FLX™ UC 1500 IP & USB Conference Phone, Extended Quick Start Guide Conference with Confidence
Connecting your UC 1500 1. Take the UC 1500 Base Unit, Dialer, and extension microphones Contents out of the box. • 1 Base Unit 2. Connect the Dialer to the Base Unit, making sure to connect the • 1 Dialer Unit cable in the dialer port on the bottom of the UC 1500. • 1 USB Cable, 6.56ft (2.0m) 3. Connect the extension microphones to the two available extension • 1 Ethernet Cable, 25ft(7.62m) microphone ports on the bottom of the UC 1500. • 2 Extension Microphones 4.
2. Via Web Interface: a. Press the Menu Button on the Dialer b. Navigate to and Select the Info Option c. Note the IP Address of the UC 1500 d. Using a computer on the network, open an internet browser and type in the IP address e. For initial login, the password is 7386. f. Navigate to Settings - SIP g. Configure the items in this menu per your call manager configuration h. Click the Save button. No reboot of the system is required.
Connecting the UC 1500 via USB: 1. Use the USB cable to connect the UC 1500 to the computer using to the connector on the bottom of the UC 1500. 2. For call control functionality of supported 3rd party applications on your computer, download and install the FLX Device Manager from: https://uc.yamaha.com/resources/support/ Safety Warnings: • Do not expose any of the UC 1500 components to water, moisture, or high humidity. • Do not expose any of the UC 1500 components to extreme high or low temperatures.