(YSP-CU2200 + NS-SWP600) Digital Sound Projector™ OWNER’S MANUAL English
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this unit in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. For proper ventilation, allow the following minimum clearances.
■ For U.K. customers ■ Notes on remote controls and batteries If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below. • Do not spill water or other liquids on the remote control. • Do not drop the remote control.
What you can do with this unit PREPARATION To enjoy Blu-ray movies To enjoy TV To enjoy games Checking supplied accessories (p. 4) Installation (p. 9) Preparing the remote control (p. 13) CONNECTION/ INITIAL SETTINGS Connecting your TV and Blu-ray disc player (p. 14) When enjoying STB program such as on satellite/CATV tuner (p. 15) Connecting a game console (p. 15) Setting the best possible sound automatically (p. 17) Operating the unit by TV’s remote control (p.
Contents Getting started ....................................................... 4 Supplied accessories .................................................... 4 Controls and functions.......................................... 5 CONNECTION/INITIAL SETTINGS Remote control preparation......................................... 13 Subwoofer connection................................................. 13 Pairing ................................................................................ 35 Connecting ........
PREPARATION Getting started Supplied accessories Before connecting, make sure you have received all of the following items.1) Units Center unit (YSP-CU2200) Subwoofer (NS-SWP600) Accessories Remote control IntelliBeam microphone (6 m (19.7 ft)) Non-skid pad for center unit (×4) 1) Battery (× 2) (AA, R6, UM-3) Optical cable (1.5 m (4.9 ft)) Cardboard microphone stand Quick Reference Guide y According to the connection, the supplied cables may not be needed. 4 En IR Flasher (1 m (3.
Controls and functions PREPARATION Controls and functions Front panel 23 1 7 45 6 8 9 CONNECTION/ INITIAL SETTINGS 4 INTELLIBEAM jack Shows information about the operational status of this unit. (☞p. 7) Connect the supplied IntelliBeam microphone for AUTO SETUP (☞p. 17). 2 SURROUND indicator 5 Remote control sensor Lights up according to the input signal. Receives infrared signals from the remote control. (☞p.
Controls and functions Rear panel 1 2 3 4 5 6 7 8 9 0 A 1 AUDIO INPUT 3 jack 6 OPTICAL digital input 1 jack For connecting analog cable to the external components. (☞p. 15) For connecting optical cable to the external components. (☞p. 15) 2 DOCK terminal 7 OPTICAL digital input TV jack For connecting optional Yamaha Universal Dock for iPod, Wireless System for iPod/iPhone, and Bluetooth Wireless Audio Receiver. (☞p. 33, 35) For connecting optical cable to the TV. (☞p.
Controls and functions PREPARATION Front panel display 1 2 3 4 CONNECTION/ INITIAL SETTINGS 5 4 VOL indicator Lights up when HDMI signal is input. Indicates the current volume level. (☞p. 26) 2 SLEEP indicator 5 Multi information display Lights up when the sleep timer is set. (☞p. 32) Displays information in alpha-numeric values. Displays playback components and current sound output when power is on. 3 CINEMA DSP indicator Lights up when a sound field program is selected (☞p. 28).
Controls and functions Remote control Infrared signal transmitter CINEMA DSP program keys When playback is in surround sound, select the CINEMA DSP programs (☞p. 28). SURROUND key Switches to surround playback. (☞p. 28) STEREO key Switches to stereo playback. (☞p. 27) Input selector keys Select playback component. (☞p. 26) INFO key Switches the information display on the front panel as follows.
CONNECTION/INITIAL SETTINGS Installation and Connection Notes on installation • • • • Make sure you leave an adequate amount of ventilation space so that heat can escape. Be sure to install this unit where it will not fall subject to vibrations, such as from an earthquake, and where it is out of the reach of children. When using a cathode-ray tube (CRT) TV, do not install this unit directly above your TV.
Installation and Connection ■ Adjust the height of center unit In case that the center unit straddles the stands of your TV, turning the stands to left makes the unit higher. Confirm the graduation of each stand to make each stand the same height. Adjust the graduation in the range from 0 to 10. ■ When the center unit hides the remote control sensor of your TV The unit receives the signal from the remote control of your TV in front, and transmits to your TV by IR Flasher (supplied).
Installation and Connection PREPARATION Installing this unit This unit outputs sound beam as shown in the illustrations below. Install this unit where there are no obstacles such as furniture obstructing the path of sound beams. Otherwise, the desired surround sound effects may not be achieved. You may install this unit in parallel with the wall or in the corner. Parallel installation Install this unit in the exact center of the wall when it is measured from the left and right corners.
Installation and Connection Installing in a non-square room Install this unit so that the sound beams can be reflected off the walls. Example for installing the unit in living room • As surround beams normally pass through tables, tables are not obstacles. And a cupboard installed facing the wall reflects sounds. • In a case of the listening room as right illustration, adjusting the position of right channel after auto setup enables to achieve more desired surround sound effects. (☞p.
Installation and Connection Before installing batteries or using the remote control, make sure that you read precautions on the remote control and batteries in “CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.” Installing the batteries PREPARATION Remote control preparation Operation range Press U Within 6 m (20 ft) PLAYBACK Remove the transparent sheet before using.
Connections • Do not connect the power cable until all connections are completed. • Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug and/or terminal. TV and Blu-ray disc player connection For the cable connection, follow the orders below. 1 2 HDMI cable (optional) Input the digital audio/ video signals of the Bluray disc player to this unit. 3 HDMI cable (optional) The digital video of the Blu-ray disc is reflected on TV.
Connections PREPARATION Game console or tuner connection Additional external device (example) Connecting cable HDMI cable (optional) 2 Satellite/cable TV (HDMI supported) HDMI cable (optional) 3 Satellite/cable TV (HDMI not supported) Digital audio pin cable (supplied) 4) 4 HDMI not supported game console Analog audio stereo pin cable (optional) 4) Video signals Audio signals PLAYBACK 3) SETTINGS (Example) ANALOG OUTPUT 3 CONNECTION/ INITIAL SETTINGS 1 HDMI supported game console COAXIAL OU
Initial settings Selecting language for menu display 1 2 Turn the unit and your TV on. Switch TV’s input to “VIDEO INPUT 1 (example)”. YSP-2200 Push [SETUP] to begin SETUP MENU. (example) 3 Check whether the initial screen is displayed. 1) Press and hold SETUP key until the “LANGUAGE SETUP” menu appears on your TV. 3)LANGUAGE SETUP [ ]/[ ]:Sel 4 [ENTER]:Return Press U / V key to select the desired language and then press ENTER key.
Initial settings IntelliBeam microphone Upper limit Center height of this unit Within 1 m (3.3 ft) Within 1 m (3.3 ft) Cardboard microphone stand 1.8 m (6.0 ft) or more Listening position Lower limit PLAYBACK Notes Center line Installing the IntelliBeam microphone Cardboard microphone stand 2 Check if a video pin cable is connected.
Initial settings Using AUTO SETUP (IntelliBeam) Notes • It is normal for loud test tones to be output during the AUTO SETUP procedure. Make sure that there are no children around in the listening room while the AUTO SETUP procedure is in progress. • Make sure that your listening room is as quiet as possible. For accurate measurement, turn off air conditioner or other devices that make noises. • If there are curtains in your listening room, we recommend following the procedure below.
Initial settings 5 Press ENTER key to confirm the results. 5) The measurement result is saved. AUTO SETUP (PREPARATION & CHECK) AUTO SETUP COMPLETE Please connect the MIC. Please place the MIC at least 1.8m/6ft away from SoundProjector. The MIC should be set at ear level when seated. Measurement takes about 3min. After [ENTER] is pressed, please leave the room. [ENTER]:Start [RETURN]:Cancel 6 Remove the IntelliBeam microphone. Initial screen appears.
Initial settings ■ AUTO SETUP via setup menu 1 2 3 4 Place the IntelliBeam microphone and press SETUP key. Press U / V to select “AUTO SETUP” and then press ENTER key. Press U/ V to select one of the items below and then press ENTER key. Select Item: “BEAM+SOUND OPTIMIZE” (Beam optimization and sound optimization) It is recommended that you should select this optimization feature, if you make settings for the first time. This menu takes about three minutes.
Initial settings ERROR E-1: Please test in quieter environment. ERROR E-6: Volume level is lower than expected. Please check MIC position/connection and re-try. Cause Remedy The IntelliBeam microphone cannot collect the sound produced by this unit because the sound output level is too low. Make sure that the IntelliBeam microphone is firmly connected to this unit and placed in a proper location. If the problem persists, contact the nearest authorized Yamaha service center for assistance.
Initial settings Saving several measurement results (Memory setting function) You can save the current beam and sound settings in the system memory of this unit. It is handy to save certain settings according to the varying conditions of your listening environment. For example, if there are curtains in the path of sound beams, the effectiveness of the sound beams will vary depending on whether the curtains are open or closed.
Initial settings SETUP key. Select “MEMORY” and press key. ENTER Press U/ V key to select “LOAD” and press ENTER key. Press U/ V key to select the memory number to be loaded and then press ENTER key. Selectable item: Memory 1, Memory 2, Memory 3 “Memory 1 Load Now ?” is displayed when the memory number is selected. Press ENTER key. PLAYBACK 5 Press CONNECTION/ INITIAL SETTINGS 1 2 3 4 PREPARATION ■ Loading settings “Memory 1 Loading…” is displayed and the setting is loaded.
Initial settings Operating the unit by TV’s remote control What is the HDMI control function? You can use the TV remote control to operate this unit if your TV supports the HDMI control function (ex. REGZA Link) and is connected to this unit’s HDMI OUT (ARC) jack. 1) Remote control of TV (Example) Power on/off Switches input This unit automatically selects the input according to the input source setting on the TV. Switching input on TV menu (ex.
Initial settings 1 2 Turn on all components connected to this unit with HDMI. Check all components connected with HDMI and enable the HDMI control function on each component. For this unit, set “HDMI CONTROL” to “ON” (☞p. 43). 2) For external components, refer to the manual supplied with each component. 3) Turn off the TV and then turn on it again. Registering HDMI components to TV 4) 3 Select this unit as the input source of the TV.
PLAYBACK Playback features Basic operation for playback 1 2 3 Press key to turn on this unit. Turn on components (TV, Blu-ray disc player, game console, etc.) connected to this unit. Select a component you want to listen to by pressing the input selector key ( , , ) corresponding to the connection of external components. For example, when playing back a Blu-ray disc player connected to HDMI IN 1 jack, select HDMI1 by pressing input selector key as shown below.
Playback features Switching stereo/surround sound When playback is in stereo sound. STEREO key to switch to stereo When playback is in surround sound. Press mode. While watching the TV, compensate the excessive volume differences to make it easier to hear during the following cases. • When switching the channel • When a TV program changed to commercial • When one program is finished and another program started Press UNIVOLUME key to turn the function on/off.
Playback features Enjoying realistic surround sound (CINEMA DSP) Playback surround sounds using Yamaha’s exclusive CINEMA DSP. 1) 1 2 Press SURROUND key to switch to surround mode. Press the desired repeatedly. 2) 3) CINEMA DSP key The CINEMA DSP category name appears in the front panel display and the CINEMA DSP indicator (☞p. 7) lights up.
Playback features OFF (DSP Off) Sur.Decorder (surround decorder) This program plays back surround sound without CINEMA DISP sound field effect. Concert Hall This program creates a rich surround effect of a large round concert hall with a great deal of presence, emphasizing the extension of sounds, and lets you feel as if you are seated close to the center of the stage.
Playback features ■ Selectable item for “Sur. (surround)” Beam modes for “5.1ch” For enjoying surround sound effects on the movie, etc. to the fullest For watching live recordings on a Blue-ray disc 5 Beam (5 Beam) Outputs sound beams from the front right and left, center, and surround right and left channels. St+3Beam (Stereo+3Beam) Outputs normal sound from the front right and left channels and sound beams from the center and surround right and left channels.
Playback features PREPARATION Surround decoder setting When this unit plays back 2-channel or 5.1-channel sources in surround mode, surround decoder enables them playback for 7.1channel. 1) You can enjoy a variety of surround sound effects by switching the decoder. 2) CONNECTION/ INITIAL SETTINGS Select and set “Sur.Dec.Mode” in the option menu. Refer to “Configuring settings for each input source (Option menu)” on page 33 for the operation of option menu.
Playback features Using useful features Sleep timer/auto power down function Use this feature to automatically set this unit to the standby mode after a specified period of time. Press SLEEP key repeatedly. Switching the time it takes to switch to standby mode. The SLEEP indicator (☞p. 7) flashes in the front panel display. The SLEEP indicator in the front panel display lights up and the sleep timer is set. 1) Selectable item: Sleep 120 min., Sleep 90 min., Sleep 60 min., Sleep 30 min.
Playback features Input source Menu items HDMI1-3 Volume Trim, Decoder Mode, Sur. Dec. Mode, Signal Info TV ■ Displaying the input signal information (Signal Info) U/ Press Digital audio format Channel The number of channels included in input signal (front/surround/LFE (low frequency sound effects)) Display example: [3/2/0.1] Front 3ch, Surround 2ch, LFE for input signal 4) Volume Trim, Sur. Dec.
Playback features When using Yamaha Universal Dock for iPod (optional YDS-12, etc.) 1) After setting the iPod/iPhone to the dock, you can use the remote control of this unit for playback operations. You can also display iPod/iPhone video on the TV. : Controls iPod’s menu. : Controls click wheel.
Playback features Play back music stored in the Bluetooth components (portable audio players, Bluetooth-enabled computers, etc.) connected to the Bluetooth Wireless Audio Receiver (optional YBA-10). Pairing 4 DOCK key to set the input to Turn on the Bluetooth component you want to pair with, and then enter pairing state. 5) Press 1 2 3 4 OPTION key. Press DOCK. DOCK key to set the input to Press OPTION key. Select “Connect” and press key.
SETTINGS Setup menu Setting procedure Before performing following procedures, check if this unit and TV are connected with the video pin cable (supplied) and switch TV input to “VIDEO INPUT 1 (example)”. 1 Press SETUP key to enter the setup 1) menu. SET MENU MEMORY AUTO SETUP MANUAL SETUP SOUND SETUP INPUT MENU DISPLAY MENU [ ]/[ ]:Up/Down [ENTER]:Enter 2 Select menu by pressing and press ENTER key. U/ V key Repeat these step to display desired menu.
Setup menu Category MEMORY Menu LOAD SAVE AUTO SETUP BEAM ADJUSTMENT IMAGE LOCATION TONE CONTROL TREBLE, BASS SUBWOOFER AUDIO DELAY LFE LEVEL, DISTANCE AUTO LIP SYNC SOUND OUT INPUT MENU INPUT RENAME HDMI SETUP DISPLAY MENU F. DISPLAY SETUP OSD SETUP UNIT SETUP ☞p. 20 Optimizes the sound settings automatically. ☞p. 20 Adjusts the listening room and listening position settings. ☞p. 20 ☞p. 38 Adjusts the various sound beam settings. ☞p.
Setup menu When this unit is installed at the corner of the room, specify the width of length of the listening room. Manual setup Use this menu to manually adjust the parameters related to the sound beam output. To fine-adjust parameters configured by AUTO SETUP, use “BEAM ADJUSTMENT” and “IMAGE LOCATION”. Setting parameters MANUAL SETUP SETTING PARAMETERS Use to set the position of this unit in your listening room and the distance of this unit from the listening position.
Setup menu MANUAL SETUP BEAM ADJUSTMENT Use to manually adjust the various sound beam settings. 4) 1 3 Configure “FOCAL LENGTH”. 6) Configure “HORIZONTAL ANGLE”. Adjust the horizontal angle of sound beams for each channel using test tones. Adjust toward L (left) to move the direction of the output to the left and adjust toward R (right) to move it to the right.
Setup menu Image location Tone control MANUAL SETUP IMAGE LOCATION Use to adjust the direction from which the front left and right channel sound is heard so that each sound can be heard closer to the center channel. Use this feature to redirect audio signals if the sound coming from the front left and right channels seems unnatural. You can adjust this parameter only when “5BeamPlus2”, “5 Beam” or “3 Beam” is selected in “Surround mode” (☞p. 29). Select “ON” to configure the sound direction.
Setup menu Dynamic range control Input level On Off Sub menu: Front L, Front R, Center, Surround L, Surround R, Subwoofer Adjustable range: -10.0 dB to +10.0 dB Sound out setting Sound beam output configuration SOUND SETUP SOUND OUT Sub menu: CHANNEL OUT, SURROUND Use to configure the number of output channels (5.1ch/7.1ch/ Auto) or audio output method. For details, see “Changing the audio output method for surround playback” (☞p. 29).
Setup menu Input assignment Input assignment INPUT MENU INPUT ASSIGNMENT1) Use to change the key assignments of input jacks on this unit. The sound of the input select is decided according to key assign set to each jacks.
Setup menu INPUT MENU INPUT RENAME Use to change the name of the input source displayed when the input source is selected. Select a name from templates, or enter an original name. ■ Selecting a name from templates Press name. Y/Z key to select a input source Selectable item: Blu-ray, DVD, DVR, CATV, Satellite, Game To exit the menu, press RETURN key. ■ Entering an original name 3 Press ENTER key. “T” appears above the new name display to indicate the position to be entered.
Setup menu DISPLAY MENU ■ Front panel display setup DISPLAY MENU F.DISPLAY SETUP Use to adjust the brightness and display settings of the front panel display. Sub menu: STANDARD DIMMER Use to adjust the brightness of the front panel display when you operate this unit. The front panel display dims as the number becomes small.
Advanced setup “ADVANCED SETUP” appears in the front panel display. 5 6 Release INPUT key on the front panel. Menu Press U/ V to select the desired menu on the front panel display and then press ENTER key. 1) Change setting by pressing Y/Z key. 2) Press key to set this unit to the standby mode. The new setting will be reflected when you turn on the unit by pressing key.
TROUBLESHOOTING Troubleshooting Troubleshooting Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the AC power supply cable, and contact the nearest authorized Yamaha dealer or service center. General Problem Cause Remedy See page This unit does not operate properly.
Troubleshooting Cause Remedy See page No sound from the subwoofer. The subwoofer is not connected properly. Check if the subwoofer is connected properly. 13 The level of subwoofer is low. Increase the subwoofer level with SUBWOOFER + key. 26 The image is not displayed on TV screen. HDMI cable is not securely connected. Connect them with an HDMI connection or a digital connection. Menu screen of this unit is not displayed. VIDEO OUTPUT jacks of this unit and TV are not connected.
Troubleshooting iPod/iPhone Note If the problem occur other than the following message displayed on the display, check the connection of your iPod/iPhone. Message Connect error Features iPod/iPhone has a problem with communication. Low Battery The battery of iPod/iPhone is running low. Unknown iPod The iPod/iPhone being used is not supported by this unit. Connected iPod/iPhone is correctly connected to the Yamaha Universal Dock for iPod.
Troubleshooting Note If the problem occur other than the following message displayed on the display, check the connection of your Bluetooth component. Message Searching... Features Remedy See page (When pairing) – The pairing should be performed for this unit and the Bluetooth component at the same time. Make sure that the Bluetooth component is also a pairing mode. (When Connected) – Make sure that the power of the Bluetooth component is on.
APPENDIX Glossary Glossary Digital Sound Projector Sampling frequency Ordinarily, two front speakers, a center speaker, two surround speakers, and a subwoofer are necessary for enjoying 5.1 channel surround sound. Typical 5.1 channel speaker system The number of sampling (process for digitalizing analog signals) per second. In principle, the higher the sampling rate, the wider the frequency range that can be played back, and the higher the quantized bit rate, the finer the sound that can be reproduced.
Glossary Dolby Pro Logic IIx is a new technology enabling discrete multichannel playback from 2-channel or multi-channel sources. There are three modes available: “Music mode” for music sources, “Movie mode” for movie sources (for 2-channel sources only) and “Game mode” for game sources. Deep Color Linear PCM is a signal format under which an analog audio signal is digitized, recorded, and transmitted without using any compression. This is used as a method of recording CDs and DVD audio.
Specifications Specifications Amplifier section • Rated Output Power Woofer (100 Hz, 0.9% THD, 3 Ω)................................................... 70 W Tweeter (1 kHz, 0.9% THD, 4 Ω).............................................. 1.7 W/ch • Maximum Output Power Woofer (100 Hz, 10% THD, 3 Ω).................................................. 100 W Tweeter (1 kHz, 10% THD, 4 Ω).................................................. 2 W/ch Speaker section • Speaker Type YSP-CU2200....................
Specifications PREPARATION Available signal information HDMI signal compatibility ■ Receivable audio signals Audio signal formats Compatible media 2ch Linear PCM 2ch, 32-192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio, etc. Multi-ch Linear PCM 8ch, 32-192 kHz, 16/20/24 bit DVD-Audio, Blu-ray disc, HD DVD, etc. Bitstream (SD Audio) Dolby Digital, Dolby Digital EX, DTS, DTSES DVD-Video, etc.
Using the supplied demonstration DVD By playing back the supplied demonstration DVD, you can check the digital signals being input properly from the Blu-ray disc player through the digital connection (HDMI, optical, or coaxial) and experience this unit’s multi-channel surround sound. Playing back the demonstration DVD 1 2 3 4 5 6 Select input sources both on this unit and your TV so that audio signal of DVD is input to this unit and video signal is input to your TV.
Index A C F F.DISPLAY SETUP .................................................... 44 FOCAL LENGTH........................................................ 39 Front panel ...................................................................... 5 Front panel display.......................................................... 7 G Game console ............................................................... 26 H HD audio signals .......................................................... HDMI ....................
Index Sweet spot ..................................................................... 39 System indicator ............................................................. 5 M MEMORY .................................................................... Movie............................................................................ MP3 .............................................................................. Music ............................................................................ My Sur. .....
YD002A0/OMEN