User Manual

Table Of Contents

PX Series Firmware Update Guide 1

PX Series Firmware Update Guide

Thank you for choosing a Yamaha product.

This guide explains how to update the PX series (PX10, PX8, PX5, and PX3) firmware.

■ Precautions (Please be sure to read this section first!)

・ The user assumes full responsibility for the update.

・ Please note that the device may be damaged if you fail to follow these instructions properly, or turn off

the device or operate any control/function while the update is in progress.

・ If the update fails, and the device still does not operate correctly even after you execute the update once

again, please contact your Yamaha dealer.

・ Yamaha Corporation owns exclusive copyrights for the PX series firmware, its update program, and the

update guide.

・ It is prohibited to duplicate or modify the firmware, software or guides, in part or in their entirety, without

permission from the copyright owner.

・ The screen shots in this guide are for use with this update procedure only and may be different from the

actual screen shots.

・ The company names and product names in this document are the trademarks or registered trademarks of

their respective companies.

■ Preparing for the update

You will need the following items ready to execute the update procedure.

● Formatted (FAT32) USB flash drive

In the PX series unit, memory of 1GB or larger will be formatted in FAT32.

For formatting in a computer, refer to the documentations supplied with the computer or its OS.

● The PX series firmware

Download the latest firmware from the following URL.

http://www.yamahaproaudio.com/downloads/

PAGE 1
PX Series Firmware Update Guide Thank you for choosing a Yamaha product. This guide explains how to update the PX series (PX10, PX8, PX5, and PX3) firmware. ■ Precautions (Please be sure to read this section first!) ・ The user assumes full responsibility for the update. ・ Please note that the device may be damaged if you fail to follow these instructions properly, or turn off the device or operate any control/function while the update is in progress.
PAGE 2
■ Updating the PX series firmware Described below are the procedures to update the PX series unit firmware. The update files are consisted of the firmware file and the SP PRESET file. Uncompress the compressed file you downloaded before proceeding. 1. Connect the USB flash drive (formatted in FAT32) to the USB terminal on your computer. 2. Copy the “PX_PROG.BIN” (firmware file) and the “PX_SPP.
PAGE 3
After the update has finished and the PX series has been rebooted, the following screen will be displayed. 7. Use the Main knob to select “YES.” The IMPORT SP SELECT menu appears. After this step, refer to the Reference Manual for details. The firmware update is now complete.