00_BD-A1040_P_cv.fm Page 1 Tuesday, May 27, 2014 4:56 PM The laser component in this product is capable of emitting radiation exceeding the limit for Class 1. LASER Specification: Class 1 LASER Product Wave length: 790 nm (CDs)/658 nm (DVDs)/405 nm (BDs) Laser output: max.
Caution: Read this before operating your unit. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this sound system in a well ventilated, cool, dry, clean place-away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. For proper ventilation, allow the following minimum clearances.
Contents About the audio output formats .................................... 40 About the HDMI video output formats......................... 41 1. Introduction What you can do with this Player ..................... 2 Wide variety of supported discs and file formats ........... Enhanced network features............................................. Easy setup and operations............................................... High-quality audio features ............................................
INTRODUCTION What you can do with this Player Various discs Network streaming contents Wireless network (WPS supported) USB contents PC/NAS contents (DLNA) Bluetooth device (smartphone, etc.) Smartphone contents (Miracast) ■ Wide variety of supported discs and file formats – Blu-ray Disc™, DVDs, SA-CDs and CDs (p. 27) – Blu-ray 3D™ (p. 12), BONUSVIEW™ and BD-Live™ (p. 29) – Video, music and photo files on DVD-R/RW discs, CD-R/RW discs and USB memory devices (p.
1 About discs and files – 12 cm (5”) and 8 cm (3”) discs can be played back in this Player. Do not use an 8 cm (3”) to 12 cm (5”) adapter. – Use discs that conform to compatible standards as indicated by the presence of official logos on the disc label. Playback of discs not complying with these standards is not guaranteed. In addition, the image quality or sound quality is not guaranteed even if the discs can be played back.
About discs and files Region management information Destination Russia BD-Video Region code “C” or “ABC” DVD-Video Region number “5” or “ALL” 5 ALL Notes About Super Audio CD (SA-CD) – Audio format based upon the current CD standards but includes a greater amount of information that provides higher quality sound. There are three types of discs: single layer, dual layer and hybrid discs.
About discs and files ■ Disc precautions – Blu-ray Disc, DVD and CD discs are sensitive to dust, fingerprints and especially scratches. A scratched disc may not be able to be played back. Handle discs with care and store them in a safe place. Proper disc storage Place the disc in the center of the disc case and store the case and disc upright. Avoid storing discs in locations subject to direct sunlight, close to heating appliances or in locations of high humidity.
Controls and functions ■ Front panel PURE DIRECT SA-CD USB 5V 0.5A 1 2 34 1 p (On/Standby) Turns this Player on/Sets to standby mode. Press and hold p on the front panel for more than 5 seconds to reset this Player (system reset). 5 6 7 8 9 0 A B 7 (Search backward/Skip backward) Press to skip backward, and press and hold to search backward. 8 3 SA-CD indicator Lights up when an SA-CD is loaded and the SA-CD layer (p. 4) is selected.
Controls and functions ■ Rear panel 1 IN Introduction OUT RS-232C DIGITAL OUT COAXIAL HDMI AC IN NETWORK REMOTE CONTROL AUDIO OUT OPTICAL 1 2 USB 3 4 5 6 7 1 HDMI (p. 12) 5 AUDIO OUT (L/R) (p. 14) 2 DIGITAL OUT (COAXIAL/OPTICAL) (p. 14) 6 REMOTE CONTROL (OUT/IN/RS-232C) (p. 18) 3 USB (p. 17) 7 AC IN (p. 18) 4 NETWORK (p.
Controls and functions ■ Remote control Note 1 Infrared signal transmitter: Outputs infrared signal. Aim this window to the remote control sensor (p. 11). – 2 p: Turns this Player on or sets it to standby mode. will appear on the top left corner of the screen when the pressed button is not available. ZOOM DVD VIDEO PHOTO : Zooms in/out. The size of the screen will change each time you press the button (zoom in/out: 3 steps each).
Controls and functions Note – Secondary Audio Mark is displayed only when Secondary Audio Mark is set to on (p. 35). 0 HOME: Displays the HOME menu screen (p. 20). A TOP MENU BD DVD : Displays the top menu screen if the disc contains a menu. Select the desired item using 5/a/2/3 and ENTER. Note – Specific operations may be different depending on the disc. Follow the instructions of each menu screen. B Cursor buttons (5/a/2/3): Moves the focus in the menu screen. ENTER: Selects the focused menu/item.
Controls and functions P POP-UP/MENU BD DVD : Displays pop-up menu. The menu contents displayed vary depending on the disc. For details on how to see and operate the pop-up menu, refer to the manual for the disc. The top menu screen may be displayed by pressing POP-UP/MENU depending on the DVD.
Controls and functions Loading the batteries in the remote control 3 2 Notes 1 Remote control setting To change the ID from ID1 to ID2, press and hold the red color button and 2 of number button simultaneously for 7 seconds. To change the ID from ID2 to ID1, press and hold the red color button and 1 of number button simultaneously for 7 seconds. 2 Main unit setting Press and hold and on the front panel simultaneously for 2 seconds to display current ID when: – No disc is inserted in this Player.
CONNECTION Video/audio connections Make the corresponding video/audio cable connections depending on the equipment you want to use. Hints – See page 40 for information on the audio/video output formats. – Prepare commercially available cables required for connections. The type and number of cables you need vary depending on the equipment to be connected. Enjoying video/audio using a TV and an AV receiver Refer to “Connecting to a TV via an AV receiver” (p. 13).
Video/audio connections ■ Connecting to a TV via an AV receiver ■ Connecting to a TV directly Connect this Player to the TV with an HDMI cable. Connect this Player to the AV receiver and the AV receiver to the TV with HDMI cables. For details on speaker connections, refer to the owner’s manuals of the AV receiver and speakers. 2 Caution! Do not connect the power cable of this Player until all connections are completed. Do not connect the power cable of this Player until all connections are completed.
Video/audio connections ■ Connecting to a TV and audio equipment Connect this Player to the TV with an HDMI cable, and this Player to the audio equipment with an audio cable (digital optical, digital coaxial or stereo pin cable). Caution! Do not connect the power cable of this Player until all connections are completed.
Network connection By connecting this Player to the network (wireless or wired), you can use the following features. – Playing back DLNA server (PC or NAS) contents (p. 20) – Playing back various network service contents (p. 22) – Playing BD-Live compatible discs (p. 29) – Operating this Player from mobile devices (AV CONTROLLER) (p. 26) 2 – To use the network services or BD-Live feature, a broadband internet connection is required.
Network connection ■ DLNA server setup By using DLNA, you can share multimedia contents (such as videos, music and photos) stored on your DLNA server (PC or NAS) connected to your network, and enjoy those contents with this Player. In addition, you can use your mobile device (such as a smartphone and a tablet) as a wireless controller to operate this Player through the network. To use the DLNA features, perform the following DLNA server setup after making the network connection (p. 15).
USB connection By connecting a USB memory device to the USB connector on the front or the rear panel of this Player, you can play multi-media files stored on the USB memory device (p. 20). – Yamaha cannot guarantee that all brands’ USB memory devices will operate with this Player. – Connect a USB memory device to one of the USB connectors (front/rear) of this Player when using BD-Live feature (p. 30). This Player Connection Notes 2 This Player DIGITAL OUT COAXIAL HDMI NETWORK USB 5V 0.
Other connections ■ Connecting to the REMOTE CONTROL jacks – You can transmit and receive the remote control signals by connecting to the REMOTE CONTROL (OUT/IN) jacks. – Firmly connect monaural 3.5 mm mini plug cables (commercially available) to the REMOTE CONTROL (OUT/IN) jacks. Caution! Do not connect the power cable of this Player until all connections are completed.
PLAYBACK Initial settings ■ Setting with the Easy Setup 3 Press 2/3 to select Yes, then press ENTER. Easy Setup allows you to set language, resolution, and screen aspect ratio easily. Easy Setup screen is displayed when you turn this Player on for the first time after purchase. Same setting can be performed from SETUP menu = System = Easy Setup. 3 Playback 1 When Easy Setup screen is displayed, press ENTER to start Easy Setup. 4 Press 2/3 to select one of the following setup methods, then press ENTER.
HOME menu The HOME menu allows you to perform the following basic operations of this Player. – Browsing and playing multi-media files on various discs, USB memory devices and your DLNA servers (PC or NAS) – Accessing to various network services (p. 22) – Displaying the SETUP menu (p. 31) Hints – For details on playable discs and formats, see page 3. – To play DLNA server contents on this Player, the media sharing setting (p. 16) on the DLNA server should be configured.
HOME menu Operations for viewing photos – Note that the only the file type selected on this step will be displayed in the following step. For example, if you selected Photo folder in this step, only photo files are displayed after this step. While viewing photos, the buttons on the remote control work as shown below. : Stops slide show and returns to the file browser. : Pauses a slide show. : Plays a slide show. : Moves to a next photo. : Moves to a previous photo. : Makes a slide show faster in 3 steps.
Using network services You can enjoy multimedia contents (such as photos and videos) using the following network services. – Dropbox – Picasa Web Albums – YouTube Notes – Access to content provided by third parties requires a high speed internet connection and may also require account registration and a paid subscription. – Third party content services may be changed, suspended, interrupted, or discontinued at any time without notice, and Yamaha disclaims any liability in connection with such occurrences.
Using network services ■ About Dropbox™ Dropbox is a network service that allows you to put your stuff in Dropbox and get it from your computers, phones, or tablets. Automatically add photos and show off video from anywhere. More information at www.dropbox.com 3 Playback Dropbox is a trademark of Dropbox Inc. ■ About Picasa™ Web Albums Picasa Web Albums is a network service that allows users to share photos with friends and family, or explorer public photos. More information at picasaweb.google.
Enjoying music via Bluetooth® You can enjoy music played on a Bluetooth device (smartphone, etc.) on this Player. AV receiver This Player PURE DIRECT SA-CD USB 5V 0.5A ♪ Bluetooth device (smartphone, etc.) Hints – “Pairing” is necessary for each Bluetooth device you use. – Use a Bluetooth device within 10 meters (33 ft) of this Player. – See also the owner’s manual of your Bluetooth device.
Enjoying music via Bluetooth® ■ Playing back Bluetooth device contents Notes – If any Bluetooth device is already connected to this Player, terminate the Bluetooth connection before connecting to another Bluetooth device. – When using Bluetooth, you cannot operate the disc tray or playback of other sources. 3 Playback 1 If playback of other source is ongoing, stop the playback. 2 Press Bluetooth to select Bluetooth as the input source, then turn on your Bluetooth device.
Enjoying smartphone pictures and videos on the TV screen (Miracast™) Miracast is a solution for seamlessly displaying video between devices, without cables or a network connection via an access point (Wi-Fi Direct). You can do things like view pictures from a Miracast-compatible device (smartphone, etc.) on the screen of the TV connected to this Player. Notes – To check if your device is Miracast compliant, refer to the owner’s manual of the device.
Advanced playback operation This chapter explains playback of commercially available Blu-ray Discs, DVDs, SA-CDs, CDs, and recorded DVDRW/R discs. Note – For the basic playback operation, see page 8. To display On Screen menu, press ON SCREEN. After that, press 5/a/2/3 to select an item, then press ENTER to operate the desired function.
Advanced playback operation ■ Status menu This shows various settings, such as subtitles, angle settings and the title/chapter/track number currently played back. To display status menu, press STATUS. Status menu contains following menus.
Advanced playback operation ■ Program play DVD ■ Using Search CD BD DVD CD VIDEO MUSIC PHOTO This allows you to program playback order of audio disc tracks or DVD chapters. Press PROGRAM during playback to display the PROGRAM window to program playback order. You can program up to 15 tracks/chapters. This allows you to jump to the specified point during playback. Example: Programming the playback order of CD tracks 2 Press 5/a/2/3 to select one of the item below, then press ENTER.
Advanced playback operation ■ Using Picture in Picture function (secondary audio/video playback) BD-Video that includes secondary audio and video compatible with Picture in Picture can be played back with secondary audio and video simultaneously as a small video in the corner. Primary video Secondary video Notes – Yamaha cannot guarantee that all brands’ USB memory devices will operate with this Player.
SETTINGS SETUP menu The SETUP menu enables various audio/visual settings and adjustments for functions using the remote control unit. Menu/Submenu System Item Sets the power-saving function to on/off. HDMI Control Sets this Player to receive control signal from the remote control of your TV/AV receiver. 34 Load Default Resets all settings to the default setting except Security setting. 34 Upgrade Performs upgrade of this Player.
SETUP menu Menu/Submenu TV Display Setting Video Process Closed Caption Audio Output Item Page Selects 3D or 2D videos. 37 TV Screen Sets the screen aspect ratio of the connected TV, and adjust the video output. 37 HDMI Resolution Selects the HDMI video output resolution. 37 TV System Selects the TV System from NTSC/PAL/Multi. 37 Color Space Selects Color Space from YCbCr 4:4:4/YCbCr 4:2:2/Full RGB/RGB. 37 HDMI Deep Color Selects HDMI Deep Color from 30 bits/36 bits/48 bits/Off.
SETUP menu ■ Example of SETUP menu operation You need to call up the SETUP menu screen to perform settings for this Player. The following is the explanation for basic operations of the SETUP menu. 4. Select a desired setting. Press 5/a to select On or Off, then press ENTER. REPEAT A/B SUBTITTLE ANGLE CLEAR SEARCH MIRACAST 2ND AUDIO HOME TOP MENU 4 Settings PIP AUDIO SETUP POP-UP MENU Hint – You need to use the number buttons to enter numbers (such as password) for some menu items.
SETUP menu ■ General Setting The default settings are marked with “ * ”. System Load Default You can reset all settings of this Player to default setting except Security setting (p. 35). For details on default settings, see pages 31–39. Upgrade You can upgrade the software manually from USB Storage or Network. For details on software upgrade, refer to “Software upgrade” (p. 42). Auto Power Standby Sets the power-saving function to on/off.
SETUP menu Subtitle You can prioritize the language for Subtitle. DVD-Audio Mode You can select the playback mode for DVD-Audio discs. English, Français, 中文 , Español, Deutsch, Italiano, Nederlandse, Portuguese, Danish, Svenska, Finnish, Norwegian, Polski, Русский, Korean, Japanese, More, Off DVD-AUDIO* Enables playback of DVD-Audio contents as well as DVD-Video contents. (The default settings in [Language] differ depending on your model.
SETUP menu Network Connection setting You can select a network connection method. Wired* Connects the network using Ethernet. Wireless Connects the network using a wireless LAN. You can select settings for a wireless LAN connection. Follow the on-screen instructions to proceed. Scan Searches for an access point. You can connect the access point that is found. Manual You can manually set information for an access point.
SETUP menu ■ Display Setting The default settings are marked with “ * ”. TV 3D Output You can select 3D or 2D video output from this Player. Auto* This Player automatically selects 3D or 2D videos. Off This Player always selects 2D videos. – Even if you set “3D Output” to “Auto” and play back a Blu-ray 3D Disc, this Player selects 2D images depending on the setting of TV, etc. TV Screen You can set the screen aspect ratio of the connected TV, and adjust the video output. If you switch your TV (i.e.
SETUP menu HDMI 1080p 24Hz This outputs the BD-Video encoded in 24Hz frame rate in HDMI 1080p 24Hz. Smoother video playback may be available with this function. This function is available when your TV/AV receiver support this function. For more details on output formats, refer to “About the HDMI video output formats” (p. 41). ■ Audio Setting Auto*, Off Audio Output Note – This setting is disabled when output resolution is other than 1080p. The default settings are marked with “ * ”.
SETUP menu SACD Output Output Priority You can select the output priority from HDMI or Analog for playing back SA-CDs. HDMI* The settings for SACD Priority and HDMI Output are applied. Analog Always plays back the SA-CD’s high quality 2channel area. The signal is fully optimized for analog 2-channel outputs to be best quality. ■ System Information Software version and MAC address (p. 48) are displayed. 4 Note Settings – Selecting Analog mutes the HDMI output when SACD is played back.
SETUP menu ■ About the audio output formats Source format PCM 2ch PCM 5.1ch PCM 7.1ch Dolby Digital with SA or BCS*1 with SA or BCS*1 DTS PCM 5.1ch without SA or BCS*1 with SA or BCS*1 without SA or BCS*1 with SA or BCS*1 without SA or BCS*1 PCM 7.1ch DTS-HD Master Audio without SA or BCS*1 Dolby Digital Dolby Digital PCM up to 5.1ch Dolby Digital Plus PCM up to 7.1ch Dolby TrueHD PCM up to 7.1ch DTS PCM up to 5.1ch*2 PCM up to 7.
SETUP menu SA-CD output formats SACD Output settings (p. 39) Output Priority SACD Priority Multi-ch HDMI 2-ch Multi-ch Analog 2-ch HDMI COAXIAL/OPTICAL MIXED 2CH DSD DSD up to 5.1ch No output 2ch PCM PCM up to 5.
Software upgrade New software that provides additional features or product improvements will be released as needed. We recommend upgrading the software of this Player to the latest version periodically. To check for the availability of a software upgrade, visit http://download.yamaha.com/ Note – Do not remove the USB memory device, set this Player to standby mode or unplug the power cable/network cable while the software upgrade is being performed. ■ Upgrading the software 1.
ADDITIONAL INFORMATION Troubleshooting Refer to the table below when this Player does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off this Player, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. ■ Power Problem Possible causes and solutions No power. – Connect the AC power cable properly. – Press p on the front panel to turn on the power. The Player power is turned off.
Troubleshooting ■ Picture Problem Possible causes and solutions No picture. – Make sure that the cables are connected correctly. (p. 12) – Make sure that the connected TV or the AV receiver is set to the correct input. – With no disc inserted, or playback stopped, press and hold and on the front panel simultaneously to set video resolution to the default value. If a picture is still not output, press and hold on the front panel for approximately 5 seconds to switch NTSC/PAL.
Troubleshooting ■ Network Problem Possible causes and solutions – When connecting to the Internet by selecting Wired in Connection setting, connect the Network cable properly. (p. 36) – Turn on the connected equipment, such as broadband router or modem. – Connect the broadband router and/or modem properly. – If Wireless is selected in Connection setting, and when you want to connect to the Internet using Ethernet, select Wired properly. (p.
Troubleshooting ■ Bluetooth Problem Possible causes and solutions Cannot make the player paired with the Bluetooth device. – Make sure you press Bluetooth and then RED to switch the Player to the pairing mode. – Perform pairing operations with a device which supports A2DP. – Use a Bluetooth device whose password is “0000”. – Move the player and Bluetooth device closer to each other. – Devices that use a 2.
Glossary AVCHD AVCHD is a new format (standard) for high definition video cameras that can be used to record and play highresolution HD images. BD-Live™ BD-Live is a Blu-ray Disc standard that utilizes a network connection, enabling this Player to go online to download promotional videos and other data. BDMV Blu-ray 3D™ Blu-ray 3D enables you to view full high definition 3D images.
Glossary FLAC FLAC (Free Lossless Audio Codec) is an open file format for lossless audio data compression. While inferior in compression rate to other lossy compressed audio formats, it can often provide higher audio quality. HDMI HDMI (High-Definition Multimedia Interface) is an interface that supports both video and audio on a single digital connection.
Specifications ■ General ■ Audio performance ■ Input/output HDMI output .............................................................. Type A connector × 1 480i/576i/480p/576p/720p/1080i/1080p/1080p@24Hz, Deep Color, x.v. Color support Digital output.......................................................... Optical × 1, Coaxial × 1 Analog audio output ..............................................................Mixed 2 ch × 1 USB ...........................................................................
Specifications Java is a registered trademark of Oracle and/or its affiliates. Bluetooth is registered trademark of Bluetooth SIG. DLNA™ and DLNA CERTIFIED™ are trademarks or registered trademarks of Digital Living Network Alliance. All rights reserved. Unauthorized use is strictly prohibited. The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. The Wi-Fi Protected Setup Identifier Mark is a mark of the Wi-Fi Alliance.
ADDITIONAL INFORMATION Index ■ Numerics 2ch Downmix, SETUP menu ...............39 2ND AUDIO, remote control ................9 3D Output, SETUP menu ....................37 3D Playback Message, SETUP menu ...................................34 ■ A ■ H HDMI 1080p 24Hz, SETUP menu ......38 HDMI Control function ........................34 HDMI Control, SETUP menu ..............34 HDMI Deep Color, SETUP menu .......37 HDMI Output .......................................39 HDMI, SETUP menu ..................
Precaución: lea las indicaciones siguientes antes de utilizar este aparato. 1 2 3 4 5 Para asegurar el mejor rendimiento de este aparato, lea atentamente este manual. Y luego guárdelo en un lugar seguro para poder consultarlo en el futuro en caso de ser necesario. Instale esta unidad en un lugar bien ventilado, fresco, seco y limpio, alejado de la luz directa del sol, fuentes de calor, vibración, polvo, humedad y/o frío.
Índice 1. Introducción Qué puede hacer con este reproductor ........... 2 Amplia variedad de discos y formatos de archivo admitidos.................................................................... Características de red mejoradas .................................... Configuración y operaciones sencillas ........................... Características de audio de calidad alta .......................... 2 2 2 2 Piezas incluidas .................................................
INTRODUCCIÓN Qué puede hacer con este reproductor Diversos discos Contenido de transferencia de red Red inalámbrica (compatible con WPS) Contenido USB Contenido PC/NAS (DLNA) Dispositivo Bluetooth (teléfono inteligente, etc.) Contenido de teléfonos inteligentes (Miracast) ■ Amplia variedad de discos y formatos de archivo admitidos – Blu-ray Disc™, DVD, SA-CD y CD (pág. 27) – Blu-ray 3D™ (pág. 12), BONUSVIEW™ y BD-Live™ (pág.
1 Información sobre discos y archivos – En este reproductor se pueden reproducir discos de 12 cm y 8 cm. No utilice un adaptador de 8 cm a 12 cm. – Utilice discos que sean compatibles con los estándares que se indican con la presencia de logotipos oficiales en la etiqueta del disco. La reproducción de discos que no cumplan con estos estándares no está garantizada. Además, la calidad de imagen o sonido no está garantizada aunque puedan reproducirse estos discos.
Información sobre discos y archivos Información sobre la gestión de la región Destino Australia BD-Video Código de región “B” o “ABC” DVD-Video Número de región “4” o “ALL” 4 Rusia Código de región “C” o “ABC” ALL Número de región “5” o “ALL” 5 ALL Acerca de Super Audio CD (SA-CD) – Formato de audio basado en los estándares de CD actuales, pero con un mayor volumen de información y, por tanto, una mayor calidad del sonido. Hay tres tipos de discos: de una capa, de doble capa e híbridos.
Información sobre discos y archivos ■ Precauciones con los discos – Los discos Blu-ray Disc, DVD y CD son sensibles al polvo, a las huellas dactilares y especialmente a los arañazos. Es posible que no se pueda reproducir un disco con arañazos. Maneje los discos con cuidado y guárdelos en un lugar seguro. Almacenamiento apropiado de los discos Ponga el disco en el centro de la caja y almacene la caja y el disco en posición vertical.
Controles y funciones ■ Panel delantero PURE DIRECT SA-CD USB 5V 0.5A 1 2 34 1 p (Encendido/en espera) Pone en marcha el reproductor/activa el modo en espera. Mantenga pulsado p en el panel delantero durante más de 5 segundos para reiniciar el reproductor (se reiniciará el sistema). 5 6 7 8 4 Visor del panel delantero Muestra distintos tipos de información sobre el estado del dispositivo. 5 Puerta de la bandeja portadiscos 6 (Expulsar) Abre/cierra la bandeja portadiscos.
Controles y funciones ■ Panel trasero 1 IN Introducción OUT RS-232C DIGITAL OUT COAXIAL HDMI AC IN NETWORK REMOTE CONTROL AUDIO OUT OPTICAL 1 2 USB 3 4 5 6 7 1 HDMI (pág. 12) 5 AUDIO OUT (L/R) (pág. 14) 2 DIGITAL OUT (COAXIAL/OPTICAL) (pág. 14) 3 USB (pág. 17) 6 REMOTE CONTROL (OUT/IN/RS-232C) (pág. 18) 4 NETWORK (pág. 15) 7 AC IN (pág.
Controles y funciones ■ Mando a distancia 1 Transmisor de señales infrarrojas: Emite la señal infrarroja. Oriente esta ventana al sensor del mando a distancia (pág. 11). Nota – aparecerá en la esquina superior izquierda de la pantalla cuando la tecla pulsada no esté disponible.
Controles y funciones E SETUP: Muestra la pantalla de menú SETUP (pág. 31). 1 F STATUS: Muestra la información de reproducción (pág. 28). G DIMMER: Cambia el brillo de la pantalla del panel delantero en cuatro pasos. H Bluetooth: Inicia Bluetooth (pág. 24). Nota – La Marca Audio Secundario se muestra solo cuando la Marca Audio Secundario está activada (pág. 35). 0 HOME: Muestra la pantalla de menú HOME (pág. 20). A TOP MENU BD DVD : Muestra la pantalla de menú principal si el disco contiene un menú.
Controles y funciones P POP-UP/MENU BD DVD : Muestra el menú emergente. Los contenidos del menú que aparecen varían en función del disco. Encontrará más información sobre cómo ver y controlar el menú emergente en el manual del disco. La pantalla del menú principal aparece a veces al pulsar POP-UP/MENU dependiendo del DVD.
Controles y funciones Instalación de las pilas en el mando a distancia 3 2 Notas 1 Configuración del mando a distancia Para modificar el ID de ID1 a ID2, mantenga pulsado el botón de color rojo y 2 de los botones numéricos simultáneamente durante 7 segundos. Para modificar el ID de ID2 a ID1, mantenga pulsado el botón de color rojo y 1 de los botones numéricos simultáneamente durante 7 segundos.
CONEXIONES Conexiones de vídeo/audio Realice las conexiones de los cables de vídeo/audio correspondientes en el equipo que desee usar. Consejos – Consulte la página 40 para obtener información sobre los formatos de salida de audio/vídeo. – Prepare los cables de venta en el mercado necesarios para las conexiones. El tipo y el número de cables que necesita varían en función del equipo que se va a conectar.
Conexiones de vídeo/audio ■ Conexión con un televisor a través de un receptor de A/V ■ Conexión directa con un televisor Conecte este reproductor al televisor con un cable HDMI. Conecte este reproductor al receptor de A/V y el receptor de A/V al televisor con cables HDMI. Para más detalles sobre las conexiones de los altavoces, consulte los manuales de instrucciones del receptor de A/ V y de los altavoces.
Conexiones de vídeo/audio ■ Conexión con un televisor y un equipo de audio Conecte este reproductor al televisor con un cable HDMI, y este reproductor al equipo de audio con un cable de audio (cable óptico digital, coaxial digital o de clavijas estéreo). ¡Precaución! No conecte el cable de alimentación del reproductor hasta haber realizado todas las conexiones.
Conexión de red Si conecta este reproductor a la red (inalámbrica o con cable), puede utilizar las funciones siguientes. – Reproducción de contenido de un servidor DLNA (PC o NAS) (pág. 20) – Reproducción de distintos contenidos del servicio de red (pág. 22) – Reproducción de discos compatibles con BD-Live (pág. 29) – Uso de este reproductor desde dispositivos móviles (AV CONTROLLER) (pág. 26) 2 – Para utilizar los servicios de red o la función BD-Live, se necesita una conexión a Internet de banda ancha.
Conexión de red ■ Configuración de servidor DLNA Mediante el uso de DLNA, puede compartir contenido multimedia (como vídeos, música y fotos) almacenado en su servidor DLNA (PC o NAS) conectado a su red, y disfrutar de ese contenido con el reproductor. Además, puede utilizar su dispositivo móvil (como un teléfono inteligente y una tableta) como un controlador inalámbrico para controlar este reproductor a través de la red.
Conexión USB Si conecta un dispositivo de memoria USB al conector USB en el panel delantero o trasero de este reproductor, puede reproducir archivos multimedia almacenados en el dispositivo de memoria USB (pág. 20). – Yamaha no puede garantizar que los dispositivos de memoria USB de todas las marcas funcionen con este reproductor. – Conecte un dispositivo de memoria USB a uno de los conectores USB (delantero/trasero) de este reproductor cuando utilice la función BD-Live (pág. 30).
Otras conexiones ■ Conexión con las tomas REMOTE CONTROL – Puede transmitir y recibir las señales del mando a distancia conectando a las tomas REMOTE CONTROL (OUT/IN). – Conecte con firmeza cables con mini clavija mono de 3,5 mm (de venta en el mercado) en las tomas REMOTE CONTROL (OUT/IN). ¡Precaución! No conecte el cable de alimentación del reproductor hasta haber realizado todas las conexiones.
REPRODUCCIÓN Ajustes iniciales ■ Configuración con la Configuración Sencilla 3 Pulse 2/3 para seleccionar Sí y, a continuación, pulse ENTER. La Configuración Sencilla le permite definir fácilmente el idioma, la resolución y la relación de aspecto de la pantalla. La pantalla de la Configuración Sencilla aparece la primera vez que enciende este reproductor después de comprarlo. La misma configuración se puede realizar desde el menú SETUP = Sistema = Configuración Sencilla.
Menú HOME El menú HOME le permite realizar las siguientes operaciones básicas de este reproductor. – Búsqueda y reproducción de archivos multimedia en distintos discos, dispositivos de memoria USB y sus servidores DLNA (PC o NAS) – Acceso a diversos servicios de red (pág. 22) – Visualización del menú SETUP (pág. 31) Consejos – Para obtener información sobre los discos y formatos que se pueden reproducir, consulte la página 3.
Menú HOME Nota – Tenga en cuenta que en el siguiente paso solo se mostrarán los archivos del tipo que seleccione en este paso. Por ejemplo, si selecciona la carpeta Foto en este paso, solo se mostrarán archivos de fotos después de este paso. 4 Seleccione la carpeta que contiene el archivo que desea reproducir. Durante la visualización de fotos, los botones del mando a distancia funcionan como se indica a continuación. : Detiene el pase de diapositivas y vuelve al explorador de archivos.
Uso de servicios de red Puede disfrutar de contenido multimedia (como fotos y vídeos) utilizando los siguientes servicios de red. – Dropbox – Álbumes Web de Picasa – YouTube Notas – El acceso a contenidos suministrados por terceros requiere una conexión a Internet de alta velocidad y, a veces, también un registro de cuenta y una suscripción de pago.
Uso de servicios de red ■ Acerca de Dropbox™ Dropbox es un servicio de red que le permite poner su contenido en Dropbox y obtenerlo de sus ordenadores, teléfonos o tabletas. Agrega automáticamente fotos y muestra vídeo desde cualquier lugar. Más información en www.dropbox.com 3 Reproducción Dropbox es una marca comercial de Dropbox Inc. ■ Acerca de álbumes Web de Picasa™ Álbumes Web de Picasa es un servicio de red que permite a los usuarios compartir fotos con amigos y familia o explorar fotos públicas.
Disfrutar de música a través de Bluetooth® Puede disfrutar de música reproducida en un dispositivo Bluetooth (teléfono inteligente, etc.) en este reproductor. Receptor de A/V Este reproductor PURE DIRECT SA-CD USB 5V 0.5A ♪ Dispositivo Bluetooth (teléfono inteligente, etc.) Consejos – El “emparejamiento” es necesario para cada dispositivo Bluetooth que utilice. – Utilice un dispositivo Bluetooth a menos de 10 metros de este reproductor.
Disfrutar de música a través de Bluetooth® ■ Reproducción de contenido del dispositivo Bluetooth Notas – Si ya hay cualquier dispositivo Bluetooth conectado a este reproductor, finalice la conexión Bluetooth antes de conectarse a otro dispositivo Bluetooth. – Al utilizar Bluetooth, no puede usar la bandeja portadiscos ni reproducir otras fuentes. 3 Reproducción 1 Si hay una reproducción de otra fuente en curso, deténgala.
Uso de imágenes y vídeos de teléfonos inteligentes en la pantalla del televisor (Miracast™) Miracast es una solución para una perfecta visualización de vídeo entre dispositivos, sin cables ni una conexión de red a través de un punto de acceso (Wi-Fi Direct). Puede realizar distintas acciones, como ver imágenes desde un dispositivo compatible con Miracast (teléfono inteligente, etc.) en la pantalla del televisor conectado a este reproductor.
Funciones avanzadas de reproducción En este capítulo se explica la reproducción de discos Blu-ray Disc, DVD, SA-CD y CD de venta en el mercado, así como de discos DVD-RW/R grabados. Nota ■ Menú en pantalla Para mostrar el menú en pantalla, pulse ON SCREEN. A continuación, pulse 5/a/2/3 para seleccionar un elemento y, después, pulse ENTER para utilizar la función deseada.
Funciones avanzadas de reproducción ■ Menú de estado Muestra varios ajustes, cómo los subtítulos, el ángulo y el número de título/capítulo/pista reproducido. Para mostrar el menú de estado, pulse STATUS. El menú de estado consta de los siguientes menús.
Funciones avanzadas de reproducción ■ Programación de la reproducción DVD CD ■ Uso de la búsqueda Esta opción le permite programar el orden de reproducción de las pistas de un disco de audio o de los capítulos de un DVD. Pulse PROGRAM durante la reproducción para mostrar la ventana PROGRAMA para programar el orden de reproducción. Puede programar hasta 15 pistas/capítulos. Esta opción le permite ir a un punto específico durante la reproducción. 1 Pulse PROGRAM durante la reproducción.
Funciones avanzadas de reproducción ■ Utilización de la función Imagen en Imagen (reproducción de audio/vídeo secundario) El Vídeo BD que incluye audio y vídeo secundario compatible con Imagen en Imagen se puede reproducir con audio y vídeo secundario simultáneamente como un vídeo pequeño en la esquina. Vídeo principal Vídeo secundario Notas – Yamaha no puede garantizar que los dispositivos de memoria USB de todas las marcas funcionen con este reproductor.
AJUSTES Menú SETUP El menú SETUP permite realizar diversos ajustes y configuraciones audiovisuales en las funciones utilizando el mando a distancia. Menú/submenú Sistema Configuración General Reproducción Red Página 34 Control HDMI Configura el reproductor para que reciba la señal de control desde el mando a distancia de su televisor/receptor de A/V. 34 Cargar configuracion por defecto Restablece todos los ajustes a los valores predeterminados, excepto el ajuste Seguridad.
Menú SETUP Menú/submenú TV Configuración de pantalla Procesamiento de Video Subtítulos Opción Función Página Salida 3D Selecciona vídeos en 3D o 2D. 37 Pantalla de TV Ajusta la relación de aspecto de la pantalla del televisor conectado y ajusta la salida de vídeo. 37 Resolución HDMI Permite seleccionar la resolución de salida de vídeo HDMI. 37 Sistema de TV Permite seleccionar el sistema de TV entre NTSC/PAL/ Multi.
Menú SETUP ■ Ejemplo de funcionamiento del menú SETUP Debe acceder a la pantalla del menú SETUP para realizar ajustes en el reproductor. A continuación se explican las operaciones básicas del menú SETUP. 4. Seleccione el ajuste deseado. Pulse 5/a para seleccionar Activar o Desactivar y, a continuación, pulse ENTER.
Menú SETUP ■ Configuración General Standby Automático Activa o desactiva la función de ahorro de energía. Cuando se active, el reproductor pasará al modo de protector de pantalla si no se utiliza durante 5 minutos. Posteriormente, el reproductor pasará al modo de espera cuando no se utilice durante 15 minutos. Cargar configuracion por defecto Puede restablecer todos los ajustes de este reproductor al ajuste predefinido, excepto el ajuste Seguridad (pág. 35).
Menú SETUP Subtítulo Puede dar prioridad al idioma de los subtítulos. English, Français, 中文 , Español, Deutsch, Italiano, Nederlandse, Portugués, Danés, Svenska, Finlandés, Noruego, Polski, Русский, Corea, Japonés, Más, Desactivar (Los ajustes predeterminados de [Idioma] varían en función del modelo). Modo DVD-Audio Puede seleccionar el modo de reproducción para discos DVD-Audio. DVD-AUDIO* Permite la reproducción de contenido de DVDAudio así como de DVD-Video.
Menú SETUP Red Configuración de conexión Permite seleccionar un método de conexión de red. Cableado* Se conecta a la red mediante Ethernet. Inalámbrico Se conecta a la red mediante una conexión LAN inalámbrica. Permite seleccionar la configuración para una conexión LAN inalámbrica. Siga las instrucciones en pantalla para llevar a cabo la operación. Buscar Redes Busca un punto de acceso. Permite conectarse al punto de acceso encontrado.
Menú SETUP ■ Configuración de pantalla Los ajustes predeterminados están marcados con “ * ”. TV Salida 3D Puede seleccionar la salida de vídeo en 3D o 2D desde este reproductor. Este reproductor selecciona automáticamente vídeos en 3D o 2D. Desactivar Este reproductor siempre selecciona vídeos en 2D. Nota – Aunque ajuste “Salida 3D” en “Auto” y reproduzca un disco Blu-ray 3D, este reproductor selecciona imágenes en 2D en función del ajuste del televisor, etc.
Menú SETUP HDMI 1080p 24Hz Permite la salida de vídeo BD codificado con una relación de cuadro de 24 Hz en HDMI 1080p 24Hz. Con esta función es posible que disfrute de una reproducción de vídeo más fluida. Esta función está disponible si su televisor o receptor de A/V admite dicha función. Para obtener más información sobre los formatos de salida, consulte “Acerca de los formatos de salida de vídeo HDMI” (pág. 41).
Menú SETUP Salida SACD Prioridad Salida Puede seleccionar la prioridad de salida entre HDMI y Analógica para reproducir discos SA-CD. HDMI* Se aplican los ajustes de Prioridad SACD y Salida HDMI. Analógica Reproduce siempre el área de 2 canales de alta calidad de los SA-CD. La señal se optimiza para las salidas analógicas de 2 canales, para obtener la máxima calidad. ■ Sistema de Información Se muestran la versión del software y la dirección MAC (pág. 47).
Menú SETUP ■ Acerca de los formatos de salida de audio Formato de origen PCM 2 canales PCM 5.1 canales PCM 7.1 canales Dolby Digital con SA o BCS*1 con SA o BCS*1 DTS PCM 5.1 canales sin SA o BCS*1 con SA o BCS*1 sin SA o BCS*1 con SA o BCS*1 sin SA o BCS*1 con SA o DTS HD High BCS*1 Resolution sin SA o BCS*1 con SA o BCS*1 DTS-HD Master Audio sin SA o BCS*1 Dolby Digital Bitstream PCM 7.
Menú SETUP Formatos de salida SA-CD Ajustes de Salida SACD (pág. 39) Prioridad Salida Prioridad SACD HDMI COAXIAL/OPTICAL MIXED 2CH DSD DSD hasta 5.1 canales Sin salida 2 canales PCM PCM hasta 5.
Actualización de software El nuevo software que proporciona características adicionales o mejoras del producto se comercializará según sea necesario. Se recomienda actualizar periódicamente el software de este reproductor a la versión más reciente. Para comprobar la disponibilidad de una actualización de software, visite http://download.yamaha.
INFORMACIÓN ADICIONAL Resolución de problemas Consulte la tabla que aparece a continuación cuando el reproductor no funcione correctamente. Si el problema que tiene no aparece en la lista siguiente o las instrucciones no le sirven de ayuda, apague este reproductor, desenchufe el cable de alimentación y póngase en contacto con el centro de servicio o concesionario Yamaha autorizado más cercano. ■ Alimentación Problema Posibles causas y soluciones No hay alimentación.
Resolución de problemas ■ Imagen Problema Posibles causas y soluciones No hay imagen. – Asegúrese de que los cables están correctamente conectados. (pág. 12) – Asegúrese de que el televisor o receptor de A/V conectado está ajustado a la entrada correcta. – Sin ningún disco cargado o con la reproducción parada, mantenga pulsados los botones y del panel delantero simultáneamente para restaurar el valor predeterminado de la resolución del vídeo.
Resolución de problemas ■ Red Problema Posibles causas y soluciones – Cuando se conecte a Internet seleccionando Cableado en Configuración de conexión, conecte el cable de red correctamente. (pág. 36) – Encienda el equipo conectado como, por ejemplo, un módem o router de banda ancha. – Conecte correctamente el módem y/o el enrutador de banda ancha. – Si Inalámbrico está seleccionado en Configuración de conexión y se conecta a Internet mediante Ethernet, seleccione Cableado correctamente. (pág.
Resolución de problemas ■ Bluetooth Problema Posibles causas y soluciones El reproductor no puede emparejarse con el dispositivo Bluetooth. – Asegúrese de pulsar Bluetooth y, a continuación, RED para cambiar el reproductor al modo de emparejamiento. – Realice las operaciones de emparejamiento con un dispositivo compatible con A2DP. – Utilice un dispositivo Bluetooth cuya contraseña sea “0000”. – Mueva el reproductor y el dispositivo Bluetooth para acercarlos entre sí.
Glosario AVCHD AVCHD es un nuevo formato (estándar) para cámaras de vídeo de alta definición que se puede utilizar para grabar y reproducir imágenes de alta resolución HD. BD-Live™ BD-Live es un estándar de Blu-ray Disc que utiliza una conexión de red y permite al reproductor conectarse a Internet para descargar vídeos promocionales y otros datos. BDMV Blu-ray 3D™ Blu-ray 3D le permite ver imágenes 3D de alta definición completa.
Glosario DTS Un sistema de sonido digital desarrollado por DTS, Inc. para su uso en salas de cine. DTS-HD High Resolution Audio DTS-HD High Resolution Audio es una nueva tecnología desarrollada para el formato de disco óptico de alta definición de la próxima generación. DTS-HD Master Audio DTS-HD Master Audio es una tecnología de compresión de audio sin pérdidas desarrollada para el formato de disco óptico de alta definición de la próxima generación.
Especificaciones ■ Información general ■ Rendimiento de audio Nivel de salida de audio (1 kHz, 0 dB) Blu-ray Disc/DVD/CD-DA.........................................................2 ± 0,3 V Relación señal/ruido Blu-ray Disc/DVD/CD-DA............................................................ 115 dB Rango dinámico Blu-ray Disc/DVD ......................................................................... 110 dB CD-DA ...........................................................................................
Especificaciones Java es una marca comercial registrada de Oracle y/o sus filiales. Bluetooth es una marca comercial registrada de Bluetooth SIG. DLNA™ y DLNA CERTIFIED™ son marcas comerciales o marcas comerciales registradas de Digital Living Network Alliance. Todos los derechos reservados. Se prohíbe terminantemente el uso no autorizado. El logotipo Wi-Fi CERTIFIED es una marca de certificación de Wi-Fi Alliance. La marca de identificación Wi-Fi Protected Setup es una marca de Wi-Fi Alliance.
INFORMACIÓN ADICIONAL Índice ■ Numerics 2ND AUDIO, mando a distancia ...........9 ■ A ■ B BD-Live ...............................................30 Bitrate, menú en pantalla .....................27 Bluetooth ..............................................24 Botones de colores, mando a distancia ..............................8 Botones de control, mando a distancia ..............................9 Botones de cursor, mando a distancia ....9 Botones numéricos, mando a distancia ...........................
Information about third party software licenses This product incorporates the following third party software. For information (copyright, etc) about each software, please read the terms and conditions stated below. By using this product, you will be deemed to have accepted the terms and conditions.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices.
To “convey” a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction with a user through a computer network, with no transfer of a copy, is not conveying.
c) Prohibiting misrepresentation of the origin of that material, or requiring that modified versions of such material be marked in reasonable ways as different from the original version; or d) Limiting the use for publicity purposes of names of licensors or authors of the material; or e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or f) Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or modif
END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program.
GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called “this License”). Each licensee is addressed as “you”.
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this License. 11.
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a “work based on the library” and a “work that uses the library”. The former contains code derived from the library, while the latter only works together with the library. Note that it is possible for a library to be covered by the ordinary General Public License rather than by this special one.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices.
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
■ About protobuf Copyright © 2008, Google Inc. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Please replace with the value from the FreeType version you actually use. Legal Terms 0. Definitions Throughout this license, the terms ‘package’, ‘FreeType Project’, and ‘FreeType archive’ refer to the set of files originally distributed by the authors (David Turner, Robert Wilhelm, and Werner Lemberg) as the ‘FreeType Project’, be they named as alpha, beta or final release.
All Rights Reserved except as specified below. Permission is hereby granted to use, copy, modify, and distribute this software (or portions thereof) for any purpose, without fee, subject to these conditions: (1) If any part of the source code for this software is distributed, then this README file must be included, with this copyright and no-warranty notice unaltered; and any additions, deletions, or changes to the original files must be clearly indicated in accompanying documentation.
00_BD-A1040_P_cv.fm Page 1 Tuesday, May 27, 2014 4:56 PM The laser component in this product is capable of emitting radiation exceeding the limit for Class 1. LASER Specification: Class 1 LASER Product Wave length: 790 nm (CDs)/658 nm (DVDs)/405 nm (BDs) Laser output: max.