OWNER’S MANUAL FJR1300N YAMAHA MOTOR CO., LTD. PRINTED ON RECYCLED PAPER PRINTED IN JAPAN 2001 · 3 - 0.
H_5KS_Toc0.
E_5jw.book Page 1 Friday, March 30, 2001 2:14 PM EAU00000 INTRODUCTION 1- Congratulations on your purchase of the Yamaha FJR1300. This model is the result of Yamaha’s vast experience in the production of fine sporting, touring, and pacesetting racing machines. It represents the high degree of craftsmanship and reliability that have made Yamaha a leader in these fields. This manual will give you an understanding of the operation, inspection, and basic maintenance of this motorcycle.
E_5jw.book Page 1 Friday, March 30, 2001 2:14 PM IMPORTANT MANUAL INFORMATION Particularly important information is distinguished in this manual by the following notations: The Safety Alert Symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! Failure to follow WARNING instructions could result in severe injury or death to the motorcycle operator, a bystander, or a person inspecting or repairing the motorcycle.
E_5jw.book Page 2 Friday, March 30, 2001 2:14 PM IMPORTANT MANUAL INFORMATION EW000002 WARNING PLEASE READ THIS MANUAL CAREFULLY AND COMPLETELY BEFORE OPERATING THIS MOTORCYCLE.
E_5jw.book Page 3 Friday, March 30, 2001 2:14 PM IMPORTANT MANUAL INFORMATION EAU03337 FJR1300N OWNER’S MANUAL © 2001 by Yamaha Motor Co., Ltd. 1st Edition, March 2001 All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha Motor Co., Ltd. is expressly prohibited. Printed in Japan.
E_5jw.
E_5jw.
E_5jw.book Page 1 Friday, March 30, 2001 2:14 PM SAFETY INFORMATION Safe riding .......................................................................................... 1-1 Protective apparel .............................................................................. 1-3 Modifications ...................................................................................... 1-3 Loading and accessories ................................................................... 1-3 Gasoline and exhaust gas.........
E_5jw.book Page 1 Friday, March 30, 2001 2:14 PM SAFETY INFORMATION EAU00014* 1- 1 MOTORCYCLES ARE SINGLE TRACK VEHICLES. THEIR SAFE USE AND OPERATION ARE DEPENDENT UPON THE USE OF PROPER RIDING TECHNIQUES AS WELL AS THE EXPERTISE OF THE OPERATOR. EVERY OPERATOR SHOULD KNOW THE FOLLOWING REQUIREMENTS BEFORE RIDING THIS MOTORCYCLE. HE OR SHE SHOULD: 1. OBTAIN THOROUGH INSTRUCTIONS FROM A COMPETENT SOURCE ON ALL ASPECTS OF MOTORCYCLE OPERATION. 2.
E_5jw.book Page 2 Friday, March 30, 2001 2:14 PM SAFETY INFORMATION 4. Many accidents involve inexperienced operators. In fact, many operators who have been involved in accidents do not even have a current motorcycle license. a. Make sure that you are qualified and that you only lend your motorcycle to other qualified operators. b. Know your skills and limits. Staying within your limits may help you to avoid an accident. c.
E_5jw.book Page 3 Friday, March 30, 2001 2:14 PM SAFETY INFORMATION Protective apparel 1 The majority of fatalities from motorcycle accidents are the result of head injuries. The use of a safety helmet is the single most critical factor in the prevention or reduction of head injuries. 1. Always wear an approved helmet. 2. Wear a face shield or goggles. Wind in your unprotected eyes could contribute to an impairment of vision that could delay seeing a hazard. 3.
E_5jw.book Page 4 Friday, March 30, 2001 2:14 PM SAFETY INFORMATION Loading The total weight of the operator, passenger, accessories and cargo must not exceed the maximum load limit of 208 kg. When loading within this weight limit, keep the following in mind: 1. Cargo and accessory weight should be kept as low and close to the motorcycle as possible. Make sure to distribute the weight as evenly as possible on both sides of the motorcycle to minimize imbalance or instability. 2.
E_5jw.book Page 5 Friday, March 30, 2001 2:14 PM SAFETY INFORMATION 1 a. Accessories fitted to the handlebar or the front fork area can create instability due to improper weight distribution or aerodynamic changes. If accessories are added to the handlebar or front fork area, they must be as lightweight as possible and should be kept to a minimum. b. Bulky or large accessories may seriously affect the stability of the motorcycle due to aerodynamic effects.
E_5jw.book Page 6 Friday, March 30, 2001 2:14 PM SAFETY INFORMATION 3. Always turn the engine off before leaving the motorcycle unattended and remove the key from the main switch. When parking the motorcycle, note the following: a. The engine and exhaust system may be hot, therefore, park the motorcycle in a place where pedestrians or children are not likely to touch these hot areas. b. Do not park the motorcycle on a slope or soft ground, otherwise it may fall over. c.
E_5jw.book Page 7 Friday, March 30, 2001 2:14 PM SAFETY INFORMATION EAU02977 Location of important labels Please read the following important labels carefully before operating this motorcycle. 1 1 WARNING Before you operate this vehicle, read the owner’s manual.
E_5jw.book Page 1 Friday, March 30, 2001 2:14 PM DESCRIPTION Left view ............................................................................................. 2-1 Right view........................................................................................... 2-2 Controls and instruments ...................................................................
E_5jw.book Page 1 Friday, March 30, 2001 2:14 PM DESCRIPTION EAU00026 2- Left view 2 1. Fuse box 2. Front fork spring preload adjusting bolt 3. Front fork rebound damping force adjusting knob 4. Engine oil filler cap 5. Owner’s tool kit 6. Rider seat 7. Passenger seat 8. Rear carrier 9. Final gear oil filler bolt 10. Final gear oil drain bolt 11. Shock absorber assembly rebound damping force adjusting knob 12. Shock absorber assembly spring preload adjusting lever 13. Air filter element 14.
E_5jw.book Page 2 Friday, March 30, 2001 2:14 PM DESCRIPTION Right view 2 17. Passenger footrest 18. Coolant reservoir 19. Battery 20. Windshield 21. Main fuse and fuel injection system fuse 22. Front fork compression damping force adjusting screw 23. Brake pedal 24.
E_5jw.book Page 3 Friday, March 30, 2001 2:14 PM DESCRIPTION Controls and instruments 2 1. Clutch lever 2. Left handlebar switches 3. Tachometer 4. Speedometer 5. Multi-function display 6. Right handlebar switches 7. Brake lever 8. Throttle grip 9.
E_5jw.book Page 1 Friday, March 30, 2001 2:14 PM INSTRUMENT AND CONTROL FUNCTIONS Main switch/steering lock .................................................................. 3-1 Indicator and warning lights ............................................................. 3-2 Speedometer ..................................................................................... 3-3 Tachometer ....................................................................................... 3-3 Multi-function display .........
E_5jw.book Page 1 Friday, March 30, 2001 2:14 PM INSTRUMENT AND CONTROL FUNCTIONS EAU00027 3- 3 EAU00029 Main switch/steering lock The main switch/steering lock controls the ignition and lighting systems, and is used to lock the steering. The various positions are described below. EAU00030 ON All electrical systems are supplied with power, and the headlight, meter lighting and taillight come on, and the engine can be started. The key cannot be removed. EAU00038 OFF All electrical systems are off.
E_5jw.book Page 2 Friday, March 30, 2001 2:14 PM INSTRUMENT AND CONTROL FUNCTIONS EAU00063 EAU03192 High beam indicator light “ ” This indicator light comes on when the high beam of the headlight is switched on. Engine trouble warning light “ ” This warning light comes on or flashes when an electrical circuit monitoring the engine is defective. When this occurs, have the Yamaha dealer check the self-diagnosis system.
E_5jw.book Page 3 Friday, March 30, 2001 2:14 PM INSTRUMENT AND CONTROL FUNCTIONS 3 1. Tachometer 2. Speedometer 3. Multi-function display 1. Tachometer 2. Tachometer red zone EAU00101 EAU04031 Speedometer The speedometer shows the riding speed. Tachometer 1. Multi-function display 2. “SELECT” button 3. “RESET” button EAU04095 The electric tachometer allows the rider to monitor the engine speed and keep it within the ideal power range.
E_5jw.
E_5jw.book Page 5 Friday, March 30, 2001 2:14 PM INSTRUMENT AND CONTROL FUNCTIONS EAU04077 Windshield position adjusting switch “ ” To move the windshield up, push this switch in direction a. To move the windshield down, push the switch in direction b. 3 NOTE: When the engine is turned off, the windshield will automatically return to the lowest position. _ 1. 2. 3. 4. 5.
E_5jw.book Page 6 Friday, March 30, 2001 2:14 PM INSTRUMENT AND CONTROL FUNCTIONS EAU00153 Clutch lever The clutch lever is located at the left handlebar grip. To disengage the clutch, pull the lever toward the handlebar grip. To engage the clutch, release the lever. The lever should be pulled rapidly and released slowly for smooth clutch operation. 3 1. 2. 3. a.
E_5jw.book Page 7 Friday, March 30, 2001 2:14 PM INSTRUMENT AND CONTROL FUNCTIONS EAU00161 Brake lever The brake lever is located at the right handlebar grip. To apply the front brake, pull the lever toward the handlebar grip. 3 1. 2. 3. a. Brake lever position adjusting dial Arrow mark Brake lever Distance between brake lever and handlebar grip The brake lever is equipped with a position adjusting dial.
E_5jw.book Page 8 Friday, March 30, 2001 2:14 PM INSTRUMENT AND CONTROL FUNCTIONS NOTE: The fuel tank cap cannot be closed unless the key is in the lock. In addition, the key cannot be removed if the cap is not properly closed and locked. _ _ EWA00025 WARNING Make sure that the fuel tank cap is properly closed before riding. _ 1. Fuel tank cap lock cover 2. Unlock.
E_5jw.book Page 9 Friday, March 30, 2001 2:14 PM INSTRUMENT AND CONTROL FUNCTIONS EAU01084 EAU00185 CAUTION: Immediately wipe off spilled fuel with a clean, dry, soft cloth, since fuel may deteriorate painted surfaces or plastic parts. _ _ EAU00192* 3 1. Fuel tank filler tube 2. Fuel level EAU03753 Fuel Make sure that there is sufficient fuel in the tank. Fill the fuel tank to the bottom of the filler tube as shown.
E_5jw.book Page 10 Friday, March 30, 2001 2:14 PM INSTRUMENT AND CONTROL FUNCTIONS 3 1. Rider seat lock 2. Unlock. EAU03945 Seats Rider seat To remove the rider seat 1. Insert the key into the seat lock, and then turn it as shown. 2. Pull the rider seat off. 1. Projection 2. Seat holder 1. Receptacle 2. Seat holder To install the rider seat 1. Insert the projection on the front of the rider seat into the seat holder as shown, and then push the rear of the seat down to lock it in place. 2.
E_5jw.book Page 11 Friday, March 30, 2001 2:14 PM INSTRUMENT AND CONTROL FUNCTIONS EAU03949* Adjusting the front fork This front fork is equipped with spring preload adjusting bolts, rebound damping force adjusting knobs and compression damping force adjusting screws. EW000035 3 WARNING Always adjust both fork legs equally, otherwise poor handling and loss of stability may result.
E_5jw.book Page 12 Friday, March 30, 2001 2:14 PM INSTRUMENT AND CONTROL FUNCTIONS Rebound damping force To increase the rebound damping force and thereby harden the rebound damping, turn the adjusting knob on each fork leg in direction a. To decrease the rebound damping force and thereby soften the rebound damping, turn the adjusting knob on each fork leg in direction b. 1. Current setting 2.
E_5jw.book Page 13 Friday, March 30, 2001 2:14 PM INSTRUMENT AND CONTROL FUNCTIONS EC000015 CAUTION: Never attempt to turn an adjusting mechanism beyond the maximum or minimum settings. _ _ NOTE: Although the total number of clicks of a damping force adjusting mechanism may not exactly match the above specifications due to small differences in production, the actual number of clicks always represents the entire adjusting range.
E_5jw.book Page 14 Friday, March 30, 2001 2:14 PM INSTRUMENT AND CONTROL FUNCTIONS EAU00315 WARNING This shock absorber contains highly pressurized nitrogen gas. For proper handling, read and understand the following information before handling the shock absorber. The manufacturer cannot be held responsible for property damage or personal injury that may result from improper handling. ● Do not tamper with or attempt to open the gas cylinder.
E_5jw.book Page 15 Friday, March 30, 2001 2:14 PM INSTRUMENT AND CONTROL FUNCTIONS EAU04075 Matching the front and rear suspension settings Use this table as a guide to match the suspension and damping adjustments of the front fork and shock absorber assembly according to various load conditions.
E_5jw.book Page 16 Friday, March 30, 2001 2:14 PM INSTRUMENT AND CONTROL FUNCTIONS EAU00330 Sidestand The sidestand is located on the left side of the frame. Raise the sidestand or lower it with your foot while holding the motorcycle upright. NOTE: The built-in sidestand switch is part of the ignition circuit cut-off system, which cuts the ignition in certain situations. (See further down for an explanation of the ignition circuit cut-off system.) _ 1.
E_5jw.book Page 17 Friday, March 30, 2001 2:14 PM INSTRUMENT AND CONTROL FUNCTIONS EAU03741 EW000046 Ignition circuit cut-off system 3 The ignition circuit cut-off system (comprising the sidestand switch, clutch switch and neutral switch) has the following functions. ● It prevents starting when the transmission is in gear and the sidestand is up, but the clutch lever is not pulled. ● It prevents starting when the transmission is in gear and the clutch lever is pulled, but the sidestand is still down.
E_5jw.book Page 18 Friday, March 30, 2001 2:14 PM INSTRUMENT AND CONTROL FUNCTIONS CD-01E With the engine turned off: 1. Move the sidestand down. 2. Make sure that the engine stop switch is set to “ 3. Turn the key to “ON”. 4. Shift the transmission into the neutral position. 5. Push the start switch. Does the engine start? YES NOTE: This check is most reliable if performed with a warmed-up engine. ”. NO The neutral switch may be defective.
E_5jw.
E_5jw.book Page 1 Friday, March 30, 2001 2:14 PM PRE-OPERATION CHECKS Pre-operation check list .....................................................................
E_5jw.book Page 1 Friday, March 30, 2001 2:14 PM PRE-OPERATION CHECKS EAU01114 4- The condition of a vehicle is the owner’s responsibility. Vital components can start to deteriorate quickly and unexpectedly, even if the vehicle remains unused (for example, as a result of exposure to the elements). Any damage, fluid leakage or loss of tire air pressure could have serious consequences.
E_5jw.book Page 2 Friday, March 30, 2001 2:14 PM PRE-OPERATION CHECKS ITEM CHECKS PAGE Clutch • • • • • Check operation. If soft or spongy, have Yamaha dealer bleed hydraulic system. Check fluid level in reservoir. If necessary, add recommended brake fluid to specified level. Check hydraulic system for leakage. 6-20, 6-25 Throttle grip • • • • Make sure that operation is smooth. Lubricate throttle grip, housing and cables if necessary. Check free play.
E_5jw.book Page 3 Friday, March 30, 2001 2:14 PM PRE-OPERATION CHECKS NOTE: Pre-operation checks should be made each time the motorcycle is used. Such an inspection can be accomplished in a very short time; and the added safety it assures is more than worth the time involved. _ _ EWA00033 WARNING If any item in the Pre-operation check list is not working properly, have it inspected and repaired before operating the motorcycle.
E_5jw.book Page 1 Friday, March 30, 2001 2:14 PM OPERATION AND IMPORTANT RIDING POINTS Starting and warming up a cold engine ............................................. 5-1 Shifting .............................................................................................. 5-2 Tips for reducing fuel consumption ................................................... 5-3 Engine break-in ................................................................................. 5-3 Parking ...........................
E_5jw.book Page 1 Friday, March 30, 2001 2:14 PM OPERATION AND IMPORTANT RIDING POINTS EAU00372 5- EAU00373 _ 5 WARNING ● Become thoroughly familiar with all operating controls and their functions before riding. Consult a Yamaha dealer regarding any control or function that you do not thoroughly understand. ● Never start the engine or operate it in a closed area for any length of time. Exhaust fumes are poisonous, and inhaling them can cause loss of consciousness and death within a short time.
E_5jw.book Page 2 Friday, March 30, 2001 2:14 PM OPERATION AND IMPORTANT RIDING POINTS EC000048 NOTE: If the engine fails to start, release the start switch, wait a few seconds, and then try again. Each starting attempt should be as short as possible to preserve the battery. Do not crank the engine more than 10 seconds on any one attempt. _ _ _ ECA00045 CAUTION: For maximum engine life, never accelerate hard when the engine is cold! 1. Shift pedal N.
E_5jw.book Page 3 Friday, March 30, 2001 2:14 PM OPERATION AND IMPORTANT RIDING POINTS EAU03952 Tips for reducing fuel consumption 5 Fuel consumption depends largely on your riding style. Consider the following tips to reduce fuel consumption: ● Thoroughly warm up the engine. ● Shift up swiftly, and avoid high engine speeds during acceleration. ● Do not rev the engine while shifting down, and avoid high engine speeds with no load on the engine.
E_5jw.book Page 4 Friday, March 30, 2001 2:14 PM OPERATION AND IMPORTANT RIDING POINTS EAU00461 Parking When parking, stop the engine, and then remove the key from the main switch. EW000058 _ WARNING Since the engine and exhaust system can become very hot, park in a place where pedestrians or children are not likely to touch them. ● Do not park on a slope or on soft ground, otherwise the motorcycle may overturn.
E_5jw.