IMPORTANTSAFETYINSTRUCTIONS i_fJl[_ RISKOF ELECTRICSHOCK DO NOT OPEN CAUTION: TO REDUCE THE RiSK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. • Explanation 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus 6 Clean only with dry cloth. 7 Do not block any ventilation openings.
FCCINFORMATION (for UScustomersonly) 1. IMPORTANT NOTICE: DO NOT MODIFYTHIS UNITT This product, When instaIled as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. 3. Compliance with FCC regulations does not guarantee that interference wiI1 not occur in aI1 installations.
SPECIAL • To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. • Install this unit in a well ventilated, cool, dry, clean place with at least 30cm on the top, 20cm on the right and left, and 10cm at the back of this unit for ventilation space - away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. • Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.
Introduction Thank you for purchasing this YAMAHA product. We hope it will give you many years of trouble-free enjoyment. For the best pertormance, read this manual carefully. It will guide you in operating your YAMAHA product. Features • Copying a CD to the HDD at mmdmum 10x speed This unit has a built-in • Copying data on the HDD to a CD-R disc at maximum 8x speed that makes a long-hour recording possible.
• Discs that can be used for recording on this unit Be sure to use only CD-R and CD-RW discs made by reliable manufacturers. CD_R and CD_RW digital audio discs that display either of the following m_xks can be used with this unit. DIGITALAUDIO DIGITALAUDIO i=lmmmmlmB IReWritablel • FOR CONSUMER USE FOR MUSIC USE ONLY Discs that can be used for recording • CD-RW discs can be recorded on, have the recorded material erased, and then recorded on again any number of times.
I] _-'_l_*l • Handling of discs Heed the following notes on handling of discs not to create any cause for a recording failure, a loss of the recorded data, or a malfunction of this unit. • This compact disc recorder is designed for use with CDs (including 8cm [3"1 discs) bearing_ the ___D'_ r_,_D'_ ii,_D"_ or marks only. Never attempt to load any other type of disc into this unit.
SuppliedAccessories After unpacking, make sure the following items are included in your package. • Remote Control • Batteries (size AA, UM-3, or R6) (2) v---q v---q v---q v---q v---q c--n r----n • RCA Pin Cables (2) r=n-r=n [_ [_ • Optical Fiber Cable r---n r---n r---n r---n r---n r---n r-'-n.......
iJit_tili[itiP _ RemoteControl • If operation of this unit by the remote control creates any malfunction in any other components, change the placement of the component, • Do not spill any liquid on or drop the remote control. Do not place it near a heater or in the bathroom Where the temperature and humidity t_come high, • Make sure the remote control sensor is not exposed to direct sunlight or strong lights. If it is, it may not function correctly.
I ".l:t ::1_zl :t'z'nl[el_ Connections Turn off the power of this unit and the other components, and unplug them from the wall outlet before making any connections. • Correctly connect the input and output jacks on this unit to the input and output jacks on the other components. • Arrow marks (--_)in the il]ustration below indicate the direction of the audio signal. * This connector is used for an examination in the factory. LINE OUT (PLAY)jacks ......
FrontPanel I I ,°?o? I,) @ __ AM 0 II E D [I _ POWER ............................................................................. R ]3 _) CLEAR HDD _) PHONES jack ................................................................... R 58 CDR _) PHONES LEVEL control ................................................. R 58 _]_ COPY ..................................................................... P. 23, 25, 27 Front panel display .........................................................
i[_o] _.i t ;{el I(_.'IL, I _.I o] ;LI|_,[q l Is]__ RemoteControl OPEN/CLOSE COPY ..................................................................... R 23, 25, 27 FINALIZE .......................................................................... R 19 O _) @ @ O #_0 _:_/_T MENU @ CLEAR @ ® ERASE .............................................................................. R 5] TEXT/TIME .......................................................................
•_o]li lifO]_.'L'I_l,] _lJ_[qi[o]lj: Display O l 0 O O e e ,-, ,,,,, ,,,,, ,,,,, _- mill U|m mR null cue Ha U|m UU nell . :".. _r_,i REC i :...:,:...:,:...:,:...:,:...:,:...:,:...:,:...:,:...:,_:::_, _:::_: _:::_, NWn SeW nm IlUIIII _ _,,_,_ , _ IqqqACK_ HDD mark O Recording mode indicator ............................................
Group title or track title DisplayInformation Group title (or CD TEXT) The display located in the center of this unit provides the inforn]ation about the drive (HDD or CDR drive) selected. • Display during playback Each time TEXT/TIME is pressed, the display changes as follows: Group number, track number and elapsed time of the L_I ij E I::i"i" ...,'-" I::i";_, i"lE Track title (or CD TEXT) F:_;_,I D E I::iN [) ...
Rulesof DigitalRecording NotesonSystem • SCMS---Serial Copy Management System As a digital audio component, this unit conforms with the Serial Copy Management System (SCMS) standards. The Serial Copy Management System restricts copies made by recording digital signals to first-generation copies only. The digital Fogram sources that have been recorded cannot be digitally recorded again.
• Data on the HDD The data recorded onto the built-in HDD of this unit will be numbered and organized based on the following concept: Disc Bookmark One consequent recording is counted and numbered as one unit of disc. The HDD of this unit can record 999 discs at maximum. This unit can make a temporary bookmaxk on a favorite track as playing back. The list of the program sources marked is called "bookmark". This marking is temporary and cannot b_ duplicated.
UsableRecordingMedia The media hard used for recording disk drive (HDD) CD&,W disc). Choose Whichever HDD is convenient to make recorded tracks afterwards. A CD-R another and CD-RW CD player and copying or a compact BeforeStartingto RecordandCopy with this unit are the disc for recording (a CD-R or suits your needs. a long recording, disc can be used to make and to edit the an original CD that can play.
This section describes the basic recording operation. The operation steps are explained by using the buttons on the front panel and the remote control. Recordingfroman ExternalComponentontothe HDD 8 9 8 8 2 1 • Press BEC. 7, The HDD mark flashes, and the disc and track numbers to be recorded are indicated on the display. Recording has not been started yet at this stage. (Recording pause mode) 8, Start playing the source. Press _>_D(;D on the remote control) to stop recording temporarily.
Recordingfroman ExternalComponentontoa CD-Ror CD-RWDisc 2 1 • Press _ (OPEN/CLOSE open the disc tray. 2• 1 3 on the remote control) to Load a new CD-R or CD-RW disc, or a CD-R or CDRW disc without finalization on the disc tray. Place the CD-R or CD-RW disc correctly aligned in the recessed area of the disc tray with its recordable side facing down.
7 8 5, 7 7 2 Press This REC. 5, unit automatically disc reflection OPC for optimal (Optimum seconds adjusts Power the laser strength recording. against This process Calibration) and takes the Start recording. Press _>i_D (_>or _Don the remote control) to start recording, is called approximately 15 .L to complete. The following message 0P'" appears '-" ,.. "Standby" that flashes \ '- " " _' _ rl (::J..ii,...
:liH [q ;t=c_,1 ;t,Jl_=_,l-a=;__._ =t,l_' 9, Perform finalization completed. when all recordings have been See page 19 for the finalization procedure. IMPORTANT • Never turn off"the power of this unit during recording. Recording may not be correctly made, or the CD-R or CD-RW disc may be damaged.
3, Rotate the MULTI JOG knob (press +/- on the remote control) to adjust the recording level. • When recording an analog input source Adjustment is possible in the -12dB to +12dB range by 0.4dB steps. When the level is set to a value other than 0dB, the VAR 2 indicator lights on the display. L_ R _ GROUP CD_RW VAR 1 • Play the loudest passage (highest sound level) of the source to be recorded.
:liH_q :t:(_el:t.]lm[el=_:__,_ =tell' The level meter shows the finalization progress on the display. Finalization GROUP Finalization CD-R is the process disc to be played can only be played finalization a standard that concludes on a standard recording, CD player. on a CD-R_,¥_compatible has been completed. CD-RW (CD-RW player discs and allows CD=R a discs When starting finalization even after cannot be played on CD player.
Selectinga Discfor Recording Settingthe RecordingMode MULTIJOG GROUP SKIP <_ MODEISET MULTIJOG GROUP SKIP _'_ This unit provides various recording modes. Choose the one that suits your needs. 1 • Press MODE/SET while this unit is in the recording When recording onto the HDD, you can select the disc on the HDD for your recording.
• Auto Period (Auto-period recording mode) This mode makes recording for the set amount of time while placing track markers at the set time interval. The length between track markers can be adjusted in the 10 seconds to 30 minutes range by 10-second steps. This mode is convenient to search for material recorded from FM broadcasts. 3, Press the MULTI JOG knob (ENTER on the remote control) to confirm the recording mode selected. Further settings are necessary if "Multi Sync" or "Auto Period" is selected.
This section descrit_s the basic copying operation. The operation steps are explained by using the buttons on the front panel and the remote control. Copyingfrom a CDontothe HDD 2 1 3 15 1 • Press _ (OPEN/CLOSE open the disc tray. 2, on the remote control) to When display Load the CD to record from on the disc tray. Press _ (OPEN/CLOSE close the disc tray. on the • The disc tray can be also closed remote ff the disc tray is closed unit starts of a CD.
:i_'i__l_Io) -,i'dI_.Ettlo)-,1:1;L,'nlto]_ 3 2 4 2 4 6 6 1 • Press COPY once. _, The following message appears on the display, and this unit enters the copy standby mode. Copying has not been started yet at this stage. x •.,q 8 8 ..._,7i ..,q .,._ _ r_3i: r=q:lffF _ ! ...Y a. ,::_1. ,::_1 ,:: • It takes a few seconds tbr this unit to t_come ready to start copying after _>iED(c> on the remote control) has t_en pressed. p\ • This unit may create some vibration and rotati
I "?:!-'l [l'I_l] ".i'dI_,|_[I] :1:1;_:_| tl_i Copyingfromthe HDDontoa CD-Ror CD-RWDisc 2 I 3 15 1 • Press _ (OPEN/CLOSE on the remote control) to When reading the disc information has been completed, the display changes as follows, and this unit becomes ready for copying operation. open the disc tray. 2, Load a new CD-R or CD-RW disc, or a CD-R or CDRW disc without finalization on the disc tray.
2 3 4 5 4 7 7 5 6 • OPC may start on the loaded disc depending on its recording condition. It takes approximately 15 seconds to complete the adjustment. • This unit can make a high-speed copy onto a CD-R or CD-RW disc. However there are some audio CD_R or CD_RW discs that do not support high speed writing. To copy onto these discs, lower the copy speed. (See "Copy Speed" on page 30.
Duplication of a CD 2 1 3 15 1 • Press _ (OPEN/CLOSE on the remote control) to open the disc tray. 2, Load the CD to duplicate on the disc tray. Place the e_D correctly aligned in the recessed area of the disc tray with its label side facing up. When reading about the disc information has been completed, the following message appears on the display, and this unit becomes ready for duplicating operation.
5 4 6 2 2 1, 6, Press coPY three times. The following message appears on the display, and this unit enters the copy standby mode. Duplication has not been started yet at this stage. ) L.I P ]. J. C..!!_t".. i!!? / I \ o;sr,l.ci Press _ (OPEN/CLOSE close the disc tray. on the remote control) to When the disc tray is closed, this unit starts reading the disc information, When reading has been completed, this unit automatically starts copying from the HDD onto the CD. ,,,..
Selectinga Discto Be Copiedon Settingthe CopyingMode MULTIJOG GROUP SKIP <_ MODE/SET MULTI JOG GROUP SKIP _,_ ENTER When the copying onto the HDD, you can select the disc on the HDD to make copy on. Rotate the MULTI JOG knob (press GROUP SKIP on the remote control) to select the disc number to make the copy on While this unit is in the copy standby mode. \ This unit provides various copying modes. Choose the one that suits your needs.
_IIJdl_,l_[,I,]=111111]"di'lI_,Jill] "d=11!_,_1 i Ill _ 3, Press the MULTI JOG knob (ENTER on the remote control) to confirm the copying mode selected. If "Multi Sync." is confirmed, follow below to make further settings. CopyingMenuSetting the steps described MULTI JOG MENU • When "Multi Sync." is confirmed The following message appeaxs on the display, and you can enter the desired number of tracks to be copied. •l'/v_ iO\ 1 • Select the number of tracks by rotating the MULTI JOG knob (pressing +/-
4, Adjust the parameter for each item by rotating the MULTI JOG knob (pressing +/- on the remote control). See the further steps for detailed instructions on parameter adjustment for each item. 5, Press the MULTI JOG knob (ENTER on the remote control) to confirm the setting when adjustment has been completed. 6, Press MENU to close the menu. • Copy Level Setting of the sound level for copying. Sound level adjustment is not normally necessary.
You can select the desired tracks from among the ones recorded on the HDD (or a CD) and store them as an album in this unit's memory. You can also edit the album afterwards. The tMlowing steps describe how to edit the album. For details about each editing menu item, refer to the descriptions on the following pages corresponding to your need. To create a new album .................................................................................................
1'-'I.=!'|i'il=NIII_F AlbumNew Edit Stored You can create a new album by selecting the desired tracks from among the ones recorded on the HDD or a CD. You can add tracks to or delete tracks from an already created album. Editing subject: HDD or CD Editing subject: HDD or CD 1 • Select and confirm "Album New" in step 4 for 1 • Select and confirm "Edit Stored" in step 4 for "ALBUM EDITING" on page 31. The following message appears on the display.
,_'l:pJ=,+==,J==m, 4. Select the track to be added by rotating the MULTI JOG knob (pressing +/- on the remote control). AlbumCopy 5, Press the MULTI JOG knob (ENTER on the remote control) to confirm the track to be added. 6, When continuing to add tracks to the album, repeat You can copy the entire disc, album, or bookmark in a new album. Editing subject: HDD only steps 2--5. 7, 1 • Select and confirm "Album Copy" in step 4 for "ALBUM EDITING" on page 31.
I'-_I.=!'|i'il_ ._lllIF AlbumRename AlbumDelete You can move the album and assign a new number. You can delete an existing album. Editing subject: HDD only Editing subject: HDD or CD 1 • Select and confirm "Album Rename" in step 4 for 1 • Select and confirm "Album "ALBUM EDITING" on page 31. The following message appears on the display. F;::._n .!_r,_:._ Delete" in step 4 for "ALBUM EDITING" on page 31. The following message appears on the display. (when HDD is selected) I'_1 I'_l 'i ") ,,:.
3, AlbumPack Press the MULTI JOG knob (ENTER on the remote control) to confirm the album to assign a title to. The tollowing message appears on the display. You can re-organize the album numbers by eliminating unused album numbers that have been created by changing album numbers or deleting albums. /I \ Editing subject: HDD 1 • Select and confirm "Album The cursor flashes. Pack" in step 4 for "ALBUM EDITING" on page 31. The following message appears on the display. P.
I'-'I. =!'|i'il_ ._llll_€ 3. Press COMPLETE entered. when all the characters have been Press TRAC K NOJBOO KMAR K (BOO KMAR K on the remote control) to place a bookmark during playback of the track. The BKMARK indicator lights on the display. The title is assigned to the selected album. G • If a new character is entered on the existing character, the new character takes the space and moves the original character and the following characters backward by one space.
You can do various editing operations on the tracks that have been recorded on the HDD. The following steps describe how to edit a track. For details about each editing menu item, refer to the descriptions on the following pages corresponding to your need. To change a track number ............................................................................................ "Track Rename" (page 38) To adjust the beginning of a track .........................................................................
lit :__,Tll"!1 _ m]lil _[€ TrackRename TrackAdjust You can move a track and assign a new number. You can change the beginning of the track to either earlier or later. 1 • Select and confirm "Track Rename" in step 5 for 1 • Select and confirm "Track Adjust" in step 5 for "TRACK EDITING" on page 37. The fol]owing message appears on the display. "TRACK EDITING" on page 37. The fol]owing message appears on the display.
illllifi_ =q=,]==z_ [= 7', Adjust the time length to change the beginning of the track by rotating the MULTI JOG knob (pressing +/on the remote control). The time len_h can be adjusted by "minute: second: frame". (Frame is the unit used for values smaller than 1 second. 75 frames make 1 second.) Move the cursor on the side of the TrackErase You can erase a selected track.
lit :__,TlJ'g _ Hlil_ [€ 3, PartErase seconds before the beginning point of the partial erase set in step 2.Then the passage between the searched point and the beginning point set for the You can erase part of a selected track. 1 • Select and confirm "Part Erase" in step 5 for "TRACK partial erase is for repeatedly played. Go to the next step, if the beginning point of the partial erase is set appropriately. If not, continue setting by repeating steps 2 and 3. EDITING" on page 37.
illlli_i_ =q=,]=iz_[= 3, Press MODE/SET to confirm the ending point of the partial erase. "Prt.Er." and "Pt.Fix" alternately appear on the display. P r" ", iiiir" "' "' TrackCombine You can combine a series of tracks into one. 1 • Select and confirm "Track Combine" in step 5 for "TRACK EDITING" on page 37. The following message appears on the display. t! Disc that contains the first track to be combined / F:>", ,, F:: J. ::.," "' ,::1 ,::1. "' ?._ .
lit :__,TI][g _ Hlil_ [€ 9, TrackDivide Press COMPLETE. The selected track is divided into two at the set dividing point. You can divide a track into two at the selected point, • The minimum length of a track is 4 seconds. It is not possible to create a track that is shorter than 4 seconds by dividing a track. 1 • Select and confirm "Track Divide" in step 5 for "TRACK EDITING" on page 37. The fol]owing message appears on the display. Disc that contains the track to be divided :i. :i.,:J r00Ji..
illlli_i_ =q=,]==z_ [= TrackPack AddFadeln You can re-organize the track numbers by eliminating unused track numbers, that have been created by changing track numbers or erasing tracks. You can add fadeqn at the beginning of a track. The beginning of the track is played with gradually rising level When fadeqn has been added. 1 • Select and confirm "Track 1 • Select and confirm "Add Pack" in step 5 for "TRACK EDITING" on page 37. The following message appears on the display.
lit 8, :f_,TlJ'g _ Hlil_ [€ Press the MULTI JOG knob (ENTER on the remote control) to repeatedly play the passage between the 6, Press c_.FD(_>on the remote control) to play the track to add fade-out. beginning of the track and a point that is several seconds after the end of the fade-in to be added as "Fd.Out" and the fade-out len_h alternately appear on the display. set in step 7. F::,::J ,, 0 u", Go to the next step, if the fade-in length is set appropriately.
illlli_i_=_ :9=,]==z_ [= • Track Title When the MULTI JOG knob is rotated clockwise, characters 1 • Select and confirm "Track Title" in step 5 for "TRACK appear in the order of alphabetical capital letters, alphabetical lower case letters, numbers, and symbols. Select the character you wish to use for the title. EDITING" on page 37. The following message appears on the display. Disc that contains the track to assign a title to / 'I" :i."_ i. ,!!._ rl_'_ '_I ::;1:J .
You can do various editing operations on the discs that have been recorded on the HDD. The following steps descritm how to edit a disc. For details about each editing menu item, refer to the descriptions on the following pages corresponding to your need. To change a disc number ............................................................................................. ,Disc Rename" (page 46) To erase a disc ...............................................................................................
,l_.-_q=,]=,l_[€ 4. Select the new disc number to by rotating the MULTI JOG knob (pressing +/- on the remote control). 5. DiscCombine You can combine a series of discs into one. Press the MULTI JOG knob (ENTER on the remote control) to confirm the new disc number. 1 • Select and confirm "Disc Combine" in step 5 for "DISC EDITING" on page 46. The tbllowing message appears on the display. • If a wrong selection is confirmed, press CLEAR to cancel it. Then, select again and confirm the correct entry. 6.
Disc Divide Disc Pack You can divide a disc into two at the selected point. You can re-organize the disc numtmrs by eliminating unused disc numbers that have tmen created by changing disc numbers or erasing discs. 1 • Select and confirm "Disc Divide" in step 5 for "DISC EDITING" on page 46. The following message appears on the display. 1 • Select and confirm "Disc Pack" in step 5 for "DISC EDITING" on page 46. The following message appears on the display. I' 'i ") _00.,. 5. [? :i.,._:i.
,iF.-%q=,u,m, • Disc Title You can assign a title to a recorded disc. 1 • Select and confirm "DiscTitle" in step 5 for "DISC 1 • Select the character to be used for the title by using the alphabetical/numeric buttons on the remote control. EDITING" on page 46. The following message appears on the display. r :i.", ]. Alphabetical capital letters, alphabetical lower case letters, and numbers switch each time the buttons are pressed. To create a space, press SPACE.
You can cancel an operation and the result of a previous editing step on this unit (Undo function). 1 • Press MENU to display the menu item selection while this unit is in the stop mode. 2, Select "Undo" by rotating the MULTI JOG knob (pressing +/- on the remote control). i.j n d 0 3, Press the MULTI JOG knob (ENTER on the remote control) to display "Undo?". 4, Press COMPLETE. The previous editing operation and result are canceled.
You can erase the data recorded on a CD-RW disc. New recordings can t_ made in the space created by erasing. The following 4 types of erasing are possible with this unit. • • TOC Erase This operation is only available on a CD_RW disc that has been finalized. After the Table of Contents (TOC) has been erased, the effects of finalization possible. LastTrack Erase This operation erases the last track on a disc.
This unit can play back tracks recorded on the 2 types of recording media; HDD and CD, Press HDD to play tracks recorded on the HDD, and press CDR to play tracks recorded on a CD (including a CD-R and a CD-RW disc), Playinga CD PlayingTracksonthe HDD 1 2 1,2 3,4 5 2, 3 4 15 4 4 3 1, 2, Press _ (OPEN/CLOSE open the disc tray. on the remote control) to Load the CD to be played on the disc tray and close the disc tray by pressing _ (OPEN/CLOSE on the remote control).
MULTI JOG GROUP SKIP <:I ENTER Findingthe DesiredPassage(Search) Findingthe DesiredGroup (GroupSkip) • To go forward rapidly Press and hold _::_'-/_:::_:'_ (_::_::'on the remote control) during playback. When the button is released, normal playback resumes. You can select the _oup the HDD. • • To go backward rapidly Press and hold _
MULTI JOG ENTER Numeric buttons Findingthe DesiredTrack(TrackSkip) • • TO play the desired track Select the desired track by using the numeric buttons on the remote control. The selected track numt_r appears on the display. To select the desired track number with the MULTI JOG knob (+/- on the remote control) Press the MULTI JOG knob (ENTER on the remote control) to turn on the TRACK indicator on the display. TRACK Example: To select track 25 Press +10 twice, and then immediately press 5 once.
This unit provides various playback methods according to the setting. The following steps describe the setting procedure for each setting. • The setting of play style, random play, repeat play, and intro play can be set during the playback. • When random play is set, all tracks that belong to the selected group category are played in a random sequence. • When full repeat play is set, all tracks that belong to the selected group category are repeatedly played.
RandomPlay SingleRepeatPlay You can listen to all tracks recorded in a group on the HDD or on a CD in a random sequence. You can listen to a single desired track or to a track being played repeatedly. • • To set random play To set single repeat play 1 • Press HDD or CDR to select the drive to be used. 1 • Press HDD or CDR to select the drive to be used. 2, Press MODE/SET to start the playback mode setting. 2, Press MODE/SET to start the playback mode setting.
_lm_vl_,l ( [_ :1m] ".JI!_,$'1:f_,(_ _11 "J:1:(_,_1 i [I]l Full Repeat Play IntroPlay You can repeatedly listen to all tracks recorded in a group (or a CD) or group category. You can listen to the beginnings of the tracks for a set amount of time one after another. • • To set full repeat play To set intro play 1 • Press HDD or CDR to select the drive to be used. 1 • Press HDD or CDR to select the drive to be used. 2, Press MODE/SET to start the playback mode setting.
AlbumPlay BookmarkPlay You can listen to the desired tracks in the desired order (album You can easily listen to a group of desired tracks by selecting a list of tracks with bookmarks. See page 36 for details about bookmarks. play). You need to create an album that lists the tracks in a certain order. See page 32 for the album creation procedure. • To play a created album 1 • Press HDD to select the HDD. 2, 1 • Press HDD or CDR to select the drive to be used.
[|II_'] • To format the HDD (HDD Format) You can format the HDD in this unit. HDD Utility • To check the HDD utility (HDD Info.) You can check the HDD utility (capacity, usage, and available space) of this unit. • After the HDD has been formatted, 1 • Press MENU to display the menu item selection while • After all data on the HDD have been initialized, the undo function cannot be applied to any editing operations t_fore formatting. this unit is in the stop mode.
iEo)|-'I_;_ SystemUtility • To initialize the setting for each item (Initialize) You can initialize the settings that have been changed. • To check the firmware version (Firm. Version) Software that is called "firmware" is built into this unit. This 1 • Press MENU to display the menu item selection while this unit is in the stop mode. firmware controls the operation. The following steps describe the firmware version check procedures.
• To change the display brightness (Dimmer Setup) You can change the brightness of the display. 1 • Press MENU to display the menu item selection while this unit is in the stop mode. 2, 3, 4, • To set auto play (Auto Play) You can set the auto play function Which automatically starts playback When the power of this unit is turned on. 1 • Press MENU to display the menu item selection Select "Sys. Utility" by rotating the MULTI JOG knob (pressing +/- on the remote control).
iKO_| -'1€1;{,€ DAC(Digital/Analog Converter) Mode This unit has a DAC mode function, You can switch the input signals, as an input selector, to output from both the analog and digital jacks to the amplifier connected to this unit, 1 • Press MENU to display the menu item selection while this unit is in the stop mode. 2, Select "DAC mode" by rotating the MULTI JOG knob (pressing +/- on the remote control). [?1:1 3,, o ,:J Press the MULTI JOG knob (ENTER on the remote control) to enter the DAC mode.
mllllll=l_tl No Previous DisplayMessages When making "Track Adjust" on the TRACK EDITING menu, there is no track before the track to be adjusted. Can't Copy This message is displayed for approximately 3 seconds When digital recording or copying is not possiNe according to the SCMS standard. No Source When copying from the HDD onto a CD-R or CD-RW disc, there is no source recorded on the HDD to be used for copying. See "Rules of Digital Recording" on page 11.
i_o_ll-'l_l;{,: Troubleshooting If this unit fails to operate normally, check the following points to determine Whether the fault can be corrected by the simple measures suggested. If they cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for assistance. SYMPTOM CAUSE REMEDY This unit does not turn on When POWER is pressed, The AC power cord is not completely connected.
t_lll:l=l={_ SYMPTOM CAUSE REMEDY This unit does not operate properly, The internal microcomputer has been frozen. Turn off"the power of this unit and then turn on again after about one minute. Remote control does not work. The batteries of the remote control are too weak. Replace 2 batteries with new ones. Remote control is from too far. Remote control is being used at an incorrect angle. Use the remote control within 6m and 60 degrees radius.
S CAUTION Use of controls or adjustments procedures or performance other than those specified result in hazardous radiation of CLASS I herein may LASER KLASSE brochure de reglages ou un choix de differents des specifications II PRODUITLASER BH II H II H OECLASSE I I_ --j \ de cette peut entratner une exposition radiations LUOKAN I LASERLAITE KLASS 1 LASER APPART \-- Uemploi de commandes, procedures PRODUCT I PRODUKT i exposure.