q READ THIS MANUAL CAREFULLY! It contains important safety information.
DESCRIPTION 1 1.
E-BIKE SYSTEMS The e-Bike Systems are designed to give you the optimal amount of power assist. It assists you within a standard range based on factors such as your pedaling strength, bicycle speed, and current gear. The e-Bike Systems do not operate in the following situations: • When the display unit’s power is off. • When you are moving 25 km/h or faster. • When you are not pedaling. • When there is no residual battery capacity. • When the automatic power off function* is operating.
E-BIKE SYSTEMS Power assist chart Assist power High High-Performance mode Standard mode Power-saving Eco mode Starting off Level road High-Performance mode A mode that can be counted on to provide powerful assist at all times. Inclined road Standard mode The recommended mode, balancing assist power and remaining assist distance. Steep incline Low Eco mode A mode for saving assist power to travel longer remaining assist distances. • This illustration is for reference purposes only.
INSTRUMENT AND CONTROL FUNCTIONS Display unit (LED type) Function display (Battery capacity indicator/ range meter/speedometer) Residual battery capacity lamp Remaining assist distance lamp Assist mode switch (up) Function select switch Bicycle speed lamp Assist mode switch (down) Power switch Assist mode lamp Light switch Light lamp
INSTRUMENT AND CONTROL FUNCTIONS Display unit (LED type) The display unit (LED type) offers the following operations and information displays. 2 Power “On/Off” Power switch Each time you press the power switch, the power switches between “On” and “Off”. When the power turns on, all the lamps on the display unit light up for approximately 2 seconds and then turn off again.
INSTRUMENT AND CONTROL FUNCTIONS 2 Displaying and switching the battery capacity indicator, range meter, speedometer Function display (Battery capacity indicator/ range meter/speedometer) Remaining assist distance lamp Residual battery capacity lamp Bicycle speed lamp Function select switch You can display either the battery capacity indicator, range meter or speedometer.
INSTRUMENT AND CONTROL FUNCTIONS Error display Assist mode lamp Residual battery capacity lamp Remaining assist distance lamp Bicycle speed lamp 2 Display of faults detected by diagnosis mode The e-Bike Systems are equipped with a diagnosis mode.
CHECKING THE RESIDUAL BATTERY CAPACITY You can check the estimate of how much capacity is left in the battery and to what extent it is charged. The check can be performed using either the display unit’s residual battery capacity indicator or the battery’s residual battery capacity indicator lamps. TIP • Even if the battery’s capacity reaches 0 (zero), you can still ride the bicycle as a regular bicycle.
TROUBLESHOOTING E-Bike Systems Symptom Check The assist mode lamps, residual battery capacity lamp, remaining assist distance lamp are flashing in an alternating pattern (at intervals of roughly 0.2 seconds). Or, the assist mode indicator and battery capacity indicator are flashing in an alternating pattern (at intervals of 0.5 seconds). The display unit shuts down immediately (approx. 4 seconds later) after switching the power on. Traveling range has decreased. The assist mode lamps are flashing.
