CGP-1000 O W N E R ’S M A N U A L EN
SPECIAL MESSAGE SECTION PRODUCT SAFETY MARKINGS: Yamaha electronic products may have either labels similar to the graphics shown below or molded/stamped facsimiles of these graphics on the enclosure. The explanation of these graphics appears on this page. Please observe all cautions indicated on this page and those indicated in the safety instruction section. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK).
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: Power supply/Power cord Water warning • Only use the voltage specified as correct for the instrument.
Connections Using the bench (If included) • Before connecting the instrument to other electronic components, turn off the power for all components. Before turning the power on or off for all components, set all volume levels to minimum. Also, be sure to set the volumes of all components at their minimum levels and gradually raise the volume controls while playing the instrument to set the desired listening level.
Thank you for purchasing this Yamaha Clavinova! We recommend that you read this manual carefully so that you can fully take advantage of the advanced and convenient functions of the instrument. We also recommend that you keep this manual in a safe and handy place for future reference. About this Owner’s Manual and Data List This manual consists of the following sections. Owner’s Manual Introduction (page 10).......................... Please read this section first. Quick Guide (page 23)...................
Accessories Guide to Yamaha Online Member Product User Registration “50 greats for the Piano” Music Book Owner’s Manual Data List The following items may be included or optional, depending on your locale: Bench ■ Tuning Unlike an acoustic piano, the instrument does not need to be tuned. It always stays perfectly in tune. ■ Transporting If you move to another location, you can transport the instrument along with other belongings.
Table of Contents Introduction Enhanced Realism and Natural Expressiveness ................................................. 10 Panel Controls ................................................. 12 Playing the Keyboard ...................................... 14 Setting Up ....................................................... 16 Music Rest ................................................... 16 Lid ............................................................... 16 Using Headphones .............................
Adding Effects to Voices Played on the Keyboard ......................................................... 86 Using a Microphone .......................167 Editing the Volume and Tonal Balance (MIXING CONSOLE) ....................................... 88 Adjusting the Microphone and Harmony Sound ............................................................ 170 Basic Procedure .................................................... 88 Voice Creating (Voice Set) ..............................
MIDI Settings ................................................ 200 Appendix Introduction Using Your Instrument with Other Devices Basic Operation .................................................. 200 Pre-Programmed MIDI Templates ...................... 201 MIDI System Settings ......................................... 202 MIDI Transmit Settings ....................................... 202 MIDI Receive Settings .........................................
Enhanced Realism and Natural Expressiveness Authentic Acoustic Piano-like Touch Introduction NW (Natural Wood) with Synthetic ivory keytops The CGP-1000 is one of a new breed of instruments that features a keyboard with the feel of real ivory. The special Natural Wood keyboard of the CGP-1000 uses real-wood white keys. The key surface is soft and slightly porous, giving the keys added grip and a natural friction that lets you play easily.
Playing the Instrument Introduction Playing Piano Voices ................................................................ page 28 With just the press of a button, you can reconfigure the entire instrument for optimum piano performance, no matter what settings you’ve made from the panel. Now you can enjoy performing and practicing with authentic grand piano sounds and response—instantly. Playing Other Instrument Voices ..............................................
Introduction Panel Controls 1 [POWER] switch .............................................................. P. 14 Q [EXIT] button.................................................................... P. 26 2 [USB TO DEVICE] Terminal.............................................. P. 22 R [DATA ENTRY] dial .......................................................... P. 67 3 [MASTER VOLUME] dial.................................................. P. 15 S [ENTER] button .........................................
Introduction CGP-1000 VOICE CONTROL l VOICE category selection buttons .................................... P. 32 m [VOICE EFFECT] button ................................................... P. 86 ONE TOUCH SETTING n [1]–[4] buttons ................................................................. P. 50 o [OTS LINK] button ........................................................... P. 51 p Drum Kit icons................ Data List (Drum/key Assignment List) Pedals q Left pedal...............................
Playing the Keyboard Connecting the power cable First insert the plug of the power cable into the AC connector on the Clavinova, then plug the other end of the cable into the proper AC outlet on the wall. Introduction 1 (The shape of the plug and outlet differ depending on locale.) 2 Opening the key cover Using the hand grip on the front, lift open the key cover. If you want to play in this condition (with the panel unopened), go on to step 4.
5 Playing the keyboard Play the keyboard to produce sound. Introduction Adjusting the volume While playing the keyboard, adjust the volume level by using the [MASTER VOLUME] located at the left of the panel. 6 7 Turning the power off Press the [POWER] switch to turn the power off. The screen and the power indicator turn off. Closing the panel Grip the rim at the top of the panel, and pull the key cover down to close it. CAUTION Be careful to avoid catching your fingers when closing the cover.
Setting Up Music Rest To Raise the Music Rest: Introduction 1 Gently open the front portion of lid. 2 Pull the music rest up and toward yourself until it goes at your favorite angle. 3 Gently lower the music rest so that it rests at the angle. To Lower the Music Rest: 1 Pull the music rest toward yourself as far as it will go. 2 While pulling the support and gently lowering the music rest backward until it is all the way down. CAUTION Be careful to avoid catching your fingers.
Using Headphones For the longer stay, use the inner recess, and for the shorter stay, use the outer recess to support the lid. Introduction Longer stay CAUTION Do not use the outer recess for the longer stay; doing so could make the lid unstable and may cause it to fall, resulting in damage or injury. Shorter stay CAUTION ■ To close the lid: 1 1 Hold the lid stay and carefully raise the lid. 3 2 Hold the lid in its raised position and lower the lid stay. 3 Carefully lower the lid.
Changing the Display Language Changing the Display Language This determines the language used in the display for messages, file names, and character input. Introduction 1 2 Call up the operation display. [FUNCTION] → [J] UTILITY → TAB[√][®] OWNER Press the [4π†]/[5π†] button to select a language. To return to the original display, press the [EXIT] button.
Display Settings Adjusting the Brightness of the Display Adjust the brightness of the display. 2 Call up the operation display. [FUNCTION] → [J] UTILITY → TAB[√][®] CONFIG 2 Introduction 1 Press the [2π†] button to adjust the brightness of the display. Selecting a Picture for the Main Display Background This function lets you select your favorite picture to be used as background for the Main display (page 25). 1 2 3 Call up the operation display.
Display Settings After selecting, press the [DIRECT ACCESS] button then press the [EXIT] button to return to the Main display. The newly selected picture is shown as the background of the Main display. Introduction The explanation about picture compatibility at right applies also to the background of the Song Lyrics display.
Handling the Floppy Disk Drive (FDD) and Floppy Disks (The floppy disk drive is optional. For instructions on installing the floppy disk drive, see page 213.) Cleaning the Disk Drive Read/Write Head Formatting a Floppy Disk About Floppy Disks • If you find that you are unable to use new, blank disks or old disks that have been used with other devices, you may need to format them. For details on how to format a disk, see page 68. Keep in mind that all data on the disk will be lost after formatting.
Handling the USB Storage Device (USB Flash Memory/Floppy Disk, etc) This instrument features a built-in [USB TO DEVICE] terminal. By connecting the instrument to a USB storage device with a standard USB cable, you can save data you’ve created to the connected device, as well as read data from the connected device. Be sure to handle USB storage device with care. Follow the important precautions below.
Quick Guide Playing the Demos The Demos are more than just songs—they also provide helpful, easy-to-understand introductions to the features, functions and operations of the instrument. In a way, the Demos are an interactive “mini-manual”—complete with sound demonstrations and text showing what it can do for you. Quick Guide 1 Select the desired Language. 1 Call up the operation display. [FUNCTION] → [J]UTILITY → TAB[√][®] OWNER 2 2 Press the [4π†]/[5π†] buttons to select the desired language.
Quick Guide Showing Specific Demo Topics 1 π†]/[8π π†] buttons in the Demo display to call up the specific Demo menu. Press the [7π 2 Press one of the [A]–[I] buttons to show a specific Demo. To return back to the previous display, press the [J] button. When the Demo has more than one screen. Press a [π†] button corresponding to the screen number. 3 24 Press the [EXIT] button to exit from Demo.
Operations in the Basic Displays To start with, you should know a little about the basic displays that appear in the Quick Guide. There are three basic displays: Main display ➤ See below. File selection display ➤ page 26 Function display ➤ page 27 Quick Guide Operation of the Main Display The Main display shows the basic settings and important information for the instrument (It is the same display that appears when the instrument is turned on.).
Operation of the File Selection Display In the File Selection display, you can select the Voice (page 28)/Song (page 35)/Style (page 44), etc. In the example here, we’ll call up and use the Song Selection display. Quick Guide 2 1 3, 5 3, 5 4 1 Press the [SONG SELECT] button to call up the Song Selection display. 2 Press the TAB [√][®] buttons to select the desired drive (PRESET/USER/USB). About PRESET/USER/USB PRESET ..............
Operation of the Function Display In the Function display, you can make detailed settings. In the example here, we’ll call up and use the keyboard touch sensitivity setting display. 1 Press the [FUNCTION] button. Categories of detailed settings are shown. Quick Guide 2 Press the [D] button to select the category CONTROLLER. When the selected category is further divided into sub-categories, the tab(s) will be shown in the display. 3 Press the TAB [®] button to select the KEYBOARD/PANEL tab.
4 Press the [A] button to select the “1 INITIAL TOUCH.” Quick Guide 4 5 5 Press the [1π†]/[2π†] button to select touch sensitivity for the keyboard. For details on the touch sensitivity settings, see page 29. Throughout this manual, arrows are used in the instructions, indicating in shorthand the process of calling up certain displays and functions. For example, the instructions above can be indicated in shorthand as: [FUNCTION] → [D] CONTROLLER → TAB [®] KEYBOARD/PANEL → [A] 1 INITIAL TOUCH.
One-touch Piano Play This convenient, easy-to-use feature completely and automatically reconfigures the entire instrument for optimum piano performance. No matter what settings you’ve made from the panel, you can instantly call up the piano settings by a single button press. Press the piano-shaped [PIANO RESET] button on the lower right of the panel.
Using the Pedals The instrument features three pedals. Left Pedal Damper Pedal Quick Guide Sostenuto Pedal ● Damper Pedal (Right) The damper pedal performs the same function as the damper pedal on an actual acoustic piano, letting you sustain the sound of the voices even after releasing the keys. n • Some Voices may sound continuously or have a long decay after the notes have been released while the damper pedal is held.
Adjusting the Tempo or Setting the Time Signature of the Metronome Sound ■ Adjusting the Metronome Tempo Press the TEMPO [–]/[+] button to call up the pop-up tempo setting display. 2 Press the TEMPO [–]/[+] buttons to set the tempo. Pressing and holding either button lets you continuously increase or decrease the value. You can also use the [DATA ENTRY] dial to adjust the value. To reset the tempo, press the TEMPO [–]/[+] buttons simultaneously.
Playing Various Voices The instrument features a variety of Voices such as strings or wind instruments, including exceptionally realistic piano Voices. Playing Preset Voices Quick Guide The preset Voices are categorized and contained in appropriate folders. VOICE category selection buttons on the panel correspond to the categories of the preset Voices. For example, press the [PIANO] button to display various piano Voices.
3 Press one of the [A]–[J] buttons to select the desired Voice. You can call up the information for the selected Voice by pressing the [7π] (INFORMATION) button. n The Voice type and its defining characteristics are indicated above the Preset Voice name. For details on the characteristics, see page 78. Quick Guide n You can instantly jump back to the original display by “double-clicking” on one of the [A]–[J] buttons. 4 Play the keyboard.
Playing the Voice Demos To listen to the various Voices and hear how they sound especially in context, listen to the demo songs for each Voice. 1 2 In the Voice Selection display (page 33 step 3), press the [8†] (DEMO) button to start the Demo for the selected Voice. To stop the Demo, press the [8†] (DEMO) button again.
Practicing with the Songs Quick Guide n Song On the instrument, performance data is called a “Song.” Playing Back Songs Before Practicing The instrument includes not only the preset demo Songs, but also many preset Songs. This section covers basic information on playing back the preset Songs or Songs in a CD-ROM. 1 Press the [SONG SELECT] button to call up the Song selection display. 2 Press one of the [A]–[J] buttons to select a Song category.
Playing Songs saved to USER (page 43) 1 2 Press the [SONG SELECT] button to call up the Song selection display. 3 Press one of the [A]–[J] buttons to select the desired Song. Press the TAB [√][®] button to select the USER tab. Quick Guide n Select the file to which the data is saved. You can also select the specified file to which the data is saved by pressing the [USER] button.
Boost the volume of the part to be practiced On the instrument, a single Song can contain separate data for up to sixteen MIDI channels. Specify the channel for practicing and increase the playback volume for the channel. 1 Select a Song. The method for selecting a Song is the same as “Playing Back Songs Before Practicing (page 35 step 1–5).” 2 Press the [MIXING CONSOLE] button to call up the MIXING CONSOLE display. Quick Guide 3 2, 4 3 4 Press the TAB [√][®] buttons to select the VOL/VOICE tab.
Displaying Music Notation (Score) You can view the music notation of the selected Song. We suggest that you read through the music notation before starting to practice. Quick Guide n • The instrument can display the music notation of commercially-available music data or your recorded Songs. • The displayed notation is generated by the instrument based on the Song data.
Set the detailed parameters of the view type as desired. 1 Press the [8π†] (SETUP) button to call up the detailed setting display. 2 Press the [1π†]–[6π†] buttons to set the view type. KEY SIGNATURE This lets you enter key signature changes in the middle of a song, at the stopped position. This menu is useful when the selected Song contains no key signature settings for displaying notation.
3 Press the [TRACK 1 (R)] button to mute the right-hand part. The indicator of the [TRACK 1 (R)] button goes out. You can now play that part by yourself. n Have the guide lamp flash a lead-in to the music In the GUIDE LAMP TIMING, select NEXT (page 142). 4 Press the SONG [PLAY/PAUSE] button to start playback. Practice the muted part using the guide lamps. Quick Guide n Adjusting the tempo Refer to page 31.
Practicing the Left-hand Part (TRACK 2) Using the Guide Lamps 1,2 3 Follow the same steps as in “Practice the Right-hand Part (TRACK 1) Using the Guide Lamps” on page 39. Press the [TRACK 2] button to mute the left-hand part. The indicator of the [TRACK 2 (L)] button goes out. You can now play that part by yourself. Press the SONG [PLAY/PAUSE] button to start playback and practice the muted part using the guide lamps. 5 Press the SONG [STOP] button to stop playback. 6 Turn the [GUIDE] button off.
Other Methods for Specifying the A–B Repeat Range ● Specifying the repeat range while Songs are stopped 1 2 3 4 Press the [FF] button to advance to the Point A location. Press the [REPEAT] button to specify Point A. Press the [FF] button to advance to the Point B location. Press the [REPEAT] button again to specify Point B. ● Specifying the repeat range between Point A and the end of the Song Quick Guide Specifying only Point A results in repeat playback between Point A and the end of the Song.
7 1 2 3 4 5 Save the recorded performance. Press the [SONG SELECT] button to call up the Song selection display. Press the TAB [√][®] buttons to select the appropriate tab (USER, USB, etc.) to which you want to save the data. Select USER to save the data to internal memory, or select USB to save the data to a USB storage device. Press the [6†] (SAVE) button to call up the file naming display. Quick Guide Enter the file name (page 73). Press the [8π] (OK) button to save the file.
Quick Guide 4 Press the SONG [PLAY/PAUSE] button to start playback. 5 Play the keyboard. The instrument automatically matches your performance on the keyboard to the Song playback and chords, no matter what keys you play. It even changes the sound according to the way you play. Try playing in the three different ways below. ● Playing the left and right hand together ● Playing the left and right hand together ● Playing the left hand and right hand (method 1). (method 2). alternately.
Playing “Mary Had a Little Lamb” with the Auto Accompaniment Feature MARY HAD A LITTLE LAMB Traditional Style: Country Pop C 3 2 1 C 2 1 C 2 1 1 1 2 C 2 C 4 G 3 2 1 3 3 4 5 Quick Guide 1 3 G 3 1 2 Ending C 1 1 Press the STYLE CONTROL “COUNTRY” button. Enabling tempo display above Style name You can select whether the tempo is displayed above the Style name or not. 1 2 Call up the operation display.
Quick Guide 2 Press one of the [A]–[J] buttons to select a Style “CountryPop.” n • The Style type and its defining characteristics are indicated above the Preset Style name. For details on the characteristics, see page 107. • When the [7π] (REPERTOIRE) button is pressed after selecting a Style, you can call up the custom panel settings (for voices and tempos, etc.) designed to best match the selected Style. To return to the previous display, press the [EXIT] button.
Adjusting the volume balance between the Style and the keyboard (page 40) This lets you adjust the volume balance between Style playback and the sound you play on the keyboard. 1 Call up the Main display. [DIRECT ACCESS] → [EXIT] n The Balance display is indicated at the bottom of the Main display. If the Balance display is not selected, press the [EXIT] button. 2 To adjust the Style volume, press the [2π†] button. To adjust the keyboard (RIGHT 1) volume, press the [6π†] button.
During Style Playback Quick Guide ● Main This is used for playing the main part of the Song. It plays an accompaniment pattern of several measures, and repeats indefinitely. Each preset Style features four different patterns. Press one of the MAIN [A]–[D] buttons during Style playback. ● Fill In The fill-in sections let you add dynamic variations and breaks in the rhythm of the accompaniment, to make your performance sound even more professional.
About the section button (INTRO/MAIN/ENDING, etc.) lamps • Green The section is not selected. • Red The section is currently selected. • Off The section contains no data and cannot be played. Quick Guide Learning How to Play (Indicate) Chords for Style Playback Learning the Notes to Play for Certain Chords If know the name of a chord but don’t know how to play it, you can have the instrument show you the notes to play (Chord Tutor function). 1 Call up the operation display.
Checking How to Play Chords with the Guide Lamps For Songs containing chord data, you can have the individual notes of the chords indicated with the Guide lamps on the instrument. 1 Quick Guide 2 Select a Song (page 35). Press the [FUNCTION] button and press the [B] button to call up the Song Setting display, and make sure that the GUIDE MODE is set to “Follow Lights.” 3 Press the [ACMP ON/OFF] button to turn on Auto Accompaniment. 4 Press the [GUIDE] button.
Helpful hints for using One Touch Setting ● Automatically changing One Touch Settings with the Main sections (OTS Link) The convenient OTS (One Touch Setting) Link function lets you automatically have One Touch Settings change when you select a different Main section (A–D).To use the OTS Link function, press the [OTS LINK] button. n Setting the timing for OTS changes The One Touch Settings can be set to change with the sections in one of two different timings (page 110).
Calling Up Ideal Setups for Each Song—Music Finder Quick Guide If you want to play in a certain genre of music but don’t know which Style and Voice settings would be appropriate, the convenient Music Finder function can help you out. Simply select the desired music genre from among the Music Finder “Records,” and the instrument automatically makes all appropriate panel settings to let you play in that music style. A new record can be created by editing the currently selected one (page 114).
4 Play the keyboard. Notice that the panel settings have been automatically changed to match the music genre of the selected record. n • Tempo Lock Tempo Lock function lets you avoid changing the Tempo during Style playback when selecting another record. To turn on the Tempo Lock function, press the [I] (TEMPO LOCK) button in the Music Finder display. • Parameter Lock You can “lock” specific parameters (e.g., effect, split point, etc.) to make them selectable only via the panel controls (page 132).
Singing Along with Song Playback (Karaoke) or Your Own Performance Quick Guide Connect a microphone to the instrument and sing along with Song playback (Karaoke) or your own performance. The lyrics can be displayed when the Song contains lyric data. Sing with the microphone as you read the lyrics shown in the display. Lyrics can also be displayed with the music score, letting you play and sing while following along with the notation and lyrics.
Singing with the Lyrics Display Try singing while playing back a Song containing lyric data 1 Select a Song (page 35). 2 Press the [LYRICS/TEXT] button to display the lyrics. When the Text display appears, press the [1†] (LYRICS) button to display the lyrics. Press the SONG [PLAY/PAUSE] button to start playback. Quick Guide 3 Sing while following along with the lyrics on the display. The color of the lyrics changes as the Song plays. 4 Press the SONG [STOP] button to stop playback.
Quick Guide Displaying the lyrics/text on an external TV, video, or computer monitor The lyrics/text indicated on the display can also be output via the VIDEO OUT/RGB OUT terminal. 1 Use an appropriate cable to connect the [VIDEO OUT]/[RGB OUT] connector of the instrument to the video input connector on the TV/computer monitor. 2 Set the external television, video, or computer monitor signal (NTSC, PAL, or RGB) used by your video equipment, if necessary. 1 Call up the operation display.
Adding Harmony Vocals to Your Voice You can also automatically apply various harmony vocals to your voice. 1 Select a Song which contains chord data (page 35). If the Song contains this data, the current chord name will be displayed in the Main display during Song playback, letting you easily check whether the Song contains chord data or not. 2 Call up the operation display.
Adjusting the microphone and Song volume (page 40) You can adjust the volume balance between the Song playback and the microphone. 1 Call up the Main display. [DIRECT ACCESS] → [EXIT] n The Balance display is indicated at the bottom of the Main display. If the Balance display is not indicated, press the [EXIT] button. Quick Guide 2 To adjust the microphone volume, press the [4π†] button. To adjust the Song volume, press the [1π†] button.
Displaying the Music Score on the Instrument and the Lyrics and Text on external monitor This convenient sing-along function lets you have the music score shown on the display of the instrument (for your playing purposes), while only the lyrics are shown on a separate external monitor (page 56) so your audience can sing along. 1 Call up the operation display. [FUNCTION] → [J] UTILITY → TAB [√][®] SCREEN OUT Press the [3π]/[4π] button to select LYRICS.
Quick Guide Recording Your Performance as Audio (USB Audio Recorder) Here you’ll learn how to record your performance as audio data to a USB flash memory. For example, by connecting a guitar, microphone or other device to the instrument, you can record an ensemble performance of guitar and keyboard together or record yourself singing along with Song playback. The performance data is saved as a WAV file of conventional CD quality (44.1 kHz/16 bit).
3 Press the [USB] button. 3 Quick Guide 4 4 5 Press the [E] (USB AUDIO RECORDER) button to call up the recording display (USB AUDIO RECORDER display). If necessary, press the [E] (PROPERTY) button to call up the Property display, then check the information of the USB flash memory. 5 6, 7 8 The following information is indicated on the PROPERTY display. • DRIVE NAME ...................................... Number of the USB storage device (USB 1, USB 2, etc.) • ALL SIZE .................................
Playing Back the Recorded Performance Play back the recorded performance. 1 Call up the USB AUDIO RECORDER display. [USB] → [E] (USB AUDIO RECORDER). 2 Press the [7π†]/[8π†] (AUDITION) button to display the audio files (WAV data) saved to the connected USB flash memory. Quick Guide The file recorded is selected in step 1-7 (page 60).
Basic Operation Selecting Message Language You can select the desired language of the display messages. 1 2 3 Call up the operation display. [FUNCTION] → [J] UTILITY → TAB[√][®] OWNER Use [4π†]/[5π†] (LANGUAGE) buttons to select the language. The language selected here is also used for various “Messages” shown during operations. Press the [EXIT] button to return to the previous display.
Instant Selection of the Displays—Direct Access Instant Selection of the Displays— Direct Access With the convenient Direct Access function, you can instantly call up the desired display—with just a single additional button press. 1 Basic Operation 2 Press the [DIRECT ACCESS] button. A message appears in the display prompting you to press the appropriate button. Press the button corresponding to the desired setting display to instantly call up that display.
Basic Displays (Main Display and File Selection Display) Basic Displays (Main Display and File Selection Display) There are two basic display types – Main and Selection. Here are explanations of each display segment and its basic operation. Main Display The Main display shows the current basic settings of the instrument such as the currently selected Voice and Style, allowing you to see them at a single glance. The Main display is the one you’ll usually see when you play the keyboard.
Basic Displays (Main Display and File Selection Display) File Selection Display Configuration and Basic Operation The File Selection display appears when you press one of the buttons shown below. From here you can select Voices, Styles, and other data.
Basic Displays (Main Display and File Selection Display) File Selection Display Basic Operation 1 Select the file to which the data is saved. You can also select the specified file to which the data is to be saved by pressing the [USB]/ [USER] buttons. [USB]/[USER] → [A] SONG/[B] STYLE/[F] VOICE → [A]–[J] 3 4 3 3 1 2 3 4 Basic Operation 2 Select the tab containing the desired file by using the TAB [√][®] buttons.
Basic Displays (Main Display and File Selection Display) File/Folder Operations in the File Selection Display • Saving Files ............................................................................................. page 69 • Copying Files/Folders (Copy & Paste)....................................................... page 70 • Moving Files (Cut & Paste)....................................................................... page 71 • Deleting Files/Folders .................................................
Basic Displays (Main Display and File Selection Display) Saving Files This operation lets you save your original data (such as Songs and Voices you’ve created) to a file. 1 After you’ve created a Song or Voice in the relevant SONG CREATOR or VOICE SET display, press the [SAVE] display button. The File Selection display for the corresponding data appears. Keep in mind that the Save operation is executed from the File Selection display.
Basic Displays (Main Display and File Selection Display) Basic Operation Restrictions for protected Songs Commercially available song data may be copy protected to prevent illegal copying or accidental erasure. They are marked by the indications at the upper left side of the file names. The indications and relevant restrictions are detailed below. Prot. 1 Indicates Preset Songs saved to the User tab display, Disk Orchestra Collection (DOC) Songs, and Disklavier Piano Soft Songs.
Basic Displays (Main Display and File Selection Display) Moving Files (Cut & Paste) This operation lets you cut a file and paste it to another location (folder). 1 2 3 Call up the display containing the file you want to move. Press the [2†] (CUT) button to cut the file. The pop-up window for the Cut operation appears at the bottom of the display. Press one of the [A]–[J] buttons corresponding to the desired file. To cancel the selection, press the same [A]–[J] button again.
Basic Displays (Main Display and File Selection Display) Renaming Files/Folders This operation lets you rename files/folders. 1 2 Basic Operation 3 4 5 6 Call up the display containing the file/folder you want to rename. Press the [1†] (NAME) button. The pop-up window for the Rename operation appears at the bottom of the display. Press one of the [A]–[J] buttons corresponding to the desired file/folder. Press the [7†] (OK) button to confirm the file/folder selection.
Basic Displays (Main Display and File Selection Display) Entering Characters The instructions that follow show you how to enter characters in naming your files/ folders and when entering the Keyword for Music Finder function/website. The method is much the same as entering names and numbers to a conventional mobile phone. Entering characters should be done in the display shown below. 1 Change the type of character by pressing the [1π] button.
Restoring the Factory-programmed Settings Basic Operation • Inserting a Character 1 Move the cursor to the desired position. Use the same operation as in “Deleting Characters” above. 2 Press the [2π†]–[6π†], [7π] buttons to enter numbers and symbols. 3 Press the [8π] (OK) button to enter characters. • Entering a Space 1 Move the cursor to the desired position. Use the same operation as in “Deleting Characters” above. 2 Press [6†] button to call up the mark list.
Restoring the Factory-programmed Settings Restoring the Factory-programmed Settings Independently by Item 1 2 CAUTION Call up the operation display. [FUNCTION] → [J] UTILITY → TAB[®]SYSTEM RESET Select items by pressing the [1π†]–[3π†] buttons. Restores the System Setup parameters to the original factory resettings. Refer to the separate Data List booklet for details about which parameters belong to the System Setup.
Data Backup 3 Press one of the [F]–[I] buttons to call up the relevant display for saving your data. SYSTEM SETUP Parameters set on the various displays such as the [FUNCTION] → UTILITY and microphone setting display are handled as a single System Setup file. Refer to the separate Data List booklet for details on which parameters belong to the System Setup. MIDI SETUP The MIDI settings including the MIDI templates on the User tab display are handled as a single file.
Data Backup Backup procedure 1 Song, Style, Registration Memory Bank and Voice Data 1 2 Insert/connect the backup USB storage device (destination). Call up the display containing the desired file to be copied. Song: Press the [SONG SELECT] button. Registration Memory Bank: Press simultaneously REGISTRATION MEMORY [REGIST BANK] buttons [+][–] . Voice: Press one of the VOICE category selection buttons. 3 4 5 6 7 8 Select the USER tab by using the TAB [√][®] buttons.
Using, Creating and Editing Voices Reference to Quick Guide pages Reference Playing Voices ................................................................................ page 28 Playing the Piano Voice ........................................................... page 28 Playing Various Voices .............................................................
Playing Different Voices Simultaneously Playing Different Voices Simultaneously Reference The instrument keyboard features various functions and performance conveniences that are simply unavailable on an acoustic instrument. It allows you to play several different Voices together in a layer, or play one Voice with your left hand while you play a different Voice (or even two layered Voices!) with your right.
Playing Different Voices Simultaneously Playing Two Voices Simultaneously (Right 1 and 2 Parts) You can play two Voices simultaneously with the Right 1 and 2 parts by turning Dual on. For the selected part, a LEFT mark appears at the right of the Voice name in the Main display. Using, Creating and Editing Voices Quickly selecting Voices for Right 1 and 2 parts You can quickly select the Right 1 and 2 part Voices, just from the VOICE category selection buttons.
Playing Different Voices Simultaneously Playing Different Voices with the Left and Right Hands (Right 1 and Left Parts) You can play different Voices with the Left and Right Hands (Right 1 and Left parts) by turning Split on. 1 Press the PART ON/OFF [SPLIT (LEFT)] button to play different Voices with the Right and Left Hands (Right 1 and Left parts). For the selected part, a RIGHT mark appears at the left of the Voice name in the Main display.
Enhancing the Acoustic Realism of the Sound (iAFC) Enhancing the Acoustic Realism of the Sound (iAFC) iAFC cannot be used in the following cases. • When the lid is closed or open with the shorter stay. • When the Speaker setting is Headphones SW (page 17), and headphones are connected. • When the Speaker setting is Off. Using, Creating and Editing Voices iAFC uses Yamaha’s EMR (Electronic Microphone Rotator) technology to ensure stability against acoustic feedback.
Enhancing the Acoustic Realism of the Sound (iAFC) 4 Press the [5π†]/[6π†] buttons to adjust the SPATIAL EFFECT depth. • SPATIAL EFFECT Spatial Effect creates a sense of reverberation and spaciousness by picking up the output sound using internal microphones and output the sound from the soundboard. The spread and spaciousness of the sound is different depending on the depth. The default setting for the depth is 30.
Changing Pitch Changing Pitch Transpose Transpose the pitch of the keyboard up or down (in semitones). • Transposing during performance You can easily set the desired transposition of the overall sound of the instrument by pressing the TRANSPOSE [–]/[+] buttons. • Transposing before performance Change the transpose settings in the MIXING CONSOLE display. You can set the transposition for the keyboard pitch (KBD), song playback (SONG), or overall sound of the instrument (MASTER), respectively.
Changing Pitch 4 Change the following settings as necessary. • Tuning the individual notes of the keyboard (TUNE) 1 2 Press the [3π†] button to select the note for tuning. Use the [4π†]/[5π†] buttons to set the tuning in cents. • Determines the base note for each scale. Press the [2π†] button to select the base note. When the base note is changed, the pitch of the keyboard is transposed, yet maintains the original pitch relationship between the notes.
Adding Effects to Voices Played on the Keyboard Adding Effects to Voices Played on the Keyboard The instrument features a sophisticated multi-processor effect system which can add extraordinary depth and expression to your sound. 1 Using, Creating and Editing Voices 2 3 4 Call up the operation display. [DIRECT ACCESS] → [EXIT] Select the desired part for which you want to add effects by pressing one of the [A]–[C], [F]–[H] buttons. Press the [VOICE EFFECT] button to call up the VOICE EFFECT display.
Adding Effects to Voices Played on the Keyboard Selecting the Harmony/Echo type You can select the desired Harmony/Echo effect from a variety of types. In order to make the type you’ve selected here effective, set HARMONY/ECHO to On in the display shown in step 4 above. 1 2 3 Call up the operation display by pressing the [J] (TYPE SELECT) button. Use the [1π†]–[3π†] buttons to select the Harmony/Echo type (See below). Use the [4π†]–[8π†] buttons to select various Harmony/Echo settings (page 88).
Editing the Volume and Tonal Balance (MIXING CONSOLE) ● Multi Assign Type Multi Assign effect automatically assigns notes played simultaneously in the right-hand section of the keyboard to separate parts (Voices). Both of the keyboard part [RIGHT 1] and [RIGHT 2] should be turned on when using the Multi Assign effect. The Right 1 and Right 2 Voices are alternately assigned to the notes in the order you play.
Editing the Volume and Tonal Balance (MIXING CONSOLE) 2 3 4 5 6 Use the TAB [√][®] buttons to call up the relevant setting display. For information on the available parameters, see the section “Adjustable items (parameters) in the MIXING CONSOLE displays” on page 90. Press the [MIXING CONSOLE] button repeatedly to call up the MIXING CONSOLE display for the relevant parts. The MIXING CONSOLE displays actually consist of several different part displays. The part name is indicated at the top of the display.
Editing the Volume and Tonal Balance (MIXING CONSOLE) Adjustable Items (parameters) in the MIXING CONSOLE Displays The following explanations cover the available items (parameters) in the MIXING CONSOLE displays. VOL/VOICE • The RHY2 channel in the STYLE PART display can only be assigned to Drumkit Voices and SFX kit Voices. • When playing GM song data, channel 10 (in the SONG CH 9–16 page) can only be used for a Drum Kit Voice. SONG AUTO REVOICE See page 91.
Editing the Volume and Tonal Balance (MIXING CONSOLE) EQ (Equalizer) TYPE Select the desired EQ type to suit the type of music and the performance environment (page 95). This affects the overall sound of the instrument. EDIT For editing the EQ (page 95). EQ HIGH Determines the center frequency of the high EQ band that is attenuated/boosted for each part. EQ LOW Determines the center frequency of the low EQ band that is attenuated/boosted for each part. CMP (Master Compressor) See page 97.
Editing the Volume and Tonal Balance (MIXING CONSOLE) 7 8 Press the [8π] (OK) button to apply your Revoice settings. To cancel the Revoice operation, press the [8†] (CANCEL) button. In the VOL/VOICE tab display, press the [F] button to set SONG AUTO REVOICE to ON. Effect Type ■ Selecting an Effect type Using, Creating and Editing Voices 1–3 Same operation as in the “Basic Procedure” on page 88. In step 2, select the EFFECT tab.
Editing the Volume and Tonal Balance (MIXING CONSOLE) Effect Block Effect-applicable parts Effect characteristics REVERB All parts Reproduces the warm ambience of playing in a concert hall or jazz club. CHORUS All parts Produces a rich “fat” sound as if several parts are being played simultaneously.
Editing the Volume and Tonal Balance (MIXING CONSOLE) 10 Re-selecting the Effect block, category and type Use the [1π†]–[3π†] buttons. The re-selected effect configuration is displayed at the upper left side box in the display. If you have selected one of the DSP 2–5 effect blocks in step 5: You can edit its standard parameters as well as its variation parameter. To select the standard type of parameters, press the [B] button. To select its variation parameter, press the [E] button.
Editing the Volume and Tonal Balance (MIXING CONSOLE) EQ (Equalizer) Equalizer (also called “EQ”) is a sound processor that divides the frequency spectrum into multiple bands that can be boosted or cut as required to tailor the overall frequency response. Usually an equalizer is used to correct the sound from speakers to match the special character of the room.
Editing the Volume and Tonal Balance (MIXING CONSOLE) 6 Use the [A]/[B] buttons to select a preset EQ type. 6 9 Using, Creating and Editing Voices 8 7 8 7 Use the [3π†]–[7π†] buttons to boost or cut each of the five bands. Use the [8π†] button to boost or cut all the five bands at the same time. Adjust the Q (bandwidth) and the FREQ (center frequency) of the band selected in step 7. • Bandwidth (also called “Shape” or “Q”) Use the [1π†]button. The higher the value of Q, the narrower the band width.
Editing the Volume and Tonal Balance (MIXING CONSOLE) Master Compressor Compressor is an effect commonly used to limit and compress the dynamics (softness/loudness) of an audio signal. For signals that vary widely in dynamics, such as vocals and guitar parts, it “squeezes” the dynamic range, effectively making soft sounds louder and loud sounds softer. When used with gain to boost the overall level, this creates a more powerful, more consistently high-level sound.
Editing the Volume and Tonal Balance (MIXING CONSOLE) ■ Editing and Saving the selected Master Compressor 6 Use the [1π†]/[2π†] buttons to select the frequency curve for the Compressor, or which frequencies compression is applied to. For example, select “LOW” when you want to emphasize low frequencies, and “HIGH” when you want to emphasize high frequencies. Using, Creating and Editing Voices 8 6 Threshold: Determines the minimum level at which compression starts.
Voice Creating (Voice Set) Voice Creating (Voice Set) The instrument has a Voice Set feature that allows you to create your own Voices by editing some parameters of the existing Voices. Once you’ve created a Voice, you can save it as a User Voice to the USER/(USB) display for future recall. The editing method is different for the ORGAN FLUTES Voices and for other Voices. Basic Procedure 1 2 Select the desired Voice (other than an Organ Flutes Voice) (page 32).
Voice Creating (Voice Set) Editable Parameters in the VOICE SET Displays The available parameters differ depending on the Voice. Changes to velocity curve according to Touch sensitivity TOUCH SENSE DEPTH Changes to velocity curve according to VelDepth (with Offset set to 64) The following covers in detail the editable parameters that are set in the displays explained in step 3 of the “Basic Procedure” on page 99. The Voice Set parameters are organized into five different displays.
Voice Creating (Voice Set) 2. LEFT PEDAL This allows you to select the function to be assigned to the left pedal. FUNCTION Selects the function to be assigned to the left pedal. For details on the pedal functions, see page 191. [2π†]–[8π†] buttons (RIGHT 1, RIGHT 2, LEFT, etc.) Determines whether the assigned function is effective or not for the respective keyboard part. This also determines the depth for the function. For details, see page 192.
Voice Creating (Voice Set) ● EG The EG (Envelope Generator) settings determine how the level of the sound changes in time. This lets you reproduce many sound characteristics of natural acoustic instruments—such as the quick attack and decay of percussion sounds, or the long release of a sustained piano tone. ATTACK Determines how quickly the sound reaches its maximum level after the key is played. The lower the value, the quicker the attack.
Voice Creating (Voice Set) 2. DSP DSP TYPE Selects the DSP effect category and type. Select a type after selecting a category. VARIATION Two variations are provided for each DSP type. Here, you can edit the VARIATION on/off status and variationparameter value setting. ON/OFF The factory-programmed assignments are set to variation-off for all Voices (standard variation of DSP is assigned). If you select VARIATION ON here, a variation of the DSP effect is assigned to the Voice.
Voice Creating (Voice Set) 2 Using, Creating and Editing Voices 3 In the ORGAN FLUTES Voice Selection display, press the [6π] (FOOTAGE) button to call up the VOICE SET [ORGAN FLUTES] display. Use the TAB [√][®] buttons to call up the relevant setting display. For information on the available parameters, see the following “Editable Parameters in the VOICE SET [ORGAN FLUTES] displays.” (When selecting the EFFECT/EQ tab display.
Voice Creating (Voice Set) Editable Parameters in the VOICE SET [ORGAN FLUTES] displays The following covers in detail the editable parameters that are set in the displays explained in step 3 of the “Basic Procedure” on page 103. The Organ Flutes parameters are organized into three different pages. The parameters in each page are described separately, below. These are also treated as part of the Voice Set parameters (page 106), which are automatically called up when the Voice is selected.
Voice Creating (Voice Set) EFFECT/EQ Same parameters as in the VOICE SET “EFFECT/EQ” tab display explained on page 102. Disabling automatic selection of Voice Sets (effects, etc.) Each Voice is linked to its related parameter settings that are indicated in the VOICE SET displays, including effects and EQ. Usually these settings are automatically called up when a Voice is selected. However, you can also disable this feature by the operation in the relevant display as explained below.
Using, Creating and Editing the Auto Accompaniment Styles Reference to Quick Guide pages Playing “Mary Had a Little Lamb” with the Auto Accompaniment Feature ..................................................................... page 45 Pattern Variation ...................................................................... page 47 Learning How to Play (Indicate) Chords for Style Playback ...... page 49 Appropriate Panel Settings for the Selected Style (One Touch Setting) ....................................
Playing Only the Rhythm Channels of a Style Using, Creating and Editing the Auto Accompaniment Styles SINGLE FINGER AI: Artificial Intelligence Starting the rhythm with Sync Start You can also start the rhythm simply by playing the keyboard, if Sync Start is enabled (turn on the [SYNC START] button). The rhythm does not sound for the Pianist Styles (or other similar Styles). When you want to use any of these Styles, always make sure that ACMP ON/OFF is turned on.
Style Playback-related Settings Turning channels of the Style on/off A Style contains eight channels: RHY1 (Rhythm 1) – PHR2 (Phrase 2). You can add variations and change the feeling of a Style by selectively turning channels on/off as the Style plays. 1 Press the [CHANNEL ON/OFF] button to call up the CHANNEL ON/ OFF display. When the STYLE tab is not selected, press the [CHANNEL ON/OFF] button again. 2 Press the [1†]–[8†] buttons to turn the channels on or off.
Style Playback-related Settings 2 Using, Creating and Editing the Auto Accompaniment Styles Data that is recorded when recording a Song Please note that both the Voice that is sounded and the chord data will be recorded when set to “STYLE,” and only the chord data will be recorded when set to “OFF” or “FIXED.” Use the [1π†]–[8π†] buttons for each setting.
Split Point Settings Tempo This determines whether the tempo changes or not when you change Styles during Style playback. HOLD ................The tempo setting of the previous Style is maintained. RESET.................The tempo changes to that of the initial default tempo for the selected Style. Part On/Off This determines whether the Style Channel On/Off status changes or not when you change Styles during Style playback. HOLD .................
Editing the Volume and Tonal Balance of the Style (MIXING CONSOLE) Editing the Volume and Tonal Balance of the Style (MIXING CONSOLE) You can set various mixing-related parameters of the Style. (See “Adjustable items (parameters) in the MIXING CONSOLE display” on page 90.) Call up the “STYLE PART” display in step #3 of the Basic Procedure in “Editing the Volume Balance and Voice Combination (MIXING CONSOLE)” on page 88, and follow the instructions.
Convenient Music Finder feature • Search by song title or music genre (MUSIC) or keyword 1 Press the [A] (MUSIC)/[B] (KEYWORD) button to call up the character entry display. 2 Enter the song title or music genre, or the keyword (page 73). • Search by Style name Entering several different keywords You can search several different keywords simultaneously by inserting a separator (comma) between each. 1 Press the [C] (STYLE) button to call up the Style selection display.
Convenient Music Finder feature Creating a Set of Favorite Records As convenient as the Search function is in plumbing the depths of the Music Finder records, you may want to create a “folder” of favorite records—so you can quickly call up those Styles and settings you use most often in your performance. 1 2 Using, Creating and Editing the Auto Accompaniment Styles 3 Select the desired record from the Music Finder display.
Convenient Music Finder feature 3 Edit the record as desired. • Editing the song name/keyword/Style name Input each item in the same way as done in the Search display (page 113). • Changing the Tempo Press the [1π†] (TEMPO) button. • Memorizing the Section (Intro/Main/Ending) Use the [2π†]/[4π†] buttons to select the section that will automatically be called up set when the record is selected.
Convenient Music Finder feature Calling up Music Finder Records Saved to USER/USB To call up the Music Finder records you’ve saved to USER/USB, follow the instructions below. CAUTION Using, Creating and Editing the Auto Accompaniment Styles • Selecting “REPLACE” automatically deletes all your original records from internal memory. Make sure that all important data has been archived to another location beforehand.
Style Creator Viewing information about Music Finder records Information on the record about which you like in Music Finder is called, and the song of the model is downloaded, or it is possible to add it to musical instruments by downloading the Music Finder record which you like. For more details about this service, refer to the following website. http://music.yamaha.com/idc The available contents of the service described at left are subject to change.
Style Creator Creating a Style You can use one of the three different methods described below to create a Style. The created Styles can also be edited (page 123). ■ Realtime Recording ➤ See below This method lets you record the Style by simply playing the instrument. You can select an internal Style that most closely matches your image of the Style you want to create and then re-record parts of the Style as desired, or you can create a new Style from scratch.
Style Creator When using realtime recording based on the internal Styles: Overdub recording not possible. Delete the data before recording. Overdub recording possible. 1 2 3 4 5 Call up the operation display. [FUNCTION] → [F] DIGITAL REC MENU Press the [B] button to call up the Style Creator display. Use the TAB [√][®] buttons, then select the BASIC tab to call up the RECORD display. Call up the display for selecting sections, etc. by pressing the [EXIT] button.
Style Creator 8 Specify the channel to be recorded by simultaneously holding down the [F] (REC CH) button and pressing the appropriate numbered button, [1†]–[8†]. To cancel the selection, press the appropriate numbered button [1†]–[8†] again. 8 10 9 8 Using, Creating and Editing the Auto Accompaniment Styles Limits on the recordable Voices • RHY1 channel: Any except Organ Flute Voice/ S.
Style Creator Rules when recording non-rhythm channels • Use only the CM7 scale tones when recording the BASS and PHRASE channels (i.e., C, D, E, G, A, and B). • Use only the chord tones when recording the CHORD and PAD channels (i.e., C, E, G, and B). C = Chord notes C, R = Recommended notes C R C C R C Using the data recorded here, the auto accompaniment (Style playback) is appropriately converted depending on the chord changes you make during your performance.
Style Creator • Recording channels can be changed in the Song Creator 1–16 tab display; however, they cannot be changed in the Style Creator. Select the recording channel in the BASIC tab display. • In the Style Creator, the channel data can be entered and System Exclusive data can be edited (delete, copy, or move). You can switch between the two by pressing the [F] button. However, Chord, Lyrics, and System Exclusive data cannot be entered.
Style Creator Playing the Style During Style Assembly While you are assembling a Style, you can play back the Style and select the method of playback. Use the [6π†]/[7π†] (PLAY TYPE) buttons in the Style Assembly display to select the playback method. • SOLO Mutes all but the selected channel in the ASSEMBLY tab display. Any channels set to ON in the RECORD display on the BASIC page are played back simultaneously. • ON Plays back the selected channel in the ASSEMBLY tab display.
Style Creator Changing the Rhythmic Feel (GROOVE) The explanation here applies when you select the GROOVE tab in step 4 of “Basic Operation for Editing Styles” (page 123). 1 Press the [A]/[B] button to select the edit menu (page 125). 1 3 4 2 Using, Creating and Editing the Auto Accompaniment Styles 2 3 4 CAUTION The edited Style will be lost if you change to another Style or you turn the power off without executing the Save operation (page 69).
Style Creator ■ GROOVE This lets you add swing to the music or change the “feel” of the beat by making subtle shifts in the timing (clock) of the Style. The Groove settings are applied to all channels of the selected Style. Specifies the beats to which Groove timing is to be applied. In other words, if “8 Beat” is selected, Groove timing is applied to the 8th notes; if “12 Beat” is selected, Groove timing is applied to 8th-note triplets.
Style Creator Editing Data for Each Channel (CHANNEL) The explanation here applies when you select the CHANNEL tab in step 4 of “Basic Operation for Editing Styles” (page 123). 1 Press the [A]/[B] button to select the edit menu (see below). 1 4 5 2 Using, Creating and Editing the Auto Accompaniment Styles 2 3 4 5 CAUTION The edited Style will be lost if you change to another Style or you turn the power off without executing the save operation.
Style Creator Making Style File Format Settings (PARAMETER) Special Parameter Settings Based on Style File Format Source Pattern SOURCE ROOT (Chord Root setting of a Source Pattern) SOURCE CHORD (Chord Type setting of a Source Pattern) Chord change via the chord section of the keyboard. Note Transposition NTR (Note Transposition Rule applied to the Chord Root change) NTT (Note Transposition Table applied to the Chord Type change) Editing of Style File Format data is related only to note conversion.
Style Creator 2 Use the [1π†]/[2π†] (CHANNEL) buttons to select the channel to be edited. The selected channel is shown at the upper left of the display. CAUTION The edited Style will be lost if you change to another Style or you turn the power off without executing the Save operation. 3 Use the [3π†]–[8π†] buttons to edit the data. For details on editable parameters, see below.
Style Creator ■ NTT (Note Transposition Table) This sets the note transposition table for the source pattern. When NTR is set to ROOT FIXED, the transposition table used does not do any note conversion. When NTR is set to ROOT TRANS, the table used only converts the root note. MELODY Suitable for melody line transposition. Use this for melody channels such as Phrase 1 and Phrase 2. CHORD Suitable for chord transposition.
Style Creator ■ NOTE LIMIT This sets the note range (highest and lowest notes) for voices recorded to the style channels. By judicious setting of this range, you can ensure that the voices sound as realistic as possible—in other words, that no notes outside the natural range are sounded (e.g., high bass sounds or low piccolo sounds). The actual notes that sound are automatically shifted to the set range. Example—When the lowest note is C3 and the highest is D4.
Registering and Recalling Custom Panel Setups—Registration Memory The Registration Memory function allows you to save (or “register”) virtually all panel settings to a Registration Memory button, and then instantly recall your custom panel settings by pressing a single button. The registered settings for eight Registration Memory buttons should be saved as a single Bank (file).
Recalling the Registered Panel Setups Saving the Registered Panel Setups You can save all the eight registered panel setups as a single Registration Memory Bank file. Bank 4 Bank 3 Bank 2 Bank 1 1 Registration Memory data compatibility In general, Registration Memory data (Bank files) is compatible among the models CGP-1000/ CVP-409/407/405/403/401. However, the data may not be perfectly compatible, depending on the specifications of each model.
Recalling the Registered Panel Setups Deleting an Unneeded Panel Setup/Naming a Panel Setup The panel setups can be deleted or named individually as desired. 1 2 3 4 Press simultaneously REGISTRATION MEMORY [REGIST BANK] buttons [+][–] to call up the REGISTRATION BANK Selection Display. Press one of the [A]–[J] buttons to select a bank to be edited. Press the [8†] (EDIT) button to call up the REGISTRATION EDIT Display. Edit the panel setups.
Recalling the Registered Panel Setups CAUTION Settings in the REGISTRATION FREEZE display are automatically saved to the instrument when you exit from this display. However, if you turn the power off without exiting from this display, the settings will be lost. 2 3 4 5 Press the [2π†]–[7π†] buttons to select items. Enter checkmarks for the items to be “Frozen” (i.e., to remain unchanged), by pressing the [8π†] button. Press the [FREEZE] button on the panel to turn the Freeze function on.
Recalling the Registered Panel Setups Press one of the REGISTRATION MEMORY [1]–[8] button on the panel, then press the [6π†] (INSERT) button to input the number. • Replacing the number Press the [5π†] (REPLACE) button to replace the number at the cursor position with the currently selected Registration Memory number. • Deleting the number Press the [7π†] (DELETE) button to delete the number at the cursor position. • Deleting all numbers Press the [8π†] (CLEAR) button to delete all numbers in the sequence.
Using, Creating and Editing Songs Reference to Quick Guide Pages Practicing with the Preset Songs .................................................. page 35 Playing Back Songs Before Practicing ..................................... page 35 Displaying Music Notation (Score) ......................................... page 38 One-handed Practice with the Guide Lamps ........................... page 39 Practicing with the Repeat Playback Function ......................... page 41 Recording Your Performance......
Operations for Song Playback Operations for Song Playback This section explains detailed operations and functions related to Song playback which are not covered in the “Quick Guide.” ■ Starting/Stopping a Song Press the SONG [PLAY/PAUSE] button to start Song playback, and press the SONG [STOP] button to stop. In addition, there are several other convenient ways to start/ stop a Song. Depending on the particular Song data, the Style will also play back at the same time.
Operations for Song Playback ■ Top/Pause/Rewind/Fast Forward Moving to the top position of the Song Press the SONG [STOP] button, regardless of whether the Song is stopped or playing back. Pausing the Song Press the SONG [PLAY/PAUSE] button during Song playback. Press the SONG [PLAY/PAUSE] button again and the Song will resume from the current position. Phrase Mark: Phrase Mark is a pre-programmed marker in certain Song data, which specifies a certain location (set of measures) in the Song.
Operations for Song Playback ■ Queuing the Next Playback Song While a Song is playing back, you can queue up the next Song for playback. This is convenient for chaining it to the next Song smoothly during stage performance. Select the Song you want play next in the Song Selection display, while a Song is playing back. The “NEXT” indication appears at the upper right of the corresponding Song name. To cancel this setting, press the [8†] (Cancel) button. Parameter Lock You can “lock” specific parameters (e.
Adjusting the Volume Balance and Voice Combination, etc. (MIXING CONSOLE) Reading Song data automatically when connecting a USB storage device You can have the instrument automatically call up the first Song (not contained in a folder) on a USB storage device, as soon as the device is connected in the [USB TO DEVICE] terminal. 1 Call up the operation display. [FUNCTION] → [J] UTILITY → TAB [√][®] MEDIA 2 Press the [3π]/[4π] (SONG AUTO OPEN) button to select “ON”.
Using the Practice Function (Guide) Changing Voices 1–4 5 6 7 8 The operation steps are the same as in the “Adjusting the Volume Balance of Each Channel” (see page 140). Press the [H] button to select the “VOICE”. Press one of the [1π†]–[8π†] buttons to call up the Voice selection display for the channel. Press one of the [A]–[J] buttons to select a Voice. You can save the changed Voice selection to the Song in the Setup operation (page 162).
Using the Practice Function (Guide) For Keyboard Performance Follow lights With this function, the keyboard guide lamps indicate which notes you should play (page 39). Song playback pauses and waits for you to play. When you play the correct notes, Song playback continues. Any key With this function, you can play the melody of a Song just by pressing a single key (any key is OK) in time with the rhythm. Song playback pauses and waits for you to play any key.
Recording Your Performance Turning playback channels of the Song on and off A Song consists of 16 separate channels. You can independently turn each channel of the selected Song playback on or off. Usually, CH 1 is assigned to [TRACK 1] button, CH 2 is assigned to [TRACK 2] button, and CH 3–16 are assigned to the [EXTRA TRACKS] button. 1 Press the [CHANNEL ON/OFF] button to call up the Song CHANNEL ON/OFF display. If the display shown below does not appear, press the [CHANNEL ON/ OFF] button again.
Recording Your Performance Quick Recording This lets you conveniently and quickly record your performance. 1 2 Press the SONG [REC] and SONG [STOP] buttons simultaneously. A blank Song (“New Song”) is called up for recording. Make the desired panel settings for your keyboard performance. Below are some example settings you may want to try. The RIGHT and/or LEFT parts are recorded onto separate tracks.
Recording Your Performance 4 Start recording. There are several different ways you can start recording. • Starting by playing the keyboard If you’ve selected the SONG [TRACK 1(R)]/[TRACK 2 (L)] buttons in step 3 above, play in the right-hand section of the keyboard (page 79). If you’ve selected the SONG [EXTRA TRACKS (STYLES)] button in step 3 above, play in the left-hand (chord) section of the keyboard (page 111). Recording begins automatically as soon as you play a note on the keyboard.
Recording Your Performance Setting all of the 9–16 channels to “REC” simultaneously While holding the SONG [REC] button, press the SONG [EXTRA TRACKS (STYLE)] button. 2 While holding the SONG [REC] button, press the [1π†]–[8π†] buttons to set the desired channels to “REC”. Normally, the keyboard parts should be recorded to channels 1–8, and the Styles should be recorded to channels 9–16. To cancel the channel selection, press the SONG [REC] button again.
Recording Your Performance 8 Press the [SONG SELECT] button to call up the Song Selection display for saving your data, then save the data in the Song Selection display (page 69). About Song channels Default channel/part assignments are shown below.
Recording Your Performance 3 Press the [A] button to call up the Song Creator display for recording/ editing a Song. 3 4 Select the appropriate tab by using the TAB [√][®] buttons. For recording melodies .............. Select the [1–16] tab. For recording chords .................. Select the [CHORD] tab. 4 5 6 Using, Creating and Editing Songs 5 6 7 148 CGP-1000 Owner’s Manual If you select the “1–16” tab in step 4, press the [F] button to select the channel for recording.
Recording Your Performance Recording Melodies This section explains how to step-record notes, using three music score examples. Example 1 The explanations here apply to step 7 of the section “Basic Operations for Step Recording” on page 148. Since the music score displayed on the instrument is generated from the recorded MIDI data, it may not appear exactly the same as shown below. 3–5 1 6 7 2 * The numbers shown in the notation correspond to the following operation step numbers.
Recording Your Performance 6 Press the [6π†] button to enter a quarter-note rest. To enter the rest, use the [4π†]–[8π†] buttons. (Press the button once to select the rest value, and once again to actually enter it.) A rest having specified note length will be entered. 7 Play the C4 key. 8 Press the SONG [STOP] button to move the cursor to the beginning of the Song. 8 9 Press the SONG [PLAY/PAUSE] button to hear the newly entered notes.
Recording Your Performance About items which can be selected via the [G] [H] [I] buttons in the Step Record display [G] button ........... Determines the velocity (loudness) of the note to be entered. Items Kbd.Vel fff ff f mf mp p pp ppp Velocity to be recorded Actual velocity you play the keyboard with 127 111 95 79 63 47 31 15 About velocity Velocity is determined by how strongly you play the keyboard. The more strongly you play the keyboard, the higher the velocity value and the louder the sound.
Recording Your Performance Example 2 The explanations here apply to step 7 of the “Basic Operations for Step Recording” on page 148. 2–5 6–8 10–13 14–16 9 1 * The numbers shown in the sheet correspond to the following operation step numbers. In this example, keep in mind that one of the steps involves holding down a key on the keyboard while executing the operation. Select the Voice for recording after calling up the Step Record display.
Recording Your Performance 8 9 10 11 12 13 14 15 16 17 Play the keys E3, F3, and A3 in order, according to the notation example. Press the [G] button to select “ .” Press the [H] button to select “Tenuto.” Press the [I] button to select “dotted.” Press the [5π†] button to select the dotted half-note length. Play the A3 key on the keyboard, as specified in the example. Press the [I] button to select “normal” note type. Press the [6π†] button to select the quarter-note length.
Recording Your Performance Example 3 The explanations here apply to step 7 of the “Basic Operations for Step Recording” on page 148. 5 1–4 6 7 * The numbers shown in the sheet correspond to the following operation step numbers. In this example, keep in mind that one of the steps involves holding down a key on the keyboard while executing the entire operations. Select the Voice for recording after calling up the Step Record display.
Recording Your Performance 5 6 7 9 10 11 While holding the C3, E3 and G3 keys on the keyboard, press the [7π†] button. Do not release the C3, E3 and G3 keys yet. Keep holding them while executing the following steps. While holding the C3, E3, G3 and C4 keys on the keyboard, press the [7π†] button, and successively press the [5π†] button. After you press the [5π†] button, release the keys. Using, Creating and Editing Songs 8 While holding the C3 and E3 keys on the keyboard, press the [7π†] button.
Recording Your Performance Recording Chords You can record Chords and Sections (Intro, Main, Ending, and so on) one at a time with precise timing. These instructions show how to record chord changes using the Step Record function. The explanations here apply to step 7 of the “Basic Operations for Step Recording” on page 148. 1 4 7 MAIN A BREAK MAIN B C F G F 2, 3 G7 C 5, 6 8,9 * The numbers shown in the notation correspond to the following operation step numbers.
Recording Your Performance 5 6 7 Press the [6π†] button to select the quarter-note length. Play the chords F, and G7 in the chord section of the keyboard. Press the STYLE CONTROL [MAIN VARIATION B] button. 7 9 C 8 8 9 10 11 12 14 Play the chord C in the chord section of the keyboard. CAUTION Press the SONG [STOP] button to move the cursor to the beginning of the Song. Press the SONG [PLAY/PAUSE] button to hear the newly entered notes. Press the [EXIT] button to exit from the Step Record display.
Recording Your Performance Editing a Recorded Song You can edit the Songs you’ve recorded with any recording method—Quick Recording, Multi Track Recording, or Step Recording. Basic Editing Operation 1 2 3 Select a Song for editing. Call up the operation display. [FUNCTION] → [F] DIGITAL REC MENU Press the [A] button to call up the SONG CREATOR display to record or edit Songs. 3 Using, Creating and Editing Songs 4 Select the appropriate tab by using the TAB [√][®] buttons and edit the Song.
Recording Your Performance Re-Recording a Specific Section—Punch In/ Out (REC MODE) When re-recording a specific section of an already-recorded Song, use the Punch IN/OUT function. In this method, only the data between the Punch In point and the Punch Out point is overwritten with the newly recorded data. Keep in mind that the notes before and after the Punch In/Out points are not recorded over, although you will hear them play back normally to guide you in the Punch In/Out timing.
Recording Your Performance Examples of re-recording with various Punch In/Out settings This instrument features several different ways you use the Punch In/Out function. The illustrations below indicate a variety of situations in which selected measures in an eight-measure phrase are re-recorded.
Recording Your Performance 4 Press the [I] (SAVE) button to call up the Song Selection display for saving your data, then save the data in the Song Selection display (page 69). ■ QUANTIZE menu The Quantize function allows you to align the timing of all the notes in a channel. For example, if you record the musical phrase shown at right, you may not play it with absolute precision, and your performance may have been slightly ahead of or behind the precise timing.
Recording Your Performance ■ Mixing (merging) the data of the specified two channels (MIX menu) This function lets you mix the data of the two channels and place the results in a different channel. It also lets you copy the data from one channel to another. SOURCE 1 Selects the channel (1–16) to be mixed. All MIDI events in the selected channel are copied to the destination channel. SOURCE 2 Selects the channel (1–16) to be mixed.
Recording Your Performance 4 Press the [D] (EXECUTE) button to execute the SETUP recording operation. 5 Press the [I] (SAVE) button to call up the Song Selection display for saving your data, then save the data in the Song Selection display (page 69). Editing Note or Chord Events (CHORD, 1–16) The explanations here apply to the CHORD and 1–16 tab displays in step 4 of the Basic Editing Operation on page 158.
Recording Your Performance About the events shown in the display 1 2 3 About Clock A unit of note resolution. The Quantize size is the number of clocks per quarter note. On the instrument, one clock is equal to 1/1920th of a quarter note. 001 : 1 : 1440 Example Clock Beat Measure number (BAR) 1 Indicates the location (position) of the corresponding event. Same as the indication at the lower left of the display. 2 Indicates the event types (see below). 3 Indicates the event values.
Recording Your Performance Displaying Specific Types of Events (FILTER) In the edit displays various types of events are shown. It may sometimes be difficult to pinpoint the ones you want to edit. This is where the Filter function comes in handy. It lets you determine which event types will be shown in the edit displays. 1 2 3 4 Press the [H] (FILTER) button in the edit displays. Select the event type by using the [2π†]–[5π†] buttons.
Recording Your Performance Editing Lyrics (LYRICS) The explanations here apply to the LYRICS tab display in step 4 of the Basic Editing Operation on page 158. From this display, you can edit the recorded Lyrics events. The operations here are basically the same as in the section “Editing Note or Chord Events” on page 163. Lyrics Events Name Allows you to enter the Song name. Lyrics Allows you to enter lyrics. Control Codes CR Enters a line break in the lyrics text. LF Unavailable on the instrument.
Using a Microphone Reference to Quick Guide pages Singing Along with Song Playback (Karaoke) or Your Own Performance.................................................................................. page 54 Connecting a Microphone........................................................... page 54 Singing with the Lyrics Display ...................................................page 55 Convenient Functions for Karaoke ..............................................page 56 Adjusting the tempo ................
Editing Vocal Harmony Parameters 3 Press one of the [A]–[J] buttons to select a Vocal Harmony type to be edited. 3 3 4 4 5 Press the [8†] (EDIT) button to call up the VOCAL HARMONY EDIT display. If you want to re-select the Vocal Harmony type, use the [1π†]/ [2π†] buttons. Or you can re-select the Vocal Harmony type by pressing the [8π†] (RETURN) button to return to the Vocal Harmony selection display.
Editing Vocal Harmony Parameters Editable Parameters in the VOCAL HARMONY EDIT Display Determines how the harmony notes are applied to the microphone sound when the Harmony mode (page 173) is set to “VOCODER.” CHORDAL TYPE Determines how the harmony notes are applied to the microphone sound when the Harmony mode (page 173) is set to “CHORDAL.” HARMONY GENDER TYPE Determines whether the gender of the harmony sound is changed or not. Off The gender of the harmony sound is not changed.
Adjusting the Microphone and Harmony Sound HARMONY1/2/3 VOLUME Sets the volume of the first (lowest), second, and third (highest) harmony notes. HARMONY1/2/3 PAN Specifies the stereo (pan) position of the first (lowest), second, and third (highest) harmony notes. Random The stereo position of the sound will change randomly whenever the keyboard is played. This is effective when the Harmony mode (page 173) is set to “VOCODER” or “CHORDAL.
Adjusting the Microphone and Harmony Sound 3 Press the TAB [√] button to select the OVERALL SETTING tab display. 3 4 4 6 5 4 5 6 Use the [A]–[J] buttons to select the item (parameter) (see below) to be adjusted. Use the [1π†]–[8π†] buttons to set the value. Press the [EXIT] button to exit from the MICROPHONE SETTING display.
Adjusting the Microphone and Harmony Sound ■ COMPRESSOR This effect holds down the output when the input signal from the microphone exceeds a specified level. This is especially useful for smoothing out vocals that have widely varying dynamics. It effectively “compresses” the signal, making soft parts louder and loud parts softer. • SW (Switch) This turns the Compressor on or off. • TH. (Threshold) This adjusts the input level at which compression begins to be applied.
Adjusting the Microphone and Harmony Sound • MODE All of the Vocal Harmony types fall into one of three modes, which produce harmony in different ways. The harmony effect is dependent on the selected Vocal Harmony mode, and this parameter determines how the harmony is applied to your voice. The three modes are described below. AUTO When the [ACMP ON/OFF] or [LEFT] is set to ON and if chord data exists in the song, the mode is automatically set to CHORDAL. In all other cases, the mode is set to VOCODER.
Talk Setting Talk Setting This function lets you have special settings for making announcements between songs, separate from the settings for your singing performance. 1 2 3 Call up the operation display. [FUNCTION] → [G] MIC SETTING/VOCAL HARMONY Press the [I] (MIC SETTING) button to call up the MICROPHONE SETTING display. Press the TAB [®] button to select the TALK SETTING tab display.
Talk Setting Adjustable Items (Parameters) in the TALK SETTING Tab Display VOLUME This determines the output volume of the microphone sound. PAN This sets the stereo pan position of the microphone sound. REVERB DEPTH This sets the depth of the reverb effects applied to the microphone sound. CHORUS DEPTH This sets the depth of the chorus effects applied to the microphone sound.
Connecting the Clavinova Directly to the Internet The special website can be opened when directly connecting the Clavinova to the Internet. You can purchase and download Song data and other types of data from the special Clavinova website by directly connecting the instrument to the Internet. This section contains terms related to computers and online communications. If there are some terms you are unfamiliar with, refer to the Internet Glossary (page 188).
Accessing the Special Website Accessing the Special Website From the special website, you can audition and purchase Song data, among other things. To access the site, press the [INTERNET] button, while the instrument is connected to the Internet. To close the website display and return to the operation display of the instrument, press the [EXIT] button.
Operations in the Special Website Following Links When there is a link in the page, it is shown as a button or in colored text, etc. To select the link, press the [6†]/[7π†]/[8†] buttons or use the [DATA ENTRY] dial. Press the [8π] (ENTER) button to actually call up the link destination. You can also select and call up links by using the [A]–[J] buttons.
Operations in the Special Website Refreshing a Web Page/Canceling Loading of a Web Page To refresh a web page (to make sure you have the latest version of the page, or to try reloading), press the [5π] (REFRESH) button. To cancel loading of a page (if the page is taking too long to open), press the [6π] (STOP) button. Monitoring the Internet Connection Status The messages and icons at the bottom right of the Internet display indicate the current Internet connection status.
Operations in the Special Website Purchasing and Downloading Data You can purchase and download Song data (for playback on this instrument) and other types of data from the special website. For details on purchasing and downloading data, refer to the instructions on the site itself. CAUTION The purchased data will be lost if you turn the power to the instrument off during download.
Operations in the Special Website 3 Select the position of the new bookmark by pressing the [1π†] (π/ †) button. 3 4 5 4 To register the bookmark, press the [7π†] (EXECUTE) button, or press the [8π†] (CANCEL) button to cancel. To return to the browser, press the [8π†] (CLOSE) button. Opening a Bookmarked Page 1 2 Press the [4π†] (BOOKMARK) button to call up the Bookmark display. Press the [1π†] (π/†) button to select the desired bookmark.
Operations in the Special Website Editing Bookmarks From the Bookmark display, you can change the names and rearrange the order of your bookmarks, as well as delete unnecessary bookmarks from the list. 1 2 3 4 5 6 7 † 1 π/† Moves the selection position in the Bookmark list. 2 View Opens the web page of the selected bookmark. 3 Add Used when registering a bookmark (page 180). 4 Move Changes the order of the bookmarks. 1 Select the bookmark you wish to move, then press the [4π†] (MOVE) button.
Operations in the Special Website About the Internet Settings Display From the Internet Settings display, you can make various settings related to the Internet connection, including preferences for the menus and displays. The Internet Settings display has four sub-displays: Browser, LAN, Wireless LAN, and Others. Basic Operation 1 2 3 Press the [5†] (SETTING) button to call up the Internet Setting display. Press the TAB [√][®] buttons to select the desired display.
Operations in the Special Website 6 To execute the setting, press the [3π] (ENTER) button. To cancel, press the [3†] (CANCEL) button. 7 To actually apply all settings changed in the Internet Settings display, press the [7π†] (SAVE) button. To cancel, press the [8π†] (CANCEL) button. Browser 1 2 3 4 5 6 1 Encode Selects the character code encoding for the browser. 2 Home Page Shows and allows editing of the web page which is set as the home page.
Operations in the Special Website Wireless LAN These settings here are only necessary when using a USB wireless LAN adaptor. For a wireless LAN setup, make sure to set both the LAN settings (page 184) and the Wireless LAN settings below. The settings at left are not necessary when using the Wireless Game Adaptor. Make a written note of the settings here, in case you have to enter them again.
Operations in the Special Website Changing the Home Page In the default condition, the top page of the special website is automatically set to be the Home page for the browser. However, you can specify any desired page on the special website to be the Home page. 1 2 3 Open the page you wish to set as your new Home page. Press the [5†] (SETTING) button to call up the Internet Setting display. Press the TAB [√] button to select the BROWSER tab.
Operations in the Special Website Initializing Internet Settings The settings of the Internet function are not initialized when using the Initialize operation of the instrument; Internet settings must be initialized separately, as explained here. Initializing will reset to the default values not only the settings of the browser, but also all settings you have made in the Internet Settings displays (except for the cookies and bookmarks), including those related to Internet connection.
Glossary of Internet Terms Connecting the Clavinova Directly to the Internet Glossary of Internet Terms Broadband An Internet connection technology/service (such as ADSL and optical fiber) that allows for high-speed, highvolume data communication. Browser The software used to search for, access, and view web pages. For this instrument, this refers to the display that shows the contents of the web pages.
Using Your Instrument with Other Devices CAUTION Before connecting the instrument to other electronic components, turn off the power of all the components. Also, before turning any components on or off, make sure to set all volume levels to minimum (0). Otherwise, electrical shock or damage to the components may occur. Connecting Audio & Video Devices (345) n Use audio cables and adaptor plugs having no (zero) resistance.
Connecting Audio & Video Devices [AUX OUT (LEVEL FIXED)] Jacks (RCA pin jacks of [L]and [R]) When these are connected (with RCA pin plug; LEVEL FIXED), the sound is output to the external device at a fixed level, regardless of the [MASTER VOLUME] control setting. Use these when controlling volume with an external audio system, or recording the instrument’s sound to an external audio system.
Using the Footswitch or Foot Controller ([AUX PEDAL] jack) Using the Footswitch or Foot Controller (6 [AUX PEDAL] jack) By connecting a Foot Controller or Footswitch to the [AUX PEDAL] jack, you can have convenient control over various user-assignable functions. For example, connecting the Foot controller FC7 and assigning it the volume control function allows you to add expression to your performance by controlling the volume level of the notes you play.
Using the Footswitch or Foot Controller ([AUX PEDAL] jack) Details on the pedal functions are listed here. For functions indicated with “ “, use only the foot controller; proper * operation cannot be done with a footswitch. Using Your Instrument with Other Devices Assignable Pedal Functions 192 VOLUME* Allows you to use a foot controller to control the volume. This function is available only for the pedal connected to the instrument’s AUX PEDAL jack.
Using the Footswitch or Foot Controller ([AUX PEDAL] jack) INTRO1–3 Same as the [INTRO I–III] buttons. MAIN A–D Same as the [MAIN VARIATION A–D] buttons. FILL DOWN Plays a fill-in, which is automatically followed by the Main section of the button on the immediate left. FILL SELF Plays a fill-in. FILL BREAK Plays a break. FILL UP Plays a fill-in, which is automatically followed by the Main section of the button on the immediate right. ENDING1–3 Same as the [ENDING/rit. I–III] buttons.
Connecting external MIDI devices ([MIDI] terminals)/Connecting a Computer or USB Device Connecting External MIDI Devices (7 [MIDI] Terminals) Use the built-in [MIDI] terminals and standard MIDI cables to connect external MIDI devices. MIDI IN Receives MIDI messages from an external MIDI device. MIDI OUT Transmits MIDI messages generated by the instrument. MIDI THRU Simply relays the MIDI messages received at MIDI IN.
Connecting a Computer or USB Device The second connection possibility involves a separate, external MIDI interface connected to the computer via a USB port or a serial port (modem or printer terminal). Using standard MIDI cables, connect the MIDI OUT terminal of the external interface to the [MIDI IN] terminal of the instrument, and connect the [MIDI OUT] terminal of the instrument to the MIDI IN terminal of the interface.
Connecting a Computer or USB Device Copying files from a computer hard disk to a USB storage device Files contained on the hard disk of a computer can be transferred to the instrument by first copying them to the storage media, then connecting/inserting the media to the instrument. Not only files created on the instrument itself but also Standard MIDI files and Style File-formatted Style files created on other devices can be copied to a USB storage device from the hard disk of the computer.
Connecting a Computer or USB Device/What is MIDI Recording and play back the performance of a digital instrument (MIDI data) Recording Playback Tone Generator Sequencer Controller (keyboard, etc.) USB storage device USB storage device Finally, we’ll take a look at the actual data that gets recorded and that serves as the basis for playing the sounds. For example, let’s say you play a “C” quarter note using the grand piano sound on the instrument’s keyboard.
What is MIDI? Message Name Operation/Panel Setting Note ON/OFF Messages which are generated when the keyboard is played. Each message includes a specific note number which corresponds to the key which is pressed, plus a velocity value based on how hard the key is played. Program Change Control Change For selecting Voices (with control change bank select MSB/LSB settings) Volume, panpot (Mixing Console), etc. n The performance data of all Songs and Styles is handled as MIDI data.
What You Can Do With MIDI What You Can Do With MIDI ■ Record your performance data (1–16 channels) using the instrument’s auto accompaniment features on an external sequencer (or computer with sequencer software). After recording, edit the data with the sequencer, then play it back on the instrument.
MIDI Settings MIDI Settings In this section, you can make MIDI-related settings for the instrument. The instrument gives you a set of ten pre-programmed templates that let you instantly and easily reconfigure the instrument to match your particular MIDI application or external device. Also, you can edit the pre-programmed templates and save up to ten of your original templates to the USER display.
MIDI Settings Pre-Programmed MIDI Templates Template name Description All Parts Transmits all parts including the keyboard parts (RIGHT1, 2,and LEFT), with the exception of Song parts. KBD & STYLE Basically the same as “All Parts” with the exception of how keyboard parts are managed. The right-hand parts are handled as “UPPER” instead of RIGHT 1 and 2 and the left-hand part is handled as “LOWER.
MIDI Settings SYSTEM display MIDI System Settings The explanations here apply to the SYSTEM display to be called up in step 4 of the “Basic Operation” on page 200. ● START/STOP Determines whether incoming FA (start) and FC (stop) messages affect Song or Style playback. ■ MESSAGE SW ● SYS/EX. The “Tx” setting turns MIDI transmission of MIDI System Exclusive messages on or off.
MIDI Settings n When different parts are assigned to the same transmit channel If the same transmit channel is assigned to several different parts, the transmitted MIDI messages are merged to a single channel— resulting in unexpected sounds and possible glitches in the connected MIDI device. n About the protected Songs Write-protected Songs cannot be transmitted even if the proper Song channels 1–16 are set to be transmitted.
MIDI Settings CHORD DETECT display Setting the Chord Type for Style Playback via MIDI Receive The explanations here apply to the CHORD DETECT display to be called up in step 4 of the “Basic Operation” on page 200. These settings let you determine the chord type for Style playback, based on the note messages received via MIDI. The note on/off messages received at the channel(s) set to “ON” are recognized as the notes for detecting chords in Style playback.
Troubleshooting Overall The instrument does not turn on. • Securely insert the female plug into the socket on the instrument, and the male plug into a proper AC outlet. A click or pop is heard when the power is turned on or off. • Electrical current is being applied to the instrument. This is normal. Noise is heard from the instrument’s speakers. • Noise may be heard if a mobile phone is used near the instrument or if the phone is ringing.
Demo How can I stop the demo? • Press the [EXIT] button. Voice The Voice selected from the Voice Selection display does not sound. • Check whether or not the selected part is turned on (page 79). • To select the Voice for the right-hand key range, make sure the PART ON/OFF [DUAL (RIGHT2)]/[SPLIT (LEFT)] buttons are off. For the Voice to be layered in the righthand range, press the PART ON/OFF [DUAL (RIGHT2)] button.
Auto accompaniment chords are recognized regardless of the split point or where chords are played on the keyboard. • This is normal if the fingering mode is set to “Full Keyboard” or “AI Full Keyboard.” If either of these is selected, chords are recognized over the entire range of the keyboard, irrespective of the split point setting. If desired, select a different fingering mode (page 108). When playing back one Style and selecting another, the newly selected Style doesn’t play at the proper Tempo.
Song playback stops before the Song is finished. • The Guide function is turned on. (In this case, playback is “waiting” for the correct key to be played.) Press the [GUIDE] button to turn off the guide function. The lamps in the chord section of the keyboard light. • The Guide function for chords (page 50) has been enabled. Turn the Style off by pressing the [ACMP ON/ OFF] button. The Song last selected before turning off the power is no longer available.
Lyrics (Karaoke) Lyrics are not displayed. • If the selected Song does not contain lyric data, lyrics are not displayed. Some of the lyrics overlap each other. • This happens for Songs containing many lyrics. The Lyrics Background setting cannot be changed. • When the background color is specified in the song data, the Lyrics Background setting cannot be changed. Performance assistant technology Performance assistant technology does not work appropriately.
Removing the CGP-1000 from its Case and Assembling the Unit CAUTION • Be careful not to confuse parts, and be sure to install all parts in the correct orientation. Please assemble in accordance with the sequence given below. • Assembly should be carried out by at least four persons. • Be sure to use the correct screw size, as indicated below. Use of incorrect screws can damage the instrument. • Be sure to tighten all screws upon completing the assembly of each unit.
4 5 Remove the four base screws (and ONLY those screws) on the skid. Set a blanket at the left corner and slide the piano forward. 8 9 Attach and securely tighten the left front leg with the 70mm hexagon bolts. Remove the rear skid (with the wooden board). CAUTION 6 Set the piano upright. While removing the screws, make sure to have at least two other people securely hold this board and keep it from dropping. 10 Attach the pedal. Attach and securely tighten the screws.
11 Attach the pedal brace rods. ■ After completing the assembly, please check the following. • Are there any parts left over? → Review the assembly procedure and correct any errors. • Is the Clavinova clear of doors and other movable fixtures? → Move the Clavinova to an appropriate location. • Does the Clavinova make a rattling noise when you shake it? → Tighten all screws. • Is the power cord inserted securely into the sockets? → Check the connection.
Installing the Floppy Disk Drive (Optional) The floppy disk drive can be installed to the bottom of the instrument by using the included floppy disk drive case and screws. For a list of optional floppy disk drives available for this instrument, see “Optional Accessories” (page 215). Have a Phillips-head (+) screwdriver ready. 1 Remove the three backing papers from the adhesive tape in the case, and fit the floppy disk drive into the case.
Specifications CGP-1000 Sound Source AWM Dynamic Stereo Sampling NW (Natural Wood) with Synthetic ivory keytops (Wood is used for the white keys) Keyboard Number of keys 88 640 ✕ 480 dots VGA color 7.8 inch LCD Display Music Score, Lyrics, and Text YES Wallpaper Customize YES Polyphony (max) 128 + 128 590 voices + 480 XG Voices 19 Drum/SFX Kits + GM2 + GS (GS Voices for GS Song playback) Voice Selection Voice Natural! Voice 38 S.
CGP-1000 LAN Port, Wireless Game Adaptor (LAN Port), External Adaptor (via USB to DEVICE) Internet Direct Connection USB Flash Memory Memory Device YES Floppy Disk (2HD, 2DD) External Adaptor (via USB to DEVICE) Hard Disk External Adaptor (via USB to DEVICE) Flash Memory (Internal) Memory Card (SmartMedia, etc.) Tempo Range Tempo Metronome YES Buttons Regist.
Index Symbols E ® ................................................................................. 65 √ ................................................................................. 65 EDIT ........................................................................... 121 Edit (Bookmarks) ........................................................ 182 Edit (Effect) ................................................................... 93 Edit (EQ) .............................................................
Function display ........................................................... 27 GM System Level 1 .................................................... 199 GM System Level 2 .................................................... 199 GROOVE ................................................................... 124 GS .............................................................................. 199 Guide ......................................................................... 141 Guide Lamp .....................
Q QUANTIZE ................................................................ 126 Quick Recording ........................................................ 143 QUICK START ............................................................ 139 R RANDOM .................................................................. 138 Realtime Recording .................................................... 118 REC .............................................................................. 65 REC MODE ..........................
Panel Button Chart The position of the button on the panel can be confirmed by the Panel Control (page 12). Symbol M [–] [+] (TEMPO) ............................................................. 8 [–] [+] (TRANSPOSE) ..................................................... 6 MAIN VARIATION [A]/[B]/[C]/[D] .....................................C [MASTER VOLUME].............................................................3 [MEMORY] ............................................................................
The followings are the titles, credits and copyright notices for fifty seven (57) of the songs pre-installed in this instrument: Alfie Theme from the Paramount Picture ALFIE Words by Hal David Music by Burt Bacharach Copyright © 1966 (Renewed 1994) by Famous Music Corporation International Copyright Secured All Rights Reserved All Shook Up Words and Music by Otis Blackwell and Elvis Presley Copyright © 1957 by Shalimar Music Corporation Copyright Renewed and Assigned to Elvis Presley Music All Rights Admini
In The Mood By Joe Garland Copyright © 1939, 1960 Shapiro, Bernstein & Co., Inc., New York Copyright Renewed International Copyright Secured All Rights Reserved Used by Permission Moon River from the Paramount Picture BREAKFAST AT TIFFANY’S Words by Johnny Mercer Music by Henry Mancini Copyright © 1961 (Renewed 1989) by Famous Music Corporation International Copyright Secured All Rights Reserved Isn’t She Lovely Words and Music by Stevie Wonder © 1976 JOBETE MUSIC CO., INC.
(Sittin’ On) The Dock Of The Bay Words and Music by Steve Cropper and Otis Redding Copyright © 1968, 1975 IRVING MUSIC, INC. Copyright Renewed All Rights Reserved Used by Permission Smoke Gets In Your Eyes from ROBERTA Words by Otto Harbach Music by Jerome Kern © 1933 UNIVERSAL - POLYGRAM INTERNATIONAL PUBLISHING, INC. Copyright Renewed All Rights Reserved International Rights Secured. Not for broadcast transmission. DO NOT DUPLICATE. NOT FOR RENTAL.
IMPORTANT SAFETY INSTRUCTIONS INFORMATION RELATING TO PERSONAL INJURY, ELECTRICAL SHOCK, AND FIRE HAZARD POSSIBILITIES HAS BEEN INCLUDED IN THIS LIST. WARNING- When using any electrical or electronic product, basic precautions should always be followed. These precautions include, but are not limited to, the following: 1.
FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. NORTH AMERICA CANADA Yamaha Canada Music Ltd.
Clavinova Web site http://music.yamaha.com/homekeyboard Yamaha Manual Library http://www.yamaha.co.jp/manual/ U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation © 2007 Yamaha Corporation WH72810 806APAP3.
