User Manual
DME Satellite ES Series
DME8i-ES
DME8o-ES
DME4io-ES
Audio I/O Distribution and DSP Expansion Units
Extensive I/O and processing expansion for DME64N/DME24N systems and
EtherSound™ networks.
• Vastly expand the capabilities and capacity of a DME-based sound system, or any other networked audio devices that use
EtherSound™ protocol.
• Controllable remote I/O plus powerful DSP processing capability allow distributed processing for unprecedented system design
flexibility and power.
• Reduce system cabling costs while maximizing overall reliability.
• Also usable as stand-alone processors in smaller systems.
• Full 24-bit 96-kHz audio processing, plus the same highly-acclaimed analog circuitry used in the DME24N.
• Supplied DME Designer software application can be used to control, monitor, and create complete processing “configurations” in the
same way as with the DME64N or DME24N.
• 8-in/4-out GPI terminals allows direct, easy connection to wall-mountable CP4SF control panels featuring four switches and four
faders.
DME8i-ES Rear Panel
OPTIONS
REMOTE CONTROL PANELS
ICP1
Intelligent Control Panel
The most sophiscated of the DME series remotes,
the ICP1 connects via Ethernet. Funcons include
scene recall and six user-dened keys at the top and
boom of the LCD screen, which can be assigned to DME parameters
such as microphone and music source levels. Up to 4 sets of "pages" are
available - giving up to 24 parameters. LCD display shows names and
scenes and funcon keys in ve languages - English, German, French,
Spanish and Japanese.
CP4SF
Four
switches and
four faders
control panel
Wall-mountable remote control
panel for GPI control. Uses a
standard (US-type) 3 gang wall box.
CP4SW
Four switches
control panel
Wall-mountable
remote control
panel for GPI control. Uses
a standard (US-type) 1
gang wall box.
CP1SF
One switch
and one fader
control panel
Wall-mountable
remote control panel
for GPI control. Uses a
standard (US-type) 1 gang
wall box.