RLT DISC 1 DISC 2 DISC 3 DISC CHANGE VIDEO CD PROGRAM STANDBY STANDBY /ON DIGITAL VIDEO Version 2.0 / Playback Control 3–DISC VCD CHANGER OPEN/CLOSE B.
Unpacking Desembalaje ● After unpacking, check that the following parts are contained. ● Desembale el aparato y verifique que los siguientes accesorios están en la caja. ● DISC 1 DISC 2 DISC 3 OPEN/CLOSE DISC CHANGE ● Front speakers ● Main unit ● Aparato principal VIDEO CD 3–DISC VCD CHANGER PROGRAM STANDBY STANDBY /ON ● DIGITAL VIDEO Version 2.0 / Playback Control B.
Setting this system Instalación del sistema 20 cm DISC 1 DISC 2 DISC 3 DISC CHANGE VIDEO CD 3–DISC VCD CHANGER DIGITAL VIDEO Version 2.0 / Playback Control PROGRAM STANDBY STANDBY /ON 20 cm DISC 1 OPEN/CLOSE B.
Front panel Panel delantero Front panel O P DISC 1 DISC 2 Q R DISC 3 DISC CHANGE OPEN/CLOSE 6 1 VIDEO CD 3–DISC VCD CHANGER 4 M 3 PROGRAM STANDBY STANDBY /ON DIGITAL VIDEO Version 2.0 / Playback Control B.
Amplifier/tuner Amplificador/sintonizador 1 Display Visualizador 2 Remote control sensor Sensor del control remoto 9 MIC (1, 2) [p. 38] 0 BASS/TREBLE [p. 33] A MIC MIXING [p. 38] B Front cover Cubierta delantera 3 TIMER 4 STANDBY [p. 13] 5 B. BOOST [p. 33] 6 PROGRAM [p. 36] 7 KARAOKE [p. 38] 8 PHONES [p. 34] CD/Video CD player C / [p. 22, 24] D A/B/C/D/E [p. 24] E PRESET/TUNING/BAND [p. 22] F VOLUME [p. 33] G MUSIC [p. 34] R S Plato del disco [p. 13] P DISC (1, 2, 3) [p. 14] Q DISC CHANGE [p.
Remote control Control remoto 1 POWER POWER 8 1 0 2 3 1 4 2 5 3 6 4 7 5 8 6 9 7 0 8 TUNER +I0 PROG PRESET R.TIME B DISC SKIP C MODE PRESET TIME A EDIT D 2 A 0 3 H G R 1 2 3 1 4 2 5 3 6 4 7 5 8 6 9 7 0 8 TUNER +I0 PROG PRESET R.
Amplifier/tuner Amplificador/sintonizador 1 Transmission window 7 LEVEL (–/+) [p. 11, 37, 39] Ventanilla de transmisión LEVEL ( / 8 POWER [p. 11] 9 SLEEP [p. 41] 0 PRESET ( / ) [p. 24] A TUNER [p. 22] B PROGRAM [p. 36] C MUSIC [p. 34] D VOLUME [p. 33] E INPUT [p. 13, 22, 26, 32] [p. 5] 2 Numeric buttons Botones numéricos [p. 24] 3 A, B, C, D, E [p. 24] 4 KARAOKE [p. 38] 5 TEST [p. 11] 6 CENTER/REAR/DELAY [p. 37] TUNER → TAPE → VCD/CD ↑ ↓ AUX/MD ← VCR ← VIDEO KEY/ECHO [p.
English Thank you for purchasing this YAMAHA product. We hope it will give you many years of trouble-free enjoyment. For the best performance, read this manual carefully. It will guide you in operating your YAMAHA product. Contents Precautions ....................................... 1 Features ............................................ 4 Preparations and connections ........ 5 Installing batteries in the remote control ............. 5 Remote control operation range .........................
Precautions: Read this before operating your system ■ Choose the installation location of this system carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibration and excessive dust, heat, cold or moisture. Keep it away from sources of hum such as transformers and electric motors. ■ Do not operate this system upside-down. It may overheat, possibly causing damage. ■ Never open the cabinet. If something drops into the set, contact your dealer.
Precautions: Read this before operating your system This system is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this system itself is turned off. This state is called the standby mode. In this state, this system is designed to consume a certain amount of power. Note Please check the copyright laws in your country to record from records, compact discs, radio, etc. Recording of copyright materials may infringe copyright laws.
Precautions: Read this before operating your system English NOTES ABOUT DISCS The CD/Video CD player in this system can play discs of the following types only.
Features General • 5-Speaker Multi-Channel Audio System (Two Front, One Center and Two Paralleled Rear Speakers) • High Power Output Front L, R: 100W + 100W (6Ω) RMS, 10% THD, 1 kHz Center: 100W (6Ω) RMS Output Power, 10% THD, 1 kHz Rear: 30W (6Ω) RMS Output Power, 10% THD, 1 kHz • 4 External Audio/Video Component Connecting Capability • • Multi-Use Timer/Sleep Timer • • • • Remote Control Capability • • Sound Field Processing (HALL and YMERSION) • 3 Preset Graphic Equalizer Modes (ROCK, POPS a
Preparations and connections 1 Turn the remote control over and remove the battery compartment cover by sliding it in the direction of the mark. 2 Insert the batteries (AA, R6, UM-3 type) according to the 1 polarity markings on the inside of the battery compartment. 3 Attach the battery compartment cover. 3 Notes 2 • Be sure the polarities are correct. (see the illustration inside the battery compartment.) • Remove the batteries if the remote control is not used for an extended period of time.
Preparations and connections Setting up the speakers ■ 4 channel 5 speaker configuration Center Front L Front R This system employs a 5 speaker configuration: 2 front speakers, 2 rear paralleled speakers and a center speaker. The front speakers are used for outputting main source sound. The rear speakers are for effect and surround sounds when the sound PRO LOGIC or HALL is selected. The center field program speaker is for center sounds (dialogue etc.
Preparations and connections ■ Mounting the rear speakers 60 mm To mount the rear speakers by using commercially available speaker stands The provided mounting bracket has 1 pair of screw holes (at an interval of 60 mm). They are for mounting the speaker on a speaker stand. * These screw holes can be used with M4 screws only. Mounting bracket Note It is recommended that you connect the speaker cords to the speaker’s terminals before attaching the bracket to the speaker.
Preparations and connections Connections Never plug the AC supply lead of this system into the AC outlet until all connections are completed. Subwoofer system (not included in this system) Center speaker Rear speaker Rear speaker L R INPUT SPEAKERS TV MODE PAL AUTO NTSC SEE OWNER'S MANUAL FOR CONNECTION. REAR R SUBWOOFER Front speakers CENTER L REAR VIDEO SIGNAL OUT MONITOR OUT L R R L OUT VCR IN CENTER : 6 REAR : 12 MIN./SPEAKER MIN.
Preparations and connections ■ Antenna connection (1) Supplied FM antenna ANTENNA FM 75 GND AM Connect the FM antenna wire to the corresponding terminal and direct it to the direction where the strongest signal can be received. UNBAL. (2) Supplied AM loop antenna Connect the AM loop antenna wires to the corresponding terminals. Position the AM loop antenna for optimum reception.
Preparations and connections Setting the clock DISC 1 DISC 2 DISC 3 OPEN/CLOSE DISC CHANGE 1 While the power is on, press DISPLAY to display time. 2 While holding down TIME ADJ, press HOUR and set the hour. VIDEO CD PROGRAM STANDBY STANDBY /ON DIGITAL VIDEO Version 2.0 / Playback Control 3–DISC VCD CHANGER B.BOOST MUSIC TIMER 3 While holding down TIME ADJ, press MIN and set the minute. VOLUME PRESET/TUNING/BAND INPUT A/B/C/D/E * Press MIN once to advance the time by 1 minute.
Preparations and connections English Speaker balance adjustment You can adjust the sound output level balance between the front, center, and rear speakers using the built-in test tone generator. This is important for the best performance of the built-in Dolby Pro Logic surround decoder. You can adjust the sound output level of center and rear speakers from –21 to +10 and the balance of the sound output levels of the left and right front speakers from L–6 to R–6.
CD/Video CD player operation Display information Each indicator mentioned with a number on pages 13–20 corresponds to the indicator with the same number on this page. 2 1 3 TRACK 100 350 1K 3.5K 10K MUSIC TOTAL REM VCD PBC 45 1 TRACK (track number) 2 Time display 3 Disc indicator The number on the top of this indicator shows the currently selected disc.
CD/Video CD player operation 4 1 Turn on the power. * When you play a Video CD, you must also turn on the TV monitor connected to this system. 2 Press INPUT or (or INPUT on the remote control) until “VCD/CD” (2) appears on the display. STANDBY indicator DISC (1, 2, 3) DISC 1 DISC 2 4 DISC 3 DISC CHANGE VIDEO CD 3–DISC VCD CHANGER OPEN/CLOSE DIGITAL VIDEO Version 2.0 / Playback Control PROGRAM STANDBY STANDBY /ON 3, 5 B.
CD/Video CD player operation To finish using this system Turn this system into the standby mode by pressing STANDBY/ON (or POWER STANDBY indicator will light up and the display will go out. on the remote control). The Direct operation DISC (1, 2 or 3) on the front panel and / on the remote control will work if they are pressed when this system is in the standby mode or another input source is selected.
CD/Video CD player operation DISC CHANGE DISC 1 DISC 2 DISC 3 OPEN/CLOSE DISC CHANGE To advance to the next track During play, press ( advances to other tracks. ). Pressing ( ) repeatedly To return to the beginning of current track VIDEO CD DIGITAL VIDEO Version 2.0 / Playback Control During play, press PROGRAM B.BOOST ( ) once. MUSIC To return to previous track VOLUME PRESET/TUNING/BAND A/B/C/D/E / UP DOWN S During play, press previous track.
CD/Video CD player operation DISC 1 DISC 2 DISC 3 Program play OPEN/CLOSE DISC CHANGE You can program up to 20 tracks in any desired order. 1 When the CD/Video CD player is being stopped, press PROG to VIDEO CD DIGITAL VIDEO Version 2.0 / Playback Control PROGRAM B.BOOST MUSIC 5 2 If necessary, select the desired disc by pressing DISC SKIP.
CD/Video CD player operation OPEN/CLOSE All discs, a disc, a single track or a programmed sequence can be repeated continuously. VIDEO CD Press REPEAT once or more to select the desired repeat play mode so that the S REP or F REP indicator (B) is illuminated. DIGITAL VIDEO Version 2.0 / Playback Control (off) PROGRAM B.
CD/Video CD player operation Random play OPEN/CLOSE DISC CHANGE Tracks on a selected disc or all discs on the disc tray can be played randomly. VIDEO CD 1 If necessary, switch the disc play mode by pressing MODE. DIGITAL VIDEO Version 2.0 / Playback Control * If the single disc play mode is selected, select the desired disc by pressing DISC SKIP. PROGRAM B.BOOST MUSIC 2 Press RANDOM to begin random play. * The “RANDOM” indicator (8) will light up.
CD/Video CD player operation A EDIT PROG PRESET R.TIME B DISC SKIP C MODE D To find the desired scene quickly for Video CDs Press TIME INDEX or once or more to skip forward or backward by the displayed time. E RETURN VCD/CD / KARAOKE INTRO TIME INDEX By pressing a button repeatedly, the time on the display and TV monitor changes. SELECT DIGEST Notes TIME INDEX DIRECTION • While playing a disc, you can skip forward or backward through the entire disc. • While playing a Video CD (version 2.
CD/Video CD player operation Playback Control of Video CD (version 2.0) for Video CDs This function is available for Video CDs (version 2.0) only. “PBC” will light up on the display when a version 2.0 disc is used. The Playback Control differs from disc to disc. Refer to the instructions of the disc for details. ■ Basic operation Use the remote control when making Playback Control operations. Note Disc play in the Playback Control mode depends on the data contained in the disc used.
Tuning operation Each indicator mentioned with a number on pages 22–24 corresponds to the indicator with the same number on this page. 1 2 PRESET 100 350 1K 3.
Tuning operation Automatic tuning 5, 3 DISC 1 DISC 2 DISC 3 1 Turn on the power. 2 Press INPUT or until “TUNER” (2, 7) appears on the display, or simply press TUNER on the remote control.
Tuning operation DISC 1 DISC 2 DISC 3 VI 3–DISC VCD CHANGER 1 Versio 1 Turn on the power. STANDBY STANDBY /ON You can make use of an automatic preset tuning function. With this function, the built-in tuner performs automatic tuning. Up to 40 stations [8 stations x 5 groups (A, B, C, D and E)] are stored automatically. TIMER 2 Press INPUT PRESET/TUNING/BAND INPUT 2 or until “TUNER” (2, 7) appears on the display, or simply press TUNER on the remote control.
Tuning operation Manual preset tuning 6, 2 DISC 1 DISC 2 The built-in tuner can store station frequencies selected by tuning operation. With this function, you can select any desired station only by calling the corresponding preset station number. Up to 40 stations (8 stations x 5 groups) can be stored. DISC 3 3–DISC VCD CHANGER 1 ■ To store stations STANDBY STANDBY /ON TIMER 1 Turn on the power.
Playing back a tape Each indicator mentioned with a number on pages 26–31 corresponds to the indicator with the same number on this page. 1 100 350 1K 3.5K 10K MUSIC NR PROGRAM TAPE 2 1 Tape counter 2 NR (DOLBY NR) 3 Tape direction indicator 3 4 5 TAPE EDIT A B REC 6 7 4 Reverse mode indicator 5 TAPE (input source indicator) 8 VOLUME 9 7 (play) 8 EDIT 9 Tape side indicator 6 TAPE REC General information • Do not use C-120 tapes or poor quality tapes, since they can cause malfunctions.
Playing back a tape VIDEO CD 3–DISC VCD CHANGER 1 PROGRAM STANDBY STANDBY /ON 2 Basic operation DIGITAL VIDEO Version 2.0 / Playback Control B.BOOST MUSIC 1 Turn on the power. TIMER VOLUME PRESET/TUNING/BAND INPUT 2 Press INPUT A/B/C/D/E / UP or until “TAPE” (1, 5) appears on the DOWN display. 5 BASS TREBLE PHONES MODE DOLBY NR REC/ PAUSE (stop) 5 6 3, 4 AUTO/ MANUAL MEMORY RANDOM REPEAT TIMER TIME ADJ HOUR MIN TIME 3 Open the tray by pressing DISPLAY OPEN/CLOSE.
Playing back a tape DISC 2 DISC 3 DISC CHANGE VIDEO CD 3–DISC VCD CHANGER PROGRAM B.BOOST Winding the tape 1 Press DIGITAL VIDEO Version 2.0 / Playback Control STANDBY STANDBY /ON OPEN/CLOSE or English DISC 1 to wind the tape. MUSIC TIMER VOLUME PRESET/TUNING/BAND INPUT A/B/C/D/E Moves rapidly in the current tape running direction while winding.
Recording Notes DISC 1 DISC 2 DISC 3 • Adjusting the VOLUME, BASS and TREBLE controls, and the use of B. BOOST, MUSIC and YMERSION have no effect on the recorded sound. The recording level is automatically adjusted. • A sound field program except for YMERSION may have effect on the recorded sound. If a sound field program is selected, cancel it before you begin recording. Refer to page 36 on how to cancel the sound field program.
Recording To stop recording temporarily DISC 1 DISC 2 DISC 3 VIDEO CD 3–DISC VCD CHANGER PROGRAM B.BOOST Press REC/PAUSE. * Press on the tape deck to resume recording. To stop recording DIGITAL VIDEO Version 2.0 / Playback Control STANDBY STANDBY /ON OPEN/CLOSE DISC CHANGE English / MUSIC Press TIMER on the tape deck.
Recording DISC 1 DISC 2 Recording from CDs utilizing the EDIT function DISC 3 The EDIT function performs recording on both sides of the tape. 3–DISC VCD CHANGER STANDBY STANDBY /ON For Video CDs Video CDs cannot be recorded with the EDIT function.
Recording ■ Manual EDIT recording B.BOOST MUSIC TIMER You can program tracks manually while watching the remaining time on both sides of the tape. VOLUME PRESET/TUNING/BAND INPUT A/B/C/D/E / UP DOWN 1 Press INPUT BASS or repeatedly until “VCD/CD” (1) appears on the display, and load a disc (or discs) on the disc tray. TREBLE PHONES MODE DOLBY NR REC/ PAUSE AUTO/ MANUAL MEMORY RANDOM REPEAT TIMER TIME ADJ HOUR MIN TIME DISPLAY 2 Follow steps 3–5 on page 30. 3 Press PROG.
Operating an external unit connected to this system DISC 1 DISC 2 DISC 3 DISC CHANGE VIDEO CD 3–DISC VCD CHANGER DIGITAL VIDEO Version 2.0 / Playback Control PROGRAM STANDBY STANDBY /ON OPEN/CLOSE B.BOOST MUSIC TIMER VOLUME PRESET/TUNING/BAND INPUT UP play by using INPUT control).
Various sound control 1 2 3 English BASS BOOST 100 350 1K 3.5K 10K MUSIC ROCK POPS JAZZ CD PROGRAM PRO LOGIC HALL 3 STEREO YMERSION 4 VOLUME 5 1 Spectrum analyzer 3 VOLUME (volume level meter) 4 MUSIC (preset equalizer mode indicator) 5 PROGRAM (sound field program The spectrum of the input source which is divided into five bands will be indicated in real time. indicator) 2 BASS BOOST B.BOOST VIDEO CD 3–DISC VCD CHANGER ■ VOLUME control DIGITAL VIDEO Version 2.
Various sound control ■ Listening with headphones PHONES DISC 1 DISC 2 DISC 3 DISC CHANGE OPEN/CLOSE • Be sure that your headphones have a 3.5 mm (1/8”) diameter plug and between 16 ohms and 50 ohms impedance. Recommended impedance is 32 ohms. • When you listen with headphones, connect the headphones to the PHONES jack. You can listen to the sound that is normally outputted from the front speakers through headphones. Adjust VOLUME to a comfortable listening level.
Various sound control The Sound Field Processor built into this system enables you to enjoy listening to a source with an ambience of actual concert hall or three-dimensional acoustics. This system provides preset sound field programs shown below. You can enjoy an excellent sound field by selecting any one of them and by adding any other desired adjustments. This system also incorporates a Dolby Pro Logic Surround decoder for multi-channel sound reproduction of Dolby Surround encoded video sources.
Various sound control OPEN/CLOSE DISC CHANGE ■ Listening to the music with a sound field effect 1 Play a source. 2 Press PROGRAM repeatedly until the name of the desired VIDEO CD DIGITAL VIDEO Version 2.0 / Playback Control PROGRAM B.BOOST MUSIC program lights up on the sound field program indicator (5). * Whenever you press PROGRAM, the program changes and is displayed as follows.
Various sound control POWER 1 2 3 CENTER LEVEL 1 4 2 5 3 6 Control range : +10 to –21 4 7 5 8 6 9 7 0 8 TUNER +I0 PROG PRESET R.TIME B DISC SKIP C MODE PRESET TIME A EDIT D 1 Press CENTER/REAR/DELAY repeatedly until “CENTER” appears on the display. 2 By pressing LEVEL + or – continuously, the level value also changes continuously. E Changes.
Karaoke operation ■ Singing karaoke 2 This system allows you to enjoy singing karaoke by using not only a source exclusively for karaoke use but also any normal audio source. KARAOKE MIC MIXING 1 MIC 2 5 OPEN/CLOSE MIN 1 Connect one or two microphones to the MIC jack(s) on the front panel of the main unit. MAX 2 Select a karaoke mode (L R, L, R or VOCAL CUT) by pressing KARAOKE repeatedly until the corresponding name appears on the karaoke mode indicator.
Karaoke operation ■ Adjusting the level of ECHO effect 1 2 3 1 4 2 5 3 6 4 7 5 8 6 9 7 0 8 TUNER +I0 PROG PRESET R.TIME B DISC SKIP C MODE PRESET TIME A EDIT English You can adjust the level of echo effect applied to the sound inputted from the microphone(s). This adjustment can be made only in the karaoke mode. POWER D Control range: Min, 1 to 6, Max 1 Press KEY/ECHO repeatedly until “ECHO” appears on the display. 2 Press LEVEL + to increase or – to decrease the echo level.
Using the built-in timer STANDBY/ON DISC 1 DISC 2 DISC 3 DISC CHANGE VIDEO CD 3–DISC VCD CHANGER OPEN/CLOSE DIGITAL VIDEO Version 2.0 / Playback Control PROGRAM STANDBY STANDBY /ON Timer play INPUT B.
Using the built-in timer DISC 1 DISC 2 DISC 3 DISC CHANGE STANDBY /ON 1 Follow steps 2–3 of “Basic recording” on page 28. DIGITAL VIDEO Version 2.0 / Playback Control PROGRAM STANDBY B.
Appendix Troubleshooting Refer to the chart below when this system does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, disconnect the supply lead and contact your authorized YAMAHA dealer or service center. Problem Cause What to Do This system does not work normally. There is an influence of strong external noise (lightning, excessive static electricity, etc.) or the system was operated incorrectly.
Appendix Cause The disc is not a standard type. Play another disc. Play will not begin even if disc is loaded. Disc is upside down. Load disc with label side facing upward. Disc is dirty. Clean disc. No sound or no picture. The input source selection is incorrect. Select the CD/Video CD player by pressing INPUT or button until “VCD/CD” lights up on the display. Sound stops suddenly (always at the same spot). Disc is dirty. Clean disc. Volume is set too high. Lower volume.
Appendix Specifications ■ Amplifier section ■ Tape deck section Minimum RMS Output Power per Channel FRONT 6 ohm, 1 kHz, 0.9% THD ........................... 80W+80W 6 ohm, 1 kHz, 10% THD ........................ 100W+100W CENTER 6 ohm, 1 kHz, 0.9% THD ...................................... 80W 6 ohm, 1 kHz, 10% THD ..................................... 100W REAR 6 ohm, 1 kHz, 0.9% THD ...................................... 25W 6 ohm, 1 kHz, 10% THD ....................................... 30W Type .....
YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.