ELECTRONIC DRUM KIT DTX402K DTX432K DTX452K Owner’s Manual EN
For Instrument SPECIAL MESSAGE SECTION This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. WARNING: Do not place this product in a position where anyone could walk on, trip over, or roll anything over power or connecting cords of any kind.
For AC adaptor and Instrument FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used.
For AC adaptor This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3(B) (can_b_02) Explanation of Graphical Symbols C AUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
Contents PRECAUTIONS ............................................ 4 Practicing in Training Mode ...................... 31 Welcome....................................................... 7 Before Training ................................................ 31 Detailed Training settings ................................ 31 After Training ................................................... 31 Switching to a different exercise ...................... 31 1. RHYTHM GATE ...........................................
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING Please keep this manual in a safe and handy place for future reference. For AC adaptor WARNING CAUTION • This AC adaptor is designed for use with only Yamaha electronic instruments. Do not use for any other purpose. • Indoor use only. Do not use in any wet environments. • When setting up, make sure that the AC outlet is easily accessible.
CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other property. These precautions include, but are not limited to, the following: Power supply/AC adaptor Location • Do not connect the instrument to an electrical outlet using a multipleconnector. Doing so can result in lower sound quality, or possibly cause overheating in the outlet.
NOTICE Information To avoid the possibility of malfunction/damage to the product, damage to data, or damage to other property, follow the notices below. About copyrights Handling and Maintenance • Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio may generate noise.
Welcome Thank you for purchasing this Yamaha product. To get the most out of your DTX402 series Electronic Drum Kit, be sure to read this Owner’s Manual carefully. And after reading through this manual, be sure to store it in a safe place so that you can refer back to it again as needed. About the Manuals The following manuals are provided for using the DTX402K, DTX432K, and DTX452K. These manuals are intended for users of the DTX402K, DTX432K, and DTX452K.
Setup First Steps Setup 1 2 Open the box and confirm that all parts are present and correct. Assemble the parts. • The assembly process is described in detail on pages 9 through 20. 3 Make the necessary connections. • Connect the pads to the drum module using the cables provided. See page 20. • Connect the AC adaptor to the drum module and turn on the module. See page 21. 4 Play your electronic drum kit.
Setup Package Contents After opening up the package containing your electronic drum kit, please verify that all of the following parts are present. DTX402K Rack (Large) Rack (Small) Hi-hat holder Cymbal holders (×2) No Stopper Stopper Cymbal/hi-hat pads (×2) Crash cymbal pad Drum module Sensor (bumps) HH40 Hi-hat controller Drum key KU100 Kick unit Cable bands (×2) Nine-channel snake cable AC adaptor * May not be included depending on your area. Check with your Yamaha dealer.
Setup Package Contents DTX432K Rack (Large) Rack (Small) Hi-hat holder Cymbal holders (×2) No Stopper Stopper Cymbal/hi-hat pads (×2) Crash cymbal pad Drum module Sensor (bumps) HH65 Hi-hat controller Nine-channel snake cable KP65 Kick pad Drum key FP6110A Foot pedal Cable bands (×2) AC adaptor * May not be included depending on your area. Check with your Yamaha dealer.
Package Contents Setup DTX452K Rack (Large) Rack (Small) Hi-hat holder TP70S Snare pad Cymbal holders (×2) No Stopper Stopper Cymbal/hi-hat pads (×2) S wing bolt Crash cymbal pad Drum module Sensor (bumps) HH65 Hi-hat controller Nine-channel snake cable KP65 Kick pad Drum key FP6110A Foot pedal Cable bands (×2) AC adaptor * May not be included depending on your area. Check with your Yamaha dealer.
Setup Assembly Guide Fully assembled drum kit (DTX452K shown) Step 10 Step 9 Step 8 Step 5 Step 9 Step 7 Step 6 Step 4 Step 2 Step 3 Step 1 Step 12 Step 11 Step 12 CAUTION • Choose a flat, hard surface on which to assemble your electronic drum kit. • Take care to avoid mixing up parts or assembling them in the wrong direction. In addition, the assembly steps should be completed one at a time in the order described.
Assembly Guide Step 1 Setup Standing up the Large rack Rack (Large) Toms 1. 2. 3. Stand up the Large rack with the rear of the tom pads facing towards you as shown in the figure. Loosen the key bolt using the drum key. Pull the shorter leg towards you. Step 2 Standing up the Small rack Rack (Small) Top view 70° 1. Stand up the Small rack as shown in the figure and support it by hand. For the DTX452K, the snare pad will be attached to the Small rack in the following step. 2. 3.
Setup Assembly Guide Step 3 Assembling the rack Rack (Large) Rack (Small) Top view Joint 1. 2. 110° 110° Loosen the key bolt on the rack (Large) and turn the joint around before sliding the Small rack (in the next step). Slide the Small rack fully back into the joint in Step 1. For the DTX452K, the snare pad will be attached to the Small rack in the following step. 3. Open the left and right legs as shown in the Top view.
Assembly Guide Step 5 Setup Rotating the pads into place For DTX402K and DTX432K Step 5 applies to each of the four pads. For DTX452K Step 5 applies to each of the three tom pads. For adjusting the snare pad, see Step 4 . Snare pad 1. 2. Loosen the key bolt on each of the pads. Rotate the pads to positions where they will be easy to play. (If necessary, refer to the picture of the properly assembled kit on page 12.
Setup Assembly Guide Step 7 Attaching the hi-hat pad Adjusting the position of the hi-hat stopper Stopper Playing position 1. 2. 3. Loosen the key bolt on the stopper, which is located at the top of the hi-hat holder. Adjust the position of the stopper until it is straight in the back (as shown in the illustration) from your playing position. Tighten the key bolt to secure the stopper. Assembling the hi-hat pad 1. 2. 3. 4. 5.
Assembly Guide Step 9 Setup Attaching the cymbal holders Playing position 1. 2. Loosen the four key bolts at the ends of the tom 1/2 part. Insert the cymbal holders into the ends of the top 1/2 part. Then adjust the angles of the cymbal holders until they are oriented as shown in the figure. NOTE The two cymbal holders are identical. • When correctly inserted, the tips of the cymbal holders will protrude slightly from the bottom of the tom part.
Setup Assembly Guide Step 11 For DTX432K and DTX452K Assembling the kick pad 1. Remove the four wing bolts, spring washers, and flat washers from the kick pad, and arrange each set nearby in the disassembled condition. 2. Assemble the base to the kick pad as shown below, and then from the base side, assemble the wing bolts, spring washers, and flat washers removed in Step 1 in order to secure it in place. Kick pad Wing bolt Spring washer Base Flat washer Kick pad Kick pad 3. 4.
Assembly Guide Step 12 Setup Positioning the hi-hat controller and kick drum Arrange the hi-hat controller and the kick drum parts or kick unit as shown in the figure. IMPORTANT The hi-hat controller and the kick unit from the DTX402K are almost identical in appearance. They can be told apart by the sticker on the base section.
Setup Assembly Guide Step 14 Connecting the pads to the drum module TOM2 TOM1 CR Trigger input jacks on the drum module RIDE HH SNR TOM1 TOM2 TOM3 RIDE CR HH SNR RIDE HH HHC KICK TOM3 SNR KICK DTX402K 1. KICK HHC HHC CR TOM1 TOM2 TOM3 KICK HHC Nine-channel snake cable Insert the mini plugs* at one end of the nine-channel snake cable into the correct trigger input jacks (SNARE to KICK/ PAD) on the drum module. (*: The smaller set of plugs.
Setup Setting Up for Sound Connecting the Power 1. Ensure that your drum module is turned off (i.e., none of the buttons are lit). 2. Insert the AC adaptor’s DC plug into the [ ] connector on the bottom panel of the module. 3. Hook the AC adaptor cord around the cord clip to prevent it from being accidentally pulled out. Connecting Headphones or Speakers Your drum module does not have built-in speakers.
Setup Setting Up for Sound Turning On the Drum Module 1. If you have connected your drum module to other audio devices such as powered speakers, ensure that the volume on all other devices is turned down fully. 2. Press the [ ] (Standby/On) button. The drum module will turn on and its buttons will light up. NOTICE • In certain modes of operation, the Auto Power-Off function will not turn off the drum module when the set time has elapsed.
Setup Panel Controls & Functions Control Panel Drum module v c x b n z m , z Mode switch • Press this switch to switch Play Mode and Training Mode. (pages 26, 31) b [TEMPO] buttons (page 30) Use these buttons to increase or decrease the tempo in steps of one BPM. *: In Menu Mode, it is also used to increase or decrease settings. • Hold down this switch to select Menu Mode. (page 41) x [DRUM ON/OFF] button (page 28) Use this button to mute and unmute drum parts from a practice drum pattern.
Setup Panel Controls & Functions Bottom Panel . ⁄0 ⁄1 . [USB TO HOST] terminal (page 58) Connect a computer or smart device such as an iPhone or iPad to send and receive digital signals (audio and MIDI). Additional parts are required for connecting an iPhone or iPad. For more information, refer to “iPhone/iPad Connection Manual” (PDF). ⁄0 [AUX IN] jack (page 21) The Auxiliary Input stereo mini-jack is used to input audio from an external source.
Basic Techniques Playing Techniques Basic Techniques Snare Pad Hi-hat Cymbal If using a TP70S Snare Pad with the DTX452K, you will be able to produce three distinct sounds (i.e., head, open rim, and closed rim) depending on where you strike it, much the same as if you were playing an acoustic snare. Closed rim shots (Rim 2) Open/close • You can produce an open hi-hat sound by striking the hi-hat pad with the hi-hat controller’s pedal not depressed.
Basic Techniques Performing with a Selected Music Category The drum module comes with ten different music categories. When you select a music category, the corresponding “kit” (referring to a full set of drum-sound assignments for all of the pads) and song will be automatically selected. Selecting a Music Category 1. Press the Mode switch to turn the “PLAY” light on (Play Mode). 2. Select a music category by pressing the corresponding number button [1] to [10].
Performing with a Selected Music Category Performing with a Song 1. 2. Basic Techniques Adjusting the Song Volume Press the Mode switch to turn the “PLAY” light on. Select a music category by pressing the corresponding number button [1] to [10]. The selected number button will light up and the corresponding song will be automatically selected. While holding the [ ] button, press either the VOLUME[+] or VOLUME[–] button.
Basic Techniques Performing with a Selected Music Category Adjusting the Volume of Muted Drum Parts If you press the [DRUM ON/OFF] button while playing a song, the drum parts from the song will be muted—that is, their volume will be reduced to zero. If, however, you would like the drum parts to be slightly audible in this type of situation, you can adjust the muted volume as described below. 1. Press the [ ] button to start the song.
Basic Techniques Using the Metronome Playing your electronic drum kit along with the built-in metronome is a great way to perfect your rhythm. Starting and Stopping the Metronome Confirming Tempo Whenever necessary, you can confirm the drum module’s current tempo from the flashing pattern of the number button lights and the voice guidance. The larger the value, the faster the tempo becomes. • Press the [ • Press the [ ] button to turn on the metronome.
Basic Techniques Using the Metronome Adjusting the Tempo 2. The following three methods are available when you want to change the tempo. After entering all necessary digits, remove your finger from the [ ] button. The drum module will speak the new tempo to you (in English). NOTE • Number button [10] is used to enter the value zero. You cannot use it to enter the number ten.
Basic Techniques Practicing in Training Mode With ten different types of training available, you can learn how to play drums and master them in an enjoyable way. Basic training Advanced training Working on your rhythm: — Going on to mastery after Basic training! — Rhythm Gate (2 types) . . . . . . . . . . . . page 32 Measure Break . . . . . . . . . . . . . . . . . . page 36 Change Up . . . . . . . . . . . . . . . . . . . . . page 37 Playing along with a song: Song Part Gate . . . . . . . . . . . . .
Basic Techniques Practicing in Training Mode 1. RHYTHM GATE 2. RHYTHM GATE Working on your rhythm: ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 1. RHYTHM GATE, 2. RHYTHM GATE Rhythm Gate is an exercise for improving your timing along with a song or the metronome. When you strike with perfect timing, the number buttons [5] and [6] flash together. When you strike too early or too late, no sound is produced.
Practicing in Training Mode Basic Techniques 3. DYNAMIC GATE Playing with dynamics: ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 3. DYNAMIC GATE Dynamic Gate is an exercise for playing pads with proper dynamics. Your aim is to control three levels: Weak, Normal and Strong. When you strike with the wrong dynamics, it will not produce any sound. How accurately you strike with the proper dynamics is evaluated at the end of the exercise.
Basic Techniques Practicing in Training Mode 4. SONG PART GATE Playing along with a song: ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4. SONG PART GATE Song Part Gate is an advanced exercise for playing actual drum patterns along with a part of a song. For example, you can practice just the fill-in part in the song, or only the hand parts of the basic drum pattern of the song. Before working on Song Part Gate, it would be better to master the other basic training programs.
Practicing in Training Mode Basic Techniques 5. SONG SCORE GATE Playing along with a song: ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 5. SONG SCORE GATE Song Score Gate is a final exercise for playing actual drum patterns along with an entire song.
Basic Techniques Practicing in Training Mode 6. MEASURE BREAK Working on your rhythm: ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 6. MEASURE BREAK Measure Break is an exercise for keeping a steady tempo without the metronome. How accurately you strike the first beat of the measure after the break is evaluated. Once you master Measure Break, you can keep a steady tempo even after breaks or fill ins. Evaluate the first beat With Metronome (fully-lit) Procedure 1.
Practicing in Training Mode Basic Techniques 7. CHANGE UP Working on your rhythm: ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 7. CHANGE UP Change Up is an exercise for playing seven different rhythms that change every two measures. How well you maintain good timing along with the rhythms is evaluated. Try your best to keep a steady tempo—even when the rhythms change! 3 3 6 Rhythm Procedure 1. Press the Mode switch to turn the “TRAINING” light on.
Basic Techniques Practicing in Training Mode 8. PART MUTE Practicing by parts: ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 8. PART MUTE Part Mute is an exercise which you can mute any or all of the drum parts (such as snare and kick) and the instrument parts (non-drum parts) from a song. You can select the drum parts/instrument parts to be muted by pressing the corresponding number buttons.
Practicing in Training Mode Basic Techniques 9. FAST BLAST Playing as fast as you can: ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 9. FAST BLAST Fast Blast is an exercise for striking pads as fast as possible within a time limit (60 seconds). The half lit number buttons indicates the remaining time. The exercise ends when the number buttons are all turned off.
Basic Techniques Practicing in Training Mode 10. RECORDER Recording your play: ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 10. RECORDER Recorder allows you to easily record your performances. You can use those recordings not only for listening back and checking your progress, but also for playing along with yourself! Keep in mind that this training is not scored. Procedure 1. Press the Mode switch to turn the “TRAINING” light on.
Advanced Techniques Setting Parameters using Menu Mode Advanced Techniques Menu Mode is used to set drum-module parameters and functions, which are arranged into the following seven groups. z Metronome Settings 1-1. Pattern ............................................................ Page 42 1-2. Beats .............................................................. Page 42 1-3. Sound............................................................. Page 42 1-4. Number Button Lighting Pattern ...................
Advanced Techniques Setting Parameters using Menu Mode 1-2. Beats z Metronome Settings Steps: Hold down the Mode switch [1] [2] Setting 1-1. Pattern Steps: Hold down the Mode switch [1] [1] Setting Setting Setting You can set the metronome to between 1 and 9 beats in length. You can set one of eight patterns for the drum module’s metronome. 1. 2. 1. 2. Hold down the Mode switch to activate Menu Mode. 3. 4. Press number button [2] to select the Beats parameter.
Setting Parameters using Menu Mode 4. Select a new metronome sound using the corresponding number button [1] to [7]. Number button Setting [1] Metronome click 1 [2] Metronome click 2 [3] Cowbell [4] Drumsticks Advanced Techniques x Kit Settings 2-1. Pad Sound Steps: Hold down the Mode switch [2] [1] Setting Setting [5] Claves [6] Spoken count 1 [7] Spoken count 2 (with measure number) 1-4.
Advanced Techniques Setting Parameters using Menu Mode 4. 2-3. Pad Tuning Steps: Hold down the Mode switch [2] [3] Setting Set the parameter using number button [1] or [2]. The available settings are as follows. Number button Setting Setting [1] Off [2] On NOTE • While the Double Bass Drum function is enabled, you will be unable to use the hi-hat controller plugged into the [HI-HAT CONTROL] trigger input jack to simulate opening and closing of the hi-hat.
Setting Parameters using Menu Mode Advanced Techniques 3-2. Note Number c MIDI Settings Steps: Hold down the Mode switch [3] [2] Setting 3-1. Local Control Steps: Hold down the Mode switch [3] [1] Setting Setting Setting You can set the MIDI note number that is output when each of the pads is played. The Local Control parameter determines whether or not the drum module’s internal tone generator will produce sounds in response to playing of the pads or of songs.
Advanced Techniques Setting Parameters using Menu Mode 4. v Hi-hat Settings Enter a new splash sensitivity using the TEMPO[+]/[–] buttons. Setting 4-1. Clutch Position 0 to 127 Steps: Hold down the Mode switch [4] [1] Setting NOTE Set this parameter to [0] in order to turn off foot splashes. Setting 4-3. Foot Close Position Steps: Hold down the Mode switch [4] [3] Setting You can simulate the effect of changing the hi-hat’s clutch position.
Setting Parameters using Menu Mode 4-4. Foot Close Velocity 4-5. Kick Velocity Steps: Hold down the Mode switch [4] [4] Setting Steps: Hold down the Mode switch [4] [5] Setting Setting You can adjust the velocity (or power) of foot-close sounds produced using the hi-hat controller. This parameter only has an effect when you are using an HH40 Hi-hat Controller. 1. 2. Hold down the Mode switch to activate Menu Mode. 3. Press number button [4] to select the Foot Close Velocity parameter.
Advanced Techniques Setting Parameters using Menu Mode b Trigger Settings Velocity 11 12 13 5-1. Pad Velocity Curve 14 15 Steps: Hold down the Mode switch [5] [1] Setting Setting You can select a velocity curve for individual pads. A velocity curve determines how the velocity (or power) of a sound is affected by how hard you strike the pad. 1. 2. Hold down the Mode switch to activate Menu Mode. 3. Press number button [1] to select the Pad Velocity Curve parameter. 4. 5.
Advanced Techniques Setting Parameters using Menu Mode 5-2. Crosstalk 5-3. Snare Pad Type Steps: Hold down the Mode switch [5] [2] Setting Steps: Hold down the Mode switch [5] [3] Setting Setting The term “crosstalk” refers to the output of spurious trigger signals from a pad other than the one that was stuck as a result of vibration or interference between pads. You can adjust the Crosstalk parameter for individual pads to prevent this phenomenon from occurring. 1. 2.
Advanced Techniques Setting Parameters using Menu Mode 5-4. Pedal Type 5-5. Gain Steps: Hold down the Mode switch [5] [4] Setting Steps: Hold down the Mode switch [5] [5] Setting Setting Setting Use the following parameter to specify the types of pedals (i.e., hi-hat controller and kick) connected to your drum module. You can set the gain level for trigger signals output from individual pads. The higher the gain setting, the louder the sounds produced by light drumming. 1. 2.
Setting Parameters using Menu Mode Advanced Techniques 6-2. Difficulty Level n Training Settings Steps: Hold down the Mode switch [6] [2] Setting 6-1. Timer Steps: Hold down the Mode switch [6] [1] Setting Setting Setting You can set the level of training difficulty for the following exercises. You can set the practice time for the following exercises in Training Mode.
Advanced Techniques 4. Setting Parameters using Menu Mode Select the setting for each drum pad using the number buttons [1] to [5]. When set to producing a sound, the pad will produce a sound whenever they are struck. When set not to producing a sound, only pads played exactly in time will produce a sound. Number button 6-5.
Setting Parameters using Menu Mode 6-7. Fast Blast Timer Steps: Hold down the Mode switch [6] [7] Setting Setting Advanced Techniques m Other Settings 7-1. Voice Guidance Volume Steps: Hold down the Mode switch [7] [1] Setting Setting You can set the practice timer for Fast Blast (page 39). The timer begins counting at the start of an exercise, and when the set time is reached, it automatically ends the exercise. Hold down the Mode switch to activate Menu Mode. 1. 2.
Advanced Techniques Setting Parameters using Menu Mode 7-3. USB Audio Output Settings 7-5. Auto Power-Off Time Steps: Hold down the Mode switch [7] [3] Setting Steps: Hold down the Mode switch [7] [5] Setting Setting You can set whether the USB audio input is sent to the USB out or not. When set to “Output,” the audio data input from a PC (for example) is mixed with your pad performance and they are sent together to the USB out.
Setting Parameters using Menu Mode 5. 7-6. Stereo/Mono Steps: Hold down the Mode switch [7] [6] Setting Advanced Techniques Press the number button [7] to select Initialize Kit. • The number button [1] will light up. 6. Press the number button [1]. • The number button will start to flash. • If you do not wish to proceed with initialization, press Setting the Mode switch now to exit Menu Mode. 7. Press the number button [1]. • The kit will be initialized.
Advanced Techniques Setting Parameters using Menu Mode 7-9. Revert to Last Power On Steps: Hold down the Mode switch [7] [10] [1] [1] You can return all settings of drum kits, songs, and Menu Mode to the settings they had when you last turned on the drum module. You can return all settings of drum kits, songs, and Menu Mode to their default settings. NOTICE • When you reset settings as described below, any changes you have made to them since last turning on the drum module will be lost.
Advanced Techniques Integrating Separately Sold Accessories As described below, you can add various accessories* to your electronic drum kit for an even more enjoyable drumming experience. (*: Sold separately) Please note that these optional external pads were up-to-date as of printing of this manual. Details regarding any subsequently released models will be made available via the following web site. https://www.yamaha.
Advanced Techniques Connecting to a Computer Connecting the drum module to a computer or a smart device such as iPhone/iPad using a USB cable lets you send and receive audio or MIDI data. This section explains how to connect the drum module and the computer. NOTE USB cable is not included. USB terminal [USB TO HOST] terminal (bottom panel) Computer Drum module USB cable Press the [ (driver name)] button, download and open the file.
Reference Troubleshooting Reference Some problems may be solved by restoring the default settings (Factory Reset). If the following instructions do not work, we recommend the Factory Reset (See page 22). No sound is produced when a pad is struck, or the volume is lower than expected. Check connections as follows. • Ensure that the pads are properly connected to the drum module’s trigger input jacks.
Reference Troubleshooting Sounds or volumes are not as expected. If hi-hat splash sounds are not produced as expected, try the following. • Adjust the Splash Sensitivity parameter from Menu Mode. (See page 46) If it is difficult to produce closed hi-hat sounds with an HH65 Hi-hat Controller, try the following. • Adjust the Foot Close Position parameter from Menu Mode. (See page 46) If it is difficult to produce louder and quieter foot-closed hi-hat sounds, try the following.
Troubleshooting Reference Other common questions How do I make the drum module store it settings? • The drum module automatically stores its settings whenever you turn it off using the [ (See page 22) ] (Standby/On) button. How do I reset all of the drum module’s parameters to their default settings? • You can restore default settings using the Factory Reset function.
Reference Data List Music Category List Number 1 2 3 4 5 6 7 8 9 10 Music category Song description POP1 8-beat Pops POP2 16-beat Pops ROCK1 8-beat Rock Rock tune with a swung ROCK2 rhythm A heavy metal song using METAL two bass drums FUNK Up-tempo funk HIPHOP Modern Hip hop EDM Electronic dance music JAZZ 4-beat Jazz LATIN Salsa, a type of Latin music Kit description A versatile kit suitable for Pops. A kit that simulates gated-reverb drum sounds. A kit with powerful sounds suitable for rock music.
Data List Hi-Hat 153 Briliant14 154 Dark 14 155 Vintage 14 156 Bright 14 157 Jazz 14 158 R&B 1 159 R&B 2 160 Electro 1 161 Electro 2 162 Electro 3 163 Electro 4 164 T8 165 T9 166 HipHop 1 167 HipHop 2 168 DNB Percussion 169 Cajion Mt 170 Cajion Slp 171 Cajion Lo 172 Cajion Ft 173 PndeiroTap 174 PndeiroOp 175 PndeiroShk 176 PndeiroSld 177 Claves 178 Conga H Sw 179 Conga L Sw 180 BongoH Sw 181 BongoL Sw 182 Cowbell1Sw 183 Cowbell 2 184 Cowbell 3 185 Shaker Op 186 Shaker Cl 187 Timbales H 188 Timbales L 189
Reference Specifications Drum module Tone generator Metronome Type AWM2 Maximum polyphony 64 notes Voices Drum and percussion: 287 Keyboard: 128 Drum kits 10 (all of which may be edited and overwritten) Songs 10 Reverb 9 types Tempo 30 to 300 BPM (Tap Tempo and Voice Guidance functions) Beats 1/4 to 9/4 Jacks and terminals SNARE (mini stereo audio) TOM1 (mini mono audio) TOM2 (mini mono audio) TOM3 (mini mono audio) RIDE (mini mono audio) CRASH (mini stereo audio) HI-HAT (mini mono au
Reference Index Symbols G S [ ] connector................. 24 [ ] (metronome) button.................. 23 [ ] button ..................................23 [ ] (Standby/On) button ................. 23 [AUX IN] jack ...................................24 [DRUM ON/OFF] button .................. 23 [HI-HAT CTL] jack ...........................24 [KICK/PAD] jack ..............................24 [PHONES/OUTPUT] jack ................ 24 [TEMPO] buttons.............................23 [USB TO HOST] terminal ......
Information for users on collection and disposal of old equipment: This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your national legislation.
DTX402K DTX432K DTX452K Owner’s Manual 67
Drums Limited Warranty LIMITED WARRANTY ON YAMAHA DRUMS, HARDWARE AND ACCESSORY PRODUCTS Thank you for selecting a YAMAHA product. YAMAHA products are designed and manufactured to provide a high level of defect-free performance. Yamaha Corporation of America (“YAMAHA”) is proud of the experience and craftsmanship that goes into each and every YAMAHA product.
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. ITALY NORTH AMERICA Yamaha Music Europe GmbH, Branch Italy CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Toronto, Ontario M1S 3R1, Canada Tel: +1-416-298-1311 U.S.A.
Yamaha web site https://www.yamaha.com/ Yamaha Downloads https://download.yamaha.com/ Manual Development Group ©2018 Yamaha Corporation Published 11/2018 POMA*.