@YAMAHA DVD CHANGER LECTEUR DE DVD CHANGEUR DV-C OWNER'S MODE MANUAL D'EMPLOI
iMPORTANTSAFETY iNSTRUCTiONS 12 1 13 wJlhh] an equiJller d Iri ingle, Js intended to ak'rl VOII 10 the pie _l)ce power outlet only one way. This is a safety I_atuJ_. I]! you al_ unable to in_ert the plug fully into the outlet, try J_versing the plug. If the plug should still I_il to fit, contact your electrician to J_place your obsolete outlet. Do not del_al the safety purpose of the polarized phlg. Power-Cord oJ uJ/h]sLIJaled %11J/_l"ot]s The lighming Jllsh with arrovd/e M symbol.
FCC INFORMATION 1. iMPORTANT NOTICE: This product, when installed not expressly approved 2. IMPORTANT: Cabieis as indicated by Yamaha When connecting supplied your FCC authorization in tile instructions in this manual, granted meets FCC requirements. Modgications by the FCC, to use the product. and/or another MUST be used. Follow aii installation to use tHs product hasbeen contained may void your authority, this product to accessories with this product 3.
1 Toassur_ thefinest pelfbrmance, please read this 15 manual carefully. Keep itinasafe place forfuture tolerance, 2 Install this unit in a well ventilated, cool, dr},, clean 16 this unit is faulty. Before moving this unit, press STANDBY/ON 11 set the unit in standby mode, and then disconnect the AC power plug from the wall outbt. Install this unit near the wall outlet and wher_ the place away fiom direct sunlight, heat sources, vibration, dust, moistu_s, or cold. In a cabinet, allow about 2.
Contents Special VCD Introduction & SVCD Playback control Region codes ........................................................................... Supplied Notes accessories 2 ............................................................... 2 on discs ........................................................................ 2 Cleaning Patent discs .......................................................................... information 2 ............................................................
introduction Thank you for purchasing this unit. This - Do not use discs with tape, seals, or - paste on their surface. Doing so may damage this unit. Do not use discs affixed with labels Owner's Manual explains the basic operation of this unit. printed by a commercially available label printer. DVD discs must be labeled ALL regions or Region 1 (U.S.A. model) in order to play on this unit.
Functional Overview ® l_ Disc tray Loads up to S discs in the disc tray. (7 1441/_14 Searches backward.* Moves to the previous chapter or tracl<. ,_2,,A (OPEN/CLOSE) Opens or closes the disc tray. ,3_ PLAYXCNANGE Reloads or unloads discswithout interrupting current disc playback. (4) II (STOP) Stops playback. (8- Front panel display Shows the current status of this unit. ,:9_DISC (1, 2, 3, 4, S) / LEDs Selects and directly plays back the preferred disc.
Functional _) AUDIO OUT Overview (L/R) jacks (4) Connect to the audio input jacks of you=" AV receiver or stereo system. _2_ DiGiTAL OUT - COAXIAL Connect to the coaxial AV receiver. _3) VIDEO OUT input OUT - S VIDEO Connect to the S-video AV receiver. jack input jack of your _5) VIDEO OUT - VIDEO jack Connect to the composite video input jack of your AV receiver. 6) AC power cord Connect to a standard AC outlet. - COMPONENT (Y/PB/PR) jacks Connect to the component your AV receiver.
Functional Overview (|) STOP Stops playback. 7} SUBTITLE Selects the subtitle language. _{8_ ANGLE Selects the DVD GD CD C]DII _at_ camera angle. _9s REPEAT Repeats the chapter, all discs. .......... _:J13" track, title, disc or ,_Q) A-B Repeats a specific segment. j-t_ _TOP PLAY _ - :_fi_Numeric buttons (0-9) Selectsnumbered items in the currently displayed menu. ON SCREEN Accesses ;;; ]l t or exits display (OSD) fi*onl the on-screen menu of this unit.
Preparation You need to set "DiGiTAL Never make or change connections the power of this unit turned • Depending with you wish - select the appropriate audio format from the menu screen on the disc Refer to the manuals of your other components as necessary to make the best connections. . . Pressing AUDIO on the remote control once or more may change not only the audio language but also the audio format. The Do not connect this unit via your VCR.
Preparation Component If your AV receiver has video output jacks, connect your receiver and then your TV so that you can use one TV for several different video sources (LD, VCR, etc.) by simply switching the input source selector of your AV receiver. This unit has three types of video output jacks. Use the one that corresponds to the input jacks of the component to be connected.
Using the remote control oo00 Point the remote the remote within i Open the battery compartment. 2 Insert the two suppled batteries (AA, R06, UM-3) following the indications (+/-) control control o at sensor, approximately 6 m (20 ft) from the unit. inside the compartment. 3 Close the cover. Notes: - - - - Insert batteries correctly according to the polarity markings (+/-). The batteries control immediately with new ones to prevent a leakage.
Getting When "SCREEN "OFF" 1 Connect outlet. is set to (see page 22): The background the AC power cord to an AC SAVER" Started or the paused picture is displayed for 30 minutes. 2 Turn on your TV and AV receiver. 3 Select the appropriate input source of the AV receiver connected to this unit. Refer This unit is set to the standby mode. to the manual supplied with your AV receiver for details. 4 Turn on this unit. S Set the TV to the correct Video IN channel. (e.g.
PAL Select this if the connected Setting TV TV is a PAL system TV. It will change the video signals of NTSC discs and output them in PAL format. for your match your TV. If the aspect ratio of your TV is4:3, you do not needto change this setting. If you have a wJdescreen TV, change this setting according to the TV is compatible with both NTSC and PAL formats (such as a multi-system TV). The output format will be in accordance the video signals of the disc.
Getting Started Setting the audio, subtitle and disc menu languages You can select your own preferred language settings. This unit automatically switches to your preferred language whenever you load a disc. If the selected language is not available on the disc, the default language of the disc will be used instead. The OSD language in the system menu remains once selected. Setting the OSD language 1 Press STOP SETUP. :2 Press I_ repeatedly to select "PREFERENCE PAGE".
Disc Operations IMPORTANT! - To stop playback, If the inhibition appears on the TV screen when a button is pressed, the function for that button is not available on the current - disc or at the • time, on the (1) on the remote To play back a specific disc directly, press DISC SKIP repeatedly on the remote control or press DiSC (l, 2, 3, 4, 5) on the front panel. " Press PLAYXCHANGE on the front Depending on the DVD or VIDEO CD disc, some operations may operate differently restricted.
Disc Selecting • a traddchapter Press k_ buttons Operations / _lD_t or use the numeric (0-9) to select a track/chapter number. . During repeated playback of a track/ chapter', press _41 / _1_1 to replay the same track/chapter. Searching to select To resume normal PlAY (1_). the desired playback, press _ I _ key may not be available with some discs. For MP3 and WMA, the search function allows you to search the track currently being played.
Disc Operations Repeating a section within a chapter/track I While playing a disc, press A-B at the desired starting point. :2 Press A-IB again at the desired • A and B can only be set within chaptedtrack. The selected section Using end point. menu To select a playback feature • Use _I_IAIV or the numeric repeats To exit from the sequence, disc Depending on the disc, a menu may appear on the TV screen once you load the disc. the same continuously.
Disc Zooming 1 in On-screen (OSD) This function allows you to enlarge or lessen the picture on the TV screen and pan through the enlarged picture, The OSD menu shows disc playback information (e.g., the title or chapter number, elapsed playing time or audio/ During playback, pressZOOM subtitle language). A number of operations are possible without interrupting disc repeatedly to display the picture at different scales. • Use _II_IAIT to pan through the enlarged picture. •_ Playback continues.
Disc Operations Tide/Chapter/Track (DVDIVCD) I Press AIr selection to select [TITLE] [CHAPTER] (DVD) Repeat/Time 1 or (VCD). 2 Press ENTER/OK selection. 3 Select a title, chapter or track number using the numeric Time I search Press AI_" buttons . 2 the (0-9). to select [TT TIME] or [CH to confirm the Press A/Y to highlight your selection, then press ENTER/OK.
Disc Operations Audio Changing format the audio language and/or Playing Press AUDIO repeatedly audio language. to select an I by discs Load a disc. -_ Playback Subtitles • Press SUBTITLE repeatedly a subtitle language. Playback control For VCD with (PBC) feature displays the current playback status and the number of tracks to select the desired track. to select 2 Playback stops at the end of the disc. 3 To stop playback, control 2.
Disc Operations During playback, you can: • Press k_l_l / I_k to select another track/file in the current folder. . Press PAUSE (ll) to pause playback. Note: - It may not be possible to play certain MP3/ JPEG discs due to the configuration and characteristics conditions. Selecting 1 a folder Press A/Y press of the discs or the recording to select ENTER/OK 2 Press A/Y 3 Press ENTER/OK selection.
Disc Scan • Operations effect Press ANGLE scan effect. repeatedly to choose a Various scan effects appear in the top left corner of the TV screen. Playing pictures 1 MP3 music and JPEG simultaneously Load a disc chat contains both music and picture data. The disc menu appears on the TV screen. 2 Select an MP3 track. 3 During MP3 music playback, select a picture from the TV screen, and then press PLAY (_). The picture files are played back one after another until the end of the folder.
Setup Menu Setup is carried out on the TV screen, UNLOCK enabling you to customize this unit to suit your own particular requirements. Select this to unlock the disc and allow future playback. Press A/T 1 Press SETUP. 2 Press _1/1_ to select the "General icon. 3 to select a setting, and then press ENTER/OK selection. Press ENTER/OK selection.
Setup Press ENTER/OK selection. to confirm your Program: Menu Disc You can play back discs in the desired order by programming the discs to be played. You can store up to 5 discs. In "GENERAL SETUP PAGE", press A/T to highlight [PROGRAM], and then press to select [FDS]. Press ENTER/OK selection. To input your chapters 3 favorite Use the numeric 4 Use _ I _'I,LIT tracks/ buttons a valid track/chapter to confirm your (0-9) to enter number. to move the cursor next position. .
Setup Menu To start • program Use _I_IAI'V the program ENTER/OK. Playback playback Sleep to highlight [START] This feature automatically sets this unit to standby mode after a certain elapsed period. menu and then press starts for the selected or discs in the programmed timer on tracks 1 sequence. In "GENERAL to highlight To exit from program playback • Use'_/l_/t_/v to highlight [EXIT] on the program menu, and then press ENTER/OK. OSD derails, see "Setting page 11.
Setup Setting the analog PCM output ONLY Select this only if your receiver Set the analog output to match the playback capability of this unit. 1 Menu is not capable of decoding multi-channel signals. In "AUDIO SETUP PAGE", press A/_ to highlight [ANALOG OUTPUT], and then press I_. audio Note: If'your receiver cannot decode DTS, no sound output from DTS signals in any mode. STEREO Select this to change the channel output to LPCH stereo, which only delivers sound from the two front speakers.
Setup CD Menu ON i upsarnpEng Select this to level out the volume, Use this feature to convert your music CD to a higher sampling rate using sophisticated digital signal processing for OFF better sound quality. If you activate the upsampling function, this unit automatically switches to the stereo mode. 1 This feature is only available for movies with the Dolby Digital mode.
Setup Setting the TV Menu display Set the aspect ratio of this unit to match your TV. The format you select must be available on the disc. ©therwise, the TV display setting will not affect the picture during playback. In "VIDEO SETUP PAGE", press A/V to highlight press _. and then Press AIr [TV DISPLAY], to highlight one of the following options.
Setup Menu Progressive This feature is only valid if you have connected this unit to a progressive scan TV through the component video jacks (see "Component page 7). 1 In "VIDEO highlight video jacks " SETUP PAGE", [PROGRESSIVE], on press A/V and then to press CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 52.
Setup If you selected [PERSONAL] in step 1, proceed to steps 4-7: The "PERSONAL PICTURE Selecting the black Menu level If you set the TV type to NTSC, set the black level shift to ON to improve the color contrast during playback. The black SETUP" menu appears. 1 level setting set to PAL. has no effect if the TV type is In "VIDEO SETUP PAGE", to highlight press I_. [BLACK LEVEL], and then press A/V o__N Select this to enhance the black level. OFF 4 Press A/Y options.
Setup Menu ON Select this to enable function. the closed caption 1 Select this to disable function. Press A/Y to select press ENTER/OK selection. Switching 1 Press STOP (|) twice to stop playback (if necessary), and then press SETUP. OFF the the closed 2 caption Press _l / _ to select the "Preference Setup" icon. a setting, to confirm 3 and then your Press ENTEWOK selection. to confirm your Audio, and menu YUV/S-video Use this feature to toggle output between S-video.
Setup In "PREFERENCE PAGE", press A/T highlight [PARENTAL], to PBC and then press i_. (Playback Menu control) You can turn on or off PBC. This feature is available only on Video CD 2.0 with the playback control (PBC) feature. For details, see "Playback page 17. HP3/JPEG control (PBC)" on menu HP3/]PEG Navigator can be set only if the disc was recorded with a menu.
Setup Menu Changing the 3 password Use the numeric buttons (0-9) The same password is used for both Parental Control and Disc Lock. Enter your old six-digit password. . When doingthis for thefirsttime, "000 000". your six-digit • password when prompted on the screen. The default password 000. In "PREFERENCE PAGE", press A/V highlight [PASSWORD], to select [CHANGE]. is 000 to and then press I_ If you forgot password, your old six-digit Enter the new six-digit password.
Language These codes can be used to select options in "AUDIO", "SUBTITLE" other languages. This or "DISC MENU".
Language Code These codes can be used to select options in "AUDIO", "SUBTITLE" 32 other languages. This or "DISC MENU".
Troubleshooting Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the power cord, and contact the nearest authorized YAMAHA dealer or service center.
Troubleshooting No audio at digital output Check tne a@_al connec_ ons - au are pla/in£ a DTS source cnecKtnat 'our recewer can aecc Je DTS a-d "DIGITAL OUT D JT" is set to "ALL see _age 23) ,ou are pla/Jn£ a HPEG-2 sou_c_ cnecKtnat our recewer can decode HPEG-2. Otherwise _aKe sure DIGITAL OUTPL T" is set to "PCH ONLY' see pa£e 23 Check if the audio format ol the selecteo auo ) lan£ua£e q'_atcne_ Disc does not bur receiver The DVD+P4R\N play CaDaDHIIles DVD-R/R'v_ CD-P4R/v must be finahzea.
Glossary Analog: Sound that has not been turned numbers.Analog into sound varies, while digital sound has specific numerical send audio through two surround developed values.These jacks channels, the left and right. As _:A containing to six channels of digital audio (front right, surround up left and left and right, center and subwoofer). ect ratio: The ratio of vertical and DTS: Digital Theatre Systems.This horizontal horizontal sizes of a displayed image.The vs.
Glossary ProEressive scan: lines of a picture It displays all the horizontal at one time, as a signal frame. This system can convert from the interlaced DVD into progressive connection format to a progressive dramatically display. It increases the vertical _A video for resolution. system for allowing discs to be played back only in the region designated beforehand.This compatible unit only plays discs that have region codes.
Specifications PLAYBACK SYSTEM TV STANDARD DVD-Video Number Video Playback CD & SVCD (PAL/S0 of lines Nz) (NTSC/60 Nz) 625 525 Multistandard (PAL/NTSC) CD PICTURE CD-R, CD DVD+R, Y Output Cinch (green) PB/CB Output Cinch (blue) PR/CR Output Cinch (red) S-Video Mini DIN, DVD+RW DVD-R, DVD-RW VIDEO Video CONNECTIONS CD-RW Output 4 pins PERFORMANCE (CVBS) S-Video Output 1 Vpp into output 75 ohm Y: 1 Vpp into 75 ohm C: 0.
@YAMAHA 02005 YAMAHA CORPORATION All rights reserved. YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPEAVE BUENA PARK CAUF 90620 USA YAMAHA CANADA MUSIC LTD 135 MILNER AVE, SCARBOROUGH ONTARIO MIS 3R1 CANADA YAMAHA ELECTRON_KEUROPA 6m.bH SlEMENSSTR 22 34 25462 RELLINGENBEI HAMBURG¸GERMANY YAMAHA ELECTRON_QUEFRANCE S.
