User Manual

ManualsBrandsYamaha ManualsAccessoriesGroove-Wedge RMGW

Thank you for purchasing the Yamaha ELECTRONIC DRUM KIT DTX8K-X or DTX8K-M. This electronic drum kit can be used in your home or a studio, or onstage for live perfor-

mances. For proper assembly and safe use, read this assembly manual carefully before using it. After you have read the manual, keep it in a safe and handy place for future reference.

This manual describes the standard assembly procedure for the DTX8K-X/DTX8K-M electronic drum kits. It covers assembly, wiring and setting up the drum trigger module of the kit.

The illustrations show the DTX8K-X electronic drum kit, but the information applies to the DTX8K-M (except where indicated).

ELECTRONIC DRUM KIT

DTX8K-X DTX8K-M Assembly Manual

This manual describes the process of assembling a pad set and drum

trigger module to an already assembled RS8 Electronic Drum Rack.

Before starting the steps below, therefore, be sure to assemble your RS8

as described in the Owner’s Manual that came with it.

Lay a drum mat (sold separately) on the floor underneath the hi-hat

stand and the kick pad. Alternatively, you can place cardboard from the

drum kit packaging or the like on the floor to prevent it from being

scratched.

IMPORTANT

NOTICE

Example of standard assembly

Cymbal pad

Tom pads

Kick pad

Snare pad

Hi-hat stand

DTX-PRO

Drum trigger

module

Real hi-hat pad

Cymbal pad

Tom pad

Cymbal pad

Electronic drum rack

Snare stand

The purpose of the precautions detailed below is to ensure that this electronic drum kit can be used safely without fear of injury or property damage. Precautions are extremely important in terms of ensuring

safety, and therefore, they should be fully observed.

* After reading this Assembly Manual, ensure that it is kept in a safe, convenient location for future reference.

* Be sure to also read the Assembly Manuals and/or Owner’s Manuals that came with your pads and rack.

* The illustrations as shown in this manual are for instructional purposes only, and may appear somewhat dif-

ferent from those on your product.

* The company names and product names in this manual are the trademarks or registered trademarks of their

respective companies.

* The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest

manual, access the Yamaha website then download the manual file. Since specifications, equipment or sep-

arately sold accessories may not be the same in every locale, please check with your Yamaha dealer.

NOTICE: Usage Precautions

• When connecting and disconnecting cables, be sure to hold the plug and not the cable itself. In addition,

avoid placing heavy items on top of cables and do not allow them to touch sharp edges. Failure to avoid

these precautions can lead to cable breakage and disconnection.

• Do not climb onto the electronic drum kit and avoid placing heavy objects on it. Failure to observe this pre-

caution can result in malfunction.

• Do not use or keep the product in places with extremely high temperature (places in direct sunlight, close to

a heater, in a closed car, etc.) or high humidity (bathroom, outside on a rainy day, etc.). Doing so can result

in deformation, discoloration, damage or deterioration.

• When cleaning the product, use a soft and dry/slightly damp cloth. Do not use paint thinners, solvents, alco-

hol, cleaning fluids, or chemical-impregnated wiping cloths.

PRECAUTIONS Please read carefully before proceeding

Failure to observe the precautions described below can result in

injury and/or property damage.

• Assemble this product in the proper sequence by following the assembly instructions in this man-

ual. Also, make sure to tighten the bolts regularly. Failure to do so might result in damage to the

product or even injury.

• Do not let small children assemble or set up this product by themselves, or they can be injured.

Always assemble this product with adult supervision.

• Be careful with the edges of the cymbal holders and the tom holders. The sharp holder ends can

result in injury.

• The anti-slip stoppers on kick pads and on foot pedals have sharp tips. In order to avoid injury,

therefore, you should take special care whenever handling these components.

• Be sure to securely tighten bolts and other fasteners when setting up this product. In addition, be

sure to proceed slowly when loosening bolts. If this precaution is not observed, pads can fall off or

the rack can collapse or fall over, possibly causing injury.

• Do not place the product in an unstable position where it might accidentally fall over.

• Whenever setting up this electronic drum kit, ensure that cables and the like are arranged safely. If

someone were to trip on a cable, the kit could topple over and cause injury.

• Do not alter the product. Doing so can result in injury or damage/deterioration to the product.

• Do not sit or step on the rack. The rack can overturn or be damaged, resulting in injury.

CAUTION

Failure to observe the precautions described below can result in

injury and/or property damage.

• Be careful with your fingers and hands when adjusting clamps, to prevent them from becoming

pinched and injured.

• Be careful around pipe ends and inside. Metal shavings, etc. can injure your fingers and hands.

• Do not place hands or feet under a hi-hat stand, kick pad or foot pedal. Doing so could result in

injury.

• Do not attach acoustic drums to the electronic drum rack. Clamps can be damaged and drums can

drop, causing injury.

• Keep small parts out of the reach of infants. Your children may accidentally swallow them.

• Do not go near the product during an earthquake. Strong shaking during an earthquake could

cause the product to move or tip over, resulting in damage to the product or its parts, and possibly

causing injury.

• When transporting or moving the product, always use two or more people. Attempting to lift the

product by yourself may damage your back, result in other injury, or cause damage to the product

itself.

CAUTION

Manual Development Group

Published 08/2020

POMA*.*- **A0

VDR6980

Open the boxes to reveal their contents.

After opening up the packages containing your electronic drum kit, verify that all of the following components are present.

Assemble the RS8 Electronic Drum Rack.

For instructions on how to assemble the RS8 Electronic Drum Rack, refer to the Owner’s Manual that came with it.

Assemble the pads and the drum trigger module to the electronic drum rack.

Components of both DTX8K-X and DTX8K-M

 PCY135 Cymbal Pad

(×2)

 PCY155 Cymbal Pad

(×1)

 RHH135 Real

Hi-hat Pad (×1)

 Stand base for

RHH135 (×1)

 RS8 Electronic Drum Rack (×1)

 RS8 Owner’s Manual (×1)

 HS650A Hi-hat

Stand (×1)

 KP90 Kick Pad (×1)

 Ten-channel snake cable (×1)

 Stopper for Cymbal Pad

(×3)

 Cable band (×9)

 Cable band for RHH135

(×1)

 DTX8K-X DTX8K-M Assembly Manual

(this leaflet; ×1)

 PCY100 PCY135 PCY155 PCY175

Owner’s Manual (×1)

 RHH135 Owner’s Manual (×1)

 KP90 Owner’s Manual (×1)

 DTX-PRO Drum Trigger Module (×1)

 AC adaptor (×1)

* May not be included depending on your

particular area. Check with your Yamaha dealer.

 DTX-PRO Owner’s Manual (×1)

 Cubase AI Download information (×1)

 Module holder (×1)  Module holder

screw (×4)

 XP125SD-X

Snare Pad (×1)

 Hi-hat clutch for

RHH135 (×1)

 Drum key (×1)

 Anti-slip stopper for

KP90 (incl. spring) (×2)

DTX8K-X only DTX8K-M only

 XP125SD-M

Snare Pad (×1)

 XP105T-M

Tom Pad (×3)

 SS662 Snare Stand

(×1)

 CH755 Cymbal

Holder (×3)

 Tom Holder (×3)  XP105T-X

Tom Pad (×3)

 XP105T-X XP105T-M

XP125T-X XP125T-M

XP125SD-X XP125SD-M

Owner’s Manual (×1)

1. Assemble the cymbal holders (CH755 × 3) on the electronic

drum rack as shown below, and then tighten the clamp bolt

to secure the holder in place.

NOTE

You can change the position of a position clamp to mark the

settings for future setups and to prevent unintentional changes

during musical performances. Make sure to secure the position

clamp using the drum key after moving the clamp.

CH755 CH755

CH755

Clamp bolt

Position clamp

Assembling the cymbal holders

1. Assemble the tom holders (×3) on the electronic drum rack as

shown above, and then tighten the clamp bolt to secure the

holder in place.

2. Push the tom pads onto the tom holder’s rods. Leave a gap

of about a half inch between the base of the tom holder and

the tom pad, and then tighten the wing bolt to secure the pad

in place.

3. Loosen wing bolts A to B and clamp bolts C to E as shown

below to adjust the height and angle of any of the pads. When

correctly positioned, be sure to securely retighten the bolts

before proceeding to the next step.

Before every playing, tighten the drum key bolts so that there is no

rattling and loosening of the head, in order to prevent malfunction.

Refer to the “Head tension adjustment” in the XP105T-X XP105T-

M XP125T-X XP125T-M XP125SD-X XP125SD-M Owner’s Manual.

XP105T

Tom holders

Tom holder

Clamp bolt

Tom holder

Wing boltTom pad

Insert

Rod section Leave a gap

Clamp bolt C

Wing bolt A

Wing bolt B

Clamp bolt D

Clamp bolt E

NOTICE

Assembling the tom pads

Continued on other side

Summary of content (2 pages)

PAGE 1
ELECTRONIC DRUM KIT DTX8K-X DTX8K-M Assembly Manual EN 1 Manual Development Group © 2020 Yamaha Corporation Published 08/2020 POMA*.*- **A0 VDR6980 Open the boxes to reveal their contents. After opening up the packages containing your electronic drum kit, verify that all of the following components are present. Components of both DTX8K-X and DTX8K-M  PCY135 Cymbal Pad (×2) Thank you for purchasing the Yamaha ELECTRONIC DRUM KIT DTX8K-X or DTX8K-M.
PAGE 2
4 Assembling the hi-hat stand 1. If a drum mat (sold separately) is not available, lay a sheet of cardboard on the floor to prevent it from being scratched. 5. Loosen the hi-hat clutch’s wing bolt b and remove the hi-hat clutch. 2. Loosen the hi-hat stand’s wing bolt a. 3. Open up the three legs as shown below and then retighten 4. Insert the footboard stabilizer rods into the frame holes as shown below. 6. Remove the hi-hat shaft 7.