Supplementary Manual

ManualsBrandsYamaha ManualsDAW SystemYamaha NUAGE V1.6

NUAGE FADER

Ncs

500

CONTROL SURFACE

NUAGE MASTER

Ncs

500

CONTROL SURFACE

NUAGE I/O

Nio

500

D16/A16/A8D8

AUDIO INTERFACE

This supplementary manual explains features and functions that have been added or changed in NUAGE

V1.6. Please read this manual together with other related NUAGE manuals.

Main changes

• Added support for Cubase Pro 8 (Nuage Master, Nuage Fader) page 2

• Updated Direct Monitoring window in Nuage I/O Setup (Nuage I/O) page 4

• Added stereo panner switching function (Nuage Fader) page 4

• Added more parameters to Channel Strip section (Nuage Fader) page 5

• Added support for switching parameters in Channel Setting mode (Nuage Fader) page 5

• Added key function (shortcut) for dividing events into selected ranges (Nuage Master) page 5

• Added collective bypass function for inserts (Nuage Fader) page 6

• Added collective bypass function for dynamics (Nuage Master) page 6

• Added support for switching between multiple Avid Pro Tools (NUAGE Workgroup Manager) page 6

• Added support for remote operation of the RMio64-D (NUAGE Workgroup Manager) page 7

• Changed display on the Marker Jump pop-up window into the list display (Nuage Master) page 8

• Added a function for Project cursor positioning (Nuage Master) page 8

• Added enable/disable selection for [Jog wheel] during project playback (Nuage Master) page 9

V1.6 Supplementary Manual

Summary of content (10 pages)

PAGE 1
NUAGE MASTER NUAGE FADER NUAGE I/O CONTROL SURFACE Ncs500-CT CONTROL SURFACE Ncs500-FD AUDIO INTERFACE Nio500-D16/A16/A8D8 V1.6 Supplementary Manual This supplementary manual explains features and functions that have been added or changed in NUAGE V1.6. Please read this manual together with other related NUAGE manuals.
PAGE 2
Added Support for Cubase Pro 8 (Nuage Master, Nuage Fader) Cubase Pro 8 is now supported. The following new functions are also supported. VCA Fader You can show/hide the VCA Fader with [OTHERS] in the CHANNEL VIEW CONTROL section. DeEsser You can now adjust the DeEsser parameters with Nuage Fader and Nuage Master. (The Nuage Master window is shown below.) High Cut and Low Cut Filter Slopes • You can adjust the “High Cut” and “Low Cut” slopes in the Nuage Fader channel strip (page 5).
PAGE 3
Channel Strip Recording MIDI Events to the Tracks You can adjust the following parameters on the INSERT page of Nuage Master CHANNEL CONTROL. Channel Setting Mode MIDI/Audio (Only for Instrument Tracks) Switches the type of plug-in. To record the MIDI events, select “MIDI.”  (Record Output to Track) Selects (lit) and deselects (dim) a MIDI track or instrument track as the recording destination for a MIDI event.
PAGE 4
Updated Direct Monitoring Window in Nuage I/O Setup (Nuage I/O) The connection destinations for output buses that are the targets of direct monitoring are now displayed in the Direct Monitoring window in NUAGE I/O Setup. Available Nuage I/O ports are displayed in the “Connected to” column. To open the NUAGE I/O Setup window, in the Nuendo menu select “Devices,” then “NUAGE I/O Setup.” Added Stereo Panner Switching Function (Nuage Fader) You can now switch between the types of stereo panners in Nuage Fader.
PAGE 5
Added More Parameters to Channel Strip Section (Nuage Fader) Added Support for Switching Parameters in Channel Setting Mode (Nuage Fader) You can now adjust HC SLOPE, LC SLOPE, GAIN, φ (PHASE), HA HPF, and HA +48V in the channel strip. HA GAIN and HA GC, which were previously assigned to [Sub parameter 2], have been moved to [Sub parameter 4]. You can now switch sub-parameters in the Channel Setting mode to make adjustments to parameters. Operation • DeEsser (Cubase Pro 8 and later) 1.
PAGE 6
Added Collective Bypass Function for Inserts (Nuage Fader) Added Collective Bypass Function for Dynamics (Nuage Master) You can now turn bypass on/off for “Inserts” on the selected channels. You can now turn bypass on/off for “Dynamics” on the selected channels. Operation Operation 1. Press [INSERT] in the SECTION CONTROL section. 1. Select the track for turning dynamics on/off. “INSERTS” is displayed in the label area. 2.
PAGE 7
Added Support for RMio64-D (NUAGE Workgroup Manager) You can now control the RMio64-D Dante/MADI conversion audio interface remotely from NUAGE Workgroup Manager. NOTE Output Clock Source Enables you to select the MADI output signal when SRC is on as the word clock source. Same as Input Clock Source Syncs the MADI output signal with the MADI input signal. Same as Word Clock Source Syncs the MADI output signal with the RMio64-D clock.
PAGE 8
Changed Display on the Marker Jump Pop-Up Window into the List Display (Nuage Master) The pop-up display for the Marker Jump function and Cycle Marker jump function has been changed to a list display. Nearby markers are displayed in relation to the entered “Marker ID.” Operation 1. Press [MARKER] in the NUMERIC PAD section. Added a Function for Project Cursor Positioning (Nuage Master) You can now enter values in units of hours, minutes, and seconds to position the “Project Cursor” on the TRANSPORT page.
PAGE 9
Added Enable/Disable Selection for [Jog wheel] during Project Playback (Nuage Master) You can now disable [Jog wheel] operation during Project playback. Doing so will prevent unintended operation of the Project cursor during playback. Settings Switch the setting by using the “JOG Operation during Playback” control on SETUP Page – PAGE 3. SETUP Page – PAGE 3 On Enables [Jog wheel] operation during Project playback. Off Disables [Jog wheel] operation during Project playback. NUAGE V1.
PAGE 10
Yamaha Pro Audio global web site: http://www.yamahaproaudio.com/ Yamaha Manual Library http://www.yamaha.co.