Owner’s Manual AV Receiver English for Asia*, Africa, Oceania and Latin America *Except for China
CONTENTS INTRODUCTION Features and capabilities ................................................... 3 About this manual............................................................. 4 Supplied accessories......................................................... 4 Part names and functions.................................................. 5 Front panel........................................................................ 5 Rear panel.........................................................................
INTRODUCTION Features and capabilities ■ Built-in high-quality, high-power 5-channel amplifier ■ 1-button input/sound field program switching (SCENE function) .......................26 ■ Speaker connections for 2- to 5.1-channel configurations – – – – Speaker channels and functions .................................................................................................................9 Speaker layout...................................................................................................
INTRODUCTION Features and capabilities About this manual • This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In case of differences between the manual and product, the product has priority. • “dHDMI1” (example) indicates the name of the parts on the remote control. Refer to the “Part names and functions” (☞p. 5) for the information about each position of the parts. • J1 indicates that the reference is in the footnote.
INTRODUCTION Part names and functions g AM Front panel h a A (Power) b c d e f Switches this unit between on and standby modes. YPAO MIC jack Connect the supplied YPAO microphone and adjust the speaker balance automatically (☞p. 21). INFO Changes the information shown on the front panel display (☞p. 7). MEMORY Registers FM/AM stations as preset stations (☞p. 32). J1 PRESET j / i Selects an FM/AM preset station (☞p. 33). J1 FM Sets the FM/AM tuner band to FM (☞p. 30).
INTRODUCTION Part names and functions Rear panel e AV1-5 jacks a HDMI OUT jack f b c d For connecting an HDMI - compatible TV to output audio/video signals to (☞p. 13). HDMI1-4 jacks For connecting external components equipped with HDMIcompatible outputs to receive audio/video signals from (☞p. 15). ANTENNA jacks For connecting AM and FM antennas (☞p. 20). COMPONENT VIDEO jacks For connecting TV that are compatible with component video signals, using three cables to output video signal (☞p. 13).
INTRODUCTION Part names and functions Front panel display g Cursor indicators a HDMI indicator h b c d e f Lights up during normal HDMI communication when any of the HDMI 1-4 inputs are selected. CINEMA DSP indicator Lights up when a sound field effect that uses CINEMA DSP technology is selected. Tuner indicator Lights up when receiving an FM/AM broadcast. SLEEP indicator Lights up when the sleep timer is activated (☞p. 8). MUTE indicator Flashes when audio is muted.
INTRODUCTION Part names and functions a Remote control signal transmitter Remote control Transmits infrared signals. b TRANSMIT Lights up when a signal is output from the remote control. a c SOURCE A (SOURCE Power) b c Switches an external component on and off. CODE SET TRANSMIT n SOURCE RECEIVER SLEEP p HDMI 1 2 3 4 3 4 o 1 d 2 AUDIO 5 V-AUX [ A ] 1 2 [ B ] [ C ] e FM INFO Operates the FM/AM tuner. These keys are used when using the tuner input.
CONNECTIONS Connecting speakers This unit uses acoustic field effects and sound decoders to bring you the impact of a real movie theater or concert hall. These effects will be brought to you with ideal speaker positioning and connections in your listening environment. ■ Surround left and right speakers Speaker channels and functions The surround speakers are for effect and vocal sounds with the 5.1-channel speakers providing reararea sounds.
CONNECTIONS Connecting speakers Speaker layout Connecting speakers 5.1-channel speaker layout (5 speakers + subwoofer) Connect your speakers to their respective terminals on the rear panel.
CONNECTIONS Connecting speakers ■ Connecting front speakers KE RS ■ Connecting center speakers / surround speakers 3 FR ON SU EA KE NT ER 1 1 3 4 2 3 4 SP ND CE T 2 1 RR OU ■ Connecting the subwoofer 2 Remove approximately 10mm of insulation from the ends of the speaker cables, and twist the bare wires of the cables together firmly so that they will not cause short circuits. Loosen the speaker terminals.
CONNECTIONS Connecting external devices ■ Audio jacks Cable plugs and jacks The main unit is equipped with the following input/output jacks. Use jacks and cables appropriate for components that you are going to connect. ■ Audio/Video jacks OPTICAL jacks COAXIAL jacks These jacks transmit optical digital audio signals. Use fiber-optic cables for optical digital audio signals. These jacks transmit coaxial digital audio signals. Use pin cables for digital audio signals.
CONNECTIONS Connecting external devices ■ Connecting an HDMI video monitor Connecting a TV monitor Connect the HDMI cable to the HDMI OUT jack. This unit is equipped with the following three types of output jack for connection to a TV. HDMI OUT, COMPONENT VIDEO or VIDEO. Select the proper connection according to the input signal format supported by your TV.
CONNECTIONS Connecting external devices ■ Connecting a video monitor Connect the video pin cable to the VIDEO (MONITOR OUT) jack.
CONNECTIONS Connecting external devices CODE SET TRANSMIT SOURCE Connecting BD/DVD players and other devices RECEIVER SLEEP HDMI 1 2 1 2 3 4 3 4 This unit has the following input jacks. Connect them to the appropriate output jacks on the external components. AV AUDIO 5 V-AUX [ A ] 1 2 [ B ] [ C ] Input jack TUNER FM AM INFO MEMORY PRESET TUNING ENHANCER SUR.
CONNECTIONS Connecting external devices ■ Connecting BD/DVD players and other devices with component cables ■ Component connections to analog audio output devices Connect the device with a component video cable to one of the AV1-2 input jacks. Component video / Audio output Using optical digital audio output sources Select the AV1 input that the external device is connected to for playback.
CONNECTIONS Connecting external devices ■ Connecting BD/DVD players and other devices with video cables Connect the external device with a video pin cable to one of the AV3-5 input jacks. Using analog stereo audio output sources Select the AV5 input that the external device is connected to for playback. Using optical digital audio output sources Select the AV4 input that the external device is connected to for playback.
CONNECTIONS Connecting external devices ■ Connecting CD players and other audio devices Using coaxial digital output sources Select the AV input (AV2 or AV3) that the external device is connected to for playback. Using analog stereo output sources Select the audio input (AUDIO1-2) that the external device is connected to for playback.
CONNECTIONS Connecting external devices Connecting video cameras and portable audio players Transmitting input A/V to external devices Use the VIDEO AUX jacks on the front panel to temporarily connect video cameras, game consoles, or portable audio devices to the receiver. Select the V-AUX input to use these connected devices. This receiver can transmit selected incoming analog audio/video signals to external devices through the AV OUT and AUDIO OUT jacks.
CONNECTIONS Connecting the FM/AM antennas An indoor FM antenna and an AM loop antenna are included with this receiver. Connect these antennas properly to their respective jacks. AM loop antenna Position the AM antenna away from the receiver. The wires of the AM antenna have no polarity. You can connect either wire to the AM jack or the GND jack.
CONNECTIONS Set up the speaker parameters automatically (YPAO) This unit is equipped with a YPAO (Yamaha Parametric Room Acoustic Optimizer) that adjusts the status, size, and volume balance of the speakers in order to provide an optimal sound field. Using YPAO allows you to automatically configure settings for which specialist knowledge is usually needed, such as adjusting speaker output and acoustic parameters to suit your listening room (the room in which this unit is placed).
CONNECTIONS Set up the speaker parameters automatically (YPAO) CODE SET TRANSMIT SOURCE RECEIVER This completes preparations. To achieve more accurate results, be careful of the following when measuring. SLEEP HDMI 1 2 1 2 3 4 3 4 AV • Measuring will take approximately three minutes. Keep the room as quiet as possible during measurement.
CONNECTIONS Set up the speaker parameters automatically (YPAO) CODE SET TRANSMIT SOURCE ■ When an error message appears RECEIVER SLEEP 1 2 3 4 3 4 Check the content of the message from the list of messages (☞p. 24) to resolve the problem, and carry out the measurement process again. AV 1 2 AUDIO 5 V-AUX [ A ] 1 2 [ B ] [ C ] YPAO TUNER FM INFO MEMORY MOVIE MUSIC VOL. E-9:CANCEL AM PRESET When “E-5” to “E-9” is displayed: during measurement HDMI TUNING ENHANCER SUR.
CONNECTIONS Set up the speaker parameters automatically (YPAO) ■ Message list E-5:NOISY NOTE If the following messages appear, resolve the problems that have occurred and carry out the measurement process again. The noise is too loud, preventing accurate measurements from being taken. ■ When a warning message appears before measurement Connect MIC! The YPAO microphone is not connected. Connect the YPAO microphone to the YPAO MIC jack on the front panel. Unplug HP! The headphones are connected.
PLAYBACK CODE SET TRANSMIT SOURCE Basic playback procedure RECEIVER SLEEP HDMI 1 2 3 4 3 4 AV 1 2 AUDIO 5 V-AUX [ A ] 1 2 [ B ] [ C ] d TUNER FM AM PRESET INFO MEMORY MOVIE MUSIC 1 2 Turn on external components (TV, DVD player, etc.) connected to this unit. Turn on this unit and select the input source using dInput selector. The name of the selected input source is displayed for a few seconds.
PLAYBACK Changing input settings with a single key (SCENE function) CODE SET TRANSMIT SOURCE RECEIVER SLEEP This unit has a SCENE function that allows you to turn the power on and change input sources and sound field programs with one key. HDMI 1 2 3 4 3 4 AV 1 2 AUDIO 5 V-AUX [ A ] 1 2 [ B ] [ C ] PRESET TUNING TUNER FM AM INFO MEMORY Four scenes are available for different uses, such as d playing movies or music.
PLAYBACK Enjoying sound field programs CODE SET TRANSMIT SOURCE RECEIVER SLEEP HDMI 1 2 3 4 3 4 AV 1 2 AUDIO 5 V-AUX [ A ] 1 2 [ B ] [ C ] ■ Enjoying unprocessed playback ■ Enjoying stereo playback (Straight decoding mode) Use straight decoding mode when you want to playback sound without sound field processing. You can playback as follows in straight decoding mode. 2-channel sources such as CD TUNER FM AM PRESET INFO MEMORY MOVIE MUSIC TUNING ENHANCER SUR.
PLAYBACK Enjoying sound field programs Sound field programs Action Game This sound field is suitable for action games such as car racing and FPS games. It uses reflection data that limits the effects range per channel in order to offer a powerful playing environment that makes the listener feel as if they are right there by enhancing various effects tones while maintaining a clear sense of directions. Roleplaying Game This sound field is suitable for role-playing and adventure games.
PLAYBACK Enjoying sound field programs ■ Category: STEREO Suitable for listening to stereo sources. 2ch Stereo Use this program to mix down multi-channel sources to 2 channels. When multi-channel signals are input, they are down mixed to 2 channels and output from the front left and right speakers. 5ch Stereo Use this program to output sound from all speakers. When you play back multi-channel sources, this unit down-mixes the source to 2 channels, and then outputs the sound from all speakers.
PLAYBACK FM/AM tuning CODE SET TRANSMIT SOURCE RECEIVER SLEEP HDMI 1 2 3 4 3 4 When using the FM/AM tuner, adjust the direction of the FM/AM antenna connected to this unit to get the best reception. AV 1 2 AUDIO 5 V-AUX [ A ] 1 2 [ B ] [ C ] d TUNER e FM AM INFO MEMORY MOVIE MUSIC PRESET TUNING ENHANCER SUR.
PLAYBACK FM/AM tuning CODE SET TRANSMIT SOURCE RECEIVER SLEEP 3 HDMI 1 2 1 2 3 4 3 4 AV AUDIO 5 V-AUX [ A ] 1 2 [ B ] [ C ] TUNER FM AM INFO MEMORY PRESET TUNING ENHANCER SUR. DECODE MOVIE MUSIC STEREO STRAIGHT Use eTUNING H / I to set a frequency to receive. eTUNING H Increases the frequency. Press and hold this key for longer than a second to search automatically for a station d on a higher frequency than the current one. J1 e eTUNING I Decreases the frequency.
PLAYBACK FM/AM tuning CODE SET TRANSMIT SOURCE RECEIVER SLEEP 4 HDMI 1 2 3 4 3 4 AV 1 2 AUDIO 5 V-AUX [ A ] 1 2 [ B ] [ C ] PRESET TUNING TUNER FM AM INFO MEMORY MOVIE MUSIC e Press jENTER, then press ePRESET F / G or jCursor B / C to choose the preset number from which to start the Auto Preset function. Auto Preset will begin approximately 5 seconds after you select a preset number.
PLAYBACK FM/AM tuning CODE SET TRANSMIT SOURCE ■ Recalling a preset station RECEIVER SLEEP 1 2 1 2 3 4 3 4 AV AUDIO 5 V-AUX [ A ] 1 2 [ B ] [ C ] To select a registered station, press ePRESET F / G to select the preset number of the d station. J2 PRESET TUNING e TUNER FM AM INFO MEMORY 4 You can call preset stations registered by automatic station preset or manual station preset.
SETUP CODE SET TRANSMIT SOURCE Configuring the settings specific for each input source (Option menu) RECEIVER SLEEP HDMI 1 2 3 4 3 4 This receiver has a unique option menu specific for each type of input source, such as volume trim for compatible input sources, audio/video data display for signals from external devices, and other frequently used menu items.
SETUP Configuring the settings specific for each input source (Option menu) ■ Combining HDMI/AV1-2 input source video and audio Audio In Input source: ■ Displaying information on audio/video signals Signal Info Input source: HDMI1-4, AV1-2 Combines video from HDMI or AV input sources with analog/ digital audio inputs in situations such as: – an external device is connected with an HDMI cable but cannot transmit audio through HDMI – an external device with component video output and analog audio output
SETUP Setting various functions (Setup menu) CODE SET TRANSMIT SOURCE RECEIVER SLEEP You can configure various function settings of this unit using the Setup menu. HDMI 1 2 3 4 3 4 AV 1 2 Setup menu display and settings AUDIO 5 V-AUX [ A ] 1 2 [ B ] [ C ] 1 TUNER FM AM INFO MEMORY MOVIE MUSIC PRESET TUNING Press iSETUP on the remote control. HDMI SETUP ENHANCER SUR.
SETUP Setting various functions (Setup menu) ■ Manual speaker setup Manages settings for speakers Config SETUP Adjusts the output characteristics of the speakers based on manually set parameters. VOL. Speaker Setup L SL SW C In the Config submenu, you can select the speaker size characteristic (Large or Small). Select the size (sound reproduction capacity) that matches your speakers.
SETUP Setting various functions (Setup menu) Crossover Sets the lower limit of low-frequency component output from speakers set to “Small.” Audio with a frequency below that limit will be produced from the subwoofer or the front speakers. J1 ■ Controlling the volume of each speaker Level Distance Separately adjusts the volume of each speaker. Use jCursor B / C to select the desired speaker and adjust the volume with jCursor D / E.
SETUP Setting various functions (Setup menu) ■ Adjusting sound quality with the equalizer Equalizer Adjusts sound quality of tone using a parametric or graphic equalizer. ■ Generating test tones 3 Raising volume: Press jCursor E. Lowering volume: Press jCursor D. EQ Select Select an equalizer type. PEQ GEQ Off Uses the graphic equalizer to adjust sound quality. By pressing jENTER, you can adjust the characteristics of the graphic equalizer. Does not activate the equalizer.
SETUP Setting various functions (Setup menu) Sound Setup Lipsync Adjusts the delay between audio and video output (Lipsync function). VOL. L SL SW C R SR HDMI Auto When connecting to a TV via HDMI, automatically adjusts output timing if the TV supports an automatic lipsync function. Sound Setup submenu Off (Default) Lipsync Adjusts the delay between video and audio output. Adaptive DRC Auto-adjusting the sound level to make even low volumes more audible. D.
SETUP Setting various functions (Setup menu) ■ Auto-adjusting Dolby Digital and DTS dynamic range D.Range Selects the dynamic range adjustment method for audio bitstream (Dolby Digital and DTS) playback. ■ Setting the startup volume Init.Volume Sets the initial volume for when this receiver is turned on. When this parameter is set to “Off,” the volume is set at the level when the receiver last entered standby mode. J1 Max (Default) Produces audio without adjusting the dynamic range.
SETUP Setting various functions (Setup menu) CODE SET TRANSMIT SOURCE Making the receiver easier to use RECEIVER SLEEP HDMI 1 2 3 4 3 4 3 AV 1 2 SETUP AUDIO 5 V-AUX [ A ] 1 2 [ B ] [ C ] Func. Setup L SL SW C R SR Func. Setup submenu AM PRESET INFO MEMORY MOVIE MUSIC Input Rename Changes the input source names. AutoPowerDown Goes into standby mode. Dimmer Sets the Brightness of the front panel display.
SETUP Setting various functions (Setup menu) ■ Goes enter standby mode automatically when you leave it without operating Setting sound field program parameters You can set the parameters for the sound field programs (☞p. 44). AutoPowerDown If you do not operate this unit or use the remote control for an extended period of time, it will automatically go into standby mode (Auto Power Down function). This function’s default setting is “Off.
SETUP Setting sound field program parameters CODE SET TRANSMIT SOURCE RECEIVER SLEEP Although the sound field programs would satisfy you as they are with the default parameters, you can arrange the effect by setting the sound field elements (parameters). To adjust the sound effects suitable for acoustical conditions of audio/video sources or rooms, perform the following operations.
SETUP Setting sound field program parameters ■ Parameters usable in certain sound field programs EFCT LVL 2ch Stereo only Adjusts the effect level of the compressed music enhancer mode. Direct Automatically bypasses the DSP circuit and tone control circuit depending on the condition of tone control etc., when an analog sound source is played back. You can enjoy a higher quality sound.
SETUP Controlling other components with the remote control CODE SET TRANSMIT SOURCE RECEIVER SLEEP c You can operate an external component such as TV and DVD player with the remote control of this unit by setting the code for external component (remote control code). The remote control code can be set for each input source. Individual setting allows you to switch external components seamlessly depending on the selected input source.
SETUP Controlling other components with the remote control CODE SET TRANSMIT SOURCE n RECEIVER SLEEP MI 1 2 1 2 3 4 3 4 d Registering remote control codes for external component operations AV AUDIO 5 V-AUX [ A ] 1 2 [ B ] [ C ] The following section describes how to register remote control code using an example of the registration of the remote control codes of a Yamaha BD player connected to HDMI2 jack. TUNER FM AM PRESET INFO TUNING MEMORY ENHANCER SUR.
SETUP Controlling other components with the remote control CODE SET TRANSMIT SOURCE n RECEIVER SLEEP Resetting all remote control codes HDMI 1 2 1 2 3 4 3 4 Resetting all remote control codes for external components to the initial factory settings.
SETUP Extended functionality that can be configured as needed (Advanced Setup menu) The Advanced Setup menu can be used for unit initialization and other useful extended functions. The Advanced Setup menu can be operated as follows. Displaying/Setting the Advanced Setup menu 3 Use PROGRAM to select the item to be set from the following items. In the Advanced Setup menu, you can set the following settings. 1 2 Set this unit to the standby mode.
SETUP Extended functionality that can be configured as needed (Advanced Setup menu) CODE SET TRANSMIT SOURCE n RECEIVER SLEEP HDMI 1 2 1 2 3 4 3 4 AV Avoiding crossing remote control signals when using multiple Yamaha receivers AUDIO 5 V-AUX [ A ] 1 2 [ B ] [ C ] ■ To change the remote control ID Changing FM/AM frequency steps (Asia and General models only) Perform each of the following steps within 1 minute.
APPENDIX Troubleshooting Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below, or if the instructions below do not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. General Problem The power will not turn on. Cause The protection circuitry operated three times consecutively.
APPENDIX Troubleshooting Problem No sound. No picture. Cause Remedy See page Incorrect input or output cable connections. Connect the cables properly. If the problem persists, the cables may be defective. 15 If a DVI-HDMI cable is used to connect the unit with an external component, then it is necessary to use an audio input jack for a different input to output audio. Display the HDMI Input Option menu for the connected cable, select “Audio In,” and select the jack to use for audio input.
APPENDIX Troubleshooting Problem No sound is heard from the surround speakers. No sound is heard from the subwoofer. Cause Remedy See page This unit is in straight decoding mode and a monaural source is being played back. Press gSTRAIGHT (on the remote control) to exit straight decoding mode. 27 Sound may not be output from certain channels depending on input sources or sound field programs. Try another sound field program. 26 A subwoofer is not connected, or it is disabled.
APPENDIX Troubleshooting Tuner (FM/AM) FM AM Problem FM stereo reception is noisy. Cause You are too far from the station transmitter, or the input from the antenna is weak. Remedy See page Check the antenna connections. 20 Switch to monaural mode. 31 Replace the outdoor antenna with a more sensitive multi-element antenna. — Adjust the antenna height or orientation, or place it in a different location. — There is distortion, and clear reception cannot be obtained even with a good FM antenna.
APPENDIX Troubleshooting Remote control Problem The remote control does not work or function properly. External components cannot be controlled using the remote control. Cause Remedy See page Wrong distance or angle. The remote control will function within a maximum range of 20 ft / 6 m, and no more than 30 degrees off-axis from the front panel. — Direct sunlight or lighting (from an inverter type of fluorescent lamp, strobe light, etc.) is striking the remote control sensor of this unit.
APPENDIX Glossary Audio information Audio and video synchronization (lip sync) Lip sync, an abbreviation for lip synchronization, is a technical term that involves both a problem, and the capability of maintaining audio and video signals synchronized during post-production and transmission. Whereas the audio and video latency requires complex end-user adjustment, HDMI version 1.
APPENDIX Glossary SILENT CINEMA HDMI Yamaha has developed a natural, realistic sound effect DSP algorithm for headphones. Parameters for headphones have been set for each sound field program, so that accurate representations of all the sound field programs can be enjoyed on headphones. HDMI (High-Definition Multimedia Interface) is the first industry supported, uncompressed, all-digital audio/video interface.
APPENDIX Information on HDMI™ ■ HDMI signal compatibility NOTES Audio signals Audio signal types Audio signal formats Compatible media 2ch Linear PCM 2ch, 32-192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio, etc. Multi-ch Linear PCM 8ch, 32-192 kHz, 16/20/24 bit DVD-Audio, Blu-ray Disc, HD DVD, etc. DSD 2/5.1ch, 2.8224 MHz, 1 bit SACD, etc. Bitstream Dolby Digital, DTS DVD-Video, etc.
APPENDIX Specifications ■ HDMI specification • Deep Color • x.v.
APPENDIX ■ FM SECTION ■ AM SECTION • Tuning Range [U.S.A. and Canada models] ...............................87.5 to 107.9 MHz [Asia and General models] ........... 87.5/87.50 to 108.0/108.00 MHz [Other models].................................................87.50 to 108.00 MHz • Tuning Range [U.S.A. and Canada models]...................................530 to 1710 kHz [Asia and General models]..................... 530/531 to 1710/1611 kHz [Other models] ....................................................
© 2010 Yamaha Corporation All rights reserved.