English Deutsch ELECTRONIC DRUM PAD Owner’s Manual Bedienungsanleitung Mode d’emploi Français XP100T XP100SD XP120T XP120SD EN DE FR 取扱説明書 ZH JA
01_xp120sd_en_c0.fm Page 2 Friday, November 12, 2010 8:10 PM English PRECAUTIONS Please read carefully before proceeding. The purpose of the precautions detailed below is to ensure that this product is used safely without fear either of accidental injury to you or other people or of damage to property. As a means, furthermore, of indicating the severity and immediacy of any risk of injury or damage associated with incorrect operation, these precautions are classified as either WARNING or CAUTION.
01_xp120sd_en_c0.fm Page 3 Friday, November 12, 2010 8:10 PM Package Contents To customers who purchased a Pads Set, please refer to the attached “Assembly Manual” included with the Pads Set when confirming package contents.
01_xp120sd_en_c0.fm Page 4 Friday, November 12, 2010 8:10 PM Pad-to-Input Matching Chart The function of the XP series pads varies according to which trigger input jack on the Drum Trigger Module the pad is connected. The chart below describes its function in relation to trigger input jacks.
01_xp120sd_en_c0.fm Page 5 Friday, November 12, 2010 8:10 PM Setting Up XP100T/100SD/120T After setting up your rack system (Yamaha RS series, etc.) or a standard tom stand (Yamaha WS series, etc.), attach the pad as shown in the illustration. Insert the tom holder (hexagonal bar) q on your rack or tom stand into the pad, and firmly tighten the clamp bolt w to secure. XP100SD/120SD Before set up, please prepare a snare stand e (Yamaha SS652, etc.
01_xp120sd_en_c0.fm Page 6 Friday, November 12, 2010 8:10 PM Pad Control Functions The pad controller used with the drum trigger module is compatible with pad control functions. The pad controller lets you adjust a variety of parameters (snares setting and tightness, tuning, etc.) by rotating the pad controller knob q (Please refer to the Owner’s Manual that came with your drum trigger module for more information.
01_xp120sd_en_c0.fm Page 7 Friday, November 12, 2010 8:10 PM Troubleshooting No Sound, Volume is Low Is the pad connected to the correct input number of the DTX Series Drum Trigger Module using the supplied stereo phone cable? (See “Pad-to-Input Matching Chart” above.) When a pad is connected with a mono phone cable, the voices assigned to the rim sections are not produced. Increase the output level using the level adjustment knob on the pad. (See “Output Level Adjustment” above.
05_xp120sd_ja_c0.fm Page 10 Monday, November 15, 2010 5:46 PM For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen Bestimmungsländern erhältlich.
Yamaha Electronic Drums web site: http://dtxdrums.yamaha.com Yamaha Manual Library http://www.yamaha.co.jp/manual/ U.R.G., Digital Musical Instruments Division © 2009-2011 Yamaha Corporation WS70070 012PO***.