Wi-Fi Kit Installation Guide
Contents What’s Included ...............................................................................................................................1 Setup Instructions ............................................................................................................................2 Notes ...............................................................................................................................................3 Troubleshooting Guide ........................................
Setup Instructions ® 1. Download the LC4 Controller apps for iPad from the App Store. If you’re reading this PDF on your iPad just click this link. 2. Connect the Wi-Fi Router to the LC4 hub’s Ethernet port with the supplied Ethernet cable. It should go from the Ethernet LAN port of the Router (<...>). 3. Connect the 1/8" to 1/8" cable, that comes packaged with the wireless headphones, from the teacher’s instrument box Student 2 Phones to the Audio Input jack on the wireless headset transmitter.
. Connect the iPad Wi-Fi to the Wi-Fi Router network named “LC4LAB.” This network is private (not publically visible) so not just anyone will be able to find and join it. To do this, click on the Settings icon on your iPad. Next, select Wi-Fi from the Settings menu. Select “Other.” Enter the network name “LC4LAB” (case sensitive) and choose security type WPA2 Personal. When prompted, enter the case-sensitive password: YamahaLC4.
Troubleshooting Guide Symptom Solution My LC4 is not detected by the app. Ensure that Wi-Fi Router is connected properly to the LC4 Hub via the Ethernet port. Ensure that the iPad is connected to the wireless network called “LC4LAB.” LC4 Controller app connects without an error but isn’t working properly. Close the app, restart the LC4 lab system (power off and back on from the hub) and then restart the app. “LC4LAB” network does not show in available networks on iPad Wi-Fi setting. This is normal.