UCA RX-E100 / CDX-E100 Natural Sound Stereo Receiver/Natural Sound Compact Disc Player Récepteur Stéréo/Lecteur Compact Disque L R OWNER’S MANUAL MODE D’EMPLOI Downloaded From Disc-Player.
SAFETY INSTRUCTIONS 6A CAUTION RISK OF ELECTRIC SHOCK DO␣ NOT OPEN 7 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
19 EXAMPLE OF ANTENNA GROUNDING For U.S. customers only: Outdoor Antenna Grounding – If an outside antenna is connected to this unit, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
SUPPLIED ACCESSORIES ACCESSOIRES FOURNIS • After unpacking, check that the following parts are contained. • Après le déballage, vérifier que les pièces suivantes sont incluses.
ENGLISH Thank you for purchasing this YAMAHA product. We hope it will give you many years of trouble-free enjoyment. For the best performance, read this manual carefully. It will guide you in operating your YAMAHA product. FEATURES • Minimum RMS Output Power per Channel 40 W + 40 W (6Ω, 20 - 20,000Hz, 0.
PRECAUTIONS: READ THIS BEFORE OPERATING THE UNIT CAUTIONS • • • • • • • • • • • • • • • • • • To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install your unit in a well ventilated, cool, dry, clean place – away from windows, heat sources, vibration, dust, moisture, or cold. To avoid humming sounds, locate the unit away from other electrical appliances, motors, and transformers.
GETTING STARTED This remote control controls a whole system: not only RX-E100 but also CDX-E100. Moreover, a cassette deck (KX-E100) and MD recorder (MDX-E100) that level up your system can be operated by it. Operating buttons for each unit are explained on the pages below: Receiver, RX-E100: CD player, CDX-E100: Cassette deck, KX-E100: MD recorder, MDX-E100: p.7 p.15 p.20 p.20 Notes • Use only AAA, UM-4, R03 batteries for replacement. • Be sure the polarities are correct.
GETTING STARTED Connecting the speakers Never plug the AC power cord to the wall outlet until all connections are completed. Follow the steps as shown below to connect the system using the supplied cords and accessories. Right speaker Left speaker 3 FM antenna 2 AM loop antenna 75 Ω UNBAL FREQUENCY STEP FM ANT B A GND AM ANT E R L L CD TAPE R OUT IN IN L SUBWOOFER SYSTEM CONNETOR AUX MD OUT R 6 Ω MIN./SPEAKER D C SPEAKERS 1 1 Connect the Speakers. 1 Unscrew the knob.
GETTING STARTED English Connecting the system Connecting RX-E100 and CDX-E100 1 2 3 Connect ‰ to ‰ using the RCA pin cable. Insert the plugs into the jacks of the same colour. Connect RX-E100 and CDX-E100 with the system control cable. The other SYSTEM CONNECTOR of CDX-E100 is for connecting MDX-E100 or KX-E100. Connect the AC power plug of CDX-E100 to AC OUTLET of RX-E100.
RX-E100 NAMES OF BUTTONS AND CONTROLS Front panel NATURAL SOUND STEREO RECEIVER RX-E100 VOLUME TIMER STANDBY DISPLAY MEMORY AUTO/MAN'L TIME ADJ TIMER PRESET/BAND PRESET/TUNING MIN STANDBY/ON HOUR BASS PHONES - ~ Ÿ ! ⁄ @ ¤ # ‹ $ + TREBLE MIN BALANCE - L + MAX INPUT R › VOLUME (P.8) % PRESET/TUNING / (P.9) HOUR/MIN (P.11) fi PRESET/BAND (P.9) ^ Display (P.6) fl Remote Control Sensor (P.3) & TIMER indicator (P.12) ‡ STANDBY indicator (P.8) STANDBY/ON (P.8) PHONES (P.8) DISPLAY (P.
RX-E100 NAMES OF BUTTONS AND CONTROLS SLEEP DISP TIME A REP RNDM D C PROG B PEAK E TAPE English Remote control ~ Ÿ ! ⁄ @ ¤ # ‹ $ SLEEP (P.13) DISP (Display) (P.11) A/B/C/D/E (P.10) POWER (P.8) Preset numbers (P.10) VOLUME + – (P.8) TAPE (KX-E100) (P.20) MD (MDX-E100) (P.20) AUX (The equipment connected to the AUX terminal) (P.5) › CD (CDX-E100) (P.16) % TUNER (RX-E100) (P.10) fi PRESET / (P.10) Note • #~fi are operation buttons and input selectors for each component.
RX-E100 BASIC OPERATIONS Listening to a source PHONES TREBLE 4 Play the source. (Refer to the owner’s manual supplied with each selected component.) 5 Adjust the volume level by turning VOLUME on the front panel or pressing VOLUME + on the remote control. 6 If desired, adjust BASS, TREBLE, and BALANCE.
TUNER OPERATIONS Manual tuning 1 Follow steps 1 and 2 described in “Automatic tuning.” 2 Press AUTO/MAN’L so that “AUTO” disappears from the display. 3 Press TUNING (For a higher frequency) or (For a lower frequency) to select your desired station. You can find radio stations automatically and manually.
TUNER OPERATIONS 5 Presetting stations The unit can preset station frequencies selected by Automatic tuning or Manual tuning. Up to 40 stations can be stored. With this function, you can select any desired station by pressing the corresponding preset station number.
USING THE BUILT-IN TIMER You must set the clock before you use the timer functions. The clock is based on a 24-hour system for Australia and General models, and 12-hour system for US, Canada, and General models. DISPLAY HOUR MIN Adjusting the brightness of the display You can adjust the brightness of the display.
USING THE BUILT-IN TIMER 3. Timer REC Select the recording component by turning INPUT. If you like to enjoy timer play with TUNER or AUX, select “REC Mode OFF”. Before using the timer If you want to use the cassette deck, KX-E100 or the MD Recorder, MDX-E100 for timer play or recording, you must first make the connections as shown in “Connecting the system” on page 5. For details, refer to the instructions supplied with the MDX-E100 or KX-E100. (Example) 4.
USING THE BUILT-IN TIMER 3 The unit will turn off automatically when the selected sleep time is reached. The unit can be turned off automatically at a selected SLEEP time. SLEEP SLEEP DISP TIME A REP B RNDM D C PROG E PEAK TAPE 1 Play the desired sound source. 2 Press SLEEP repeatedly until the desired sleep time appears in the display.
CDX-E100 NAMES OF BUTTONS AND CONTROLS Front panel NATURAL SOUND COMPACT DISC PLAYER CDX-E100 STANDBY/ON ~ STANDBY/ON (P.16) Ÿ Display (this page) ! $/! (Skip/Search Backward) ⁄/› (Skip/Search Forward) (P.16) ⁄ ^ (Play/Pause) (P.16) @ & (Stop) (P.16) ¤ (Open/Close) (P.16) # Disc Tray (P.16) Display REPEAT S F PROGRAM RANDOM 1 2 3 4 5 6 7 8 9 10 TITLE ARTIST TRACK CD-TEXT 11 12 13 14 15 16 17 18 19 20 ~ Ÿ ! ⁄ @ Multi-information Display * Pause indicator # Play indicator B Tape side indicator (P.
CDX-E100 NAMES OF BUTTONS AND CONTROLS DISP SLEEP TIME A REP RNDM D C PROG B PEAK E TAPE ~ Ÿ ! ⁄ @ ¤ # ‹ $ › % fi ^ English Remote control TIME (P.17) REP (Repeat) (P.18) PROG (Program) (P.18) RNDM (Random) (P.17) PEAK (Peak Search) (P.19) TAPE (P.22) POWER (P.16) Numeric buttons (P.16) CD input (P.16) $/! (Skip/Seach Backward) (P.16) ›/⁄ (Skip/Seach Forward) (P.16) ^ (Play/Pause) (P.16) & (Stop) (P.
COMPACT DISC PLAYER OPERATIONS 3 CD playback Press tray. to open the disc tray, and place a CD on the & ^ 100 X-E CD NATURAL SOUND COMPACT DISC PLAYER CDX-E100 D UN SO T AC MP CO C DIS YER PLA AL TUR NA /ON DBY STAN STANDBY/ON 4 Press ^ to start playback. The unit starts playback of the CD. To pause playback $/! ⁄/› STANDBY/ON DISP To stop playback PROG Press &. SLEEP TIME A REP B RNDM D PEAK Press ^. To resume play, press ^ again.
COMPACT DISC PLAYER OPERATIONS Random-sequence play The unit can play all the tracks in a random sequence. You can select any of four time displays by pressing TIME. When you play a CD with CD TEXT, the disc title, artist name, and track name are also displayed. DISP SLEEP TIME A REP DISP SLEEP TIME A REP B RNDM D PEAK RNDM D PEAK TIME C B C PROG RNDM E TAPE PROG E TAPE Press RNDM. • “RANDOM” appears on the display. The unit starts random sequence play.
COMPACT DISC PLAYER OPERATIONS Repeat play You can play any desired track or disc repeatedly. Press REP to select the repeat mode. SLEEP REP B RNDM D PEAK By creating a program, you can enjoy listening to your favourite tracks in any desired order. As many as 30 tracks can be programmed in sequence. DISP TIME A REP Program play SLEEP DISP TIME A C REP PROG PROG B RNDM D C PEAK PROG E TAPE E TAPE Numeric buttons VOLUME TAPE SINGLE REPEAT MD The current track is played repeatedly.
COMPACT DISC PLAYER OPERATIONS Peak level search Press &. Note • › or $ can be used during program play to skip to tracks within the program. This unit can find the peak sound level on the CD for optimum adjustment of the recording volume level. To check program data DISP SLEEP 1. 2. Press & to stop program play. Press PROG. Then each time you press › / $, the track number and the program number are displayed in the order of the program.
ADD KX-E100 AND/OR MDX-E100 TO YOUR SYSTEM Operating the cassette deck, KX-E100 and MD recorder, MDX-E100 with the remote control MDX-E100 DISP SLEEP TIME A REP RNDM D C PROG B PEAK E TAPE , ~ TIME (Same function as DISPLAY on MDX-E100 remote control) Ÿ REP (Repeat) ! PROG (Program) ⁄ RNDM (Random) @ POWER ¤ Numeric buttons # MD input ‹ MD REC/PAUSE $ $/! (Skip/Search Backward) › ›/⁄ (Skip/Search Forward) % & (Stop) fi ^ (Play/Pause) KX-E100 VOLUME MD AUX 1 2 3 4 5 6 POWER TAPE input TAPE RE
ADD KX-E100 AND/OR MDX-E100 TO YOUR SYSTEM When you record by using MDX-E100 or KX-E100, you must first make the connections as shown in “Connecting the system” on page 5. For details, refer to the instructions supplied with the MDX-E100 or KX-E100. A source from the component which is connected to the AUX terminal component can be recorded on a tape or MD. • Only the first track is recorded. After recording the CD tray opens automatically.
ADD KX-E100 AND/OR MDX-E100 TO YOUR SYSTEM TAPE Programming By specifying the length of the tape, the CD player, CDX-E100 programs tracks or helps you to program tracks so they will fit onto the tape with the least amount of unrecorded space remaining at each end of the tape. There are three ways of programming. 1 Manual TAPE programming 3 Press PROG to start programming. • “A B” appears in the display to indicate the direction of the tape. 4 Select the desired track number using numeric buttons.
ADDITIONAL INFORMATION • This compact disc player is designed for playing compact discs bearing the or mark only. Never attempt to load any other type of disc into the unit. The unit will also play 8-cm (3-inch) compact discs. • Compact discs are not affected by small particles of dust or fingerprints on their playing surface, but even so they should be kept clean. Wipe by using a clean, dry cloth. Do not wipe with a circular motion; wipe straight outward from the center.
ADDITIONAL INFORMATION SYMPTOM CAUSE REMEDY Excessive static in FM broadcasts. Interference from starting motor of a nearby car. Position the FM antenna as high and as far away from nearby roads as possible. Connect using a coaxial cable. Interference from the thermostat of a nearby electrical appliance. RX-E100 RECEIVER Noise increases during stereo broadcasts. Antenna input is too weak due to obstructions or excessive distance from the broadcasting station. Check the antenna connection.
ADDITIONAL INFORMATION English Specifications Amplifier section CD player section Minimum RMS output power per channel .............................................. 50 W + 50 W (6Ω 1kHz 0.07% THD) .................................. 40 W + 40 W (6Ω 20 - 20,000Hz 0.1% THD) DIN Standard output power per channel (Europe model) ................................................ 60 W + 60 W (4Ω 1kHz 0.7% THD) Input sensitivity/Impedance CD/TAPE/MD/AUX .....................................
YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.
