AL BLU-RAY DISC PLAYER BD-S667 OWNER’S MANUAL USB
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 2 3 4 5 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this sound system in a well ventilated, cool, dry, clean place-away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. For proper ventilation, allow the following minimum clearances.
CONTENTS 1. INTRODUCTION 1 5. ADDITIONAL INFORMATION WHAT YOU CAN DO WITH THIS PLAYER........ 2 SUPPLIED PARTS .............................................. 2 ABOUT DISCS AND FILES................................. 3 Types of discs/files that can be used with this player..... 3 Disc precautions ............................................................. 4 Loading a disc................................................................. 4 CONTROLS AND FUNCTIONS .......................... 5 Front panel...
INTRODUCTION WHAT YOU CAN DO WITH THIS PLAYER \ p. 16 \ p. 20 \ p. 23 \ p. 17 Play back Video, Music, Photo files on a disc/USB memory device* \ p. 17 Easy setting for language, resolution, screen aspect ratio You can perform language and TV settings. Play back commercially-released BD/DVD/CD discs* In addition to BD discs, this Player also supports playback of a variety of other discs. Play back BONUSVIEW, BD-Live, etc.* You can enjoy additional movies on the latest BD discs.
1 ABOUT DISCS AND FILES – 12 cm (5”) and 8 cm (3”) discs can be played back in this Player. Do not use an 8 cm (3”) to 12 cm (5”) adapter. – Use discs that conform to compatible standards as indicated by the presence of official logos on the disc label. Playback of discs not complying with these standards is not guaranteed. In addition, the image quality or sound quality is not guaranteed even if the discs can be played back.
ABOUT DISCS AND FILES ■ Disc precautions Be careful of scratches and dust – BD, DVD and CD discs are sensitive to dust, fingerprints and especially scratches. A scratched disc may not be able to be played back. Handle discs with care and store them in a safe place. ■ Loading a disc – Insert the disc with the label face up. – In case of the disc recorded on both sides, face down the side to play back.
1 CONTROLS AND FUNCTIONS INTRODUCTION ■ Front panel USB 1 2 3 4 1 p (On/Standby) 5 6 7 8 4 Front panel display 8 (Search forward/Skip forward): Press to skip forward, and press and hold to search forward. 9 (Eject) (p.
CONTROLS AND FUNCTIONS ■ Remote control 1 2 3 4 5 6 Number buttons: Enters numbers, or during playback, jumps to the track/chapter corresponding to the number you input. R Q TRANSMIT MARKER SETUP A B C D 7 CLEAR: Clears entered number/set item. 8 PROGRAM CD DVD : Sets the order of playback (p. 22). You can set up to 15 tracks (for Audio CD) or titles/chapters (DVD-Video). 9 PIP BD : Turns on/off the Picture in Picture (p. 23).
CONTROLS AND FUNCTIONS G Control buttons BD DVD CD VIDEO MUSIC PHOTO : Stops playback. To stop playback completely, press this button twice. : Pauses playback. : Plays back contents. / : Skips backward/forward. : Repeats the title being played back. : Repeats the chapter being played back. : Repeats all tracks/files on the disc/folder. : Repeats the track/file being played back. 1 INTRODUCTION / : Searches backward/forward.
CONNECTION INTRODUCTION TO CONNECTIONS Find the corresponding connection method on your video/audio equipment. We recommend that you use the HDMI terminal which provides high quality digital audio and video on a single connection. If you use the other terminals/jacks, connect the video first. Then connect the audio. Connect video and audio to AV receiver with HDMI cable. HDMI terminal on AV receiver? * HDMI terminal on TV? Refer to owner’s manual of AV receiver.
2 CONNECTION Video and audio connection to AV receiver A HDMI (p. 10) Audio connection to AV receiver Video connection to TV A’ HDMI (p. 10) Connect audio to AV receiver. D COAXIAL (p. 12) or to AV receiver E B COMPONENT (p. 11) OPTICAL (p. 12) or or F L/R (p. 13) C VIDEO (p. 11) Video and audio connection to TV A’ HDMI (p. 10) Audio connection to TV Video connection to TV Connect audio to TV. D’ COAXIAL (p. 12) or B’ COMPONENT (p. 11) E’ OPTICAL (p. 12) or or C’ VIDEO (p.
HDMI CONNECTION ■ Connecting to the HDMI terminal – – – – You can enjoy high quality digital picture and sound through the HDMI terminal. Firmly connect an HDMI cable (commercially available) to the HDMI terminals. See page 30 for information on the audio/video output formats. Use HIGH SPEED HDMI cables that have the HDMI logo (as shown on the back cover). Caution! Do not connect the power cable of this Player until all connections are completed.
VIDEO CONNECTIONS ■ Connecting to the component/video jack Caution! Do not connect the power cable of this Player until all connections are completed. This Player DIGITAL OUT AUDIO OUT COAXIAL L This Player DIGITAL OUT VIDEO OUT COMPONENT Y PB PR VIDEO (Red) (Blue) (Green) R AUDIO OUT COAXIAL L HDMI OPTICAL 2 CONNECTION – You can enjoy accurate color reproduction and high quality images through the component jacks.
AUDIO CONNECTIONS ■ Connecting to the digital audio jack/terminal – You can connect audio equipment or the TV to the COAXIAL jack/OPTICAL terminal. – Firmly connect a Coaxial digital audio cable (commercially available) or optical cable (commercially available) to the coaxial digital audio jack or optical digital audio terminal. – See page 30 for information on the audio output formats. Caution! Do not connect the power cable of this Player until all connections are completed.
AUDIO CONNECTIONS ■ Connecting to the audio jacks – You can connect audio equipment or the TV to the AUDIO OUT L/R jacks. – Firmly connect an Audio/Video cable (supplied) to the AUDIO OUT L/R jack. – See page 30 for information on the audio output formats. 2 Caution! CONNECTION Do not connect the power cable of this Player until all connections are completed.
NETWORK AND USB CONNECTION ■ Connecting to the NETWORK terminal and USB/BD STORAGE terminal – PC contents can be played back by connecting this Player to the network. – You can enjoy a variety of contents with interactive functions by connecting to the internet when playing BD-Live compatible discs. Refer to page 23 regarding further information on BD-Live functions.
OTHER CONNECTIONS ■ Connecting to the REMOTE CONTROL jacks ■ Connecting the power cable – After all connections are completed, plug the supplied power cable into the AC inlet on the rear of the Player. Then plug into AC outlet. 2 CONNECTION – You can transmit and receive the remote control signals by connecting to the REMOTE CONTROL (OUT/IN) jacks. – Firmly connect monaural 3.5 mm mini plug cables (commercially available) to the REMOTE CONTROL (OUT/IN) jacks.
PLAYBACK INITIAL WIZARD/EASY SETUP ■ Setting with the Initial Wizard/ Easy Setup Initial Wizard/Easy Setup allows you to set language, resolution, and screen aspect ratio easily. Initial Wizard screen is displayed when you turn this Player on for the first time after purchase or upgrade. Same setting can be performed from SETUP menu = System = Easy Setup. 4 Press 5/a to select the screen aspect ratio, then press ENTER. For details on setting items, see “TV Screen” (p. 28). Easy Setup is completed.
HOME MENU HOME menu allows you to browse and play multi-media files on data discs, USB memory devices and your network. Note – For details on playable disc and format, see page 3. Basic operation 5/a : Moves the focus. 2: Returns to the parent folder. 3: Checks/unchecks single folder/file. HOME: Moves to/exits HOME menu screen. ENTER: Confirms the folder/file. POP-UP MENU: Opens Edit Menu. CLEAR – Stop the playback of the video before you move to HOME menu screen. 1 Press HOME to move to HOME menu screen.
HOME MENU 3 Select the Photo, Music, Video or AVCHD folder you want to play back, then press ENTER. To return to the parent folder, press 2 or select . Hint – To enjoy slide show with music, press HOME to return to the HOME menu screen while music is played back, and select photo file. Note – The displayed file may not be played back depending on the content. Operations for viewing photos Note – Note that the only the file type selected on this step will be displayed in the following step.
HOME MENU 3 To play back a file in playlist, select the file you want to play back under the playlist folder on HOME menu screen. Note – When a disc/USB memory device which contains the file added to the playlist is removed, the file will be removed from the playlist. 4 Select the file you want to play back. Notes – The playback and operating quality may be affected by your home network condition.
ADVANCED PLAYBACK OPERATION This chapter explains playback of commercially available BD and DVD discs (like movies), CDs, and recorded DVD-RW/R discs. Note – For the basic playback operation, see page 6. ■ On Screen menu This allows you to operate some functions from the On Screen menu. To display On Screen menu, press ON SCREEN. After that, press 5/a /2/3 to select an item, then press ENTER to operate the desired function.
ADVANCED PLAYBACK OPERATION ■ Status menu This allows you to adjust various settings, such as subtitles, angle settings and the title selection for direct playback. To display status menu, press STATUS. Status menu contains following menus.
ADVANCED PLAYBACK OPERATION ■ Using Bookmark DVD VIDEO This allows you to set Bookmark at the specified point of the video. After Bookmark is set, you can move to the point you set using this function. You can set up to 12 Bookmarks. 1 Press MARKER during playing back the movie to set Bookmark. Bookmark number, and the status are displayed. 2 Press ENTER to program playback order. For CD, press 5/a to select a desired track then press ENTER.
ADVANCED PLAYBACK OPERATION ■ Enjoying BONUSVIEW and BDLive ■ Using the feature of BD-Live This player supports BONUSVIEW (p. 35) (BD-ROM Profile 1 Version 1.1) and BD-Live (p. 35) (BD-ROM Profile 2) playback functions. 1. Set the Network setting (p. 27).
SETTINGS SETUP MENU The SETUP menu enables various audio/visual settings and adjustments for functions using the remote control unit. Menu/Submenu Item System Screen Saver Sets screen saver on/off. 26 Disc Auto Playback Sets this Player to start disc playback automatically. 26 HDMI Control Sets this Player to receive control signal from the remote control of your TV/AV receiver. 26 Disc Auto Upgrade Sets the auto upgrade to on/off.
SETUP MENU Menu/Submenu Item Audio Output Function Page COAXIAL/ OPTICAL Selects the output mode of COAXIAL jack/OPTICAL terminal from Bitstream/PCM/Reencode/Off. 29 HDMI Selects the output mode of HDMI terminal from Bitstream/ PCM/Reencode/Off. 29 Downsampling Selects the digital audio signal down sampling frequency from 48k/96k/192k. 29 DRC Sets the DRC (Dynamic Range Compression). 29 Sets the audio output from AUDIO OUT L/R jack.
SETUP MENU 3. Select a menu item. Press 5/a to select Parental Control, then press ENTER or 3. ■ General Setting The default settings are marked with “ * ”. System Screen Saver You can set the screen saver to on/off. When set to on, this Player will switch to screen saver mode if there is no operation for 3 minutes. After that, this Player will turn to standby mode when there is no operation for 6 minutes. On*, Off Disc Auto Playback You can set Disc Auto Playback to on/off.
SETUP MENU Disc Auto Upgrade You can set Disc Auto Upgrade to on/off. When set to on, this Player will upgrade the software after loading the disc which contains the upgrade file package. For details on software upgrade, refer to “SOFTWARE UPGRADE” (p. 32). On*, Off Load Default You can reset all settings of this Player to default setting except Security setting (p. 27). For details on default settings, see pages 24-29. Easy Setup You can perform Easy Setup (p. 16). BUDA You can manage BUDA (p.
SETUP MENU IP Setting You can set IP Setting to Auto/Manual. When set to Auto, IP address is allocated automatically by system. When set to Manual, IP Address, Subnet Mask, Default Gateway and DNS should be set manually. Original image size On 4:3 TV 4:3 Pan Scan 4:3 Letterbox Auto*, Manual BD-Live Connection You can set access restriction to BD-Live contents. Permitted* Allows all BD-Live discs to connect the network. Partial Permitted Allows only discs with owner certification.
SETUP MENU Video Process Video Adjust You can adjust the visual image. Press 5/a to select the parameter, then press 2/3 to adjust the figure. Brightness Adjusts the overall brightness of the image. To render a brighter image, increase this figure. To render a darker image, decrease this figure. Contrast Adjusts the bright areas (white levels) in the image. To increase the contrast clarity of the image, increase this figure. To decrease the contrast clarity of the image, decrease this figure.
SETUP MENU ■ About the audio output formats HDMI Source format Bitstream PCM 2ch COAXIAL/OPTICAL PCM Reencode Bitstream PCM 2ch PCM PCM 2ch PCM 5.1ch PCM 5.1ch PCM 2ch PCM 7.1ch PCM 7.1ch PCM 2ch Dolby Digital Dolby Digital with SA* or BCS** Dolby Digital PCM 5.1ch Dolby Digital Plus with SA* or BCS** Dolby Digital Plus PCM up to 7.1ch Dolby TrueHD PCM up to 7.1ch DTS PCM up to 7.1ch DTS HD High Resolution with SA* or BCS** DTS HD High Resolution PCM up to 7.
SETUP MENU When TV System is set to PAL Auto 480i/576i 480p/576p 720p 1080i HDMI 1080p 24Hz – – – – – Max 576i 576p 720p 50 Hz 1080i 50 Hz 576p 576p 576p 576i 576p 720p 50 Hz 1080i 50 Hz 576i 576i 576i Playback BD HDMI others Playback commerciallyCOMPONENT released DVD Playback BD others Playback BD VIDEO others 576i 576i 1080p On Off 1080p 24 Hz 1080p 50 Hz 1080p 50 Hz 576p off 1080i 50 Hz 1080i 50 Hz off 576i 576i 4 SETTINGS Resolution When TV System is set to
SOFTWARE UPGRADE Some of the newly released BD discs cannot be played back unless you upgrade this Player software to the latest version. We recommend upgrading the software of this Player with software upgrade so that this Player is operated based on the latest software. 3 Select the item which contains the upgrade file package from Disc/USB Storage/Network. To check for the availability of a software upgrade, visit http://download.yamaha.com/downloads/service/top/ ?site=europe.yamaha.
ADDITIONAL INFORMATION TROUBLESHOOTING Refer to the table below when this Player does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off this Player, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. ■ Power Problem Possible causes and solutions No power. – Connect the AC power cable properly. – Press (p) on the front panel to turn on the power. The Player power is turned off.
TROUBLESHOOTING The playback screen will be disturbed if DVD video is recorded to a VCR, or played back through a VCR. – This Player complies with analog copy protection. Some discs contain a copy prohibiting signal. If you try to play back such discs through a VCR, or record to a VCR and play back the signal, the copy protection will prevent normal playback. Audio is not output, or images are not played back properly.
Error message Possible causes and solutions The Setting is prohibited, please setup again. – BD-Live connection is prohibited. See “BD-Live Connection” (p. 28). No valid upgrade file is found! – Check if the upgrade file is in the appropriate folder. Upgrade has failed for some reason! – Upgrade is failed. Check if the upgrade file is corrupted or unreadable.
SPECIFICATIONS Linear PCM Sound Subtitles Linear PCM is a signal recording format used for Audio CDs and on some DVD and Blu-ray discs. The sound on Audio CDs is recorded at 44.1 kHz with 16 bits. (Sound is recorded between 48 kHz with 16 bits and 96 kHz with 24 bits on DVD discs and between 48 kHz with 16 bits and 192 kHz with 24 bits on BD discs.) Mac address The Mac address is a unique value assigned to a network device for identification purposes.
SPECIFICATIONS ■ Copyright Fonts are (c) Bitstream (see below). DejaVu changes are in public domain. Glyphs imported from Arev fonts are (c) Tavmjong Bah (see below) Bitstream Vera Fonts Copyright -----------------------------Copyright (c) 2003 by Bitstream, Inc. All Rights Reserved. Bitstream Vera is a trademark of Bitstream, Inc.
CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION: LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM. DANGER: LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO THE BEAM. LASER Specification: Class 1 LASER Product Wave length: 790 nm (CDs)/655 nm (DVDs)/405 nm (BDs) Laser output: max. 1 mW LASER SAFETY This unit employs a laser.
