MLC-200 Base Quick Set Up Guide Yamaha Music Lab October 2020
Prerequisite: Before beginning set up, you must have knowledge of installing and running Windows PC apps. Step 1. Download Software ML Config Tool (Windows/PC Only): https://usa.yamaha.com/support/updates/ml_config_tool.html Step 1.
Step 2. Unpack all boxes PKO1-MLC (Box 1/4) Includes: 1. 2. 3. 4. 5. 6. 7. 8. MLA-200 (x1) SWR2100P10G-MLC (x1) WIFIROUTER-MLC (x1) CAT5ELONG-MLC (x9) CAT5ESHORT-MLC (x2) WIRELESS HEADPHONE (x1) TRS CABLES (x9) SETUP GUIDE (x1) PKO2-MLC (Box 2/4) Includes: 1. CM500-MLC (Headphones x9) PKO3-MLC (Box 3/4) Includes: 1. MLA-200 (x8) PKO4-MLC (Box 4/4) Includes: 1.
Step 3. Set unit ID for all MLA-200 boxes (Teacher and Student boxes) Visit this link for an automatic Student Number Helper: https://usa.yamaha.com/products/musical_instruments/entertainment/mlc-200/setup.html#product-tabs Note that when the MLA-200 is in the upright position, the dip switches are upside down. Be sure to properly orient the MLA-200 while setting up unit IDs. MLA-200 Teacher and Students 1-9 are shown here.
Step 4. Connect all Cables Please refer to the Installation Guide for more detailed information.
Step 5. Connect Windows PC via Ethernet* Connect to any available port on the WIFI router (LAN Port). • Set Windows PC to obtain address automatically in the “Internet Protocol Version 4 (TCP/IPv4) Properties” dialog box (DHCP). Click “OK”.
Step 6.
Step 7.
Step 8. Test and Troubleshoot Using ML Touch iPad • Confirm MLA-200 Connection: - Use ML Touch app and “Connect All” - Confirm that the lights on the MLA-200 boxes turn on • Check Audio • Check Headphone/Microphone Sound *Should any MLA-200 boxes need to be replaced, you must run the ML Config Tool from step 6.
