AV Receiver Owner’s Manual Please read “Safety Brochure” before use.
CONTENTS Check the supplied items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 FEATURES Connecting playback devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Connecting video devices (such as BD/DVD players) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Connecting audio devices (such as a CD player). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PLAYBACK (continued) Listening to FM/AM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 Changing FM/AM tuner frequency steps (Asia and General models only). . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 Selecting a frequency for reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 Registering favorite stations (Preset tuning). . . . . . . . . . . . . . . . . . .
Check the supplied items Preparing the remote control • Insert the two supplied AAA batteries into the battery case, following the polarity markings (+ and -). Check that the following accessories are supplied with this product. ■ Remote Control ■ Batteries (AAA, R03, UM-4) (x 2) ■ YPAO microphone ■ VIDEO AUX input cover Operating range of the remote control • Be sure to aim the remote control within the following range at the remote control sensor on the unit during operation.
FEATURES What you can do with the unit Enjoying music stored on iPod or Bluetooth devices p.46, 53 Operating the iPod or USB menu (on TV) p.49, 55 Supports 2 to 7.1 channel speaker system. Allows you to enjoy favorite acoustic spaces in various styles. * Requires optional Yamaha products such as iPod dock, iPod wireless system, and Bluetooth receiver.
● Creating stereoscopic sound fields (p.39) Full of useful functions! ● Connecting various devices (p.18, 23) Various input/output jacks on the unit allow you to connect external devices such as BD/DVD player and CD player. The unit is also equipped with input jacks on the front panel which allow you easily connect and enjoy game consoles, camcorders and USB devices, and so on. The unit supports the surround playback of up to 7.1 channel.
Part names and functions Front panel NATURAL SOUND AV RECEIVER HTR-5064 DIRECT YPAO MIC INFO MEMORY PRESET FM AM TUNING VOLUME SCENE BD DVD PHONES SILENT CINEMA 1 (power) key Turns the unit on or into the standby mode. 2 Standby indicator When the unit is in standby mode, lights up in any of the following cases when: - The “Standby Through” function is working (p.74). - The iPod is charging with “Standby Charge” (p.62). - The Yamaha iPod wireless system is connected (p.48).
Front display (indicator) OUT ENHANCER ADAPTIVE DRC STEREO 3 TUNED SLEEP VOL. MUTE SW C L R SL SR SBL SB SBR 1 HDMI Lights up when an HDMI device is connected to the unit or an HDMI signal is being output. OUT Lights up when HDMI signals are output. 2 CINEMA DSP Lights up when a sound program with CINEMA DSP is activated. 3 CINEMA DSP 3D Lights up when CINEMA DSP 3D (p.39) is activated. 4 ENHANCER Lights up when the Compressed Music Enhancer (p.40) is activated.
Rear panel ARC HDMI OUT DOCK (BD/DVD) HDMI 1 HDMI 2 HDMI 3 HDMI 4 ANTENNA COMPONENT VIDEO HDMI 5 R FRONT L CENTER R SURROUND L SURROUND BACK/ BI-AMP R L SINGLE AM FM PR S VIDEO 75Ω PB VIDEO Y MONITOR OUT MONITOR OUT L SPEAKERS R OPTICAL COAXIAL AV 1 AV 2 COAXIAL (CD) AV 3 OPTICAL (TV) AV 4 AV 5 AV 6 AV OUT SUBWOOFER AUDIO (U.K.
1 Remote control signal transmitter Remote control Transmits infrared signals. 2 SOURCE (source power) Switches an external device on and off. CODE SET Select an input source on the unit to play back.
SETUP General setup procedure Perform the following 8 steps before use. 1 Speaker layout (p.12) Select the speaker layout depending on the number of speakers, and then place the speakers in the room. 2 Connecting speakers (p.15) Connect each speaker to the unit. 3 Connecting a TV (p.18) Connect TV to the unit. 4 Connecting playback devices (p.23) Connect video devices (BD/DVD players, etc.) or audio devices (CD players, etc.) to the unit. 5 Connecting the FM/AM antennas (p.
1 Speaker layout 2 3 4 5 6 7 8 1 Speaker layout Select the speaker layout depending on the numbers of speakers, and then place the speakers and subwoofer (with a built-in amplifier) in the room. The following section describes the representative speaker configuration of 2.1 to 7.1 channel system. NOTES • (U.S.A. and Canada models only) The unit is configured to 8Ω speakers as the factory setting. 6Ω speakers can be also connected.
1 Speaker layout 2 3 4 5 6 7 8 7.1-channel speaker layout 5.1-channel speaker layout 6.1-channel speaker layout 4.
1 Speaker layout 2 3 4 5 6 7 8 3.1-channel speaker layout 2.
1 2 Connecting speakers 3 4 5 6 7 8 2 Connecting speakers Connect speakers to the unit. Here are connections of 7.1- and 6.1-channel speaker layout as examples. If you select another channel speaker layout, connect speakers while referring to the connection of 6.1channel speaker layout. 7.1-channel speaker layout The unit (rear) R FRONT L CENTER 6.
1 2 Connecting speakers 3 4 5 6 7 8 ■ Connecting speaker cables Each speaker has two speaker cables. One is for connecting the - (negative) terminal of the unit and the speaker, and the other is for the + (positive) terminal. The cables are different colors, so they do not get mixed up. Connect the black side to the - (negative) terminal and the other side to the + (positive) terminal. 1 Remove approximately 10 mm (0.4 in.) of insulation from the end of the speaker cable and twist the bare wire firmly.
Cable plugs and jacks The unit is equipped with the following input/output jacks. Use jacks and cables appropriate for devices. Audio/video jacks Analog video jacks Audio jacks HDMI jacks COMPONENT VIDEO jacks OPTICAL jacks Digital videos and sounds are transmitted. Use an HDMI cable for connection. The signal is separated into three devices: Luminance (Y), chrominance blue (PB) and chrominance red (PR). Use a component video pin cable with three plugs.
1 2 3 Connecting a TV 4 5 6 7 8 3 Connecting a TV Connect a TV to the unit. The video signals input to the unit are output to the TV. TV audio can also be output from the unit. The recommended way to connect a TV varies depending on types and functions of video input jacks on the TV. Select how to connect the TV to the unit while referring to the TV manual. Does your TV support Audio Return Channel (ARC)? ■ Connection method 1 (ARC-compatible TV) Connect a TV to the unit with an HDMI cable.
1 2 3 Connecting a TV 4 5 6 7 8 2 Configure the settings for ARC. a Confirm that the ARC function for the TV is set to on. For details on how to confirm, refer to manual of the TV. b Change the input settings for the TV to video signals from the unit. SETUP RETURN URN RNN TOP For details on setting the HDMI control function, refer to the manual of each device. The unit and devices are also turned off automatically with the TV’s operation. If they do not turn off, turn them off manually.
1 2 3 Connecting a TV 4 5 6 7 8 ■ Connection method 2 (HDMI Control -compatible TV) Connect a TV to the unit with an HDMI cable and an optical cable. c Press SETUP. OPTION SETUP SETUP VOLUME ENTER • The following connection and steps are supplied, supposing the “HDMI” in the “Setup” menu has not been changed from the default setting (p.72). RETURN URN RNN TOP DISPLAY DIS D A Cursor keys ENTER POP UP d Press the cursor keys ( / ) to select “HDMI.
1 2 3 Connecting a TV 4 5 6 7 8 k Turn on the playback devices, and then confirm the following: Unit: Whether the input signals from the playback devices are selected as the HDMI input source (any of “HDMI 1-5”). When it is not selected, select the correct input source manually. TV: Whether the video signals from the playback devices are displayed on the TV screen. ■ Connection method 3 (TV with HDMI input jacks) Connect a TV to the unit with an HDMI cable and an optical cable.
1 2 3 Connecting a TV 4 5 6 7 8 ■ Connection method 4 (TV without HDMI input jacks) Connect a TV by any of the following connections depending on the input jack for TV video that is used. By switching the input source to “AV4” with AV4 on the remote control or SCENE (TV), TV sound is output from the unit.
1 2 3 4 Connecting playback devices 5 6 7 8 4 Connecting playback devices The unit is equipped with various types of input jacks such as an HDMI jack. Connect them to the appropriate output jacks on the playback devices. For connecting an iPod, Bluetooth devices and USB storage devices, refer to the following pages. ■ Component video connection Connect a video device to the unit with a component cable and an audio cable (an optical cable or a coaxial cable).
1 2 3 4 Connecting playback devices 5 6 7 8 ■ S-video connection ■ Analog video connection (U.K. and Europe models only) Connect video devices to the unit with a video pin cable and an audio cable (any of a coaxial cable, an optical cable and stereo pin cable.) Input jacks of the unit (AV3-6) are different depending on the audio input jacks of the video devices. Connect a video device to the unit with a S-video cable and an audio cable (an analog stereo cable).
1 2 3 4 Connecting playback devices 5 6 7 8 ■ Change the combination of input jacks (video/audio) When an input jack of the unit does not match an output jack of a video device, select another jack of the unit to match the jack of the video device. The Following connections become available with this setting.
1 2 3 4 Connecting playback devices 5 6 7 8 Connecting audio devices (such as a CD player) Connecting to the jack on the front panel Connect audio devices (such as a CD player, MD player and so on) to the unit. Select a correct connection depending on the output jacks of the audio devices connected to the unit. Use the VIDEO AUX jacks on the front panel to temporarily connect devices such as a video camera and a game console.
1 2 3 4 5 Connecting the FM/AM antennas 6 Connecting recording devices 7 8 5 Connecting the FM/AM antennas Connect supplied indoor FM antenna and an AM antenna. AM antenna 6 Connecting recording devices Use AV OUT jacks to connect video and audio recording devices. Selected incoming analog audio/video signals are output through AV OUT jacks. FM antenna • When recording video/audio of the video device, use AV5-6 jacks or VIDEO AUX (VIDEO/AUDIO) jacks of the unit to connect video devices.
1 2 3 4 5 6 7 Connecting the power cable 8 7 Connecting the power cable Before connecting the power cable (General model only) Set the switch position of the VOLTAGE SELECTOR according to your local voltage. Voltages are AC 110-120/220-240 V, 50/60 Hz.
1 2 3 4 5 6 7 8 Optimizing the speaker settings automatically (YPAO) 8 Optimizing the speaker settings automatically (YPAO) CODE SET SOURCE RECEIVER HDMI 1 2 3 4 RECEIVER V-AUX V VAUX 5 A AV 1 2 3 4 5 6 AUDIO DOCK TUNER USB FM AM INFO MEMORY MOVIE MUSIC PRESET ENHANCER TV CD DIRECT - After completing the connection of a TV, speakers, and so on, start YPAO RADIO - The test tone is output at a high volume while measuring. Please take care that The unit (front) measurement.
1 2 3 4 5 6 7 8 Optimizing the speaker settings automatically (YPAO) Starting the measurement CODE SET SOURCE RECEIVER 2 Confirm that “Save / Exit” is selected and then press ENTER. Start the measurement by following these steps. HDMI 1 2 3 4 • To confirm the measurement result, select “Result.” For details, refer to the V-AUX V VAUX 5 • YPAO measurement is not performed correctly when any obstacles are in the A AV 1 2 3 4 5 6 AUDIO DOCK “Confirming the measurement result” (p.31).
1 2 3 4 5 6 7 8 Optimizing the speaker settings automatically (YPAO) Confirming the measurement result CODE SET 2 Press the cursor keys ( Confirm the YPAO measurement result. HDMI 1 2 3 1 After measurement, press the cursor keys to select 4 V-AUX V VAUX 5 “Result,” and then press ENTER. A AV 1 2 3 4 5 6 AUDIO DOCK TUNER AM INFO MEMORY MOVIE MUSIC PRESET ) to select an item. Wiring Displays the condition of the polarity of each connected speaker.
1 2 3 4 5 6 7 8 Optimizing the speaker settings automatically (YPAO) Error messages If any error message is displayed during the measurement, resolve the problem and perform YPAO again. Error message can be confirmed and controlled by viewing both a TV monitor and the front display. ■ Procedure to exit YPAO 1 Check the contents of error message, and then press ENTER. 2 Press the cursor key ( ) to select “EXIT (Exit)” from the following choices, and then press ENTER.
1 2 3 4 5 6 7 8 Optimizing the speaker settings automatically (YPAO) Warning messages Even if any warning message is displayed after the measurement, you can save the measurement results. However, we recommend that you perform YPAO again for the optimal speaker settings. The speaker indicator that has a problem flashes. YPAO ENHANCER iPod CHARGE STEREO TUNED W-1:PHASE TV monitor SLEEP VOL.
PLAYBACK CODE SET SOURCE RECEIVER Basic playback procedure HDMI 1 2 3 4 V-AUX 5 AV 1 2 3 4 5 6 AUDIO DOCK TUNER Input selection keys USB FM AM INFO MEMORY MOVIE MUSIC PRESET TUNING INFO SUR. DECODE STRAIGHT ENHANCER SLEEP DIRECT SLEEP SCENE CD source, or select a radio station. Refer to the instruction manuals provided with the external device. RADIO OPTION VOLUME 1 Turn on external devices (TV, BD/DVD player, etc.) connected to the unit.
CODE SET SOURCE RECEIVER SOURCE/ RECEIVER Changing input settings with a single key (SCENE function) HDMI 1 2 3 4 V-AUX V VAUX 5 A AV 1 2 3 4 5 6 AUDIO DOCK TUNER USB FM AM INFO MEMORY MOVIE MUSIC PRESET ENHANCER TUNING TV CD 1 Press SCENE. 1 Do the following steps to select the settings that you RADIO SCENE • Selecting the input source (p.34) • Selecting the sound program (p.36) SCENE synchronization (p.
Enjoying the desired sound field effect CODE SET SOURCE RECEIVER HDMI 1 2 3 The unit is equipped with a variety of sound programs and sound decoders. Sound programs can make sounds richer, be played on the stereo and more. Choose a sound program that sounds best with the source you are playing back. 4 V-AUX V VAUX 5 A AV 1 2 3 4 5 6 AUDIO DOCK TUNER FM Selecting suitable sound programs for movies (p.37) USB AM PRESET INFO MEMORY MOVIE MUSIC TUNING SUR.
Enjoying sound field effects (CINEMA DSP) Adventure This program is ideal for precisely reproducing the sound design of action and adventure movies. The sound field restrains reverberations but puts emphasis on reproducing a powerful space expanded widely to the left and right. The reproduced depth is also restrained relatively to ensure the separation between audio channels and the clarity of the sound.
■ Sound programs/stereo reproduction suitable for audio contents (MUSIC) Include suitable sound programs for listening to music sources such as CDs. ❏ CLASSICAL Hall in Munich This sound field simulates a concert hall with approximately 2500 seats in Munich, using stylish wood for the interior finish as a normal standard for European concert halls. Fine, beautiful reverberations spread richly, creating a calming atmosphere. The listener’s virtual seat is at the center left of the hall.
■ Enjoying more spatial sound fields (CINEMA DSP 3D) CODE SET SOURCE RECEIVER The CINEMA DSP 3D creates virtual speakers by using front speakers, center speakers and surround speakers, which brings you into a stereoscopic sound field.
Playback without sound field effects (straight decoding mode) CODE SET SOURCE RECEIVER HDMI 1 2 3 By using the straight decoding mode, sounds from each channel included in input sources are output from each speaker without sound field processing. When 2-channel sources such as CD are selected, they are played back by stereo sound through the front left and right speakers.
Listening to FM/AM CODE SET SOURCE RECEIVER HDMI 1 2 3 When tuning a radio, select a frequency or a registered station. 4 V-AUX V VAUX 5 A AV 1 2 3 4 5 6 AUDIO DOCK TUNER FM TUNER FM AM USB • To tune into the radio station, connect the antenna in advance (p.27). • When the radio cannot get good reception, adjust the orientation of the antenna.
■ Receiving an FM broadcast that has a poor signal CODE SET SOURCE RECEIVER It may be possible to receive an unstable FM broadcast by switching from stereo receiving to monaural receiving. HDMI 1 2 3 4 V-AUX V VAUX 5 1 Press MODE. A AV 1 2 3 4 5 6 AUDIO DOCK TUNER USB FM AM INFO MEMORY MOVIE MUSIC PRESET TUNING TUNER PRESET VOL. TUNED FM Mode:Mono SUR. DECODE STRAIGHT ENHANCER SLEEP By pressing MODE, the receiving mode is switched to monaural or stereo.
■ Registering stations manually CODE SET Select stations manually and register them to the preset numbers. SOURCE RECEIVER 1 Tune the station that you want to register, referring to “Selecting a frequency for reception” (p.41). 2 Press MEMORY for 2 seconds or longer. HDMI 1 2 3 4 V-AUX V VAUX 5 A AV 1 2 3 4 5 6 AUDIO DOCK TUNER USB FM AM INFO MEMORY MOVIE MUSIC PRESET TUNING TUNER PRESET MEMORY SUR.
Radio Data System tuning CODE SET Frequency SOURCE RECEIVER (U.K. and Europe models only) HDMI 1 2 3 4 V-AUX V VAUX 5 A AV 1 2 3 4 5 6 AUDIO DOCK TUNER USB FM AM INFO MEMORY TUNER TUNING INFO SUR.
4 Press ENTER to start the search function. CODE SET 1 2 3 OPTION READY HDMI 4 ENHANCER iPod CHARGE SLEEP STEREO TUNED PL L SL SW C PR R SR A AV 1 2 3 4 5 6 AUDIO DOCK TUNER FM USB TUNER AM PRESET INFO MEMORY MOVIE MUSIC TUNING The transmission search will begin upward from the current frequency in approximately 5 seconds. Or, when the status indicator reads “READY,” you can begin the search immediately by pressing ENTER. SUR.
Playing back songs with iPod By using the USB cable supplied with iPod, optional Yamaha iPod universal dock (such as YDS-12) or optional Yamaha iPod wireless system (YID-W10), play back songs from connected iPod with the unit. • In this manual, both iPod and iPhone are collectively represented as “iPod.” When there is no explanation ■ Using a USB cable to connect an iPod Connect the iPod to the unit with the USB cable supplied with the iPod.
2 Connect the USB cable to the USB port on the front CODE SET panel. SOURCE RECEIVER Procedure Connect an iPod as follows. Refer to the manual for iPod dock also. HDMI 1 2 3 4 PHONES INPUT USB TONE CONTROL • For connecting iPhone, use the YDS-12. V-AUX V VAUX 5 SILENT CINEMA iPod/iPhone A AV 1 2 3 4 5 6 AUDIO DOCK TUNER USB 1 Turn the unit to the standby mode, and then connect the iPod dock to the DOCK jack. DOCK USB Keep the iPod dock as far away from the unit as possible.
■ Using the iPod wireless system to connect an iPod CODE SET SOURCE RECEIVER Connect the iPod to the unit with the optional Yamaha iPod wireless system. HDMI 1 2 3 4 3 Connect the iPod to the iPod wireless system (transmitter). Wait for a while until the following display appears on the front display. V-AUX V VAUX 5 VOL.
Controlling while watching a TV monitor CODE SET SOURCE RECEIVER When connecting iPod with a USB cable or iPod dock, iPod can be controlled with the TV monitor. HDMI 1 2 3 4 2 Press the cursor keys to select the content, and then press ENTER to confirm the selection. After selecting a song, playback starts and the Now Playing view appears.
■ Browse view CODE SET ■ Now Playing view SOURCE RECEIVER HDMI 1 2 3 4 V-AUX V VAUX 5 A AV 1 2 3 4 5 6 AUDIO DOCK TUNER USB FM AM INFO MEMORY MOVIE MUSIC PRESET TUNING SUR. DECODE STRAIGHT ENHANCER SLEEP DIRECT SCENE BD DVD TV CD RADIO OPTION SETUP 1 Play icon 1 Play icon VOLUME ENTER RETURN ENTER RETURN DISPLAY A TOP MENU POP-UP MENU MUTE MODE Settings for shuffle playback and repeat playback (p.51) and playback status (playback/pause) are displayed.
■ Controlling with the remote control CODE SET HDMI 1 2 3 Available remote control keys A AV 1 2 3 4 5 6 AUDIO DOCK TUNER USB FM AM INFO MEMORY DOCK USB ENHANCER DIRECT VOL. Parameters L SL SW C R SR Explanations Off Turns off the shuffle function. Songs Plays back songs in random order. Shuffle icon appears on the Now Playing view (p.50). Albums Plays back albums in random order. Shuffle icon appears on the Now Playing view (p.50).
Controlling by iPod itself CODE SET SOURCE RECEIVER Control iPod to play contents. HDMI 1 2 3 1 Press MODE. 4 V-AUX V VAUX 5 A AV 1 2 3 4 5 6 AUDIO DOCK TUNER The display on the TV monitor disappears, and then operations can be controlled by the iPod. Press MODE again to return to the TV display (the Browse view.) USB FM AM INFO MEMORY MOVIE MUSIC PRESET TUNING 2 Select the content with the iPod, and then start SUR. DECODE STRAIGHT ENHANCER SLEEP playback.
Playing back songs with Bluetooth devices CODE SET SOURCE RECEIVER HDMI 1 2 3 4 V-AUX V VAUX 5 A AV 1 2 3 4 5 6 AUDIO DOCK TUNER DOCK USB FM AM INFO MEMORY MOVIE MUSIC PRESET MEMORY ENHANCER OPTION VOLUME ENTER eight Bluetooth devices. When the ninth device is paired, the pairing setting for the devices.) Once pairing is completed, communication between the Bluetooth device device which has not been used for the longest period will be deleted.
4 Select the Bluetooth wireless audio receiver from CODE SET the Bluetooth device list, and then enter a pass key “0000.” SOURCE RECEIVER HDMI 1 2 3 4 When the pairing is completed, “Completed” appears. V-AUX V VAUX 5 DOCK A AV 1 2 3 4 5 6 AUDIO DOCK TUNER DOCK L SL AM INFO MEMORY MOVIE MUSIC PRESET SLEEP TUNING R SR VOL. BT connected L SL SW C R SR • Depending on Bluetooth devices, “BT connected” appears after pairing.
Playing back songs with USB storage devices CODE SET SOURCE RECEIVER HDMI 1 2 3 When a USB device is connected to the unit, audio files in the device, such as WAV (PCM format only), MP3, WMA and MPEG-4 AAC, can be played back. 4 V-AUX V VAUX 5 A AV 1 2 3 4 5 6 AUDIO DOCK TUNER FM USB USB Controlling while watching a TV monitor While watching a TV monitor, selecting songs and playback are operated.
CODE SET ■ Browse view ■ Now Playing view 1 Play icon 1 Play icon SOURCE RECEIVER HDMI 1 2 3 4 V-AUX V VAUX 5 A AV 1 2 3 4 5 6 AUDIO DOCK TUNER USB FM AM INFO MEMORY MOVIE MUSIC PRESET TUNING SUR. DECODE STRAIGHT ENHANCER SLEEP DIRECT SCENE CD RADIO OPTION VOLUME ENTER RETURN ENTER RETURN DISPLAY A TOP MENU POP-UP MENU Cursor keys MUTE Settings for random playback and repeat playback (p.57) and playback status (playback/pause) are displayed.
■ Controlling with the remote control CODE SET HDMI 1 2 3 Enables remote control keys A AV 1 2 3 4 5 6 AUDIO DOCK TUNER FM USB INFO External device operation keys MUSIC ENHANCER SLEEP DIRECT SCENE CD OPTION OPTION USB Searches backwards, while the button is pressed. RETURN POP-UP MENU MUTE MODE External device operation keys 1 2 5 6 9 0 3 Items ■ Repeat/random playback Make a setting for playing a USB device repeatedly or in random order.
Combining a song from a USB storage device (iPod) with video from an external device CODE SET SOURCE RECEIVER HDMI 1 2 3 4 V-AUX V VAUX 5 2 3 4 5 6 AUDIO DOCK TUNER USB FM AM INFO MEMORY MOVIE MUSIC PRESET USB TUNING SUR. DECODE STRAIGHT ENHANCER SLEEP TV CD POP-UP MENU MUTE MODE 1 2 5 6 9 0 3 TV INPUT TV VOL Cursor keys ENTER DISPLAY A TOP MENU A video signal input from HDMI1-5 is output. AV1-6 A video signal input from AV1-6 is output.
Configuring settings specific to an individual input source (Option menu) CODE SET SOURCE RECEIVER Depending on the input source, configure settings for the function related to playback. An operation for settings is possible with only the front display without using a TV monitor. Therefore, settings can be changed easily as needed. HDMI 1 2 3 4 V-AUX V VAUX 5 A AV 1 2 3 4 5 6 AUDIO DOCK TUNER FM • Only the available settings that can be applied to the selected input are displayed.
■ Tone Control ■ Enhancer Adjusts the balance of the high-frequency range (Treble) and low-frequency range (Bass) of sounds output from the front speakers. When headphones are connected, adjusts the balance of the high-frequency range and low-frequency range of sounds output from headphones. Enables/disables Compressed Music Enhancer (p.40). Input sources All (the setting is applied to all input sources) Choices High frequency range (Treble), Low-frequency range (Bass) Setting range -6.0 dB to + 6.
■ Extended Surround (EXTD Surround) ■ Signal Info Selects the 5.1 to 7.1-channel signal playback method when surround back speakers are used. Displays information on the current video and audio signals.
■ Standby Charge ■ iPod Interlock (Interlock) Sets whether or not to charge an iPod connected to the iPod dock or iPod wireless audio receiver while the unit is in standby mode. Sets whether operations for the iPod connected to the iPod wireless audio receiver are in linked with operations for the unit. Input sources DOCK (iPod) Input sources DOCK (iPod) Settings On (Default) Charges iPod when the unit is in standby mode. Off Does not charge iPod when the unit is in standby mode.
CONFIGURATIONS CODE SET SOURCE RECEIVER Configuring various functions (Setup menu) HDMI 1 2 3 4 V-AUX V VAUX 5 A AV 1 2 3 4 5 6 AUDIO DOCK TUNER The settings of the unit can be changed from the “Setup” menu displayed on the TV screen. AM INFO MEMORY PRESET TUNING ) to select an item (p.64) • Connect the unit and a TV with an HDMI cable to display the “Setup” menu. If the TV is not connected with an HDMI cable, reconnect it with an HDMI cable. SUR.
Setup menu list Menu Configuration Item Description Front Selects the size of the front speakers. 65 Center Selects the size of the center speaker and whether or not to use the speaker. 65 Surround Selects the size of the surround speakers and whether or not to use the speakers. 65 Surround Back Selects the size of the surround back speakers and whether or not to use the speakers. 65 Selects the phase of the subwoofer signals.
Configuring the speaker settings (Speaker) Adjust parameters for speakers manually. ❏ Surround Selects the size of the surround speakers and whether or not to use the speakers. Settings Large Select this when large surround speakers are connected. Small (Default) Select this when small surround speakers are connected. The subwoofer (or front speakers) will produce surround channel lowfrequency components. None Select this when no surround speakers are connected.
❏ Subwoofer ■ Distance Set whether or not to use a subwoofer. Separately adjusts the timing at which each speaker produce audio so that sounds from the speaker reach the listening position at the same time. Settings Use (Default) None Select this when a subwoofer is connected to the unit. During playback, the subwoofer will produce audio from the LFE (low-frequency effect) channel and bass audio from other channels. Select this when no subwoofer is connected to the unit.
5 Use the cursor keys ( ■ Equalizer Selects an equalizer type. “YPAO:Flat,” “YPAO:Front” and “YPAO:Natural” can be set after performing YPAO. Settings Through (Default) Disables the equalizer. Graphic EQ Uses the graphic equalizer to adjust sound quality manually. For details, refer to “Adjusting the graphic equalizer.” YPAO:Flat Sets uniform characteristics for each speaker. YPAO:Front Sets the characteristics of each speaker to match the front speakers.
Configuring the settings of audio output signals (Sound) Configuring the settings of audio output signals. ■ Dynamic Range Selects the dynamic range adjustment method for audio bit stream (Dolby Digital and DTS) signal playback. Settings Maximum (Default) Produces audio without adjusting the dynamic range. Standard Adjusts the dynamic range for optimum volume for regular home use.
Setting sound program and decoder parameters (DSP) Configuring the settings of sound programs and surround decoders. 4 Press the cursor keys to adjust the parameters, and then press ENTER. 5 If necessary, repeat step 3 to 4 to set other items. 6 Press SETUP to finish “Program.” • For details on sound program, refer to “Enjoying the desired sound field effect” (p.36). • Selectable items vary depending on the selected sound program or decoder.
❏ Category: MUSIC (except 2ch Stereo and 7ch Stereo) ■ When “ Sound programs Hall in Munich, Hall in Vienna, Chamber, Cellar Club, The Roxy Theatre, The Bottom Line Item DSP Level Description Changes the effect level (level of the sound field effect to be added). Item Decode Type DSP Level Description Setting Select a decoder to play back sources combined with a sound program. PLIIx Movie ( Neo:6 Cinema Changes the effect level (level of the sound field effect to be added).
Configuring the various settings (Function) Set the various features that have handy functions. 5 Press the cursor keys ( / ) to select “OK,” and then press ENTER. 6 To change other input names, repeat step 2 to 5. 7 Press SETUP to close “Input Rename.” • Select “CANCEL” in step 5 to return to the previous screen without confirming the name changed.
■ Memory Guard Setting HDMI functions (HDMI) Prohibits setting changes to prevent careless changes being made to the settings of the “Setup” menu, YPAO, and SCENE. Set the settings on HDMI functions. Settings Off (Default) Settings are not protected. On Prohibits changes to the settings in the “Setup” menu until it is returned to “Off.” During memory guard, the protection icon ( ) is displayed at upper right on the TV monitor.
❏ TV Audio Input ❏ SCENE Select the input source that receives audio signals from TV while the HDMI Control function is on. When using a TV that supports the Audio Return Channel function and the function is enabled, the audio input for the TV is assigned to the input source selected here. Specify whether or not a TV or external device (such as a BD/DVD player) connected to the unit is operated by interlocking by pressing SCENE.
■ Standby Through ❏ Resolution Specify whether or not audio/video signals from HDMI inputs are to continue to be transmitted to a TV when the unit is in standby mode. Select the resolution of HDMI output video signals. For details on conversion of video resolution, refer to “Video conversion table” (p.91). Settings Settings Off (Default) Does not output HDMI signals to a TV. Through No upscaling.
Setting the language displayed on the TV screen (Language) Selecting the language displayed on the TV screen. Settings English (Default) English Japanese Français French Deutsch German Español Spanish Russian • Only English is displayed on the front display. • Even if selecting a language in this item, the characters contained in the name of file, folder and song cannot be displayed in the selected language.
Configuring the system settings of the unit (ADVANCED SETUP menu) Operating the ADVANCED SETUP menu Looking at the front display to configure the system settings of the unit. 1 Switch the unit to the standby mode if the unit is turned on. 2 Press while pressing and holding STRAIGHT on the front panel. Changing the speaker impedance (U.S.A. and Canada models only) SP IMP. -8 MIN Changes the unit settings depending on the impedance of the speakers connected.
Setting the bi-amp connections BI-AMP - OFF Settings YES (Default) Enables the monitor check function. (Video output signals of a resolution not supported by the TV will not be transmitted.) SKIP Disables the monitor check function. (Video output signals of any resolution will be transmitted.) Switch the bi-amp connections of the front speakers on or off. Refer to “Connecting front speakers compatible with bi-amp connection” (p.16) for details.
CODE SET CODE SET SOURCE RECEIVER SOURCE/ RECEIVER HDMI 1 2 3 4 V-AUX V VAUX 5 A AV 1 2 3 4 5 6 AUDIO DOCK TUNER Controlling other devices with the remote control You can operate an external device such as a TV or BD/DVD player with the remote control of the unit by setting the remote control code for the external device (remote control code). Registering remote control codes for TV operations Register a TV remote control code to control the TV with the remote control.
■ Operating the TV with the remote control CODE SET CODE SET SOURCE RECEIVER HDMI 1 2 3 4 V-AUX 5 AV 1 2 3 4 5 6 AUDIO DOCK TUNER USB FM AM INFO MEMORY MOVIE MUSIC PRESET TUNING SOURCE/ RECEIVER Input selection keys HDMI 1-5 V-AUX AV 1-6 AUDIO DOCK TUNER USB When the remote control codes for the TV are registered, the TV can be operated at any time using the TV control keys, regardless of the selected input source. TV operation keys 3 Press an input selection key.
SOURCE CODE SET CODE SET SOURCE RECEIVER HDMI 1 2 3 4 V-AUX 5 AV 1 2 3 4 5 6 AUDIO DOCK TUNER USB FM AM INFO MEMORY PRESET TUNING SOURCE/ RECEIVER Input selection keys HDMI 1-5 V-AUX AV 1-6 AUDIO DOCK TUNER USB ENHANCER operation keys and numeric keys between the unit and external devices. The unit can be controlled when SOURCE/RECEIVER glows orange.
APPENDIX Frequently asked questions The new speaker system does not provide an ideal sound balance... I want to prevent accidental changes to the settings... If you have changed speakers or speaker system, perform YPAO to optimize the speaker settings again (p.29). If you want to adjust the speaker settings manually, use “Speaker” in the “Setup” menu (p.65). You can protect the settings configured on this unit (speaker settings, etc.) by utilizing “Memory Guard” in the “Setup” menu (p.72).
Troubleshooting Refer to the table below if the unit does not function properly. If the problem you are experiencing is not listed below, or if the instructions below do not help, turn off the unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. Confirm the following points first. a The power plugs of the unit, TV and external devices (such as a BD/DVD player) are plugged into the electric outlet securely.
Audio Problem No sound. The volume cannot be increased. No sound is output from one speaker. No sound is heard from the surround back speakers. No sound is heard from the subwoofer. No sound from a device connected using an HDMI cable. Cause Remedy No appropriate input source has been selected. Select an appropriate input source with the input selection key. Signals that the unit cannot reproduce are being input from a source device, such as a CD-ROM.
Problem Cause Remedy (When using HDMI Control function) The setting of “TV Audio Input” to match operations carried out on TV is not set. Select the appropriate audio input jack in “TV Audio Input” on the “Setup” menu. (When using the Audio Return Channel function) The Audio Return Channel function is not working. Set “ARC” in the “Setup” menu to “On” (p.73). Or, the Audio Return Channel function is activated on the TV. The TV is not ARC-compatible and connected to the unit only with an HDMI cable.
Problem The menu of the unit is not displayed. Cause Remedy The TV is connected to the unit with a cable except for HDMI cable. Use an HDMI cable to connect the TV to the unit. An appropriate video input is not selected on the TV. Select the input source of the TV to the video input from the HDMI OUT of the unit. Tuner (FM/AM) Problem FM stereo radio reception is noisy. Cause Remedy There is multi-path interference. Adjust the antenna height or orientation, or place it in a different location.
Message list Message (alphabetical order) Cause The unit cannot access your USB storage device or iPod. Access error There is a problem with the signal path from your USB storage device to the unit. Remedy Try another USB device or iPod. Turn off the unit and reconnect your USB storage device to the USB port of the unit. When an iPod is connected to the USB port, turn the iPod off and on.
Ideal speaker layout The following illustration indicates the ideal speaker layout. We recommend using the following layout as a guide when placing the speakers. However, by using YPAO, you can automatically optimize the speaker settings to suit your speaker layout. Turn it slightly inward to reduce wall reflections. 30 cm (1 ft.
Glossary Audio information Audio and video synchronization (lip sync) Lip sync, an abbreviation for lip synchronization, is a technical term that involves both a problem, and the capability of maintaining audio and video signals synchronized during post-production and transmission. Whereas the audio and video latency requires complex end-user adjustment, HDMI version 1.
DTS-HD High Resolution Audio DTS-HD High Resolution Audio is a high resolution audio technology developed for high-definition disc-based media including Blu-ray Disc. Selected as an optional audio standard for Blu-ray Disc, this technology delivers sound that is virtually indistinguishable from the original, offering a highdefinition home theater experience. Supporting bitrates up to 6.0 Mbps for Blu-ray Disc, DTS-HD High Resolution Audio can carry up to 7.
S-video signal With the S-video signal system, the video signal normally transmitted using a pin cable is separated and transmitted as the Y signal for the luminance and the C signal for the chrominance through the S-video cable. Using the S VIDEO jack eliminates video signal transmission loss and allows recording and playback of even more beautiful images. “x.v.Color” A color space standard supported by HDMI version 1.3.
Video signal flow ■ Video conversion table The video signals input from video devices to the unit are output to a TV. • Use “Processing” in the “Setup” menu to change the resolution and aspect ratio of video signals and output from the HDMI OUT jack. • The unit does not convert 480 line video signals and 576 line video signals interchangeably.
Information on HDMI HDMI Control Connecting the unit and TV with an HDMI cable links the TV’s remote control to the unit so you can use it to turn on the power and adjust the volume of the unit (HDMI Control). Playback devices connected to the unit with an HDMI cable (such as a BD/DVD player compatible with HDMI control) can also be operated with the remote control. For details on operations between the TV and the playback devices using the HDMI control function, refer to the manual for each device.
HDMI signal compatibility Trademarks Audio signals Audio signal types Audio signal formats Compatible media 2ch Linear PCM 2ch, 32-192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio, etc. Multi-ch Linear PCM 8ch, 32-192 kHz, 16/20/24 bit DVD-Audio, Blu-ray Disc, HD DVD, etc. DSD 2/5.1ch, 2.8224 MHz, 1 bit SACD, etc. Bitstream Dolby Digital, DTS DVD-Video, etc.
Specifications Input Jacks HDMI Tuner • Analog Audio...................... 4 (AV5, AV6, AUDIO, VIDEO AUX) • Input Front.................................................................. 1 (VIDEO AUX) Rear .......................................................................5 (HDMI1-5) • Analog Tuner FM/AM ..................................................................... 1 (TUNER) • Digital Audio Optical...................................................................2 (AV1, AV4) Coaxial ......
Audio Section • Rated Output Power (1 channel driven) [U.S.A. and Canada models] (1 kHz, 0.9% THD, 8 Ω) [Other models] (1 kHz, 0.9% THD, 6 Ω) Front L/R .....................................................................105 W/ch Center.........................................................................105 W/ch Surround L/R ..............................................................105 W/ch Surround Back L/R .....................................................
© 2011 Yamaha Corporation YD341A0/OMEN
UAB AV Receiver For more detailed information, refer to the Owner’s Manual on the CD-ROM. To view the Owner’s Manual, click on “English” in the screen displayed automatically when you insert the CD-ROM into your PC, or click on the model name if the screen to select models is displayed, and then click on “English” in the next screen. Then, follow the onscreen instructions. If the screen is not displayed automatically, open the “index.html” in the CD-ROM.
FCC INFORMATION (for US customers) 1 IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2 IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this sound system in a well ventilated, cool, dry, clean place - away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. For proper ventilation, allow the following minimum clearances.
Limited Guarantee for European Economic Area (EEA) and Switzerland Thank you for having chosen a Yamaha product. In the unlikely event that your Yamaha product needs guarantee service, please contact the dealer from whom it was purchased. If you experience any difficulty, please contact Yamaha representative office in your country. You can find full details on our website (http://www.yamaha-hifi.com/ or http://www.yamaha-uk.com/ for U.K. resident).
English 1 Preparation Accessories Check that the following accessories are supplied with the unit. AV Receiver Easy Setup Guide Remote control Batteries (AAA, R03, UM-4) x 2 Insert the batteries into the battery case in correct directions (+ and -).
2 Placing speakers Place the speakers in as shown below. Other layouts (except for 5.1-channel speaker layout and 7.1-channel speaker layout) are shown in the “Owner’s Manual.” 5.1-channel system 7.1-channel system 60° 60° 80° 80° 30 cm (1 ft.
3 Connecting speakers • (U.S.A. and Canada models only) The unit is configured to 8Ω speakers as the factory setting. 6Ω speakers can be also connected. • (Except for U.S.A. and Canada models) Use the speakers with an impedance of at least 6Ω. • Use a subwoofer with a built-in amplifier. 1 Connect the front speakers ( the FRONT ( / / ) terminals. FRONT L CENTER 2 Connect the center speaker ( ) to the CENTER terminal.
3 3 Connect the surround speakers ( to the SURROUND ( / / ) terminals. FRONT L CENTER 4 Connect the subwoofer ( ) to the SUBWOOFER jack. Before connecting the subwoofer, turn off the subwoofer. The unit (rear) R ) R SURROUND L SURROUND BACK/ BI-AMP L R SINGLE The unit (rear) R FRONT L CENTER R SURROUND L For the 7.1-channel system Connect the surround back speakers ( / ) to the SURROUND BACK ( / ) terminals.
1 Connect external devices to the unit. 4 Connecting external devices 1 Connect a BD/DVD player to the unit with an HDMI cable. If the BD/DVD player are connected to a TV directly with an HDMI cable, disconnect the cable from the TV and connect it to the unit. TV Audio output (Digital optical) HDMI input HDMI output HDMI HDMI BD/DVD player OPTICAL HDMI O 2 Connect the TV to the unit with an HDMI cable. 3 Connect the TV to the unit with an optical cable.
5 Optimizing the speaker settings automatically (YPAO) 1 Connect YPAO microphone to the YPAO MIC jack on the front panel. The following image is displayed on the TV screen. The YPAO microphone (supplied) detects the status of speaker connections and the distance between the speakers and the listening position, and adjusts the volume balance and the tone settings automatically (YPAO: Yamaha Parametric room Acoustic Optimizer). • The volume level is fixed to 0 dB while measuring.
3 Confirm that “Save / Exit” is selected, and then press ENTER. When “W-1: Out of Phase” appears Use the following procedure to check the speaker connections. Warning messages may appear depending on the types of speakers or the place where you set them even if they are connected correctly. 4 Confirm that “SAVE” is selected, and then press ENTER. a Press the cursor key to select “Result,” and then press ENTER. b Confirm that “Wiring” is selected.
6 Playing back a BD/DVD More various features! More various functions are available with the unit. Let’s play a BD/DVD disc. We recommend playing back a disc recorded with multi-channel sound (at least 5.1ch) to enjoy the surround sound effects enough. 1 Press HDMI1 to select “HDMI1” as the input source. CODE SET SOURCE RECEIVER Refer to the “Owner’s Manual” for details on effective use of the unit. Connecting external devices other than BD/DVD players (p.23) VOL.
List of remote control codes Liste des codes de commande Liste der Fernbedienungscodes Lista över fjärrstyrningskoder Elenco dei codici di telecomando TV A.R.
Crown 0058, 0161, 0171, 0179, 0320, 0323, 0343, 0349, 0350, 0351 CS Electronics 0277, 0340, 0342 CTC Clatronic 0341 CTX 0205 Curtis Mathes 0007, 0008, 0010, 0019, 0021, 0026, 0049, 0050, 0178 CXC 0058, 0179 Cybertron 0340 Cytron 0152 Daewoo 0007, 0008, 0026, 0037, 0053, 0167, 0266, 0275, 0277, 0282, 0315, 0320, 0323, 0331, 0335, 0342, 0343, 0350, 0381, 0465 Dainichi 0277, 0340 Dansai 0277, 0282, 0320, 0337, 0349, 0350 Dantax 0161, 0349 Dawa 0320 Daytron 0007, 0008, 0026, 0323, 0343 De Graaf 0346 Decca 0282
Infinity InFocus Ingelen Ingersol Initial Inno Hit Innovation Insignia Inteq Interactive Interbuy Interfunk International Intervision Irradio Isukai ITC ITS ITT ITV Janeil JBL JC Penney JCB Jensen JVC Kaisui Kamosonic Kamp Kapsch Karcher Kawasho KEC Kendo Kenwood KIC Kingsley 0010 0250, 0327, 0363, 0479, 0508 0347 0323, 0343 0153 0171, 0282, 0320, 0323, 0340, 0342, 0343, 0349, 0350 0337, 0343 0131, 0228, 0236, 0238 0030 0161 0323, 0343 0161, 0320, 0339, 0347, 0349, 0350 0277 0161, 0282, 0320, 0337, 0341,
Orion 0043, 0146, 0283, 0320, 0323, 0328, 0343, 0349, 0350 Orline 0320 Osaki 0282, 0320, 0337, 0340, 0342 Oso 0340 Otto Versand 0282, 0320, 0336, 0342, 0344, 0348, 0349, 0350 Pael 0277, 0342 Palladium 0161, 0282, 0320, 0342, 0351 Palsonic 0282 Panama 0277, 0282, 0320, 0323, 0337, 0342, 0343 Panasonic 0016, 0017, 0020, 0022, 0023, 0035, 0052, 0056, 0084, 0085, 0133, 0163, 0193, 0284, 0286, 0290, 0292, 0320, 0325, 0347, 0356, 0483 Panavision 0320 Pathe Cinema 0161, 0168, 0277, 0321, 0342 Pausa 0323, 0343 Pen
0252, 0254, 0326, 0343, 0344, 0371, 0374, 0457, 0475, 0486 Sound & Vision 0340, 0341 Soundesign 0008, 0026, 0031, 0058, 0059, 0179 Soundwave 0320, 0349, 0350 Squareview 0051 SSS 0008, 0058, 0179 Standard 0282, 0320, 0323, 0340, 0342, 0343, 0350 Starlite 0058, 0179, 0320, 0323, 0349 Stenway 0348 Stern 0346, 0347 Strato 0320, 0323 Stylandia 0282 Sunkai 0343 Sunstar 0320, 0323 Sunwood 0320, 0323, 0343, 0350 Superla 0277, 0282, 0342 Superscan 0013, 0178 SuperTech 0277, 0320, 0323 Supra 0323, 0343 Supre-Macy 005
Catron CGE Cimline CineVision Citizen Clatronic Colortyme Condor Craig Crown 1030 1026, 1027 1008, 1024, 1029 1104 1070, 1071 1008, 1030 1064 1009, 1025, 1030 1070, 1071 1008, 1009, 1025, 1029, 1030 Curtis Mathes 1064, 1068, 1070 Cybernex 1070 CyberPower 1016 Daewoo 1009, 1025, 1030, 1038, 1069, 1223 Dansai 1008, 1009, 1029 Dantax 1024 Daytron 1009, 1025 DBX 1064 De Graaf 1028 Decca 1026, 1027, 1028 Dell 1016 Denko 1008 DiamondVision 1096 DigiFusion 1014 DIRECTV 1019, 1105, 1110, 1111, 1113, 1116, 1122 Dis
Philips 1006, 1013, 1028, 1035, 1040, 1045, 1046, 1050, 1058, 1059, 1061, 1068, 1076, 1101, 1110, 1113, 1116, 1117, 1122, 1126, 1210, 1211 Philips Magnavox 1076 Phonola 1028 Pilot 1071 Pioneer 1028, 1036 Polaroid 1088, 1099 Portland 1009, 1025, 1030 Prinz 1026 Profex 1029 Proline 1026 Proscan 1019 Prosonic 1009, 1024 Pulsar 1114 Pye 1028, 1102 Quarter 1065 Quartz 1065 Quasar 1068 Quelle 1026, 1028 Radialva 1008 RadioShack 1071 RadioShack/Realistic 1065, 1068, 1069, 1070, 1071 Radiola 1028 Radix 1071 Randex
California Audio Labs 2151 Cambridge Audio 2354 CAT 2352, 2353 CAVS 2192 Centrum 2353 CGV 2354, 2362 Changhong 2140 Cinetec 2363 CineVision 2133, 2237 Clatronic 2358, 2367 Coby 2031, 2046, 2360 Conia 2383 Continental Edison 2363 Crown 2362 C-Tech 2355 Curtis Mathes 2139 CVG 2377 CyberHome 2022, 2098, 2138, 2187, 2336 Cytron 2244 Daenyx 2363 Daewoo 2001, 2133, 2276, 2298, 2330, 2362, 2363, 2377 Daewoo International 2363 Dalton 2357 Dansai 2362, 2381 Daytek 2184, 2195, 2363 Dayton 2363 DEC 2358 Decca 2362 Den
2212, 2269, 2272, 2299, 2304, 2305, 2306, 2307, 2308, 2309, 2310, 2311, 2344, 2345, 2347, 2379 Pointer 2362 Polaroid 2125, 2215, 2235 Portland 2362 Powerpoint 2363 Prima 2252 Proceed 2130 Proscan 2156 Prosonic 2360, 2377 Protron 2202 Provision 2358 Pye 2144 Qwestar 2148 Raite 2380 RCA 2021, 2029, 2104, 2105, 2131, 2149, 2156, 2157, 2229 RedStar 2356, 2360, 2362 Regent 2153 Reoc 2355 Rimax 2361 Rio 2133 Roadstar 2331, 2358 Ronin 2363 Rotel 2203 Rowa 2154, 2383 Rownsonic 2353 Saba 2148, 2188 Sabaki 2355 Saivo
Cable ABC 3002, 3003, 3017, 3066, 3067, 3086, 3093, 3119, 3122 ADB 3020 Adelphia 3081 Alcatel 3016 Americast 3124 Amstrad 3022, 3098 Antronix 3065, 3070 Archer 3070 Arcon 3098 AT&T 3095 Axis 3098 Bell South 3124 Cable Vision 3092 Cabletenna 3065 Cabletime 3104 Cableview 3087 Clearmaster 3127 ClearMax 3127 Clyde Cablevision 3105 Colour Voice 3068 Comcast 3084, 3088, 3117 Comcrypt 3107 Comtronics 3069 Contec 3074 Coolmax 3127 COX 3084 Cryptovision 3110 Director 3084 Eastern 3075 Everquest 3123 Fidelity 3098
Broco BSkyB BT Bubu Sat Bush Cambridge Canal Satellite Canal+ CaptiveWorks Channel Master Chaparral CHEROKEE Chess CityCom Clatronic CNT Comag 4217 4035, 4041 4216 4217 4006, 4045 4218 4213 4213 4099 4007, 4110 4075 4216 4212, 4217 4006, 4215, 4219 4013 4010 4080, 4081, 4082, 4083, 4086 Commlink 4005 Comtech 4050 Condor 4008, 4024, 4219 Connexions 4014, 4024 Conrad 4024, 4215, 4218, 4219 Conrad Electronic 4217, 4219 Contec 4050 Coolsat 4096 Cosat 4048 Coship 4109 Crown 4011 Daeryung 4014 Daewoo 4057, 4217
Mitsumi Morgan's Motorola Multichoice Multitec Muratto Mysat Navex Neuhaus Neusat Next Level NextWave Nikko Nokia Nordmende Nova Novis Oceanic Octagon Okano Optex Optus Orbitech OSat Otto Versand Pace Pacific Packsat Palcom Palladium Palsat Panasat Panasonic Panda Pansat Patriot Paysat PCT Philco Philips Phoenix Phonotrend 4054 4011, 4053, 4054, 4055, 4217 4019, 4088, 4090, 4091 4222 4212 4049 4217 4013 4009, 4048, 4217, 4218, 4219 4217 4019 4223 4011, 4217 4006, 4040 4001, 4006, 4007, 4010, 4052 4222 401
Xrypton XSat Zehnder Zenith Zodiac 4024 4217 4008, 4209, 4010, 4215, 4024 4102, 4107, 4195 4004 MD Yamaha XM 5080, 5081, 5086 Tape Yamaha CD Yamaha LD 5091, 5093 SIRIUS 5084, 5087 Yamaha Yamaha 2080 Amplifier 5064, 5067 Yamaha 5019, 5020, 5098 5082, 5095 Tuner CD Recorder Yamaha Yamaha Yamaha DOCK 5066, 5085, 5088, 5090, 5092 Yamaha Apple TV 5068, 5089 2241 “Apple TV” is a trademark or registered mark of Apple Inc.
