Installation Guide
Yamaha LC3 Installation Guide Contents Page LC3 Installation List of LC3 Controller Parts . . . . . . . . . . . . . . . . . 1 Step 1: Positioning of Instrument in Class . . . . . . 2 Step 2: Standard Installation of LC3 . . . . . . . . . . . 3 Split Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 LC3 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Other Optional Items . . . . . . . . . . . . . . . . . . . . . .
LC3 Installation List of LC3 Controller System Parts LC3 Class Hub with power adapter (Qty 1) lch3 music lab hub Instrument Box (Qty 9) Stereo Instrument Cables (Qty 9) IBX3 INSTRUMENT BOX LC3 Controller Unit (Qty 1) 9 17 10 18 11 19 12 20 13 21 14 22 15 23 16 24 25 33 41 26 34 42 27 35 43 28 36 44 29 37 45 30 38 46 31 39 47 32 40 48 Stereo Headphones with Microphones (Qty 9) RJ45 Lab Connector Cable 10 meters (Qty 10) Velcro strip pairs for Instrument Boxes (Qty 9) Note: If installi
Step 1: Positioning of Instruments in Classroom 1. With input from the instructor, determine where instruments will be placed. Some teachers want to see student hand positions in keyboard labs. Others want all students facing forward. 2. Determine the numbering system for instruments. The student buttons on the CONTROLLER are labeled 1-8 left-to-right. It might be helpful to arrange students in that order from the teacher’s perspective. (See illustration below) 3.
Step 2: Standard Installation LC3 1. Determine the position of the Hub in the room. Keep in mind that parts of the LC3 Lab must be connected to the hub so several cables will run to it. 2. Connect the headphone out of all instruments to the FROM INSTRUMENT input on their respective Instrument Boxes using the stereo instrument cables. 3. Plug a headset into the STUDENT 1 jacks on each Instrument Box. Plugs are marked with headphone and mic icons.
Split Mode If you would like to have two students at each instrument working independently of each other, all that is required is setting your instrument properly and adding additional Yamaha CM500 headset microphones to your system. Each student instrument must have the following settings made for SPLIT MODE to work properly: 1. Split Keyboard into two voices (sometimes called LEFT voice). 2. Octave shift both the RIGHT and LEFT voices.
Other Optional Items Con 1. CD or MP3 player. Use an external music player if you would like students to play along with a recording. 2. External Powered Speakers. If it’s necessary that the lab be heard in the room without headphones, external powered speakers can be added. 3. Student Computers. If your lab involves computers for recording audio from or playing audio to the students, use 1/8" stereo audio cables to get sound in and out of each Instrument Box.
©2009 Yamaha Corporation of America. All rights reserved. www.yamaha.
