Supplementary Manual

ManualsBrandsYamaha ManualsDAW SystemYamaha NUAGE V1.5

NUAGE FADER

Ncs

500

CONTROL SURFACE

NUAGE MASTER

Ncs

500

CONTROL SURFACE

NUAGE I/O

Nio

500

D16/A16/A8D8

AUDIO INTERFACE

This supplementary manual explains features and functions that have been added or changed in NUAGE

V1.5. Please read it together with other related NUAGE manuals.

Main changes

• Added support for remote operation of R series devices

(Dante supported I/O rack)

(Nuage Fader) page 2

• Added quick control setting screen (Nuage Master) page 2

• Added support for VST instruments control (Nuage Master) page 3

• Added screen scrolling by dragging (Nuage Master) page 3

• Added support for track visibility configuration function (Nuage Master) page 4

• Added super fine mode (Nuage Master, Nuage Fader) page 4

• Added support for send panning (Nuage Master) page 4

• Added support for new Nuendo 6.5 plug-in (Nuage Master, Nuage Fader) page 5

• Added support for additional Nuendo 6.5 ADR functions (Nuage Master) page 5

• Added direct monitoring settings (Nuage I/O) page 5

• Added selection function for Ethernet port to use with Avid Pro Tools (NUAGE PT Bridge) page 6

• Added other various functions (Nuage Master) page 7

V1.5 Supplementary Manual

Summary of content (8 pages)

PAGE 1
NUAGE MASTER NUAGE FADER NUAGE I/O CONTROL SURFACE Ncs500-CT CONTROL SURFACE Ncs500-FD AUDIO INTERFACE Nio500-D16/A16/A8D8 V1.5 Supplementary Manual This supplementary manual explains features and functions that have been added or changed in NUAGE V1.5. Please read it together with other related NUAGE manuals.
PAGE 2
Added support for remote operation of R series devices (Dante supported I/O rack) (Nuage Fader) The HA gain of R series devices (Rio3224-D, Ri8-D, etc.) can now be controlled. • Press [PRE] in the SECTION CONTROL section, and then press [Sub parameter 2] to use a [Multi function knob] to control the “HA GAIN” and “HA GC” on the input channel where the R series device is connected.
PAGE 3
Added support for VST instruments control (Nuage Master) 5 W (Write) Turns “Write Automation” on (lit) and off (dark). 6 VST instrument name/library name Shows the selected instrument and library. You can control VST instruments on instrument tracks on the CHANNEL CONTROL page. 7 Parameters CHANNEL CONTROL – MAIN Page Touch a parameter to control it with a [Multi function knob]. Press [Multi function button B] to lock the value for the parameter. Press the button once again to unlock the value.
PAGE 4
Added support for track visibility configuration function (Nuage Master) Added support for send panning (Nuage Master) Channel “Sends” can now be panned. You can now use the “track visibility control” function of Nuendo 6.5. This can greatly improve work efficiency on large-scale projects. CHANNEL CONTROL – SENDS Page TRACK LIST Page – Track Visibility View 1 1 2 2 3 4 1 LP (Link Panners) Turns “Link Panners” on (lit) and off (dark). 1 Track Visibility Switches to the Track Visibility view.
PAGE 5
Added support for new Nuendo 6.5 plug-in (Nuage Master, Nuage Fader) 3 U7: ADR Status (ADR Status Indicator On/ You can now select [DYN] in the SECTION CONTROL section to control the parameters of the new Nuendo 6.5 plug-in (Magneto II). In ADR mode, the functions of the buttons in the TRANSPORT section change. You can also now control the Noise Gate parameters. (The screen shown below is from Nuage Master. ) Off) TRANSPORT Section [PREROLL] Turns Pre Roll on and off in Free Run mode.
PAGE 6
3 Identify Searches for the Dante Accelerator specified with “Dante Interface”. When “Identify” is clicked, all LEDs for the specified Dante Accelerator flash for a few seconds simultaneously, and then stops automatically. 4 Refresh Refreshes the direct monitoring channel list. 5 +/- (Show/Hide Channel) Shows (+) or hides (-) the channels assigned to the bus. 6 Number of channels available for direct monitoring Shows the number of channels available for direct monitoring.
PAGE 7
Added other various functions (Nuage Master) PAGE 3 SETUP Page SETUP page is divided into three pages since the number of configurable settings has been increased. PAGE 1 3 3 MUTE Button Behavior Switches the behavior of [MUTE] on the channel strip. When set to Continuous, pressing and holding [MUTE] on one channel while pressing [MUTE] on another channel will simultaneously turn on and off all “mute” functions for every channel between those two channels.
PAGE 8
Yamaha Pro Audio global web site: http://www.yamahaproaudio.com/ Yamaha Manual Library http://www.yamaha.co.jp/manual/ C.S.G.