Setup guide

ManualsBrandsYamaha ManualsAV receiversHTR-6066

Check that the following accessories are supplied with the product.

The following cables (not supplied) are required to build the system described in this

document.

• Speaker cables (depending on the number of speakers)

• HDMI cable (x2)

• Audio pin cable (x1)

• Digital optical cable (x1)

(not required if your TV supports ARC [Audio Return Channel])

1 Preparation

Accessories

 Remote control  Batteries

(AAA, R03, UM-4) (x2)

Insert the batteries the right way round.

 AM antenna  FM antenna  YPAO microphone

 CD-ROM

(Owner’s Manual)

 Safety Brochure  Easy Setup Guide

*The supplied FM antenna

varies depending on the

region of purchase.

Cables required for connections

Easy Setup Guide

English

AV Receiver

This document explains how to set up a 5.1- or 7.1-channel system and

play back surround sound from a BD/DVD on the unit.

To reduce the impact on natural resources, the Owner’s Manual for this product is

supplied on CD-ROM. For more information about this product, refer to the

Owner’s Manual on the supplied CD-ROM.

PDF versions of this guide and “Owner’s Manual” can be downloaded from the

following website.

http://download.yamaha.com/

[For U.S. customers only]

Visit the following website for additional information, FAQ’s, downloads such as

“Owner’s Manual” and product updates.

http://usa.yamaha.com/support/

Summary of content (8 pages)

PAGE 1
UA 1 Preparation AV Receiver Accessories Check that the following accessories are supplied with the product. Remote control Batteries (AAA, R03, UM-4) (x2) Insert the batteries the right way round. Easy Setup Guide AM antenna English To reduce the impact on natural resources, the Owner’s Manual for this product is supplied on CD-ROM. For more information about this product, refer to the Owner’s Manual on the supplied CD-ROM.
PAGE 2
Placing speakers Set up the speakers in the room using the following diagram as a reference. For information on other speaker systems, refer to “Owner’s Manual”. 5.1-channel system 7.
PAGE 3
Connecting speakers/subwoofer • Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6 Ω MIN”. For details, see “Setting the speaker impedance” in “Owner’s Manual”. 1 Connect the front speakers (1/2) to the FRONT (//\) terminals. 2 Connect the center speaker (3) to the CENTER terminal. • Use a subwoofer equipped with built-in amplifier.
PAGE 4
3 Connect the surround speakers (4/5) to the SURROUND (//\) terminals. 4 Connect the subwoofer (9) to the SUBWOOFER PRE OUT (1) jack. • Use a subwoofer equipped with built-in amplifier. EXTRA SP EXTRA SP EXTRA SP ZONE2/F.PRESENCE ZONE2/F.PRESENCE The unit (rear) The unit (rear) SPEAKERS SPEAKERS CLASS 2 WIRING CABLAGE CLASSE 2 CLASS 2 WIRING CABLAGE CLASSE 2 CENTER Connect the surround back speakers (6/7) to the SURROUND BACK (//\) terminals. ZONE2/F.PRESENCE The unit (rear) FRONT For 7.
PAGE 5
1 4 Connecting external devices a Connect a BD/DVD player to the unit with an HDMI cable. If the BD/DVD player is currently connected to the TV directly with an HDMI cable, disconnect the cable from the TV and connect it to this unit. TV Audio out (optical) HDMI in HDMI out HDMI HDMI BD/DVD player OPTICAL Connect external devices to the unit. b Connect a TV to the unit with the other HDMI cable. HDMI O b c HDMI OUT jack c Connect a TV to the unit with a digital optical cable.
PAGE 6
5 Optimizing the speaker settings automatically (YPAO) 1 The following screen appears on the TV. The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room. • During the measuring process, test tones are output at high volume. Ensure that the test tones do not frighten small children.
PAGE 7
3 4 Use the cursor keys to select “Save/Cancel” and press ENTER. Use the cursor keys to select “SAVE” and press ENTER. If “W-1:Out of Phase” appears Follow the procedure below to check the speaker connections. a Use the cursor keys to select “Result” and press ENTER. b Use the cursor keys to select “Wiring”. c Check the cable connections (+/–) of the speaker that was identified as being “Reverse” in the warning message.
PAGE 8
6 Playing back a BD/DVD Now let’s play back a BD/DVD. We recommend playing back multichannel audio (5.1-channel or more) to feel surround sound produced by the unit. Many more features! 1 VOL. HDMI1 RECEIVER SOURCE Press HDMI 1 to select “HDMI 1” as the input source. L SL SW C R SR HDMI 1 2 3 4 5 HDMI 1 V-AUX AV 1 2 3 4 AUDIO 5 6 1 TUNER USB NET MAIN 2 3 2 Press STRAIGHT repeatedly to select “STRAIGHT”.