pour Macintosh sont compris sur deux CD-ROM (pour la carte mLAN16E, seul TOOLS for i88X/mLAN16E est inclus). Installez d'abord TOOLS for i88X/mLAN16E. ● TOOLS for i88X/mLAN16E Nom du dossier Acroread_ mLAN_ OMS_ Nom de l'application Contenu Acrobat Reader *1 *2 Vous permet de visualiser les manuels PDF des différentes applications. • Ouvrez l'aide en ligne en appuyant sur la touche [F1] de l'ordinateur.
Nom du dossier*3 Mac OS 9 VST_ Nom de l'application Contenu 01X Channel Module*1 Ce logiciel reproduit les effets d'égaliseur et de dynamique intégrés dans chacun des canaux du Digital Mixing Studio 01X de Yamaha et utilise la puissance de traitement de l'ordinateur pour produire les effets. Vous pouvez utiliser les fonctions de dynamiques et de l'égaliseur à quatre bandes (également disponibles sur les consoles de mixage numérique Yamaha Digital Mixing) comme logiciel d'effets.
Configuration requise pour le logiciel i88X/mLAN16E La configuration système spécifiée ci-dessous est requise pour pouvoir utiliser les logiciels fournis. ● i88X/mLAN16E (y compris la configuration requise pour mLAN Tools 2.0/mLAN Applications for YAMAHA) La configuration système totale, qui inclut le séquenceur audio, mLAN Tools 2.0/mLAN Applications for YAMAHA et les effets plugin, est la suivante. Système : Mac OS 9.
• Vous pouvez utiliser deux cartes PCI ou PC maximum. Cependant, vous ne pouvez vous servir que d'une seule carte à la fois. Si vous utilisez une interface IEEE1394 intégrée à l'ordinateur, vous ne pouvez utiliser qu'une seule carte d'interface IEEE1394 PCI ou PC en même temps. • Si vous utilisez un ordinateur portable, il est possible qu'aucune borne IEEE 1394 intégrée ne soit disponible. Dans ce cas, installez une carte d'interface PC appropriée.
9 Après avoir redémarré votre Macintosh, le Préparation de l'installation dossier « Opcode »/« OMS Applications » se trouve sur votre ordinateur (par défaut, sur le disque dur). 1 Allumez l'ordinateur. ATTENTION • Lorsque vous utilisez la connexion mLAN, prenez soin de désactiver toutes les fonctions d'économie d'énergie de l'ordinateur (telles que Suspension, Veille, Attente ou Pause). Si vous utilisez la mémoire virtuelle, désactivezla, puis redémarrez l'ordinateur.
13 Vérifiez que « Easy install » est sélectionné et cliquez sur « Install ». Cliquez sur « Continue » (Continuer) en réponse au message de confirmation qui apparaît.
Connexion d'un ordinateur à un périphérique mLAN via mLAN • Si vous utilisez Auto Connector après avoir effectué des connexions dans mLAN Graphic Patchbay, ces dernières seront annulées. Cette section explique comment connecter un ordinateur à un périphérique mLAN unique, d'homologue à homologue, dans mLAN Auto Connector. Dans mLAN Auto Connector, vous pouvez facilement connecter un périphérique mLAN en configurant l'horloge et en spécifiant le nombre de canaux d'entrée/sortie audio.
e Bouton [Update] (Mettre à jour) i Mac ← i88X Cliquez sur ce bouton pour mettre à jour les informations relatives aux périphériques mLAN connectés au réseau mLAN. Utilisez ce bouton pour ajouter un périphérique mLAN au réseau pendant l'exécution de mLAN Auto Connector.
q Nickname (Surnom) Ce champ indique le surnom de la carte mLAN16E connectée. Pour modifier le surnom, reportez-vous aux informations relatives aux noeuds dans le manuel en ligne de mLAN Graphic Patchbay. w Model name (Nom du modèle) Ce paramètre vous permet de sélectionner un périphérique mLAN pour lequel vous souhaitez effectuer une connexion mLAN dans un réseau comportant plusieurs périphériques mLAN. Une fois la carte mLAN16E connectée, sélectionnez le nom du périphérique équipé de cette carte.
Configuration d'OMS • Si vous utilisez le mLAN sur votre Macintosh avec une carte d'interface IEEE 1394 (FireWire) installée en option, créez une nouvelle configuration Studio à l'aide de OMS Setup disponible sur le CD-ROM d'installation. Pour plus de détails, reportez-vous au manuel OMS. 1 Double-cliquez sur le dossier « OMS », puis « OMSSetup for YAMAHA ». Les fichiers « i88X-mLAN », « MOTIF-ES-mLAN » et « mLAN Generic 16 ports » s'affichent. Copiez-le sur le disque dur de votre ordinateur.
• Les numéros de ports dans la configuraiton du studio « mLAN Generic 16 ports » correspondent aux numéros indiqués dans la colonne « Connector Name » dans mLAN Graphic Patchbay. Pour plus d'informations sur Graphic Patchbay, reportez-vous au manuel en ligne de Graphic Patchbay. • Une fois la configuration du studio OMS terminée, votre ordinateur ne reconnaît plus que les périphériques (MIDI) mLAN de Yamaha.
Plug-in Effect 1 Double-cliquez sur le dossier « Mac OS 9 ». Le dossier « VST_ » s'affiche. 2 Double-cliquez sur le dossier « VST_ ». La 5 Cliquez sur [Continue]. Dans la fenêtre qui apparaît, vous pouvez sélectionner le dossier « VstPlugins » dans lequel installer l'effet plug-in. fenêtre « VST Plugin Installer » s'affiche. 3 Double-cliquez sur « VST Plugin Installer ». Une fenêtre de sélection des effets plug-in apparaît.
Messages de l'afficheur Messages Page i88X (ou mLAN16E) introuvable sur le réseau mLAN. Vérifiez que le i88X (ou mLAN16E) est sous tension et que le câble mLAN est correctement branché et bien enfoncé. Redémarrez ensuite « mLAN Auto Connector ». 19, 33 Impossible de modifier les paramètres de mLAN Driver. 1) Si une application utilisant le pilote est actuellement active, fermez-la, puis modifiez les paramètres. 2) La mémoire ressource est insuffisante.
Dépistage des pannes En cas de problème... Si vous n'entendez aucun son ou un son étrange, vérifiez d'abord les éléments décrits ci-dessous et agissez en conséquence. Si le problème persiste, consultez votre revendeur Yamaha. ■ Communication via mLAN impossible. • Le pilote est-il installé ? ..........................................................................................Voir page 12.
• Vérifiez que l'horloge est correctement configurée. Vérifiez également qu'un noeud est affecté en tant que maître et les autres en tant qu'esclaves. ........... Reportez-vous à la section « Réglages de connexion mLAN » dans le manuel en ligne de mLAN Graphic Patchbay. ■ La vitesse de traitement de l'ordinateur est trop faible. ■ L'indicateur de niveau du processeur indique une charge de traitement importante. ■ La réponse de reproduction est lente.
■ (Windows) mLAN Manager (l'icône mLAN dans la barre des tâches) a disparu. • Sélectionnez [Démarrer| (Tous les) Programmes | Démarrage (ou mLAN Tools)], puis sélectionnez mLAN Manager. ■ Un périphérique connecté mLAN n'est pas reconnu. • Actualisez les informations en sélectionnant [View] (Affichage), puis [Update] (Mettre à jour) dans la barre de menus.
SOFTWARE LICENSING AGREEMENT The following is a legal agreement between you, the end user, and Yamaha Corporation (“Yamaha”). The enclosed Yamaha software program is licensed by Yamaha to the original purchaser for use only on the terms set forth herein. Please read this licensing agreement with care. Opening this package indicates that you accept all terms outlined herein. If you do not agree to the terms, return this package unopened to Yamaha for a full refund.
SOFTWARE-LIZENZVEREINBARUNG Die folgende Vereinbarung ist eine rechtsgültige Vereinbarung zwischen Ihnen, dem Endanwender, und der Yamaha Corporation (“Yamaha”). Yamaha erteilt dem ursprünglichen Käufer für das beiliegende Yamaha-Softwareprogramm ausschließlich zu den hier ausgeführten Bedingungen eine Lizenz zur Verwendung. Bitte lesen Sie diese Lizenzvereinbarung sorgfältig. Durch das Öffnen dieser Packung bringen Sie zum Ausdruck, dass Sie alle darin enthaltenen Bedingungen akzeptieren.
CONTRAT DE LICENCE DE LOGICIEL Ceci est un contrat entre vous-même, l’utilisateur final, et Yamaha Corporation (« Yamaha »). Le logiciel Yamaha ci-inclus est concédé sous licence par Yamaha à l’acheteur original et ne peut être utilisé que dans les conditions prévues aux présentes. Veuillez lire attentivement ce contrat de licence. Le fait d’ouvrir ce coffret indique que vous acceptez l’ensemble des termes du contrat.
This document is printed on chlorine free (ECF) paper with soy ink. Auf Umweltpapier mit Sojatinte gedruckt. Ce document a été imprimé sur du papier non blanchi au chlore avec de l'encre d'huile de soja. U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation © 2004 Yamaha Corporation WD20700 403APAP1.