OYAMAHA [] DVD HOME THEATER ........ ........ : 4 _ _ _ SOUND SYSTEM .
10 [_:|l|ilq_l RESKOFELECTRIC SHOCK DONOTOPEN Ventilation - Slots and openings in the cabinet for ventilation and to ensure reliable operation product and to protect it from overheating, and these openings must no_ be blocked or covered. The openings should never be blocked by placing the product on a bed, Z sot), rug, or other similar surl_ce. be placed in a built-in installation CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE.
d) If the product I) not operate by following 24 Outdoor Antenna = If an outside Grounding antenna or improper adjustment of other damage and will ofien require controls may result in extensive work by a protection against voltage surges and builI-up static charges.
1 To assure carefully. the finest perfk_rn]ance, please read this manual Keep it in a sal_ place fl_r future reference. 16 2 Install this sound system in a well ventilated, cool, dry, clean place with at least 10 cm on the top, 10 cm on the left and right, and 10 cm at the back of DVR-SI00, and 20 cm on the top, 10 cm on the lel_ and right, and 10 cm at the back of SW-SI00 ------away from direct sunlight, heat sources, 3 vibration, dust, moisture, and/or cold.
[I_ RiXo]_1 _e]iilEe]_! SETUP MENU ................................................................... FEATURES .......................................................................... CHECKING THE ACCESSORIES ................................... INSTALLING BATTERIES IN THE REMOTE CONTROL ........................................................................... CONTROLS AND FUNCTIONS ....................................... Front panel ....................................................................
The DVX-SI00 is the Home Theater found in a movie The newest sporting DSP programs events, Also, will enhance the Silent Cinema Since the DVX-S 100 consists you can enjoy stronger Moreover, the Oneqouch • • • • that delivers the power program and realism of various allows you 1o enjoy receiver, bass and surroond effects of the speaker connectors connection a powerful and realistic sound experience like thai sources, the sound a cenler speaker, as well as a good designed from mo
Check yourpackage tomake sure itcontains thefollowing items. DV R-S 100 M :0 O NX-SW100 (NX-S100S x4, NX-S100C, SW-S100) Remote control Batteries (x2) (AA, R06, UM-3) AM loop antenna Fasteners (4 sets) for the center speaker Pads (2 sets: 16 pieces) r{3 M Non-skid pads (2 sets: 16 pieces) Z G_C;_G_O Indoor FM antenna (U.S.A., Canada and General models) (Europe, Australia U.K.
T (U.K. Europe, AUSllMiaand General models) O STANDBY/ON _1<_, Turns this unit on, or set it to the standby r_r>lr_r_ (v PRESET/TUNING mode. When you turn this unit on, you will hear a click and there will (DVD mode) be a 4 Io 5-second sound. Each time these buttons delay before this unit can reproduce playing Standby mode In 1his mode, this unit will consume power in order to receive remote control.
(_ INPUT Selects • =,Iv the input source Sets the priority for the types of input signals DTS, ANALOG) connecled 1_ you want to lislen Io or watch. iNPUT MODE Io receive -I (AUTO, when one component is O o tO -I 1o two or more input jacks. DSP "/* Selects the DSP program. Z 1_ STEREO Swilches between reproduction. When normal slereo STEREO and DSP effect is selected, 2=channel signals are direcled to the front lefl and right speaker,s without effect sounds.
l_!ehTIE:lellT_lV,_|A_ltaJgllh_,'_ll[eh_ This section explains the function of each button on the remote control when you operate this unit as an amplifier, no1 as a tuner or a DVD player. Make sure that the AMP mode is selected before starting operation. O CODE SET Used when setting O up the manufacturer DSP program buttons Select DSP programs Refer m "REMOTE CONTROL (DVD MODE)" on page 31 for the details about the functions of the remote button components connected to this unit.
• Using the remote control -4 Approximately O O t'O -4 6 m (20 feet) Z Handling the remote control • Do no1 spill water or other liquids on the remole control. • Do no1 drop the remote control. • Do no1 leave or slore the remote control in the following types of conditions: - high humidity or lemperature such as near a heater, stove or bath; - dusty places; or - in places subject Io exffemely low temperatures.
lo,!ehTiE=_lellk_lV__|A_lmJg;llh_[_llHeh_ This front panel display mainly displays the information related to the playback of discs. ,", I ,", "' "' mmm Ilmmmll "' mmm O Play mode indicators PGM: Programmed play / RND: Random play / C_.._:Repeat play / A-B C_.._:Repeat A-B O Disc type indicators Indicates the type of disc, For example, DVD and AUDIO lights up when playing a DVD-Audio disc.
-I _o 0 cJ ¢') -t 5 Z 0 Decoder indicators Lights up when the dllts, {m DIGITAL MATRIX are activated. lid }_ [ [I]m0LOGIC/I ) or DSP indicator Lights up when you select 1_ _ indicator VIRTUAL indicator Lights up in the virtual cinema DSP mode. Lights O Headphones indicator Lights up when headphones are connecled. _]_ B. BOOST O SP/PRE indicator The indicator of the item selected in "9 SP/PRE OUT" on the SET MENU lights up. (But it does not light up when headphones m'e connecled.
In order to enjoy sound system, follow the procedures and video images as described with this sound below. See each page for details. Installing batteries in the remote control (P,3) f Speaker setup (P.1 t) | Speaker placement (E 11 ) _• Installing the speakers (E 12) ) ] t, "Connections Connecting Connecting Connecting Connecting Turning on (P.14 - t 9) TV and audio/video components (P.14) the antennas (E 16) the speakers (P.
This unit has been designed to provide the best soundfield quality wilh a 5-speaker system, using front left and right speakers, rear left and right speakers and a center speaker. The front speakers are used for the main source plus effect sounds. The rear speakers and surround sounds sounds. (dialog, the settings (p.60) to designate speakers the included types that you with of SPEAKER the signals (with speakers, of sound use speakers Front speaker (R) \ is for the center Real"speaker (R)
• Mounting the front and rear speakers • When Placing the center speaker Place the speaker on TV whose top is flat or on the floor under the TV or inside the TV rack so that it is stabilized. When placing speaker the speaker on top of the TV, to prevent from falling down, four points on the bottom TV. put 1he provided of the speaker fasteners mounting the front and rear speakers the holes on the speakers' the at and the top of the U Put the provided on a wall, use back panels.
• I_J Hang the holes on the protruding screws. If you want to mount a speaker on a commercially available speaker stand (for the front/rear speakers) The screw holes (at an interval of 60 ram) on the bottom and the rear speaker * Those on of the speaker a screw speaker holes can be used to mount the stand. can be used with M4 screws only. 60 nlm • Make sure that the screws are securely caught by the narrow parts of the holes.
• • Types of audio jacks Types of video jacks O COAXIAL jackpin cable and provides the better Connects a coaxial quality sound than analog audio jacks. OPTICAL jack COMPONENTVIDEO Australia Transmit jacks and General color difference separately and provide (U.S.A., Canada, models) Connects quality an oplical sound Transmits • Each color and luminance the composite through • When of jack, on the video instructions incorporated video input are only output and S video jacks.
.fahWl_l_1#[Oh_i • The connection Use a commercially available example cable specified for connecting For Audio component each type of jacks. For Video Component Video pin cable Audio pin cable S Video cable Coaxial cable Optical cable Component video cable (U.S.A., Canada, Australia models) and General For A/V component Audio/Video The connection example shown cable below is just an example. Connect in accordance with the components you have. .
[_leh%q_e!ll[Oh_l " Both AM and FM indoor unit. In general, anlennas these anlennas are included should provide with this sufficient signal strength. Connect each antenna lerminals. • Connecting Connect the included correctly • Connecting the AM loop antenna [] Set up the AM loop antenna, then connect it. to the designated indoor FM antenna indoor FM antenna to the FM ANT terminal.
.fahWl_l_1#[Oh_i Connect system the included conneclor speakers cables 1o the DVD AUDIO/VIDEO as shown receiver (DVR-S 100) using the included speaker cables and below. DVD Audio/Video receiver (DVR-S100) As this terminal is used for testing at the factory, do not connect any equipment to this terminal. "1 "1 Insert the plug with its _ mark facing up.
g_lehq_q_ft,ll#[Oh_l" • Using commercially available speakers and speaker cables You can use commercially speakers excepl for available speaker cables and a subwoofer. If you use them, hole the following. • Use the speaker whose impedance is 6£2 or higher. When using Ihe speaker whose impedance I Color lube (RED) 6£2, the protection Connector may • Use place • Use Conllector cable. (BLUE) Color tube (BLUE) may start working speakers.
.fIJAWl_l_#[lli_l Plug in this unit to the wall outlet. If you want to increase the power output to the speakers, or want to use another amplifier, connect an external amplifier to the 6CH PREOUT jacks as follows. • Memory The memory 6.3.) O FRONT REAR supply However, from the is temporarily cut due to if the unit is turned off for more than one week, the stored setting will be cleared. If so, set Speaker rear channels line ouiput jack.
This section explains how to adjust using the lest lone generator. complete, should the oulput level heard at the listening and the various Logic, Dolby decoder,s (Dolby RIGHT is position This is important sound Digital, CENTER field processor; Dolby SUBWOOFER Pro Pro Logic II and DTS). this unit cannot connected the O of the digital LEFT output levels this adjustment be the same fi'om each speaker.
[] Adjust the volume The volume You can play the software components connected loaded on the audio Example: and video level. digitally. -70 dB Control to this unit. to the desired level is displayed range: VOLUME MUTE (minimum) to 0 dB (maximum) SLEEP • If you have connected OUT, or MD/CD-R a recording OUT jacks, component and you low volume during playback of other the recording compzment on.
• When you have finished this unit using (0/I) Press STANDBY/ON on the front panel (POWER on the remote mode. Io set this unit in the standby • control) • When AUTO is selected, this unit automatically determines the type of signal. If this unit detects a Dolby Digital oz"DTS signal, the decoder automatically switches to the appropriate setting. • Each time you turn on the power (t1'this unit, the input mode is set according to "8 INPUT MODE" setting on the SET MENU (see page 63 lk/r details).
This unit's built-in DSP (Digital hall and movie theater, selected audio source. Sound field Processor) with its 9 sound field programs.
No. Program 4 ENTERTAINMENT/ Game This program ENTERTAINMENT/ Concert Video This program produces jazz or rock conceit TV SPORTS With this program, 9, IX_ ...,= _=o 5 Features _,_ adds a deep and spatial f_efing to video game sounds. an enthusiastic atmosphere you can enjoy watching and lets you feel as if you are a_ an actual various TV programs such as news, variety shows music or sports programs.
• Table of Program This unit formal. aulomatically _ chooses Input _ Program No. 7 _ t MOVIE THEATER 2 9 the appropriate decoder and DOLBY DIGITAL 2 channel DSP sound field paltern according to the input 5.1 channel ANALOG, PCM, DOLBY DIGITAL, DTS MOVIE THEATER 8 Names for Each Input Format 70 mm Spectacle DGTL 70 mm Sci-Fi DGTL 70 rain Adventure 70 mm General DGTL 6.
• Selecting PRO LOGIC II You can enjoy the 2-channel discrete No. 9. channels (While playing sources by selecting decoded into five PRO LOGIC/1 a 2-channel • Some in program Press P_I Press ND/DTS. AMP. The previously selected SELECT decoder, sub program repeatedly PRO LOGIC After selecting II), select appears to select on the the mode the II. on the decoder source by pressing The selection swilches PRO LOGIC 6.
• SILENT You can enjoy CINEMA a powerful sound could expert from actual CINEMA DSR You can by connecting while DSP your the digital program indicator sound effects slereo reproduction.
Recording adjustments and olher operations are performed from the recording components. Refer Io the operation instructions for these components. • _1 result Turn on the power of this unit and all connected component. Attempting Start playback (or select a broadcast station) on the source component.
This unit is designed This unit is designed for use with following only. Never attempt unit because types of disc to load any other type of disc into this it may damage this unit. region management nmnber marked In this manual, w._um not match this unit's DVD*Audio region that supports the regional number _muu=o mmmm Video CD _muu=o does (see the table shown Region number of this unit U.S.A.
[talk,_lml_Vlgl#lgl_g,_l[l[[oJi • Playback of discs is generally particles of dust or fingerprints Even so, they should clean, dry cloth, wipe straight no1 affecled by small on their playing surface. be kepl clean. Wipe by using a Do not wipe with a circular outward motion; Starting play from a selected chapter Select a chapter using the numeric buttons (see "To select a specific track" on page 33) and press ENTER. Repeat play You can use chapter repeal or title repeat. (See page 45.
This section explains how each button on the remote control functions when you play a disc. Press DVD first when using this unit as a DVD player. • The buttons on the remote control whose names are written in green are operation buttons when you operate this unit in the DVD mode. • When pressing any of_f_ while pressing SHI_, these bultons function to operate this unit as a DVD player. SETUP Press to call up the setup menu screen. Numeric buttons/CANCEL Press to enler nmnbers.
• To stop playback Press D. STANDBY/ON Resume function This unit memorizes unit is turned When where D was pressed on (1_- indicator flashes you press _ in this status, as long as this on the display). playback resmnes from where it was slopped. "Ib clear the memory, indicator chapter press Eq once more so that the B,- goes off. (When review screen a DVD-Video disc is played, a appeases.) • Opening the disc tray cancels the resume function.
llq.*|¥liT[elF.*ll]l_[ • Search Press c>_ (or c>/t>ca (or K_/<_) search forward (or backward). on the front panel Io .,4,: • To increase the speed, press or keep pressing >%_,<< on the remole control repeatedly or keep pressing _>1>_, _-_/_-_< on the front pane].
Icons for player menu has 4 different menu bars as below. To switch the menu bar, press the cursor buttons (A, v). YOUcan control various itelns using on-screen inenu bar. @i_Play menu @ Displaymenu @ Audio menu $ _9]Videomenu ON_ RETURN (U.S.A. model) _1 Press [] Press the cursor buttons ((,)) item you wish to adjust. The selecled ilem is highlighled. I_i Press the cursor buttons (A, v, (, ;,) to change setting.
eg) DVD-Video Title number Track Karaoke number vocal (Karaoke DVD This works Chapter only) only when DISC DIRECT is functioning. Solo: OFF or ON number Duet: Group on/off OFE V1 +V2, VI or V2 number Time _11)Subtitle on/off (2) Subtitle language index hour:minute:second) Angle number You can start play I¥om the desired peint by specit}cing the elapsed Eg) If you start play from time. 1:46:50 encoded Playback order.
• Play mode menu • eg) DVD-Video Display menu eg) DVD-Video A-B repeat IENTER] ( , R46) (start point) IPB display "[ENTER] (finish Displays point) To cancel picture IENTERI *I/P/B Repeat the picture (when ON _ play ( C: Chapter, T: Track, , P.45) T: Title, OFF: Normal A: All, G: Group, OFF: play, Normal of a still of the front panel OFF Display dimmer Changes the brighmess display.
,!#lk-tOllt,_l,_l_,al_ i _ #1 • Video menu Digital When PROGRESSIVE is on (U.S.A. and Canada models) picture Digital picture mode I DVD'A I I DVD-V I[_ N: Normal mode N: Normal C: Cinema image U: User mode To change (1_ Select (suited the user fbr movie C: Cinema image (suited fbr movie viewing) viewing) Transfer MODE Selects the method of conversion fi_r mode User mode. (2_ Press progressive output to suit the type of material (<, >) m select the item you wish m being played.
• Video CD's playback If a Video CD has "playback Discs may contain multiple audio tracks, sublitles, index and bonus materials such as movie traile[_sand cast informalion, etc. And many of them have menu screens that enable you 1o control these features. This section gives you general instruction about how Io operate Ihese screens. However, the operation methods may differ depending on the disc.
CONSUMERS • If the screen shifts off center when using progressive output, see "Adjusting the screen position" described below. • When playing 4:3 aspect software with a 16:9 aspect widescreen monitor using progressive output, the picture may appear horizontally stretched to fill the screen. In that case, change the aspect to the correct one at your monitor. If the monitor cannot change the aspect, it is recommended to turn the progressive feature off.
• To play a bonus group Some discs contain password, consult bonus groups. the disc jacket, U Press D to stop [] Press GROUP [] pressing Press the cursor buttons group cursor button Enter a 4 digit To change DVD-Audio "pages" (A, v) press to select ENTER a appears press buttons press the original also has an effect of a disc recorded or the function, sound sampling quality.
• Subtitles Press Some discs are encoded multilingual disc jacket subtitles with several or multiple audio camera etc. to see which feature SUBTITLE angles. Refer to • Pressing subtitles is supported. the button repealedly toggles through all recorded on the disc. You can also use the cursor buttons change subtitles. • Subtitles button. if the disc does Press SUBTITLE. [] Press the cursor Audio tracks Press AUDIO • Angles DVDs during formats can be button buttons tracks.
IIl.(.',Jli_[Ni_lllllll_.J|;l=_lJ_[t/ll[#]lT,_ [] [] Press D to stop play. [] Press PLAY MODE while pressing SHIFT. The -Ml group play" screen appears. Press _>. [] Press PLAY MODE repeatedly while pressing SHIFT to select the program screen.
• To change or add to the program during programmed play _1 Press D repeatedly to stop programmed play. When you select this mode, this unit plays all tracks disc in random on a sequence. Press the cursor buttons (A, v) to select the order of the tracks you want to play. [] Press the numeric buttons to enter a track number. • To cancel the programmed [] Press D repeatedly to stop programmed play, [] Press the cursor buttons (A, v) to select the track you want to cancel. [] Press CANCEL.
• To cancel random U Press D repeatedly random [] Press mode to stop playback during play, PLAY MODE The "RND" indicator • Opening while pressing SHIFT, This feature allows you to mark up to 5 points so 1hat you can quickly return goes off'. to those points later. SHIFT _ the disc tray also cancels this mode. MARKER ..... • When this unit is in random mode while aVideo CD (ver.2.0) is loaded, playback control is canceled during random play.
• This function allows you Io play your desired chapter, track or disc repeatedly. Program Press repeat REPEAT programmed Each while pressing time you press REPEAT the repeat SHIFT during play. (p.42) mode changes while pressing SHI_, as follows: Eg) CO REPEAT DVD-Audio/Video-CD/CD T: TRACK: The cun'ent A: ALL: The cun'ent 1rack is played programmed repeatedly. track is played repeatedly. OFF: (returning (U.S.A.
• To cancel A-B repeat Press A-B while This function between allows you to specify two points them repeatedly. _11 A-B (U.S.A. U model) Press A-B while pressing SHIFT during play at the point where you want to start A-B repeat. This icon appeaY_ on tile video rr_onitor. • "C_,,_" and "A-" light up on the from panel display. P_I Press A-B while pressing where to end A-B repeat, you want SHIFT at the point ,_!_isiit_ tr,n appears on/he video .%,,.
With the setup menu, you can change this unit's system defaults to suit your preference and this system. I_] Press the cursor buttons (/% v) to select the desired item and press ENTER. Press the cursor buttons (/% v) to change the setting and press ENTER. When pressing ENTER, you can go back to the screen in slep 2. SHIFT _ • SETUP To go back to the previous screen Press RETURN. A,v,<,) / ENTER • RETURN To get out from the setup menu mode Press SETUP while pressing SHIFT, (U.S.A.
The following underlined. chm't shows the menu groups In the "Options" cohtmn, the factory Items Menu groups Disc and each items. settings are Options Audio _ Select the pret_rred audio Irack language. (U.S.A. and Canada French models) Spanish Original* Other** (Australia model) Frencb German Spanish Original* Other** (U.K. and Europe models) Frencb German Spanish Original* Other** (General model) Chinese Original* Subtitle _ Select the pret_rred subtit]e (U.S.A.
Menu Video Audio groups Items Options Black Level Control (U.S.A. and Canada models) Change the black level of the picture. Select "Lighter" when you connect 1o the monitor using VIDEO or S VIDEO terminal. Select "Darker" when using COMPONENT terminals. _ NTSC Disc Output (U.K., Europe, Auslralia and General models) Select video signal fommt (PAL 60 or NTSC) playing NTSC disc. (U.K.
Menu groups Items Others DVD-Video Mode Soine DVD-Audio discs contain Options the DVD-Video contents Off On Off On that can be played only by a DVD-Video player. If you want to play the contents, select "On". If not, select "Off'. Demo A demonstration of the unit's on-screen displays stains when you select "On". The demonstration stops when you press button z etc. and the setting reverts to "Off"'.
• Depending on software capability, you can prevent discs or scenes with objectionable material from being played according to your desired rating. You can select the level and lock it by designating a password. Level 8 Level of restriction becomes _verer (Level 7 to 0) in the setup menu, where you enter is displayed. I_i Enter a password 4-digit and press as lhe number gets smaller. All DVDs canno_ be played. number Unlock 8. Player: Change Password: Change Level: changes the raling.
@ Output Change your speaker When you adjust speakers while DISC DIRECT is functioning, follow the procedures described below. U P_I mode the settings of each speaker in accordance with system. Press the cursor buttons select and press a speaker Press the cursor setting buttons and press • Choices (/% v, <, _) to ENTER. (/% v) to select the ENTER.
@ Delay time (Only center/rear channels DVD-Video discs recorded Dolby Digital format) "Ib obtain the maximum effect channel source, all speaker,s distance from the listening cases the center speaker,s, speaker of Dolby be located position. However, is placed ete. You can virtually the center Digital should and rear speakers You can adjust (center, [[.i 5.1 the output level of each effect speaker,s rear L/R) using the test tone.
Indication on the front panel (example) • Preset station number Reception band Manual tuning If the signal from the station [] SelecITUNER following "Automatic Preset station group Colon *L [] Station frequency mode and goes off in tile tuning Press • Automatic [] Press INPUT control) are [] Press INPUT • / • (TUNER TUNER to select the reception is pressed, the mode as follows: FM (Tuning mode) on the remote as the input source, or "AM") Each time PRESET/BAND changes • / •
[q|'lli'r_ Automatic preset You can select tuning the preset options group and nmnber this unit will store FM stations PRESET/BAND lower or higher MEMORY [] Follow steps stations)" • Automatically AUTO/MAN'L presetting [] 1 and 2 described enables FM stations stations tune in to and 1o store up Io 40 (8 stations x 5 groups) enables you to easily tune in to any preset stalion selecting the preset stalion Press PRESET/BAND P_I Press AUTO/MAN'L indicator [] Press lights s
IglJAVI#I_ I_1 Press MEMORY on the front panel while the "MEMORY" indicator is flashing. The stalion band anti frequency appear on the front panel display with the preset group and nmnber you have selected. You can exchange The example exchanging o_1 Repeat steps 1 to 5 to store other stations.
Setting the manufacturer code (remote control signal assigned to each manufactm'er) for your TV, VCR or MD/ CD recorder on the remote control allows you to operate not only the DVX-S 100 but also your TV, VCR or MD/ CD recorder using the remote control. [] Keeping CODE digit device manufacturer controlled SET pressed, enter the t- code and the 2-digit code for the component using You can release the numeric CODE to be buttons. SET after entering the code. .
• Table of control buttons When you press the input selector button for which a manufacturer code has been set, many buttons on the remote control function differently to operate each component as shown in the table below. When you press the TV button, the TV is automatically turned on. The AV components such as VCR are turned on when you press the AV button after pressing the corresponding input seleclor buttons.
The SET MENU consists of 9 ilems including the speaker mode setting. Choose the appropriale ilem and adjust or select the values as necessary. ..4.. • You can adjust the iiems on the SET MENU while playing a Adjustment should be made wilh the remote control. SOUrCe. buttons 3 4 Items Initial settings SPEAKER SET A CENTER B FRONT C REAR LR D BASS E F. Level SML (small) SMALL SML (small) SWFR Nrm (Normal) LFE LEVEL SP LFE HP LFE 0 dB 0 dB SP DLY TIME 0 ms A_ V <,> (U:S.A.
• 1B FRONT (front speaker Choices: LARGE, mode) SMALL LARGE Use this feature speaker Io select suitable ou|put modes for your Select this if you have large front speakez_. range of the front let1 and right channel configuration. If you do no1 use one or any of the included if you use other speakez_s instead speakers, of the included or speakers, set the following. The entire signal is directed to the front left and right speakers. SMALL Select this if you have small front speakers.
• 1D BASS (LFE/bass LFE signals carry low-frequency decodes a Dolby signals are defined frequency Digital out mode) effects when this unit or DTS signal Low-frequency Use 1his feature to adjust the output The Low- (low-frequency effect) channel to both front left and Dolby Digital (subwoofer according as 90 Hz and below. signals can be directed right speakers, and the subwoofer for both stereo reproduction can be used and 1he DSP program). Select this if you use a subwoofer.
Use this fealure Use this fealure sounds. This feature from the center or DTS, 1o adjust the delay of the center channel works speaker, when there with a source etc. Ideally, the center speaker same distance from the main listening is sound output like Dolby should Digital be the position as the lefl and right speakers.
It is possible Io assign jacks according 1o the component to be used if this unit's DIGITAL INPUT jack settings (component names for jacks) differ from thai component. This makes it possible to change the jack assignment and effectively connect more components. Once you assign, you can select that component with INPUT • / • on the front panel (or the input selector buttons on the remole control). Use Ibis feature Io designate connected to the DIGITAL on this unit.
You can (cenler, atljust rear the oulput lefl and level of each and subwoofer) right, effect • speaker while lislening Io a source. For 5ch Stereo You can adjust the volume channel stereo mode. Control range: level for each channel in 5- 0 Io 100% Initial Selling: 100% • CT level (Center level) LEVEL • RL level (Rear lefl level) • RR level (Rear right level) (U.S.A. model) (While playing a source) U Press AMP.
The following table shows factory-set Program You can adjust the time difference between of the sound from the front speakers the sound effect and the beginning from the rear speaker,s. value, the later the sound time can be individually effect of Preset value (ms) 1 CONCERT HALL 2 JAZZ CLUB 3 ROCK CONCERT The delay 15 4 DISCO 26 to all DSP programs. 36 CONCERT VIDEO TV SPORTS 10 6 MONO 69 7 70 mm SPECTACLE 23 DGTL 15 MOVIE g SPECTACLE Spectacle (U.S.A.
• Changing You can adjust parameters parameter the values so the sound your listening • settings of PRO LOGIC fields are recreated lI Music accurately PRO LOGIC II Music parameter descriptions in PANORAMA room. Function: Turning stereo Choices: the function on exlcnds image to include the front the sun'ound speakers for wraparound effect. OFF/ON, initial setting is OFE DIMENSION Function: Gradually adjusts the soundfield either towards the front or towards the rear.
Refer to the chart below when this unit does not function properly. the instruction below does no1 help, set this unit to the standby authorized YAMAHA dealer or service cenler. • If lhe problem mode, disconnect you are having is not lisled below or if the power cord, and contact the nearest General Problem Cause Remedy Refer to page This unit fails to turn on when STANDBY/ ON (or POWER (O/I)) is pressed, or enters in the standby mode soon after the power has been turned on.
jl;{e]lJ;te,,*_;[_ie_ll_T[. Problem Cause Refer Remedy to page No sound from the center speaker. The output level of the center speaker rrfinimum. is set to speaker. 64 mode for your cemer 60 Rals_ the level of the center "IA CENTER" on the SET MENU is set to NON. Select the appropriate One of the Hi-Fi DSP programs (1 to 4) has been selected (except for 5ch Stereo). Select another speaker. 23-24 DSP prograin.
• Disc playback Problem Cause No response when buttons pressed. Some operations disc. Playback does not start. Tile disc is damaged. Check There Wait may be prohibited is moistm'e by the on lhe laser pickup. _he disc carefully; 1 {o 2 hours betin'e Tile disc has been loaded upside down. lrying Reload Clean Tile disc is dilay. Alternative languages fail to be selected. Refer to page Remedy alter to play the disc with replace switching it if necessary. the unit on facing up.
jl;{e]lJ;te.*_,._;[_ze_l/_T[, Problem Cause Remedy Refer to page NO on*screen display. Go to Display on the SETUP menu, and select "On" for "On-Screen Messages". 49 On-Screen Menu Icons not displayed or only partially displayed on the television. Press the cursor buttons IA,V] while the rightmost icon is highlighted to change the menu bar position. 34 There is a lot of ghosting. Use the on=screen picture quality. 37 "No Play" appears on the unit's display.
_gIolll_le:_gleIeHh_: • Tuner Problem Cause Refer Remedy to page FM/ AM Previously preset stations cannot be tuned in. FM stereo noisy. FM reception is The preset stations are cleared. Pre-se_ the stmions once again. The characteristics Check the antenna of FM stereo Try using a high-quality antenna. There is distortion, and clear reception cannot be obtained even with a good FM antenna. There Adjust the antenna lx_sition to eliminate multip_th interthrence.
Bitstream Dolby Pro Logic This is the digital form of multiple channel audio data (eg., 5.1 channel) before it is decoded into its various channels. Dolby Pro Logic II is an improved CINEMA decode Since the Dolby originally software. designed anti DTS systems for use in movie for acoustic having effects. were theaters, many speaker,s measured YAMAHA original number the visual in lhe lislening dala, YAMAHA movie mode.
Interlace NTSC, progressive output and the video signal standard, scan lines, whereas progressive nmnber of scan lines. This is called this unit's scanning COMPONENT VIDEO output OUT terminals higher quality OUT terminals (progressive) resolution. are also able to handle video signals 6.1 The unit incorporates Digital existing 5.
SILENT CINEMA YAMAHA has developed DSP algorithm Parameters a natural, realistic sound effect for headphones, for headphones field so that accurate have been set for each sound representalions programs can be enjoyed S video signal of all the sound field using headphones.
AUDIO SECTION SPEAKER SECTION • Minimum RMS Output Power FRONT L/R, CENTER, REAR L/R 1 kHz, 0.9% THD, 6 £2 ........................................................ [U.S.A. and Canada models] 20 Hz to 20 kHz, 0.9% THD, 6 £2 ..................................... SUBWOOFER • Front and Rear Speakers Model Name ................................................................. 100 Hz, 0.9%THD, • Maximum FRONT 5 £2 ......................................................
LIST OF MANUFACTURER'S TV CODES Sony Sylvania Telefunken Thomson Toshiba Videch Wards (Device Code: 2) Yamaha Admiral Aiwa Akai Alba AOC BellAYHowell Bestar 99 92 94 95 96 97 92 98 92 93 76 96 Blaupunkt Blue sky Brandt Bmcsonic Bush Clatronic 29 98 23 97 96 98 22 Craig Croslex Curtis Mathis Daewoo 24 25 97 97 26 98 24 27 Daytron Dual Emerson 39 98 97 24 39 32 Ferguson First line Funai Fisher Fraba GE Goodmans 23 98 77 95 98 93 96 65 66 97 98 34 23 Grundig Hitachi ICE lrradio Itt!Noki
Realistic Samsung 93 9728365962 54 5863 (_4 65 (if) Sansui Sanyo Schneider Scott Seleco Sharp Siemens Signature 2000 Sony Sylvania Symphonic Tandberg Tashiro Tatung Teac Technics Teletunken Thorn Toshiba Universum W.
OYAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATtON, USA 6660 ORANGETHORPE AVE BUENA PARK, CALiF 90620, USA CANADA MUSIC LTD. 135 M_LNER AVE, SCARBOROUGH, ONTARIO M_S 3R1, CANADA ELECTRONIK EUROPA G.m,_.H, SIEMENSSTR 22-34, 25462 RELL_NGEN BE_ HAMBURG, FR OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBRO_SE CRO_ZAT [{pT0 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE YAMAHA YAMAHA ELECTRONICS SCANDINAVIA YAMAHA MUSIC CEDEX02, FRANCE YAMAI _A COkP©P_AT!ON (ILK) LTD.
