UCB NS-P380 (NS-P380: NS-B380 + NS-C380 + NS-B280 + NS-SW380) 5.1CH SPEAKER PACKAGE 5.
IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
IMPORTANT SAFETY INSTRUCTIONS We Want You Listening For A Lifetime 1 IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2 IMPORTANT : When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used.
Precautions Please read the following operating precautions before use. Yamaha will not be held responsible for any damage and/or injury caused by not following the cautions below. 1. To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2. Install the speakers in a cool, dry, clean place – away from windows, sources of heat, sources of excessive vibration, dust, moisture or cold. Avoid sources of electrical humming (e.g.
Precautions This unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off. In this state, this unit is designed to consume a very small quantity of power. For U.K. customers If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below.
Contents Package contents................................................1 Installing the speakers.......................................2 Installing the front, center, and surround speakers ..........................................................2 Installing the subwoofer .....................................2 Wall-mounting the front and surround speakers ..........................................................3 Connecting the speakers .................................. 4 Connection diagram...........
Installing the speakers English Before you connect the speakers, place each speaker in its respective location. Speaker positioning is very important as it affects the overall sound quality of the system. Place the speakers in locations that will optimize the sound quality at your listening position. Refer to the illustration below. Installing the subwoofer Place the subwoofer on the outside of either the right or the left front speaker, as shown in A and B.
Installing the speakers Wall-mounting the front and surround speakers You can mount the front or surround speakers on a wall as follows. The front speakers can be mounted vertically or horizontally. 1 Install screws into a solid wall or wall support as shown below. Use 3.5 to 4 mm (1/8") diameter self-tapping screws. 2 Hang each speaker by its keyhole slots onto the protruding screws. Note Warnings • Each front speaker weighs 1.0 kg (2.2 lbs.) and each surround speaker weighs 0.45 kg (1 lbs.).
Connecting the speakers AC wall outlets before making any connections. Connection diagram Surround speakers Right Left Center speaker SPEAKERS SURROUND CENTER FRONT B D D/ OUT D-R (REC) OUTPUT Amplifier SUB WOOFR ANTENNA OUT DOCK DTV/CBL DVR SPEAKERS CENTER DTV/CBL DVD FRONT B HDMI COMPONENT VIDEO DVD MONITOR OUT AM PR GND DIGITAL INPUT VIDEO PB DVD DTV/CBL DVR IN OUT MONITOR OUT FM UNBAL.
Connecting the speakers ■ Preparing the speaker cables ■ Connecting the speakers Once you’ve positioned the speakers, you’ll need to cut the 25-meter (82 ft.) speaker cable to make five cables for connecting the two front speakers, center speaker, and the two surround speakers. Connect each speaker to the appropriate speaker terminals on your amplifier by using the cables you prepared earlier. See the “Connection diagram” on page 4 for reference.
Using the Subwoofer 1 3 4 Rear panel 1 Power indicator Lights up when the POWER switch is set to ON; goes off when the POWER switch is set to OFF. 2 INPUT jack Input jack for connecting the line-level subwoofer output on your amplifier. 3 VOLUME control Adjusts the volume of the subwoofer. Turn it clockwise to increase the volume; counterclockwise to decrease the volume. 4 POWER switch Set this to ON to turn on the subwoofer. Set it to OFF to turn off the subwoofer.
Troubleshooting If this product doesn’t work as expected, look for a possible cause below. If the issue you are experiencing is not listed, or you cannot resolve it after reading through these instructions, disconnect the power cable and contact an authorized Yamaha dealer or service center. Issue There’s no sound. The sound is very quiet. Possible cause The speaker cables are not connected properly. The speaker cables are not connected properly. Remedy Make sure the speaker cables are connected properly.
En cas de problème Si ce produit ne fonctionne pas selon vos attentes, recherchez-en une cause possible ci-dessous. Si vous ne trouvez pas la description de votre problème ou si les solutions préconisées ne permettent pas de le résoudre, débranchez le câble d’alimentation et contactez un revendeur ou un centre de service après-vente agréé par Yamaha. Le volume est très bas. Cause possible Remède Les câbles d’enceintes ne sont pas Vérifiez si les câbles d’enceinte sont branchés correctement.
