Manual

ManualsBrandsYamaha ManualsComputer PeripheralsNX-50 Speaker System

Powered Speaker

NX-50

Aesthetically neutral design

Solid and stylish metal grill design in a

compact size that will t into a variety of

home environments.

Loudness control

e Loudness control function of

the speakers allows you to enjoy rich

bass tone sounds even at low volumes.

Plays a variety of contents

with high-quality sound.

You can enjoy a variety of contents with

high-quality sound by connecting to external

devices such as computers or TVs.

Auto-standby

When no sound is input for a period

of time, the speakers go to

standby mode automatically.

Since you do not have to

turn on/o the power every time,

you can save energy.

OWNER’S MANUAL

FEATURES

Summary of content (8 pages)

PAGE 1
AB NX-50 Powered Speaker OWNER’S MANUAL FEATURES Aesthetically neutral design Solid and stylish metal grill design in a compact size that will fit into a variety of home environments. Loudness control The Loudness control function of the speakers allows you to enjoy rich bass tone sounds even at low volumes. Plays a variety of contents with high-quality sound. You can enjoy a variety of contents with high-quality sound by connecting to external devices such as computers or TVs.
PAGE 2
Caution: Read this before operating your unit. To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 1 Install this unit in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. For proper ventilation, allow the following minimum clearances.
PAGE 3
SPECIAL INSTRUCTIONS FOR U.K. MODEL IMPORTANT THE WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE: Blue: NEUTRAL Brown: LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
PAGE 4
Controls and functions 1 Front panel Headphones connector (3.5 mm stereo mini jack) Use for a headphones connection. When a headphones connection is made, no sound is output from the speakers. R speaker (Right) (On the right side when facing the front of the speakers.) Notes To protect your hearing, make sure that the volume is low before headphones are used. • Do not use headphones with a loud volume for a long time. Otherwise, your hearing may be damaged.
PAGE 5
3 p (power)/indicator (LED) When you press p (power), the speakers will turn on and the indicator will light up. Also, the auto-standby mode will be available. Note Even when the speakers are turned off or are in standby mode, they consume a small amount of electricity. Viewing the p (power) button from the side… OFF Perform the following procedure to exit standby mode. a Turn up the output level of the connected device. b Rotate the VOL (volume) control of this unit and adjust to the desired sound level.
PAGE 6
Connections • Make sure you connect the power cord only after all other connections are made. • For details about external devices, see their instruction manuals. b a Connect the cable from the L speaker (left) at the rear, to the TO LEFT SPEAKER of the R speaker (right). PC TV Portable player b Connect to external devices, such as portable players or computers, through input connectors AUDIO INPUT 1/2 using the supplied 3.5 mm stereo mini plug cable.
PAGE 7
Troubleshooting Refer to the table below if the unit does not operate properly. If the problem you are experiencing is not listed below, or if the instruction below does not help, turn off the unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. Symptoms Causes • The AC adaptor is disconnected No sound is from the wall outlet. output from • The p (power) is not turned on. either of the speakers, or the • Connections are faulty.