UA DRX-730 MICRO COMPONENT SYSTEM OWNER'S MANUAL
IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
FCC INFORMATION (for US customers) 1 IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2 IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
Caution: Read this before operating your unit. 1. To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2. Install this sound system in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 10 cm on the top, 10 cm on the left and right, and 10 cm on the back of this unit. 3.
■ Legal notices This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. ■ iPod™ “Apple,” “iPod,” and “iTunes” are trademarks of Apple Inc., registered in the U.S. and other countries.
DivX, DivX Ultra Certified, and associated logos are trademarks of DivX, Inc. and are used under license. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and DTS 2.0 + Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc.
Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . 2 2 2 3 4 5 6 Using Disc Navigator with DVD-Video, VCD, and SVCD discs . . . . . . . . . . . . . . . . .33 Using Disc Navigator with MP3, WMA, MPEG-4 AAC, DivX®, WMV, and JPEG discs . . . . . . . . . . . . . . . . . . . . . . . . . . .34 Viewing disc information . . . . . . . . . . . . . . . .35 Viewing the audio format . . . . . . . . . . . . . . . .35 2 Getting Started . . . . . . . . . . . . . . . . . 8 5 Using the Tuner . . . . . . . . .
Chapter 1: Introduction Thank your for choosing the Yamaha DRX-730 DVD Receiver. To get the most enjoyment from your new Yamaha product, please read this manual carefully, and keep it in a safe place for future reference. Supplied accessories The following accessories are included with the DRX-730. Make sure you have them all.
Chapter 1: Introduction Front panel 1 B 3 45 6 7 8 9J 1 TIMER HDMI PROGRESSIVE VOLUME INPUT STANDBY/ON USB PORTABLE PHONES K L M N A STANDBY/ON Sets the DRX-730 to on or standby (see page 16). B Open/Close ( ) Opens and closes the disc tray (see page 23). C TIMER LED Lights up when the DRX-730 is on standby and the timer is on (see page 42). D HDMI LED Lights up when the HDMI OUT is used (see page 53). E PROGRESSIVE LED Lights up when progressive video is being output (see page 53).
Chapter 1: Introduction Display A B C D SLEEP PRESET STEREO AUTO TIMER TUNED MEMORY E F G 8 DOCK SHUFFLE REPEAT MUTE PLAYLISTS ARTISTS ALBUMS SONGS GENRES N 9 J K L M A SLEEP Lights up when the sleep timer has been set (see page 20). I Information area Displays various information, such as input source, radio frequency, and the time. B PRESET Lights up when selecting radio presets (see page 39). J TIMER Lights up when the DRX-730 is on and the timer is on (see page 42).
Chapter 1: Introduction Rear panel 1 B MAINS HDMI 3 1 4 AM ANT GND FM ANT 75 UNBAL. CLASS 2 WIRING CABLAGE CLASSE 2 R PR PB Y R 6 MIN SPEAKER SPEAKERS SUBWOOFER OUT 5 6 OUT OUT VIDEO IN AUX DOCK 7 8 COMPONENT VIDEO OUT 9 OPTICAL DIGITAL J K A MAINS (power cable) H DOCK Connect the power cable to an AC wall outlet (see page 15).
Chapter 1: Introduction Remote control This section provides a brief description of the remote control’s buttons. 1 A Infrared transmitter Transmits control signals to the DRX-730 (see page 8). B STANDBY/ON ( ) Sets the DRX-730 to on or standby (see page 16). C Number buttons Enter numbers. STANDBY/ON OPEN/CLOSE B U 1 2 3 4 5 6 7 8 ZOOM ON SCREEN 9 0 3 4 5 6 7 8 ON BLUETOOTH AUDIO OFF SUBTITLE PLAY MODE ANGLE CLEAR a b c 9 TOP MENU J K V W X Y Z PRESET MENU d INFO.
Chapter 1: Introduction N AUTO/MANUAL Selects the Auto and Manual Tuning modes (see page 36). O BAND Selects the FM and AM radio bands (see page 36). P DVD/USB Selects the DVD and USB input sources (see page 16). Q AUX/PORTABLE Selects the AUX and PORTABLE input sources (see page 16). R SOUND e RETURN Returns to the previous menu. f VOLUME (+/–) Adjusts the volume (see page 17). 1 g TUNER Selects the TUNER input source (see page 16). h DOCK Selects the DOCK input source (see page 16).
Chapter 2: Getting Started This chapter explains how to install the batteries in the remote control and how to connect speakers and other components to the DRX-730. Installing batteries in the remote control 1 Push the tab on the battery compartment cover in the direction of the arrow and remove the cover. Notes: • If the operating range of the remote control decreases, replace all of the batteries with new ones. • Do not use old and new batteries together.
Chapter 2: Getting Started Connecting speakers Connect the NX-E700 speakers to the DRX-730 as shown below. Right speaker Left speaker 2 Speaker cables DRX-730 MAINS HDMI AM ANT GND FM ANT 75 UNBAL. CLASS 2 WIRING CABLAGE CLASSE 2 R PR PB Y R 6 MIN SPEAKER SPEAKERS SUBWOOFER OUT OUT OUT VIDEO IN AUX Notes: • Do not connect the power cable to the DRX-730 until all other connections have been completed.
Chapter 2: Getting Started Connecting speaker cables Speaker cables consist of two insulated wires running together. Speaker connections are polarized and use positive (+) and negative (–) terminals that are colorcoded red and black, respectively. To help you connect the wires correctly, the positive wire is usually marked with a stripe or some other identifier.
Chapter 2: Getting Started Connecting antennas Connecting the AM loop antenna To listen to FM and AM radio, you must connect the supplied antennas to the DRX-730. If radio reception is poor in your area or you want to improve reception, you can connect outdoor FM and AM antennas. Consult an qualified antenna installer in your area for more details. 1 Assemble the antenna’s stand as shown. If you intend to mount the antenna on a wall, you do not need to assemble the stand.
Chapter 2: Getting Started Connecting a TV Component video connection You can connect the DRX-730 to a TV by using any one of four different connection types: HDMI, component video, or composite video. The type you choose will depend on the connections supported by your TV. Refer to your TV owner’s manual for details. If your TV supports component video but not HDMI, you can connect the DRX-730 to your TV with a component video cable.
Chapter 2: Getting Started ■ HDMI audio output HDMI connection If your TV has an HDMI input, you can connect it to the DRX-730 with an HDMI cable and enjoy the best possible picture quality. Normally, the speakers connected to the DRX-730 are used to output the sound. However, you may want to listen through your HDMI TV’s speakers, in which case you can turn HDMI audio output on and off as follows. Using an HDMI cable (sold separately), connect the DRX-730’s HDMI jack to an HDMI input on your TV.
Chapter 2: Getting Started Connecting a recorder (CDR, MDR, etc.) You can connect a recording component, such as a CDR, MDR, or casette recorder, to the DRX-730 for recording and playback. 1 Using an audio pin cable (sold separately), connect the DRX-730’s AUX OUT jacks to the audio input on your recording component. 2 Using another audio pin cable (sold separately), connect the DRX-730’s AUX IN jacks to the audio output on your recording component. HDMI AM ANT GND FM ANT 75 UNBAL.
Chapter 2: Getting Started Connecting the power cable Once you’ve completed all of the other connections, connect the power cable to an AC wall outlet.
Chapter 3: General Functions This chapter explains functions that can be used with any input source. Turning on the DRX-730 STANDBY/ON STANDBY/ON ( Input source DVD DVD/USB1 button—To play a disc in the DRX-730 (see page 23). USB DVD/USB2 button—To listen to music or view pictures stored on a USB storage device connected to the USB port on the front panel (see page 45). TUNER TUNER button—To listen to the radio (see page 36).
Chapter 3: General Functions Adjusting the volume You can enjoy your music at a volume level you like. TOP MENU PRESET While listening to your music, you can temporarily mute the sound. MENU TOP MENU INFO. A E Muting the sound ENTER A E MENU INFO.
Chapter 3: General Functions Adjusting the bass and treble You can adjust the bass and treble to change the tone as you like. Adjusting the balance You can adjust the left and right sound balance. TOP MENU TOP MENU PRESET MENU A E ENTER A E RETURN SETUP A E ENTER MENU INFO. INFO.
Chapter 3: General Functions Pure Direct playback mode In Pure Direct playback mode, you can enjoy high quality audio playback. Using headphones You can use a pair of headphones to enjoy your music privately or when you don’t want to disturb others.
Chapter 3: General Functions Adjusting the display brightness Using the sleep timer You can adjust the brightness of the display to suit your room lighting. For example, you’re using the DRX-730 in a darkened room and the display is too bright. You can use the sleep timer to automatically stop playback and set the DRX-730 to standby after a specified period of time. For example, when you want to enjoy a movie or some music until you fall asleep.
Chapter 3: General Functions 6 Setting the clock To display the time or program the timer, you must first set the clock. TOP MENU PRESET MENU INFO. A E ENTER ENTER A E RETURN SETUP Press ENTER. The time is set and the display stops flashing. Notes: • To switch between 12- and 24-hour clock, while the time is being displayed, use Left/Right ( / ). • If the power cable is disconnected or there’s a power failure, the clock will continue working for approximately 5 minutes.
Chapter 3: General Functions Viewing the time Auto standby You can view the time while listening to a source. TOP MENU PRESET To save energy and prevent screen burn, you can set the DRX-730 so that it automatically goes on standby after 30 minutes of inactivity when using the DVD or USB input source. MENU INFO. A E ENTER A E TOP MENU RETURN SETUP VOLUME AUTO/ MANUAL PRESET MENU INFO.
Chapter 4: Playing Discs This chapter explains how to play discs. Using the on-screen display Playing discs When the input source is DVD or USB, you can operate various functions and settings by using the on-screen menus that appear on the connected TV.
Chapter 4: Playing Discs • With some discs, some of the playback functions explained in this chapter may not work as expected, and some may not work at all. • Some DVDs restrict the use of certain functions, for example, random playback or repeat playback, in some or all parts of the disc. This is not a malfunction. Pausing playback To pause playback, press Pause ( ). To resume playback, press Pause ( press Play ( ). You can also use Play/Pause ( to pause playback.
Chapter 4: Playing Discs Selecting chapters and tracks VCD and SVCD menus (PBC) To select the next chapter or track, press Next ( ). Some VCD and SVCD discs have PBC (Playback Control) menus from which you can select what you want to watch. To select the beginning of the current chapter or track, press Previous ( ). Press it again to select earlier chapters or tracks.
Chapter 4: Playing Discs Slow-motion playback Frame-by-frame playback ® You can play DVD-Video, VCD, SVCD, DivX , and WMV discs in slow motion at four different speeds. You can also play DVD-Video discs in reverse slow motion. ® You can play DVD-Video, VCD, SVCD, DivX , and WMV discs frame-by-frame. You can also play DVD-Video discs frame-by-frame in reverse.
Chapter 4: Playing Discs Selecting languages and audio Some DVD discs have soundtracks in multiple languages or audio formats, such as Dolby Digital and DTS, that you can select during playback. Similarly, some DVD-VR (VR mode DVD-R/RW/R DL) discs have dual-mono audio soundtracks, and some DivX discs have multiple audio soundtracks. Selecting subtitles ® Some DVD and DivX discs have subtitles in one or more languages that you can select during playback.
Chapter 4: Playing Discs Selecting camera angles Some DVD-Video discs have content recorded at multiple camera angles that you can select during playback. A camera icon ( ) appears on-screen when playing content that features multiple camera angles. You can turn this icon off if you prefer (see page 55). STANDBY/ON OPEN/CLOSE Zoom You can zoom the picture 2x or 4x when playing a DVD-Video, VCD, SVCD, DivX , WMV, or JPEG disc.
Chapter 4: Playing Discs Repeat playback A–B repeat playback You can play a title, chapter, track, or disc repeatedly. Repeat playback can be combined with program playback to play a compilation of your favorite titles, chapters, or tracks repeatedly (see page 30). You can specify two points (A and B) on a DVD, VCD, SVCD, or Audio CD, and then play the section between those two points repeatedly.
Chapter 4: Playing Discs Random playback Program playback You can play titles or chapters (DVD-Video) or tracks (VCD, SVCD, or Audio CD) in random order. ON BLUETOOTH You can create a program of your favorite titles, chapters, or tracks for playback. OFF ZOOM AUDIO SUBTITLE ANGLE 9 ON PLAY MODE PLAY MODE CLEAR AUDIO PLAY MODE TOP MENU ENTER PRESET OFF SUBTITLE PLAY MODE ANGLE CLEAR CLEAR MENU INFO. A E ON SCREEN 0 BLUETOOTH TOP MENU PRESET MENU A E ENTER INFO.
Chapter 4: Playing Discs 6 To play the program, press Play ( ). The items in the program are played in order. During playback, use Next ( ) and Previous ( ) to select subsequent and earlier items in the program. Searching Discs You can search discs by title, chapter, or track number, or by time. ■ Program menu options STANDBY/ON In addition to “Create/Edit,” the Program menu has the following options: Number buttons • Playback Start: Starts program playback.
Chapter 4: Playing Discs 5 Press ENTER to locate and play the specified title, chapter, track, or time. 6 To close the Setup menu, press SETUP. The following buttons can be used during slideshow playback. Button Note: • For DivX and WMV discs, the located time may differ from the specified time by a few seconds.
Chapter 4: Playing Discs Using Disc Navigator with DVD-Video, VCD, and SVCD discs The following items are available for each disc type. Disc Item DVD-Video You can use Disc Navigator to browse and select titles, chapters, and tracks on DVD, VCD, and SVCD discs.
Chapter 4: Playing Discs Using Disc Navigator with MP3, WMA, MPEG-4 AAC, DivX®, WMV, and JPEG discs 4 If you selected an MP3, WMA, MPEG-4 AAC, DivX , or WMV file, starting with that file, all of the files in the same folder will be played. ® You can use Disc Navigator to browse and select MP3, WMA, MPEG-4 AAC, DivX , WMV, and JPEG files on data discs. ® ZOOM 9 AUDIO ON SCREEN OFF SUBTITLE PLAY MODE TOP MENU ANGLE CLEAR PRESET MENU INFO.
Chapter 4: Playing Discs Viewing disc information Viewing the audio format You can view title, chapter, track, and other information during playback. You can view audio format during playback. VOLUME MEMORY AUTO/ MANUAL STANDBY/ON 2 1 5 3 6 9 ON OPEN/CLOSE AUDIO PLAY MODE TUNER AUX/PORTABLE DOCK SOUND PURE DIRECT MUTE 4 7 8 ZOOM ON SCREEN TIMER ON SCREEN 0 BLUETOOTH BAND DVD/USB SLEEP DIMMER DISPLAY DISPLAY OFF SUBTITLE ANGLE CLEAR 4 During playback, press DISPLAY.
Chapter 5: Using the Tuner This chapter explains how to use the tuner to listen to your favorite radio stations and how to store them as presets. ■ Tuner display indicators The following display indicators are used for tuning and presetting radio stations. A B C Tuning in to radio stations You can tune in to radio stations automatically or manually. Auto tuning In Auto Tuning mode, the DRX-730 searches for radio stations automatically. DE PRESET STEREO AUTO TUNED MEMORY A1 FM 100.
Chapter 5: Using the Tuner ■ Changing the frequency step Manual tuning In Manual Tuning mode, you can tune in to radio stations manually. (Asia and Taiwan models only) Depending on the frequency spacing used by radio stations in your area, you may need to change the Tuning Step setting. Play/Pause ( STANDBY/ON TOP MENU PRESET Stop ( ) ) MENU INFO.
Chapter 5: Using the Tuner Using presets Manual presetting You can store your favorite radio stations as presets so that you can select them more easily. You can store up to 40 presets, which are organized into 5 banks (A–E), with 8 stations (1–8) in each bank. Presets can be stored automatically or manually. In Manual Presetting mode, you can preset radio stations manually. TOP MENU Auto presetting PRESET MENU INFO.
Chapter 5: Using the Tuner Selecting presets Once you’ve preset a radio station, you can tune in to it simply by selecting the appropriate preset. STANDBY/ON Number buttons OPEN/CLOSE 1 2 3 5 6 7 8 ZOOM ON SCREEN 9 ON 4 0 BLUETOOTH AUDIO OFF SUBTITLE PLAY MODE TOP MENU ANGLE CLEAR PRESET MENU INFO.
Chapter 6: Using the Timer You can program the DRX-730’s timer to automatically start and stop playback at set times. You could, for example, use the DRX-730 like an alarm clock to wake up to your favorite radio station or music disc. 2 To use the timer, you must: Input sources are selected in the following order: 1. Set the input source. Use Left/Right ( / ) to select the input source. DVD DVD USB FM AM PRESET AUX PORTABLE DOCK 2. Set the on time. 3. Set the off time. 4. Turn on the timer.
Chapter 6: Using the Timer Setting the on time Setting the off time You can set the time at which you want the DRX-730 to turn on and start playback. TOP MENU You can set the time at which you want the DRX-730 to stop playback and go on standby. MENU PRESET TOP MENU INFO. INFO.
Chapter 6: Using the Timer Turning the timer on and off You can turn the timer on and off as you like and it will remember the settings. If you use the timer like an alarm clock, for example, you may want to turn it off while you’re on vacation. TOP MENU PRESET • If the DRX-730 is already on at the specified on time, the timer settings will have no effect. Likewise, if the DRX-730 is already off at the specified off time, they will have no effect. MENU INFO.
Chapter 7: Portable Device Playback This chapter explains how to enjoy content stored on a portable device, such as a music player, iPod, USB storage device, or Bluetooth-compatible music player or mobile phone. Music player playback You can connect a music player to the PORTABLE jack on the DRX-730’s front panel and enjoy the music stored on it through the DRX-730’s speakers in high quality.
Chapter 7: Portable Device Playback 4 Press DOCK to select the DOCK input source. “iPod connected” appears on the display. 5 Use the DRX-730’s remote control to play the music stored on your iPod. (Point it at the DRX-730, not your iPod.) ■ Playback control The following DRX-730 remote control buttons can be used to control iPod playback. Button Description Play ( ) Starts playback. In Simple mode, it works as Play/Pause.
Chapter 7: Portable Device Playback USB playback 2 Connect your USB storage device to the USB port on the DRX-730’s front panel. You can connect a USB storage device to the USB port on the DRX-730’s front panel and enjoy music (MP3, WMA, MPEG-4 AAC) stored on it through the DRX-730’s speakers in high quality. You can also play a slideshow of JPEG pictures. TIMER HDMI PROGRESSIVE Notes: • Not all USB storage devices are recognized.
Chapter 7: Portable Device Playback Playing a JPEG slideshow You can play a slideshow of JPEG pictures stored on a USB storage device. Press Play ( ) to start the slideshow. Using Disc Navigator with USB storage devices You can use Disc Navigator to browse and select MP3, WMA, MPEG-4 AAC, and JPEG files stored on a USB storage device. Starting with the first picture in the first folder, the slideshow displays every picture in every folder on the USB storage device in alphabetical order.
Chapter 7: Portable Device Playback ■ Bluetooth pairing Bluetooth playback With an optional Yamaha YBA-10 Bluetooth Wireless Audio Receiver connected to the DRX-730’s DOCK jack, you can enjoy the music stored on your Bluetooth device, for example, a Bluetoothcompatible music player or mobile phone, through the DRX-730’s speakers in high quality. You can also use the DRX-730’s remote control to control music playback on your Bluetooth device.
Chapter 7: Portable Device Playback 3 Use the DRX-730’s remote control, or the Bluetooth device’s controls to play the music stored on the Bluetooth device. To disconnect a Bluetooth device and make the DRX-730 non-discoverable, press BLUETOOTH OFF. The message “Disconnected” appears on the display. To connect to another Bluetooth device, you must first disconnect from the currently connected device, and then initiate a connection on the other Bluetooth device.
Chapter 8: Recording You can connect a recording component, such as a CDR, MDR, or casette recorder, to the DRX-730 for recording and playback. 1 Connect your recording component to the DRX-730. See “Connecting a recorder (CDR, MDR, etc.)” on page 14 for details. 2 Turn on the DRX-730 and recording component. 3 On the DRX-730, select the input source that you want to record. If you selected the DVD input source, load the disc you want to record. 4 Start recording on the recording component.
Chapter 9: Audio Settings and Video Adjust This chapter explains the Audio Settings and Video Adjust menus. Audio Settings menu MENU PRESET INFO. A E A E ENTER RETURN SETUP SETUP VOLUME AUTO/ MANUAL ENTER MEMORY BAND TUNER DVD/USB AUX/PORTABLE DOCK SOUND PURE DIRECT MUTE TIMER SLEEP The Audio DRC (Dynamic Range Control) function makes loud sounds quieter and quiet sounds louder, which is ideal for watching movies late at night when you don’t want to disturb anyone.
Chapter 9: Audio Settings and Video Adjust ■ Sharpness Video Adjust menu Adjusts the sharpness of edges in the picture. The Video Adjust settings affect the TV picture. • Fine, Standard (default), Soft. ■ Brightness Adjusts the brightness of the picture. TOP MENU MENU PRESET • –20 to +20 (default: 0) INFO. A E ■ Contrast Adjusts the contrast between the lightest and darkest areas of the picture.
Chapter 10: Initial Settings This chapter explains the Initial Settings menu. Initial Settings menu The Initial Settings menu contains digital audio output, video, language, display, and other settings. When a menu item is grayed out, it means that it cannot currently be changed. The Initial Settings cannot be changed during disc playback. You must stop playback first. 1 Select the DVD input source, and then press SETUP. The Setup menu appears on-screen.
Chapter 10: Initial Settings Video Output settings ■ TV Screen Sets the aspect ratio of the picture output by the analog and HDMI video outputs. Choose an option that matches the aspect ratio of your TV. • 4:3 (Letter Box) (default): Select if you have a conventional 4:3 TV. Widescreen movies will be displayed with black bars top and bottom. • 4:3 (Pan & Scan): Select if you have a conventional 4:3 TV. Widescreen movies will be displayed with the sides trimmed so that the picture fills the entire screen.
Chapter 10: Initial Settings 3 Press Play/Pause ( “HDMI CLEAR.” / ) repeatedly to select If you change your mind at this point, select “DVD — NO REQ.” instead. 4 Press STANDBY/ON. The HDMI Resolution is reset to its default setting and the DRX-730 goes on standby. Press STANDBY/ON again to turn it back on. The HDMI Audio setting (page 13) is set to off. ■ HDMI Color Sets the HDMI color output. • Full range RGB: Provides very bright whites and deep blacks.
Chapter 10: Initial Settings ■ Subtitle Display Determines whether DVD-Video disc subtitles are displayed by default. • On (default): Subtitles are displayed by default if available. • Off: Subtitles are not displayed by default. Note: • Some DVD-Video discs may forcibly display subtitles regardless of this setting. Display settings ■ OSD Language Sets the language of the on-screen menus.
Chapter 10: Initial Settings ■ Changing the password To change the password, you’ll need to enter the old password. 1 Select “Password,” and then press ENTER. 2 Use the number buttons to enter the old password, and then press ENTER. 3 Enter the new password, and then press ENTER. The new password is set. DivX® VOD ® To play DivX VOD (Video on Demand) files on the DRX-730, you may need to provide a DivX VOD registration code to your DivX VOD content provider.
Appendix Supported discs and formats The DRX-730 can play discs bearing the following logos: DVD-Video DVD-R DVD-RW DVD-R DL Copy Control CDs The DRX-730 conforms to the Audio CD standard. Operation and performance with discs that do not conform to this standard cannot be guaranteed. DualDisc A DualDisc is a double-sided disc with a DVD layer for video on one side and a CD layer that can be played in a standard CD player on the other.
Appendix ■ DVD+R/RW/R DL • The DRX-730 is compatible with DVD+R/RW and DVD+R DL (Dual Layer) discs recorded with the following formats: DVD-Video. • When playing content that’s been edited, playback may not follow the editing exactly. • Multisession discs are not supported. • Unfinalized discs cannot be played. See your disc recorder owner’s manual for details on finalizing. • Some discs may not play, may produce noise, or may sound distorted. This is due to the disc and is not a malfunction.
Appendix The DRX-730 supports the following language groups: Group 1 Albanian (sq), Basque (eu), Catalan (ca), Danish (da), Dutch (nl), English (en), Faroese (fo), Finnish (fi), French (fr), German (de), Icelandic (is), Irish (ga), Italian (it), Norwegian (no), Portuguese (pt), Rhaeto-Romanic (rm), Scottish (gd), Spanish (es), Swedish (sv) Group 2 Albanian (sq), Croatian (hr), Czech (cs), Hungarian (hu), Polish (pl), Romanian (ro), Slovak (sk), Slovenian (sl) Group 3 Bulgarian (bg), Byelorussian (be)
Appendix Looking after discs Storing discs Always keep discs in their cases and store them vertically in a place that’s not subject to extreme temperatures, extreme humidity, or direct sunlight. Always read the precautions supplied with the discs. Handling discs • Always hold discs by the edge to protect them against fingerprints, scratches, and dirt. • Discs with fingerprints, scratches, or dirt may not play properly.
Appendix Looking after the DRX-730 Resetting the DRX-730 You can reset the DRX-730 to its factory defaults. Installation • Place the DRX-730 on a stable surface close to your TV and the other AV components that you intend to use with it. Play/Pause ( STANDBY/ON • Do not place anything on top of the DRX-730. Stop ( ) ) TIMER HDMI PROGRESSIVE • Do not place the DRX-730 on top of your TV. And keep it away from components that are sensitive to magnetism, such as video recorders.
Appendix Language, country, and region lists Language list ■ Language (abbreviation), code number Japanese (ja), 1001 English (en), 0514 French (fr), 0618 German (de), 0405 Italian (it), 0920 Spanish (es), 0519 Chinese (zh), 2608 Dutch (nl), 1412 Portuguese (pt), 1620 Swedish (sv), 1922 Russian (ru), 1821 Korean (ko), 1115 Greek (el), 0512 Afar (aa), 0101 Abkhazian (ab), 0102 Afrikaans (af), 0106 Amharic (am), 0113 Arabic (ar), 0118 Assamese (as), 0119 Aymara (ay), 0125 Azerbaijani (az), 0126 Bashkir (ba),
Appendix Troubleshooting If you experience any issues while using the DRX-730, look them up in the following tables and try the suggested solution. If an issue is not listed, or you cannot resolve it yourself, contact your Yamaha dealer. General Issue The DRX-730 turns off as soon as it’s turned on. The speakers produce no sound. Possible cause Solution The power cable may not be connected properly. Make sure the power cable is connected to the AC wall outlet properly.
Appendix Issue Possible cause Solution The DRX-730 turned off unexpectedly. The sleep timer was set. Turn the DRX-730 back on again. The Auto Standby function automatically set the DRX-730 to standby. Check the Auto Standby setting (see page 22). One speaker is quieter than the other. The cables are connected incorrectly. Check the cable connections (see page 9). The volume can’t be increased or the sound is distorted. The component connected to the DRX-730’s AUX OUT jacks is turned off.
Appendix Playing discs Issue Possible cause Solution Some functions don’t work. Not all discs support all of the Try another disc. DRX-730’s disc playback functions. Playback won’t start, the picture or sound is noisy, or playback stops unexpectedly. The disc is not properly set on the disc tray. Place the disc, label-side up, in the center of the disc tray (see page 23). The disc is dirty. Check the disc and clean as necessary (see page 60). The loaded disc is not supported.
Appendix Issue Possible cause Solution The disc ejected as soon as it was loaded. The loaded disc is not supported. Use only supported disc formats (see page 57). The message “No Disc” is displayed even though a disc is loaded. The disc is not properly set on the disc tray. Place the disc, label-side up, in the center of the disc tray (see page 23). Can’t display the Setup, Initial These menus can be displayed only Settings, or Video Adjust menu. when the DVD input source is selected.
Appendix Tuner ■ FM/AM Issue Possible cause Solution Cannot select radio presets. The presets have been deleted. Preset the radio stations again (see page 38). The presets have been deleted. The DRX-730 has been disconnected from the AC wall outlet for more than a week. Make sure the power cable is connected properly, and then preset the radio stations again (see page 38). ■ FM Issue Reception is noisy. Possible cause Solution The FM antenna is not connected properly.
Appendix Timer Issue Possible cause Solution Can’t set the timer. The clock has not yet been set. Set the clock (see page 21). The timer didn’t work. The on and off times are set to the same time. Set the on and off times correctly (see page 41). iPod playback Issue iPod playback doesn’t work. Possible cause Solution The iPod is not seated in the Yamaha iPod universal dock properly. Make sure the iPod is seated in the Yamaha iPod universal dock properly (see page 43).
Appendix Issue Possible cause The message “NO USB” or “USB ERROR” is displayed. The USB device is not compatible, or the DRX-730 cannot supply enough power to the device for it to function properly. Solution Turn the DRX-730 off and on again. Set the DRX-730 to standby, disconnect the USB storage device, and then reconnect it. Select the USB input source, and then connect the USB device. Select a different input source and select USB again.
Appendix Specifications Amplifier section DVD section • Minimum RMS output power per channel (20 kHz Factory LPF) (6 Ω, 1 kHz, 0.9% THD)......................................... 20 W + 20 W • Maximum RMS output power per channel (20 kHz Factory LPF) (6 Ω, 1 kHz, 10% THD).......................................... 30 W + 30 W • Total harmonic distortion AUX, PORTABLE (20 kHz–LPF, 1 kHz, 1 W) . less than 0.05% • Input sensitivity/impedance AUX, PORTABLE (1 kHz, 20 W).........................
EX NX-E700 Speaker System Systeme D’enceintes Lautsprecheranlage Sistema de altavoces 揚聲器系統 OWNER’S MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG MANUAL DE INSTRUCCIONES 使用說明書 1
Thank you for selecting this YAMAHA NX-E700 speaker system. ACCESSORIES PRECAUTIONS Read this before using the speakers. • To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. • Install the speakers in a cool, dry, clean place – away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, motors).
When using a banana plug Loosen 3 Banana plug Tighten 1 Black (–) 2 Red (+) Red line 1 Remove the cover by pulling it toward you. 2 Tighten the terminal knob. 3 Insert the banana plug into the terminal. REMOVING THE FRONT COVER Speaker (R) Speaker (L) Red line The front cover is fastened to the enclosure at four point and can be removed if desired. To remove the cover, hold on to both sides and slowly pull straight away from the speaker.
This product mainly uses lead-free solder. Cet appareil utilise principalement de la soudure sans plomb. Dieses Produkt verwendet hauptsächlich bleifreies Lot. Este producto utiliza principalmente soldadura sin plomo. © 2005 YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA All rights reserved. ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR.
