BLACK DIC 2181s* UCAB OWNER’S MANUAL MODE D’EMPLOI
HiFi Began with Yamaha Yamaha’s involvement with and passion for music goes back more than a century, to when we built our first reed organ in 1887. Now we are the world’s leading producer of pianos and other musical instruments, and are involved with music in many other ways as well. We manufacture professional recording equipment, we design concert halls and we assist artists at concerts with set up and sound tuning. This knowledge and experience benefits our production of audio components in many ways.
Excellence in Audio Achievement First HiFi System introduced in 1920 We introduced numerous HiFi components (turntables, FM/AM tuners, integrated amplifiers, preamplifiers, power amplifiers and speakers) in 1955 - 1965. Natural Sound Speaker Series introduced in 1967 NS-20 Monitor Speaker CA-1000 Integrated Amplifier Featuring A-Class operation, the CA-1000 set the standard for integrated amplifiers.
◆ Full-stage balanced signal transmission achieves the ultimate in CD reproduction ◆ Full-stage balanced signal transmission beginning with the DAC ◆ Silent loader and high precision CD drive ◆ Independent power supplies with digital and analog completely separated ◆ Pure Direct ◆ Left-right symmetrical design with rigid, stable construction ◆ Super sound from Super Audio CDs ■ Supplied accessories Please check that you have received all of the following parts.
CONTROLS AND FUNCTIONS Controls and functions In this chapter, you will learn the controls and functions of CD-S2000.
Controls and functions ■ Front panel POWER SA-CD/CD PURE DIRECT 3 4 ON OFF 1 2 1 POWER Press upward or downward to turn on or off this unit. y The POWER indicator above lights up when this unit is turned on. 2 Remote control sensor Receives signals from the remote control. 3 SA-CD/CD Switches the playback layer of a hybrid SA-CD between SA-CD and CD. 4 PURE DIRECT Turns on the PURE DIRECT mode to improve audio quality.
A B C SA-CD MP3 WMA 6 7 D TRACK TOTAL REMAIN PROG RANDOM REP OFF S ALL 8 9 6 (Open/Close) Opens or closes the disc tray. 0 (Stop) Stops playback. y A Playback status indicator You can also close the disc tray by: • pressing (Play) on the front panel or on the remote control or by pressing the front edge of the disc tray gently. • pressing a numeric button on the remote control. 7 (Skip/Search backward), (Skip/Search forward) : Skips to the next track.
Controls and functions ■ Rear panel 1 2 OUTPUT R L R BALANCED OUT L ANALOG OUT OPTICAL BALANCED OUT COAXIAL DIGITAL OUT 3 See page 14 for connection information.
(Asia and General models) VOLTAGE SELECTOR AC IN 5 5 VOLTAGE SELECTOR (Asia and General models only) The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging the AC power cable into the AC wall outlet. See page 16 for further information. 6 7 7 Foot The feet of this unit include built-in spikes. Using the spikes can reduce the effect of vibrations on the set. When using the spikes, remove the magnet foot by pulling it.
Controls and functions ■ Remote control 1 Infrared signal transmitter Sends infrared signals to this unit. 1 2 SA-CD/CD Switches the playback layer of a hybrid SA-CD between SA-CD and CD. SA-CD/CD PURE DIRECT OPEN/CLOSE 2 3 4 CD DIMMER 1 2 3 4 5 6 7 8 9 0 ENTER CLEAR REPEAT 5 DISPLAY PROGRAM RANDOM 8 9 0 y • The SA-CD/CD indicator on the front panel lights up when the SA-CD layer is selected. • This setting is retained even if you turn off this unit.
8 OPEN/CLOSE Opens or closes the disc tray. E (Pause) Pauses playback. Press 9 PURE DIRECT Turns on the PURE DIRECT mode to improve audio quality. When this unit is in the PURE DIRECT mode: • The PURE DIRECT indicator above lights up. • The digital output is turned off. • The front panel display is turned off. F (Play) Starts playback. y or G (Stop) Stops playback. See pages 20 for more information on MP3/WMA playback.
Controls and functions ■ Installing batteries in the remote control ■ Using the remote control The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote control sensor on the front panel of this unit during operation. 1 3 2 1 Press the part and slide the battery compartment cover off. 2 Insert the two supplied batteries (AA, R6, UM-3) according to the polarity markings (+ and –) on the inside of the battery compartment.
CONNECTIONS Connections In this section, you will make connections between CD-S2000 and your amplifier.
Connections OUTPUT R L R BALANCED OUT ANALOG OUT OPTICAL L BALANCED OUT COAXIAL DIGITAL OUT Amplifier 14 En XLR balanced cable Audio cable (supplied) Coaxial digital cable Optical digital cable Select one of these connections. If your amplifier is equipped with XLR balanced input jacks, we recommend balanced connection for optimum audio performance.
AC IN ■ Connecting to the BALANCED OUT jacks Connect your amplifier with the XLR balanced output jacks. The pin assignments for these jacks are shown below. Refer to the owner’s manual supplied with your amplifier and verify that its XLR balanced input jacks are compatible with the pin assignments. When connecting, be sure to match the pins and insert the connector of the “female” XLR balanced cable.
Connections ■ VOLTAGE SELECTOR (Asia and General models only) Caution The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local voltage BEFORE plugging the power cable into the AC wall outlet. Improper setting of the VOLTAGE SELECTOR may cause damage to this unit and create a potential fire hazard. Rotate the VOLTAGE SELECTOR clockwise or counterclockwise to the correct position using a straight slot screwdriver. Voltages are as follows: ........................
Specifications In this section, you will find technical specifications for CD-S2000.
Specifications AUDIO SECTION • Frequency Response SA-CD ..................................................... 2 Hz to 50 kHz (–3 dB) CD ......................................................................... 2 Hz to 20 kHz • Total Harmonic Distortion SA-CD .................................................................. 0.0017% or less CD .......................................................................... 0.
Playable disc format ■ Supported disc types CD-R, CD-RW digital audio discs This unit is designed to play back compact discs bearing the marks shown below. Never attempt to load any other types of discs into this unit. This unit can also play back 8cm (3-inch) compact discs. Music CDs made by copying onto a CD-R or CD-RW (including MP3 or WMA format files).
Playable disc format ■ About MP3 and WMA discs ■ Handling compact discs You can play back MP3 and WMA files recorded on a CD-R or CD-RW with similar uses as a music CD. • Always handle a disc with care so that its surface is not scratched. MP3 MP3 (MPEG-1 Audio Layer-3) is a standard technology and format for compressing an audio sequence into a small-sized file. However, the original level of sound quality is preserved during playback. Notes • This unit plays back MP3 files in alphanumeric order.
Troubleshooting Refer to the chart below if this unit does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off this unit, disconnect the AC power cable, and contact the nearest authorized Yamaha dealer or service center. Problem Cause Remedy See page The unit does not switch ON when POWER is pressed upward. The power cord is not connected nor completely connected. Securely connect the power cord.
BLACK DIC 2181s* © 2007 All rights reserved. YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD.
UCAB Super Audio CD Player Lecteur Super Audio CD SAFETY BROCHURE BROCHURE SUR LA SECURITE
IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
1 IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2 IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
Caution: Read this before operating your unit. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 10 cm on the top, 10 cm on the left and right, and 10 cm on the back of this unit.
■ Handling the remote control • Change all of the batteries if you notice that the operation range of the remote control decreases. • Use AA, R6, UM-3 batteries. • Make sure that the polarities are correct. See the illustration inside the battery compartment. • Remove the batteries if the remote control is not used for an extended period of time. • Do not use old batteries together with new ones. • Do not use different types of batteries (such as alkaline and manganese batteries) together.
© 2007 YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND YAMAHA SCANDINAVIA A.B.
A-S2000_CD-S2000_Flyer.fm Page 1 Friday, September 21, 2007 4:20 PM A-S2000/CD-S2000 Note on transport tape English Upon shipment from the factory, magnet feet are fixed with transport tape to this unit’s feet. Remove the transport tape before placing this unit. Remarque sur le ruban adhésif Deutsch Bei Versand ab Werk sind die Magnetfüße mit Transportband an den Füßen des Geräts befestigt. Entfernen Sie das Transportband vor der Aufstellung des Geräts.
