Supplementary Manual

ManualsBrandsYamaha ManualsDAW SystemYamaha NUAGE V1.1

NUAGE FADER

Ncs

500

CONTROL SURFACE

NUAGE MASTER

Ncs

500

CONTROL SURFACE

This supplementary manual explains features and functions that have been added or changed in TOOLS for

NUAGE V1.1.0. Please read it together with the Nuage Fader Operation Manual and the Nuage Master

Operation Manual.

Main changes

• Added the ADR mode (Nuage Master) page 2

• Added the functions for configuring the buttons in the USER ASSIGNABLE section (Nuage Master, Nuage Fader) page 3

• Added support for remote operation of the AD8HR remote preamp (Nuage Fader) page 4

• Added the display in the [Channel name display] (Nuage Fader) page 6

• Added display channels on the LCD (Nuage Fader) page 6

• Added some track select operations (Nuage Master) page 7

• Added some Zoom In and Zoom Out operations (Nuage Master) page 8

• Added some editing operations (Nuage Master) page 9

• Added other various functions (Nuage Master) page 9

V1.1 Supplementary Manual

Summary of content (10 pages)

PAGE 1
NUAGE MASTER NUAGE FADER CONTROL SURFACE Ncs500-CT CONTROL SURFACE Ncs500-FD V1.1 Supplementary Manual This supplementary manual explains features and functions that have been added or changed in TOOLS for NUAGE V1.1.0. Please read it together with the Nuage Fader Operation Manual and the Nuage Master Operation Manual.
PAGE 2
Added the ADR mode (Nuage Master) ADR Page Added the ADR mode corresponding to the ADR function of Nuendo 6. TRANSPORT Section Press [Display access] repeatedly to display an “ADR page” (shown on the right), and then touch “Transport Switch” in the [Multi function Display] to select the ADR mode. The [Display access] indication flashes while the ADR mode is active. To cancel the ADR mode, touch “Transport Switch” again. Nuendo Opens the Marker Window in the Nuendo window.
PAGE 3
NUMERIC PAD Section Added the functions for configuring the buttons in the USER ASSIGNABLE section (Nuage Master, Nuage Fader) The function assignments can be saved, and the saved assignments can be recalled. The functions can be assigned to each Nuage Fader. USER ASSIGNABLE Page (Nuage Master) [MARKER] Selects the Marker designation.
PAGE 4
NUAGE MASTER Setup To open this window, click the Nuendo menu “Devices”  “NUAGE MASTER Setup.” Added support for remote operation of the AD8HR remote preamp (Nuage Fader) Overview The gains of the AD8HR connected to the Nuage I/O can be controlled. • Press and release [PRE] on the SECTION CONTROL section, and then press [Sub parameter 2]. This lets you control the “HA GAIN” and “HA TRIM” of the input channels connected to the AD8HR with the [Multi function knob].
PAGE 5
Setting up the Nuage I/O Operation Function HA +48V Turns +48 V phantom power on and off. To turn on phantom power, hold down the [Multi function button A] for longer than two seconds. Open the “Nuage I/O Properties” from the NUAGE Workgroup Manager, and then set the “ID” number of the AD8HR.
PAGE 6
Added the display in the [Channel name display] (Nuage Fader) The whole name of the channel strip can be scrolled and displayed, and the display format can be changed. When there is a long undisplayed portion of a channel strip name, the whole name of the selected channel strip can be scrolled and displayed only once if the channel strip is selected or the channel is scrolled using the [Touch slider bar].
PAGE 7
[ ]/[ ] (left/right) If you use the following functions when the channels displayed are fewer than the number of faders of the Nuage Fader (e.g., when you are using the Agent function, etc.), you can operate adjacent channels. Operation Function Simultaneously holding down [SHIFT] and pressing [ ] Displays channels from the left end of the console(s). Simultaneously holding down [SHIFT] and pressing [ ] Displays channels from the right end of the console(s).
PAGE 8
When the Select Track pop-up window is shown, the [input keys] have the following functions. [Input keys] Function [0] – [9] Inputs the track number to the input position. [BACK SPACE] Deletes the number at the input position. [CLEAR] Deletes all input numbers. [SET] Selects the Set mode (the button lights). [PREV -] Selects the previous track number. [NEXT +] Selects the next number. [CYCLE .] To select the additional track, input the number continuously after pressing this button.
PAGE 9
Added some editing operations (Nuage Master) The waveform offset can be changed, and the cut/copied event(s) can be pasted maintaining the position relative to the Project Cursor. Numeric Pad Input Selects the input format when you set the Project Cursor position in the Locate function. If you set this to “Right,” you can input the Project Cursor position as a text. DYN Page EDIT Section Title Bar Turns the “Bypass” switch that you touch on (lit) and off.
PAGE 10
Yamaha Pro Audio global web site: http://www.yamahaproaudio.com/ Yamaha Manual Library http://www.yamaha.co.jp/manual/ C.S.G.