i-.
CAUTION: 1 Read these instructions. ]_,lllllqL!l 2 Keep these instructions. RISKOFELECTRIC SHOCK DO NOTOPEN 3 Heed all warnings. 4 Follow all instructions. TO REDUCE THE RISK OF 5 Do not use this apparatus near water. 6 Clean only with dry cloth. ELECTRIC SHOCK, DO NOT REMOVE Do not block any ventilation openings, htstall in accordance with the ntanufacturer's instructions. COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
(DECLARATION OF CONFORMITY Responsible Party: Address: Telephone: Fax: T>pe of Equipment: Model Name: PROCEDURE) Yamaha Electronics Corporation, 6660 Orangethorpe Avmme Buena Park, CA 90620 U.S.A. 714-522-9105 714-670-0108 HDD/CD Recorder CDR-HDI500 This device complies with Part 15 of the FCC Rules.
•Toassure thefinest perfi)rmance, please read thismanual carelully. Keep itinasaiL' place lotfuture reference. • Install thisunitinawellventilated, cool, dU, clean place away fi'om direct sunlight, heat sources, vibrafion, dust, moisture, and/ or cold. Avoid ventilation space of at least 30 cm on the top, 20 cm on the left and right, aud 10 cm on the back of this unit. • Locate this unit away from other electrical appliances, motors, or translk)rmers to avoid humming sounds.
• Discsthatcan beusedfor recording on this unit Be sure tu ase onl_ CD-R and CD-RW discs made h3 reliahle mmmlacturers. CD-R and CD-RW digital audio discs that display either of the following marks can be used with this unit. • Discs that can be played back In addition to CD-R and CD-RW digital mldio discs descrihed previously, commercially available CDs bearing the marks shown below can also be played on this unit. If you use the CDs that do not meet CD standards, this unit may operate properly.
• Handling of discs Heed the following notes on handling cause for a recording failure, malfunction of this unit. of discs not to create a loss of the recorded any data, or a • This compact disc recorder is designed lot use with CDs (including 8cm [3"] discs) bearing the fl)llowing marks only. Never attempt to load any other type of disc into this unit.
FEATURES ...................................................................... ABOUT THIS MANUAL .................................................. Structure ................................................................................. About this manual .................................................................. SUPPLIED ACCESSORIES ............................................ NAMES OF BUTTONS AND CONTROLS ...................... 2 2 Front panel .................................................
• Beautiful design and easily-viewable fiont panel display • Supporting 10x speed HDD recording, • Supporting high-capacity • Long continuous • Digital (coaxial • Copying recording sounds with Audio display feature copying input source Master Quality to favorite Recording (when copying onto CD-R discs) tracks (Auto Play) and timer recording • Various edit menus and 4x speed CD-RW and analog input jacks feature for easy accesses • Timer playback • On-screen of external and optical
Make sure Ihefollowing items are included inyour package. • Remote Conlrol • Balteries (size AA, UM-3, or R6) (2) I'rl -"t '-I Z if) • Audio Pin Cables (2) _D D r, 171 _ACE _e_ • Optical Cable eD0_K MOaE _U J • Video Pin Cable ....... 6_5 _YAMAHA • Power Cable (lur U.S.A.
• Front panel 0 0 0 @ 0 0 @ ® POWER MULTI JOG knob/DIGITAL Turns on/off this unit (R 14). O Normally. press to switch between the GROUP and TRACK modes, and rotate to select a group (disc or album) or track. HDD In the menu screen, rotate to select items or at{just parameters, and press to decide. Sets the unit to the HDD operation mode (P.14). _) CDR _) Sets the unit to the C'DR drive operation mode (P. ]4). (]) O _) CLEAR Deletes the selected item or clears the setting.
_) ERASE Select items tu be erased when erasing data (track data or TOC) frun/a CD-RW disc (R48). _>/_ (Search/Skip) Press to skip to a next track and press and huhl to fastforward the current playback (R 19). INPUT m -I -I z o3 Switches input sources (OPTICAL, COAXIAL, and ANALOG) (R31). The lamp for the selected input lights up. _) E>/nn(Play/Pause) Starts pla}back uf the currently selected group or track. Pressing the button during playback stops the playback temporarily (R 19).
i _r,__LVjl::(_,"[o] ;li :tlJi I I_o]_ 6"ff,__ _ I i][o,,io] _ i / ;{o] _ _]_ /-" OPEN/CLOSE • Remote control Opens or closes the disc tray. COPY Sets the unit to the copy, standby mode. _]) A.M.Q.R. O[i_ Turns on/off the Audio Master Quality Recording (PAl, 46) when copying data onto a CD-R disc. i0 oq_i F_E_ _ i_I _]) FINALIZE Starts to fim_lize a CD-R or CD-RW disc (P.47). q[_ ERASE Select items to be erased when erasing data (track data or TOC) fi'om a CD-RW disc (R48).
_ V:ILV_l :_'-[e] _i :|lJl n (el _ g"lF:l _I el_e] _ / II;[el _; _) _/== (Play/Pause) Starts pla5 back of the currm_tly selected group or track. Pressing the button during playback stops the playback temporarily (R 19). In the copy or recording standby mode, press the button to start recording. m .-I -I z REC Sets the unit to the recording standby mode. _) TIMER REC Press the button when configuring the time [or timer recording (P.32).
• Display o O0 O HDD mark O TOTAL indicator oo 0 ® 0 0 ® O ® O@ 0 @ REP indicator Lights when the unit is in the HDD operation mode. Lights when the Repeal Play mode is turned on. When selecting the Single Repeal mode, "S REP" appears. RNDM indicator Lights when the total time (elapsed or remaining time) is displayed. _) Lights when the Random Play mode is turned on.
_ F:qLV_l::l,,'-[e] =i :llll n i[o]_ _'-]F:q_I e][_o] _ / iI;{e] _; • Rearpanel For details about HDD installation, other eomponems, reler Io "INSTALLING reler Io "CONNECTIONS" THE HDD" of the "HDD Installalion Manual". For details about how to connect ffa m -"t --I z if) (El0). o 0 0 r, m ]. 0 0 0 HDD slot Open the cover when replacing the HDD. O _) VIDEO OUT jacks O O DIGITAL jacks DIGITAL IN (COAXIAL) jack Inputs digital signals.
Turn ()If the power diagram beh)w uf this unit and tire uther compuuents, lu make connecliuns with pruper and unplug them from Ihe wall outlet belure making any cunnectiuns. Fulh)w the cables. Digital connections • To output signals from this ,((lit to an external component, connect DIGITAL OUT jack of this unit to tile digital input jack of tile external component.
Connecting a monitor You can display the list of groups or tracks to be played, copying/recoMing settings or the list of setting itmns/m the monitor to this unit. Connect the S VIDEO.jack or the VIDEO .jack whichever available on your monitor. tim monitor b} connecting m -I .-t z if) o0 Connecting the power cable [U.S.A. model] Phlg tim power cable into tim AC inlet when all connections [Europe, U.K. and Australia are complete, mid then plug ill the power cable to the wall outlet.
Once you have fi_'dshed all connections from a CD Io the HDD and listen to il! (In this procedure, we use a remote (RI0) control POWER and prepared Io operate the remote the unil although conlrel bultons (RI 1), please follow on the mill conlrol the procedure below to copy music il in the same way.) Disc tray Place a CD properly as aligned in the recess wilh its label side facing up.
:_,__"_ [e.Xo]:J ::1:F,_'III [o]_ F,_q m ;I II[olV_l CO °LI.............. ,,,1 ,,,= ,:,,= ,:,,= , , ,L u & ..,i .i ....... i ' m,,i, m,,i ,, =, ,, = ,L ,L (/) i {') REC 0.,, I.I 0.,= I.. , = I.I I, I, h.......... :'_; _:,i, :'_ 0 ,, HF Z {/} o = o,,= o,,= o , m,,i, m,,i ,,'_ o .h Now, please try various features of this unit! •To enjoy playback with Repeat Play, Random Play, Intro Play features "USEFUL PLAYBACK OPERATIONS" •To start playback automatically IP.
POWER Press POWER on the front panel. When the unit turns (m, the message "WELCOME TO YAMAHA HDD/CD SYSTEM" appears on the front panel display then the unit becomes ready to be operated. For inlormation on specifications to "SPECIFICATIONS" (P.83). This unit equips the HDD such as power consumption, and CDR drive. When operating refer • Do not turn off the unit during playback or recording. Doing so may damage the HDD or data.
When starling operate. playback The lypes (R 16) and "Data or recording, of group you need to select you can select on CDs" the group vary depending or track on the drives mode (HDD at first, and then select and CDR drive). an item (disc, album, For details, refer Io "Data track, elc) to on the HDD" (R 17). MULTI JOG W ENTER tJ_ i 0 Z O_ 1 • Press the MULTI JOG knob (ENTER on the remote control) to switch between the group and track mode.
• Data on the HDD The data recorded onto the built-in HDD of this trait will be numbered and organized based on the following concept: Bookmark Group A collection of disc(s), alhum(s), and a hookmark are generically called "group". Disc One consequent recording is counted and uumhered as one unit of disc. The HDD of this unit can record 999 discs at maximum. (However, the mlmber of discs to be created may be less than 999 for the space availability on the HDD.
_ 3 ! ::[Plil _ [ttl /: I:l[€l ;[slil "J(s];il / ;F;Ilt i!l LTffI]m] • Data on CDs You can operate CDs (including CD-R and CD-RW) set in the CDR drive by group (disc or bookmark) or track. Group Track When operating CDs (including CD-R and CD-RW), _ou cm] select disc or bookmark as a group. Since the unit can only read one disc at a time. the number of discs available on a CD is always one. lu addition, bookmarks on a CD will be erased if CD is removed from the unit or the unit is turned off.
The display located in the center of this unit provides the information about the drive (HDD or CDR drive) selected. Each time TEXT_IME is pressed, the display changes according to the operation. Display while playing the data on the HDD Display while playing a CD Group number, track number and elapsed time of the track being played Track number and elapsed time of the track being played .............I =..= =..= = = " =_..= =_..= .I. .I= .I. i ...... m,,i ,.
Follow the procedure below to carry out basic playback operations. This unit also provides various useful functions for playback. For details, refer to "USEFUL PLAYBACK OPERATIONS" (P.20-23). O0 numeric buttons or) i 0 MULTI JOG 0 - Cursor buttons _0 Z K_/_ _>/_ _/uu h_ "I" To start playback To skip tracks Alter selecting a group or track (P. 15), press _>/uu. To skip to heginuiug of the current track, press K
You can enjoy playback wilh various useful features with tiffs unil. • Searchingby elapsedtime (Time Search) • Setting the play style Only when playing sources recorded on the HDD, you car( set the play style. The play style setting changes the range of playback. You can search the desired parl by' setting the time. 1 • While the unit is in the HDD operation 1 • Press MODE to enter the playback mode setting. "Time Search" appears on the display. ,1 a,.,, .-,. ,...-,. -,. ; 2. 2. h,,..
_] ::1;l I I mB".,IW:\'dl:_:To.];.4Is]".,1::1;F:_liI [o]_ [.: • When random play is set, all tracks that belong to the selected group category are played in a random sequence. • When full repeat play is set, all tracks that belong to the selected group catego U are repeatedly played. • Repeatingplayback of a track (Single Repeat) • When intro play is set, the beginniugs of all tracks that belong to the selected group catego U are played one after another.
|ll,.'-I :l dll HI ".,IW;Vd :T;I_] [4[o] ".J:1 ;tr;'t a[o] __ • Repeatingplaybackof the selected group(Full Repeat) • Playingbackrandomly (RandomPlay) You can repeatedly listen to all tracks recorded in a group (or a CD) or group category. You car/listen 1 • Press MODE to enter the playback mode setting, then 1 • Press CD iI/a rotate the MULTI JOG knob (press +/-, • or • on the remote control) to display "Repeat". h., i", 2. remote :: Press the MULTI JOG knob (ENTER on the remote 2.
J-"]::1II1 II _ |,_VI :?,_IH [q[.l ".J:11_,_III [.10 _ • Playingbackonlythe beginning partsof tracks(Intro Play) You can listen to the beginnings time one alter ol the tracks for a sel amount of 0,notller. 1 • Press MODE to enter the playback mode setting, then rotate the MULTI JOG knob (press +/-, • or • on the remote control) to display "lntros Scan". ,l, ,i, } 2.
You can easily listen to a group of desired tracks by selecting a list ol tracks • Adding tracks to the bookmark list Press TRACK NO./BOOKMARK on the during playback of the desired indicator turns on. track remote until with bo()kmarks. • Removing tracks from the bookmark list control the MARK Press TRACK NO./BOOKMARK on the remote control during playback of the desired track until the MARK indicator turns off.
You can display' C(IlIleC iIl& he the list of groups n/oi]l or The unil does not output o or tracks 1(1be played, copying/recording seltings and the list of the selting items on the monitor by' his/lilit. video signals when "VIDEO Output" (R74) List of groups or tracks is sel to "Video OIP'. Tu use the OSD, select "Video On". Display during recording 00 The numbers tracks and titles ol groups, are displayed.
• Copyingall tracksona CD • In the HDD copy standby mode, you can specify the settings for HDD copy. For details, relier to "Setting the HDD copy mode" (P.28) and "Settings HDD copy menu" (P.29). You can copy all Iracks on a CD onto tile HDD. COPY • You can specil); a disc to where data is copied. For details, reler to "Selecting a target disc" (P.28). (When no disc is specified, the unit automatically selects the smallest disc number that does not contain any data.) P/ _' U . i =" I I =" I .-,.
_e] ".,k'l I_[etl;i ;[o]LIFZI[o,]ele] _/ I[o]l| -"I::i I I e]m • Copyingselected tracks on a CD You can copy your lavorile 4. Press _pD to start copying. The progress of the copy process is shown in the display. tracks on a CD onto the HDD. " ]I ='": = m'::i":=' =' = , '=' COPY 'J .L "fii 'J ,L 'j ='":,=' ='":= ,L _ PEC TRACK NO./BOOKMARK • It takes a few seconds lor this unit to become ready I(5 start copying afler _>/Dnhas been pressed.
iZ'_o] ".,,11,'I I _[=']1;I ;[o] Lv_ Nr,_Io.]00Xs]_II I_o]l II; I=11_ IH n • Selectinga targetdisc • Setting the HDD copy mode MULTI JOG In the HDD copy mode, you can specil}' the number of tracks to be copied on the HDD. Initial setting: All Synchro MODE MULTIJOG ENTER -GROUP SKIP buttons While this unit is in the HDD copy standby mode, rotate the MULTI JOG knob (press +/-, GROUP SKIP buttons, • or •) to select the disc number to where the data is copied.
O_ol_'ll_ 3. Press the MULTI JOG knob (ENTER on the remote control) to confirm the copying mode selected. If "All Syuchro" is confirmed, this unit returns to the HDD cupy standby mode. [_ _ ;[olLVlW_I_ eIe] Oin(o_ l II;i • Settingthe HDDcopymenu In the HDD cupy menu, you can set the cupy L/ 4. \ u.g bvIULT ,-,i u g -,m methud, cupy level, and cupy speed. If "Multi Synchro" is confirmed, the tbllowing message appears on the display. Go to step 4. u = H= lie] m MULTI JOG MENU .
I'o,lo] "x'dI _[cl =1;[o] Lv_ Nr,_la0,] 00Xe]_Ii i_o]l /; I=i _ IH n Copy Method Copy Speed Setting of the cop>ing method. Cop_ing may fail if the setting for "Copy Method" is not correctly made. Setting of the copsing speed. "'. u..g = u ..% ...._ *! C I C Initial setting: Best Ellklrt Initial setting: Digital Copy Best Effort Digital Copy This method always makes digital copies. Cop>ing is not possible if the tracks are copy protected by the SCMS standard (P.82).
• Recording input audio source You can m0.ke recordings This unil cannot fi'om Ihe component inpul digilal signals other such Ihan PCM as 0. cable TV luner or DVD player connecled Io this unil. signals. Recording onto tire HDD is made in tire unil called "disc". The maximum lenglh of one disc on life HDD is 179 minutes 59 seconds. If tire recording has been made exceeding Ihe maximum lenglh, the recording will be made continuously Io tire next available disc.
i ;|::[_e] ;| m]l_[el'_ ;Is] fi |,___ i::).'q I _ ;I _ V,__ l[_s] fil'.[s] _1_ _ i |s] _i_s| / :11 :lo]l • Using an external timer to record Notes on recording time setting • This unit is not equipped with the clock hmctiun. Use an external timer when making a timer recording. • It may take 30 seconds tu 1 minute al_er the power of this unit is turned on by an external timer ui_til an actual recording starts. (This length of time is sul_ject tu change depending uu the cuudition.
;t ::[_.] ;t ,]1_ [c'11;l'{e] ;_|;1 _ I ::Etlll::l'l _ I_I _.] M _e] _1_ _ i |.] _ / (._ | 111 II,]. Setting for a timer recording • You cannot set a timer recording lot CD-R and CD-RW copying. • You can skip to step 3 in the lollowing procedure by pressing TIMER REC on the remote conlroh .1MULTI dOG m 0 0 Z 0 ENTER REC 1. 2. Carry out steps 1 and 2 in "Recording Ka/_:::_ input audio For tile HDD recording mode (P.
i ;t ::[o[e];t m]I _[e]l '_;{o] Lv_ |,_1_ I ::).'q| _ ;I _ V,_Il[o[o] LT_I _O] _ I_ _ i |e] _ i (O| /: 11: I O]I • Adjusting the recording level There is an adjusting procedure for each inpul source to be recorded as explained below. Choose Ihe one for your input source and lollow Ihe steps.
;t =[_e] ;t H I _[€'11;I "Is] ;_|;1 _ I :).'q II=1"1_ r;l I[_s] • Setting the HDD recording mode 3. LT_I ".dis] _ I=1_ | |S] _ / I_S] 1 : 11 : I H n Press the MULTI JOG knob (ENTER on the remote control) to confirm the recording mode selected. 11"Manual", "Track Syuchro" or "All Synchro" is confirmed, this unit returns the HDD recording standby mode. This unit provides various recording modes. Choose the mode that suits your needs.
Setting a condition for synchronized Int.Time recording Sets the lengfll of silence ("no signal") that judges track intervals. When the set am(mot of silence continues, Ihis unit judges it as a Irack interval and places a Irack marker. This unit automatically detects track intervals when recording is made in track-synchronized recording mode, multi-synchronized recording mode, or all-synchronized recording mode. You can set the condition for detecting track intervals. Setting items are as follows.
;t :[_[o] ;t m]l_[_11'_;[o]LV_|,_l _i:).'q I _ ;I _ r,__![o[o] M ".[o]_1_ _ i |o] _i_ol 1:11:1o] n • Adding track markers during recording (Manual track marking) TRACK NO,/BOOKMARK TRACK WRITE NO. -r C_ ITI 0 0 Z 0 This unit can automatically place track markers. However you can also manually place track markers during recoMing. (Manual track marking) Press TRACK NO./BOOKMARK (TRACK NO. WRITE on the remote control) during your recording.
• Copyingall tracks in a groupto a disc You can copy all tracks in a whole group ol discs, COPY albums or bookmark list. MULTI JOG 1%- FINALIZE m,-Iml _/Hu GROUP SKIP buttons 1 • Set a new or not finalized CD-R (or CD-RW) disc in the disc tray. 2. The following message appears on the display, and this unit enters in the CDR copy standby mode. Copying has not been started yet at this stage.
g,Io]".i'll _ [el i llo] LviII / l 1:111H mlo] _ / lo]f,_|d roll I_LH ml ltU| H _D When a disc is selected: \ - /i / /" "_' :::i h,i ,y \ When \_ ...... /, 'g ,W, • If copying is canceled by pressing D only the data that has been recorded on the CD_R or CD-RW disc belore the m'::i,m'::i m'::i2 _* REC u:,H:j u:j q_ .. an album ]h,iu:j When 'J ' _ u,, u.I ,. / \:r:_I_ cancellation remains on the disc. When "Digital Move" (P.
• Copyingselected tracks on the HDD Yuu can copy lavurite tracks on the HDD lu a CD-R COPY ur CD-RW disc. MULTIJOG _--/nz FINALIZE _/Hu GROUP SKIP buttons '1. Set a new or not finalized CD-R (or CD-RW) disc in the disc tray, then select the HDD and add bookmarks to favorite tracks (P.24). The OPC (Optimum Power Control) li:ature may start automatically depending uu disc conditions.
_o] ...,i,'dl I_ [_'-11 ;I;;[o]Lv_ Ii iI-"I=11-"I0o]0o][o]_ Ii i[oY,_I_ ml ;_L_ ml ;tv_v|m]_[ n • Copyinghigh quality sounds (Audio Master Quality Recording) You can make your own CD ;i 11high quah y sound wi h he Audio Maser Quali y Recording feature. • Audio Master Quality Recording can be used only for copying lhom the HDD on a new CD-R disc. • Recordable time is 63 minutes lor a 74-minute CD-R disc, and 68 minutes lbr a 79-minute CD-R disc.
• Setting the CDR copy mode In the CDR copy mode, you can specil)' the mnnber ul tracks tu be copied un the HDD ur enable/disable the auto-finalizatiun feature. Initial setting: All Synchro MODE MU_IJOG MODE-A 1 • Press MODE while this unit is in the CDR copy 2. 4, Rotate the MULTI JOG knob (press +/-, • or • on the remote control) to select the number of tracks. Rotate the MULTI JOG knob (press +/-, • or • on the The munher can he selected in the 1 to 99 tracks range. _.
PIo]"a'lI_[tll ;I;{o]L,_ II II-"I=11 -"I=]=][o]_III_o]f__I0.] m]H ;_IH =I ;tv_v|=]_[n Copy Method • Setting the CDR copy menu In the CDR copy copy and imaging speed, menu. you can set the copy method, copy leveh Setting ol the copying method. Copying may tail 11the setting for "Copy Method" is not correctly made. speed. MULTI JOG =..,' =.,.= r' MENU Initial setting: Analog Analog 23 i I =;;=' % i i =..,= =..,I %_ Copy Copy This method alwa>s makes analog copies.
Eo.lo] "..,]k'l I _[€-ll ;I ;[o] Lv_ II II -"I =11 -"100] ml[o] _ III_o1_|_ ml ;_L_ ml ;_v_v|H _o Copy Level Copy Speed Setting of the sound level for cop_ing. So/uld level adjustment is not normally necessary. However it is possible to adjust the copying sound level to suit you needs. Setting of the copying speed. : = ' =,,,= F' :::= ....
This unil equips the Duplicale leamre flint enables lu creale a copy CD easily and quickly. Duplication HDD may nul cerreclly ilrst, then perform made "Digital on a CD-R Muve" or CD-RW un a CD-R COPY disc that dues or CD-RW not supporl high speed writing. In this case, copy a CD onle the disc at 4x speed. _/uu O 9 3_ o O 1. Set the original CD in the disc tray. 3. This unit slarls reading the iuformatiun (lype and CD) when a CD is loaded.
New recordings cannot be added to a CD-R or CD-RW disc on which some tracks have heen previously recorded. r "I _:::= _. ='. ="'=,=1= .".." .". h". =1 ,"a = " = '= =1 h", . .... ="1 = _ = H. ," i t The OPC (Optimum Power Control) feature may start automatically depending on disc conditions. In this case, the message "OPC Adjust" appears on the display until the a([justment is done (about 10 seconds) before the copy process starts.
Finalization is the process that concludes recoMing, and allows a CD-R disc to be played on a standard CD player or a CD-RW disc to be phlyed on a CD-RW-compatible phlyer. n_/ll FINALIZE O _/Hu 9 9 1 • Set a not-finalized CD-R or CD-RW disc in the disc tray. 2. Press FINALIZE. The confirmation message appears on the displa>. • Further recording is not possible onto a finalized CD-R disc. Make sure that all recordings have been completed befl_re finalization.
You can erase the data recorded on a CD-RW disc. New recordings can be made in tile space created by erasing. Tile fi)llowing four lypes of erasing are possible with this unit. ERASE u_Imi ERASE _/uu • Erasing last tracks • Erasing all tracks This operation erases the last track on a disc. "Last Track Erase" cannot be perfornled if a CD-RW disc has been finalized, or only one track has been recorded on the disc. This operation erases all tracks recorded on a CD-RW disc.
1 II,_I,.'t I 1[Ill il,_l t,_|1] l_II,_|lt ill; tTl_| i| I:I i • Initializing a CD-RW disc This operation inilializes a CD-RW disc. 1 • Set a CD-RW disc in the disc tray, then press and hold ERASE for about two seconds, "Erase Disc ?" appears on the display. E7 h-. -..- .-. F', 4 .- .- 'D -'_ To cancel erasing, press D. 2. Press _pD to start erasing. "Erasing" llashes on the display, and the level reeler shows the erasing progress (Ihe process lakes aboul 20 minutes).
In the edit menu. you can edit album, track, and disc data stored in the HDD. Please select the me]m listed below for any purpose. Also, the Undo ligature enables to cancel the last edit operation.
. _-"]1II[o] ;11::1m]i/I LM::1_II • Enteringcharactersin the edit menu Entering the title characters by using the MULTI JOG knob 1. Rotate the MULTI JOG knob. When the MULTI JOG knob is rotated clockwise, characters appear in the order of alphabetical capital letters, alphabetical lower case letters, numbers, and symbols. 2. Press the MULTI JOG knob to confirm the selected character. The cursor moves to the next space. Repeat steps l and 2 until the title is complete.
You can select the desired tracks from among tile ones recoMed on tile HDD and store them as an album in this unit's memory. You can also edit the album afterwards. -MENU COMPLETE MULTI JOG MENU ENTER KJ/_ CLEAR 1 • Press MENU while the HDD is selected (P.14). Tile display changes for tile menu item selection. :: j =..,= = = = =.= =.= = = = = Album New You cml create a new alhum hy selecting the desired tracks from among the ones recorded on the HDD. =. 1 • If "Album 2.
=1'11 Ililq'i_II=l'lh'l_ 6. • You can switch the display by pressing TEXT/TIME (R 18) while an album is being enade: If the title is assigned to the suurce disc ur track, the title appears. By pressing TEXT/TIME while the title is being displayed, the total time of the album being enade appears fur approximately one second, and the display returns to the one in step 1.
m ::i|] / ill _ [€'IF,_1ill :tlJ LT_ [_ Album Copy Album Rename You can copy the entire disc. alhun/, or bookmark to a new alhun/. YOH 1. 1 • If "Album If "Album Copy" is selected (P.52), the following screen appears. ., Call ill(we [he alb/lln and assigll a ilew n/ll]lher. Rename" is selected (P.52), the following screen appears. =., \,,., c.,F::' - \ ,=/,.,. ......'' ' :" =,, =.. = = ,-= =,= =.... i h'= h'= / = ,' I =:'= =:"= .m.I : \ Group to be copied from 2.
=1,11 II_lq'i_nl=l'lh'# Album Delete Album Pack You can delete an existing album. 'Yi)u can re-urganize the al/mm lmmhers hy elimir_ating unused album numbers that have been crealed by changing album mnnbers or deleliug albmns. 1 • If "Album Delete" is selected (P.52), the following screen appears. 1 • If "Album . -] a/ Pack" is selected (P.52), the following screen appears. ;:= : = ':::i =..
i =i |] / ill _ [€tF,_I ill :ill iM_ Track Shuffle Track Level You can change tire oMer of tracks in an alhum. You can adjust the sound level of mlck in an album. 1 • If "Track 1 • If "Track Shuffle" is selected (P.52), the following screen appears. Level" is selected (P.52), the following screen appears. Track number Track to adjust its level / .... I I I I,I I I I [ iii ? I : :, = ......
:l']lllfi_i_'l=l'ihW Tr. lnterval • The level may change slightly out of the point that the track itself changes during the playback of the album with its tracks' level a{[justed. In this case, add the l-to-2 second interval using the "Tr. Interval" flmction (at right). 'Y2)ucan insert an interval 611the begim/ing of the selected track of 6/11 1. album. If "Tr. Interval" is selected (P.52), the following appears.
You can do various editing operations (1i/the tracks that have been recorded on the HDD. -MENU COMPLETE MULTI dOG MENU ENTER KJ/E>_ 1 • Press MENU while the HDD is selected CLEAR (P.14). The display changes lor the menu item seleclion. 2. Rotate the MULTI JOG knob (press +/-, • or • on the remote control) to select "Track = i h,,. -,..,,, i ':::i L..' =., r,. h..,,a L... L.J ,= .L Track Rename You can move a track and assign a new number.
=1,1| | I_[_"t[III;_al_lJig 6. 7. Rotate the MULTI JOG knob (press +/- on the remote control) to select the new track number. 11there is no track before the track that is selected and Press the MULTI JOG knob (ENTER on the remote confirmed, "No Previous" appears on the display, and this unit relurns to slep 4. (If the edit menu is selected during playback, the mill cancels the edil operation.) control) to confirm the new track number. Press CLEAR to cancel the conlirn/ed selection. 8.
I d I1 / i I _ [ill I ;F:lo] [_.: Track Erase Part Erase You can erase a selected track. You can erase part of a selected track. 1 • If "Track 1 • If "Part Erase" is selected (P.58), the following Erase" is selected (P.58), the following screen appears. Disc that contains the track to be erased .......... :iii. u:::, ..... Im"_f'g ,:, 'U, /=:..= i" .I\ Disc that contains the track to be partially erased '1 ":= [2_J : i::: ....... .......i.
::1,1| III _[ell II ;_,__=.] [_ 7, Press MULTI JOG knob (ENTER on the remote control) to confirm the beginning point of the partial erase. The passage helween the temporary ending point of Ihe partial erase (the point that is l0 seconds after the begioning point) and the point that is 5 seconds after the temporary ending point is repeatedly played. Ending point of the partial erase k,= :,,' D To change the ending point, press CLEAR once to return to step 8.
II d I| / i I _ [ill I :F:To] [_.: Track Combine YOU can comhine 1 • If "Track a series of trocks into • When combining a series of tracks, the selected track numbers following the selected first track will be available lor furore use. one. Combine" is selected (P.58), the following screen appears. Disc that contains the first track to be combined ...... I?._u::_.(I .i .":, = = ' =...=i'I k.= _= =:..= =:.= .L\ [_ : Track to be the first in the combination 2.
::1H | III _[ell II ;_,_l=.]_ 6. Rotate the MULTI JOG knob (press +/- on the remote control) to specify the dividing point. The dividing point can he set hy "minute: second: lrmne'. The unit to be set is flashing. Move the flash to the unit to be set by pressing K>/>'_ (<< or _ on the remote control). Track Pack You cm_ re-organize tile track numbers by eliminating unused track numbers, Ihal have been created by, changing Irack numbers or erasing tracks.
II d II / i I _ [t'i I ;F:To] [_.: Add Fade In Yoa can add fade-in at the begimling ol a track. The beginning of the track is played with gradually rising level when fadedn has been added. 1. If "Add Fade screen appears. In" is selected (P.58), the following Disc that contains the track to add fade-in • Fade-in cannot be added to a track that is shorter than 21 seconds. • The lade-in effect becomes inefl_:ctive if the following editing is perlormed to the track which the fade-in is added to.
:::1,1 | | I_[_"t[III;_al_lJig 6, Rotate MULTI JOG knob (+/- on the remote control) to set the fade-out length. Tile fade-out length can be sel in the I to 10 second range hy lsecond steps. Track Title You can assign a title to a track. 1 • If "Track Title" is selected (P.58), the following If you stop totaling the MULTI JOG knob, this unit starts repeated playback of the ending ol the track with a fade
You can do various editing operations on the discs COMPLETE Ihal have been recorded MULTI JOG on the HDD. MENU -MENU ENTER COMPLETE- "F,---- CLEAR 1 • Press MENU while the HDD is selected (P.14). The display changes for the menu item selection. 2. Rotate the MULTI JOG knob (press +/-, • or • on the remote control) to select "Disc Edit". i,." J. .:::' =..,' i..,. =..,i J. =.
=I,]III_I'I,IFPI _ Disc Rename Disc Erase Y_)ucan move a disc and assign a new nmnber. Y-oucan erase a selected disc. 1 • If "Disc 1 • If "Disc Rename" is selected (P.66), the following screen appears. ...... \ ,..., j.,. 0" 0:2' i i '::a Erase" is selected (P.66), the following screen appears. m'I 0:2' ,=/,.... 0:..= 0:..= .i. l iiiiic:i............. m ..... : ,..4 '..., \ ,,.,. ,...,, ,=/,,., b.
Disc Combine YOII can combine Disc Divide a series of discs hllo You can divide a disc inlo two at the selected point. one. 1 • If "Disc Combine" is selected (P.66), the following 1 • If "Disc screen appears. Divide" is selected (P.66), the following screen appears. \ i -I / " I : ' I ..d - =,. .................... : ;'*...."'*"/"":.• = = m...: I=L= =:.,= .L I c;_cF 7 If the edit menu is selected during playhack, the unit automalically selecls the ilem to be edited.
:I']IIR['t'IFPf Disc Pack Disc TRIo _/L)/1c_lnre-organize the disc numbers hy eliminating unused disc numbers thai have been created by, changing disc numbers or erasing discs. Yi/u can assign a title to a recorded disc. l • If "Disc Pack" is selected (P.66), the following I i If ""Disc Title" is selected " = ......... ........ ;,,,, ,,,, =,,1 =,,1 = ....,"_ ,,,, L, =,,,, D, screen screen appears. • (P.66), the following appears. .=, =., .e. =:::' a ,,,,. = i ,' i=:.= =:,.= .=.
You can cancel 0.n operation and the result ol 0. previous editing step on this unit (Undo MULTI JOG fuuction). MENU -MENU ENTER COMPLETE 1 • Press MENU while this unit is in the stop mode. 2, Rotate the MULTI JOG knob (press +/-, • or • on the remote control) to select "Undo". n,= _' _ n,i • The undo lm]ctiou does not apply to '+Track Level" or "Tr+ Interval" in the Alhun] Edit menu and "Add Fade In" or "Add Fade Out" in the Track Edit menu because it car] be canceled at any time.
This unil has Ihe digilal-analog fron/the input jacks) com/erler fi'om the bolh digital COMPLETE (DAC) mode. (OPTICAL MULTI JOG When the DAC and COAXIAL) mode is lumed and analog on, Ihc unit oulputs audio sources (audio signals input (ANALOG)jacks. MENU COMPLETE INPUT INPUT ANALOG D REC LEVEL _/un 1 • Press MENU while this unit is in the stop mode. 4, COAXIAL, or ANALOG). The display changes for the menu item selection. 2.
• CheckingHDDinformation (HDD Info.) You can check the HDD utility (capacity, usage, and available space) of lhis unit. • Formatting the HDD (HDD Format) You can format the HDD in this unit. • After tile HDD has been form0.lted, all data about tile recorded tracks and settings will be erased lrom the HDD. 1 • Press MENU while this unit is in the stop mode. The display changes lot the metal item selection. 2. Rotate the MULTI JOG knob (press +/-, • or • on the remote control) to select "HDD Utility".
• Checkingthe firmwareversion (Firm. Version) Soflware that is called firmware controls firmware version 1. Press 2. check The following steps describe stop mode. Ihe procedures. while changes You can initialize the settings that have been changed. The OPC data stored in this unit is also initialized. is built inlo this unit. This Ihe operation.
• Settingthedisplaybrightness (DimmerSetup) • Settingthe videooutput (VIDEOOutput) You can change Ihe brightness of the display. You can switch the on-screen display output through the VIDEO OUT jacks en and off. 1 • Carry out steps 1 to 3 in "Checking version (Firm. Version)" (P.73). the firmware 1 • Carry out steps 1 to 3 in "Checking The display changes lor the system ulili U item selection. 2. The display claanges for the syslem utility item selection.
ll'i-ll=h'll,lll+ll • Startingplaybackautomatically (AutoPlay) • Updating the firmware version You can set the auto play fuucti(m which autonmtically starts playback when the power of tiffs mill is turned uu. Using an external timer with this feature enables timer playback. This menu is prepared lor the expausiun uf the functions in the future. 1. Carry out steps 1 to 3 in "Checking ' (Firm.Update) the firmware version (Firm. Version)" (P.73).
Ifthisunitfailstooperate normally, check thelollowing points todetermine whether thefault can becorrected bythesimple measures suggested. If they cannot becorrected, orifthelimitisnotlisted intheSYMPTOM column, disconnect thepower cord and contact your authorized YAMAHA dealer orservice center lorassistance. SYMPTOM CAUSE REMEDY This unit does not turn on when POWER is pressed. The power cable is not completely connected. Securely connect the power cable (P. 10).
/ -'[eliJ SYMPTOM CAUSE :| liB:_,,,_-"[oIo]l i J_ [_ REMEDY This unit does not operate properly, The internal microcomputer has hecu frozen. Turn oil the power of this unit and then turn on again after about one minute (P. 14). There is rotation noise of the l_m. The tmnperature inside this unit rises. The lan starts to rotate to cool oll the temperature this unit. A noise occurs at the change of the tracks that has been recorded from the analog record and edited.
Can't Copy Format This message is displayed lk/r approximately 3 seconds when digital recording or copying is not possible according to the SCMS standard. This message confirms starting the lbrmat of the HDD after "Initialize ?" appears. Refer to "Rules of Digital Recording" (R82). Can't Edit This message is displayed when a prohihited editing operation has been attempted. Can't Tr.Lev. Tile alhaul with its tracks' level adjusted is to he copied to a CD-R disc in the Audio Master Quality Recording mode.
Reading This unit reads the lbrmat of the CD, CD-R, or CD-RW disc loaded on the disc tray. Approximately 10 to 20 seconds may be required to complete this automatic adjustment. However, this time length may change according tu the type uf the CD, CD-R, or CD-RW disc that has been loaded. Standby This message is displayed lor several seconds after REC has been pressed to recurd un a CD-R or CD-RW disc.
The following explains key terms used in this manuah Album Finalize An album is a unit used while playing back or recording audio signals on this unit. For detailed inlormation, see "Data on the HDD" (RI6). Finalize is a process to enable audio data recorded onto CD_R/RW discs to be played back on CD players or other CD-RW compatible devices. An audio disc created on this unit must be finalized to be played back on other playback devices.
You can make the lk311owingoperations on this tmit's system menu according to your needs. Menu Album New Edit Stored Menu content Page Edits the albums on the HDD. For detailed information on each menu, see "LIST OF EDIT MENU" (P.50) or "EDITING ALBUMS" (P.52-57). 52-57 Edits the tracks on the HDD. For detailed information on each menu, see "LIST OF EDIT MENU" (P.50) or "EDITING TRACKS" (P.58-65). 58-65 Edits the discs on the HDD. For detailed inli_rmation on each menu, see "LIST OF EDIT MENU" (P.
• Rules of digital recording • Notes on system SCMS (Serial Copy Management System) Number and length of recordable discs and tracks As u digital umlio componmlt, this unit conlorms with tile Serial Copy Management Systmn (SCMS) standards. The Serial Copy Mauagelnent Systmn restricts copies made by recording digital signals to first-generation copies only. The digital program sources that have been recorded cannot be digitally recorded again.
Audio Performance Outputs Frequenc_ response .................................... 5 to 20,000 Hz, +0.5 dB ANAL()(; LINE OUT (PLAY) Type ............................................................................... Pin jack Standard output level (1 kHz. 0 dB) ..................... 2.0+0.5 Vrms S/N ratio (EIAJ) Playback ......................................................................... Recording .........................................................................
f ..................................................................................................................................................... CAUTION Use of controls or adjustments procedures or performance other than those specified result in hazardous radiation of herein may exposure. ATTENTION L'emploi de commandes, procedures de reglages ou un choix de differents des specifications brochure peut entra_ner une exposition de cette a d'eventueNes radiations pouvant _tre dangereses.
