Signal Processor Processeur de signaux audio Procesador de Señal Processador de sinal Сигнальный процессор ᄪख୲ۃධ ଊဵ౪Ꮳ 오디오프로세서 シグナルプロセッサー EN DE FR ES PT IT RU Setup Guide Installationsanleitung Manuel de configuration Manual de Instalación Guia de Configuração Guida alla configurazione Руководство по установке ZH-TW ົፑೌ ೪ۢࡿࠓ KO 설치 가이드 JA セットアップガイド ZH-CN
FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
PA_en_12 1/2 PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: Do not open • This product contains no user-serviceable parts.
PA_en_12 2/2 CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others. These precautions include, but are not limited to, the following: Power supply • When removing the electric plug from the product or an outlet, always hold the plug itself and not the cord. Pulling by the cord can damage it.
NOTICE Information To avoid the possibility of malfunction/damage to the product, damage to data, or damage to other property, follow the notices below. About functions/data bundled with the product Handling and maintenance • Do not connect this product to public Wi-Fi and/or Internet directly. Only connect this product to the Internet through a router with strong password-protections. Consult your router manufacturer for information on security best practices.
Introduction Thank you for purchasing a Yamaha DME7 signal processor. The product can process a wide range of audio signals. This Setup Guide describes basic instructions necessary for configuring settings during installation. To ensure the various product functionality can be utilized properly, be sure to read this Setup Guide before using the product. After reading the Setup Guide, keep it carefully stored.
Package contents (please verify) Setup guide (this manual) × 1 Euroblock connectors (16-pin, 3.50 mm pitch) × 2 Power cords × 2 Cable hook × 1 Manuals included • DME7 Setup Guide (this manual) Describes the setup procedure from connecting the power supply to setting up the system. • DME7 Reference Manual (HTML) Explains everything necessary for configuring settings and operating the system.
Installing Euroblock connectors 2. To disconnect Euroblock connectors, lower the left and right locks and pull out the connector. Use the provided Euroblock connectors to connect to [GPI] terminals. 3.5 mm 16-pin Euroblock Preparation and processing cable wires Strip the cable to be connected to the Euroblock connector as shown and connect the lead wires. Note that overlapping or vibration of wires connected to the Euroblock can cause lead wire breakage due to metal fatigue.
Installing the cable hook Main unit settings A cable hook is provided to prevent accidentally disconnecting the USB cable. The hook can be installed by the following procedure. Overview of front panel qw 1. Hook one end of the included cable hook onto the ert lower end of the security slot, located in the lower-left area of the rear panel. q [A/B] indicator This indicates whether [A]/[B] AC IN (power supply input) terminals are connected to power. It illuminates green when the power is ON.
Setting the Unit ID Setting the IP address If multiple DME7 units are used, make sure none of the Unit IDs conflict. This specifies the IP address for the port (DME control port) used to communicate with ProVisionaire Design. 1. On the [Menu] screen, rotate the main knob to select 1. On the [Menu] screen, rotate the main knob to select [Setting]. Then press the knob to apply the setting. [Setting]. Then press the knob to apply the setting. The [Unit ID] screen is displayed.
Muting or Unmuting 1. Press the [Fn] key to display the [Device Mute] screen. 2. Rotate the main knob to select [Yes] and then press it to apply the selection. The mute ON/OFF status can be confirmed based on the icons at the top of the [Home] screen. 3. Rotate the main knob to select the setting to initialize and then set only the setting that requires initialization to On. In addition to signal processing settings, the following settings are also initialized if set to On.
General specifications Dante Interface Channel count Sampling Frequency Bit Depth 64IN, 64OUT, Redundant (Extendable up to 256IN, 256OUT) 44.1/48/88.2/96 kHz 24/32 Bit USB Audio Channel count 8IN, 8OUT with SRC Sampling Frequency 44.1/48/88.2/96 kHz Connectors Dante DCP USB TO HOST USB TO DEVICE Network etherCON × 2 (PRIMARY / SECONDARY) 1000Base-T RJ45 USB 2.0 Type-C (USB Audio) USB 2.
Dimensions (English only) Dimensions/Abmessungen/Dimensions/Dimensiones/Dimensões/ Dimensioni/Размеры/尺寸/尺寸/치수/寸法図 (363) 3 2.
Apache License Version 2.0, January 2004 http://www.apache.org/licenses/ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION 1. Definitions. "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document. "Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.
BSD License GNU GENERAL PUBLIC LICENSE Copyright (c) The Regents of the University of California. All rights reserved. Version 2, June 1991 Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Copyright (C) 1989, 1991 Free Software Foundation, Inc.
age or distribution medium does not bring the other work under the scope of this License. 3.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision` (which makes passes at compilers) written by James Hacker. GNU GENERAL PUBLIC LICENSE Version 3, 29 June 2007 Copyright © 2007 Free Software Foundation, Inc.
used to produce the work, or an object code interpreter used to run it. The “Corresponding Source” for a work in object code form means all the source code needed to generate, install, and (for an executable work) run the object code and to modify the work, including scripts to control those activities.
rules and protocols for communication across the network. or stated as exceptions; the above requirements apply either way. Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is publicly documented (and with an implementation available to the public in source code form), and must require no special password or key for unpacking, reading or copying. 8. Termination. 7. Additional Terms.
Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law. 12. No Surrender of Others' Freedom. If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License.
GNU LESSER LICENSE GENERAL PUBLIC Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 021101301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library.
an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.
Library. You may convey such object code under terms of your choice, provided that, if the incorporated material is not limited to numerical parameters, data structure layouts and accessors, or small macros, inline functions and templates (ten or fewer lines in length), you do both of the following: * a) Give prominent notice with each copy of the object code that the Library is used in it and that the Library and its use are covered by this License.
Information for users on collection and disposal of old equipment: This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your national legislation.
Información para usuarios sobre la recogida y eliminación de los equipos antiguos Este símbolo en los productos, embalajes y documentos anexos significa que los productos eléctricos y electrónicos no deben mezclarse con los desperdicios domésticos normales. Para el tratamiento, recuperación y reciclaje apropiados de los productos antiguos, llévelos a puntos de reciclaje correspondientes, de acuerdo con la legislación nacional.
132
MEMO 133
MEMO 134
ADDRESS LIST NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Toronto, Ontario, M1S 3R1, Canada Tel: +1-416-298-1311 U.S.A. Yamaha Corporation of America 6600 Orangethorpe Avenue, Buena Park, CA 90620, U.S.A. Tel: +1-714-522-9011 CENTRAL & SOUTH AMERICA MEXICO Yamaha de México, S.A. de C.V. Av. Insurgentes Sur 1647 Piso 9, Col. San José Insurgentes, Delegación Benito Juárez, CDMX, C.P. 03900, México Tel: +52-55-5804-0600 BRAZIL Yamaha Musical do Brasil Ltda.
ѯᢋύဩॲӌԥ४ϵѨ ZBNBIB!NVTJD!'!FMFDUSPOJDT!UBJXBO!DP/-!MUE/ iuuqt;00ux/zbnbib/dpn ᖃϵѨ; )13*!8852.9999!ུіҀݗᐞୣሊݎၰ2ဵ3ዃ ࡋ݉ጤ; 191:.1:2499 雅马哈乐器音响(中国)投资有限公司 上海市静安区新闸路1818 号云和大厦2 楼 客户服务热线:4000517700 公司网址:https://www.yamaha.com.cn 制造商: 雅马哈株式会社 制造商地址: 日本静冈县滨松市中区中泽町10-1 Yamaha Pro Audio global website https://www.yamahaproaudio.com/ Yamaha Downloads https://download.yamaha.